The assumption in zio_ddt_free() is that ddt_phys_select() must
always find a match. However, if that fails due to a damaged
DDT or some other reason the code will NULL dereference in
ddt_phys_decref().
While this should never happen it has been observed on various
platforms. The result is that unless your willing to patch the
ZFS code the pool is inaccessible. Therefore, we're choosing
to more gracefully handle this case rather than leave it fatal.
http://mail.opensolaris.org/pipermail/zfs-discuss/2012-February/050972.html5dc6af0eec
Reported by: Pierre Beyssac
Obtained from: OpenZFS
MFC after: 2 weeks
Sponsored by: Klara Inc.
There are cases when gif_interfaces cannot be replaced
with cloned_interfaces, such as tunnels with external IPv6 addresses
and internal IPv4 or vice versa. Such configuration requires
extra invocation of ifconfig(8) and supported with gif_interfaces only.
Fix manual page and provide some examples.
MFC after: 1 week
X-MFC-With: 362502
There are cases when gif_interfaces cannot be replaced
with cloned_interfaces, such as tunnels with external IPv6 addresses
and internal IPv4 or vice versa. Such configuration requires
extra invocation of ifconfig(8) and supported with gif_interfaces only.
MFC after: 1 week
This file is the only SCTP source file compiled into the kernel when
SCTP_SUPPORT is configured. sctp_delayed_checksum() references a couple
of counters defined in system_base_info, so the change allows these
counters to be referenced in a kernel compiled without "options SCTP".
Submitted by: tuexen
MFC with: r362338
When the PCI address != physical address we need to translate from the
former to the latter before passing to the parent to map into the kernels
virtual address space.
Sponsored by: Innovate UK
It's interesting that similar messages from gpiobus_acquire_pin never
had any prefix while gpiobus_release_pin messages were prefixed with
"gpiobus_acquire_pin".
Anyway, the prefix is not that useful and can be deduced from context.
MFC after: 2 weeks
- Fix formatting issues such as:
- Use Ql instead of Dq Li as Li is deprecated
- Address some mandoc warnings
- Add arguments missing from the list of options (i.e., document "-k keep"
instead of just "-k").
- Document that -k and -s can be specified multiple times
- Use sshd instead of named for the example in the BUGS section, as named
is not in the base system. Also, use Nm instead of Xr there as it is not
the sshd binary that is required to be running, but the service.
- Use Sy instead of Cm for KEYWORDS. Cm is reserved for command-line
modifiers of the CLI.
- Add an EXAMPLES section
- Cross-reference service(8).
MFC after: 2 weeks
The Raspbery Pi computers do not properly implement PSCI. The canonical
way to reset them is to set a watchdog timer and allow it to expire.
Submitted by: Robert Crowston <crowston_protonmail.com>
Differential Revision: https://reviews.freebsd.org/D25268
fibX_lookup_nh_ext().
fibX_lookup_nh_ represents pre-epoch generation of fib kpi,
providing less guarantees over pointer validness and requiring
on-stack data copying.
Reviewed by: np
Differential Revision: https://reviews.freebsd.org/D24975
As of r362452, liblzma depends on libmd but the buildworld build order
hadn't been amended to document the new dependency.
Reported by: jenkins via freqlabs
X-MFC-With: r362452
libucl comes with a Lua library binding. Build it into flua.
This lets us parse/generate config files in the various formats supported by
libucl with flua. For example, the following script will detect the format of
an object written to stdin as one of UCL config, JSON, or YAML and write it to
stdout as pretty-printed JSON:
local ucl = require('ucl')
local parser = ucl.parser()
parser:parse_string(io.read('*a'))
local obj = parser:get_object()
print(ucl.to_format(obj, 'json'))
Reviewed by: kevans, pstef
Approved by: mmacy (mentor)
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D25009
is used by the IPPROTO_SCTP level socket options SCTP_GET_PEER_ADDRESSES
and SCTP_GET_LOCAL_ADDRESSES, which are used by libc to implement
sctp_getladdrs() and sctp_getpaddrs().
These changes allow an old libc to work on a newer kernel.
sizeof pointer before [r354857]), we need to zero MAXVIFS times the size of
the struct. All good things come in threes; I hope this is it on this one.
PR: 246629, 206583
Reported by: kib
MFC after: ASAP
- a cloneattach failure will not currently be handled correctly,
jump to the right target
- pseudo devices are all treat as if they're ethernet devices -
this often doesn't make sense
MFC after: 1 week
Sponsored by: Netgate, Inc.
Differential Revision: https://reviews.freebsd.org/D25083
This OID was added in r17352 but the write path of IFDATA_LINKSPECIFIC
seems unused as there are no in-base writers, and as far as I can tell
we had issues with this code before, see PR 219472. Drop the write path
to make the handler read-only as described in comments and man-pages.
It can be marked as MPSAFE now.
Reviewed by: bdragon, kib, melifaro, wollman
Approved by: kib (mentor)
Sponsored by: Mysterious Code Ltd.
Differential Revision: https://reviews.freebsd.org/D25348
Use locale-based string format specifiers when printing
the process names/arguments.
Reviewed by: pstef
Differential Revision: https://reviews.freebsd.org/D25174
For software like PostgreSQL and SQLite that sometimes reads sequentially
while also writing sequentially some distance behind with interleaved
syscalls on the same fd, performance is better on UFS if we do
sequential access heuristics separately for reads and writes.
Patch originally by Andrew Gierth in 2008, updated and proposed by me with
his permission.
Reviewed by: mjg, kib, tmunro
Approved by: mjg (mentor)
Obtained from: Andrew Gierth <andrew@tao11.riddles.org.uk>
Differential Revision: https://reviews.freebsd.org/D25024
It turns out relocating the symbol table itself can cause issues, like fbt
crashing because it applies the offsets to the kernel twice.
This had been previously brought up in rS333447 when the stoffs hack was
added, but I had been unaware of this and reimplemented symtab relocation.
Instead of relocating the symbol table, keep track of the relocation base
in ddb, so the ddb symbols behave like the kernel linker-provided symbols.
This is intended to be NFC on platforms other than PowerPC, which do not
use fully relocatable kernels. (The relbase will always be 0)
* Remove the rest of the stoffs hack.
* Remove my half-baked displace_symbol_table() function.
* Extend ddb initialization to cope with having a relocation offset on the
kernel symbol table.
* Fix my kernel-as-initrd hack to work with booke64 by using a temporary
mapping to access the data.
* Fix another instance of __powerpc__ that is actually RELOCATABLE_KERNEL.
* Change the behavior or X_db_symbol_values to apply the relocation base
when updating valp, to match link_elf_symbol_values() behavior.
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D25223
Without this patch, clnt_vc_soupcall() first does a soreceive() for
4 bytes (the Sun RPC over TCP record mark) and then soreceive(s) for
the RPC message.
This first soreceive() almost always results in an mbuf allocation,
since having the 4byte record mark in a separate mbuf in the socket
rcv queue is unlikely.
This is somewhat inefficient and rather odd. It also will not work
for the ktls rx, since the latter returns a TLS record for each
soreceive().
This patch replaces the above with code similar to what the server side
of the krpc does for TCP, where it does a soreceive() for as much data
as possible and then parses RPC messages out of the received data.
A new field of the TCP socket structure called ct_raw is the list of
received mbufs that the RPC message(s) are parsed from.
I think this results in cleaner code and is needed for support of
nfs-over-tls.
It also fixes the code for the case where a server sends an RPC message
in multiple RPC message fragments. Although this is allowed by RFC5531,
no extant NFS server does this. However, it is probably good to fix this
in case some future NFS server does do this.
for the IPPROTO_SCTP level socket options SCTP_BINDX_ADD_ADDR and
SCTP_BINDX_REM_ADDR. These socket option are intended for internal
use only to implement sctp_bindx().
This is one user of struct sctp_getaddresses less.
struct sctp_getaddresses is strange and will be changed shortly.
root of the too-short tree is black and at least one of the children
of that sibling is red, either one or two rotations finish the
rebalancing. In the case when both of the children are red, the
current implementation uses two rotations where only one is
necessary. This change removes that extra rotation, and in that case
also removes a needless black-to-red-to-black recoloring.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D25335
FreeBSD madvise(2) directly. While some of the flag values match,
most don't.
PR: kern/230160
Reported by: markj
Reviewed by: markj
Discussed with: brooks, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25272
Once tx mbufs have been handed to hardware, nothing serializes the tx
path against completion and potential use-after-free of the outbound
mbuf. Perform accounting and BPF tap before queueing to hardware to
avoid this race.
Submitted by: Steve Wirtz <steve_wirtz AT dell.com>
Reviewed by: markj, rstone
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D25364
For the sake of the record, this is the last use of the words master and slave
in the FreeBSD's USB stack, drivers and subsystems.
MFC after: 1 week
Sponsored by: Mellanox Technologies
* Add a small description before the EXAMPLES that are already in the man page
to explicitely state what we are trying to show instead of having the user
guess what the example is doing.
* Add two more examples to show usage of -s, -t and -f
* mandoc -Tlint reports irrelevant use of .Tn so remove them since according to
mdoc(7) it is there only for compatibility and should not be used in new
manuals.
Approved by: 0mp@
