to global hostname and domainname variables. Where necessary, copy
to or from a stack-local buffer before performing copyin() or
copyout(). A few uses, such as in cd9660 and daemon_saver, remain
under-synchronized and will require further updates.
Correct a bug in which a failed copyin() of domainname would leave
domainname potentially corrupted.
MFC after: 3 weeks
where it is used. [1]
Don't leak file descriptors in write_entry_backend if archive_write_header
returns ARCHIVE_FAILED.
Found by: Coverity Prevent [1]
schedule a chmod() fixup for directories. In particular, this fixes
sgid handling on systems where the sgid bit is inherited from the
parent directory (which means that the actual mode of the dir
does not match the mode used in the mkdir() system call.
It may be possible to tighten this condition a bit. In
working through this, I also found a few other places where
it looks like we can avoid a redundant syscall or two. I've
commented those here but not yet tried to address them.
AcpiEvaluateObject() calls, otherwise, we are not able to bring devices
back up (NULL means 0, hence always off).
While there add missing WLAN on/off support.
MFC after: 3 days
Pointy hat to: rpaulo
MPSAFE patches on current@ and stable@. This driver also has a fundamental
issue in that it sleeps when sending commands to the card including in the
if_init/if_start routines (which can be called from interrupt context). As
such, the driver shouldn't be working reliably even on 4.x.
- Add a mutex to the softc and use it to protect the softc and device
hardware.
- Setup interrupt handler after ether_ifattach().
- Remove unused sbsh_watchdog() routine.
- Protect against concurrent attempts to load firmware.
possible to exhaust and garble stack with a packet that contains a couple
of hundreds nested encapsulation levels.
Submitted by: Ming Fu <fming@borderware.com>
Reviewed by: rwatson
PR: kern/85320
- Add a mutex to the softc and use it to protect the softc and device
hardware.
- Setup interrupt handler after attaching device to network stack.
- Use device_set_desc() rather than device_quiet() plus a manual printf
that simulates the normal probe printf.
- Axe next_sbni_unit and instead just leave room for two sbni devices for
each bus attachment.
- Don't bzero the already-zero'd softc.
- Add a detach method to the PCI driver.
- Add a lock to protect the list of available devices used to chain
interrupt handlers for dual port ISA cards.
- Remove unused watchdog routine.
- If if_alloc() fails, make sbni_attach() return an error rather than
panic'ing.
- Consolidate code to free bus resources into sbni_release_resources().
- Clear IFF_DRV_RUNNING|OACTIVE in stop() routine instead of in callers.
- Let ether_ioctl() handle SIOCSIFMTU.
and stable@. It also is a driver for an older non-802.11 wireless PC card
that is quite slow in comparison to say, wi(4). I know Warner wants this
driver axed as well.
- Add a mutex to the softc and use it to lock the softc and device hardware.
- Use a private timer to replace if_watchdog/if_timer.
- Use if_printf() rather than if_xname.
- Setup interrupt handler after ether_ifattach().
current@ and stable@ for the locking patches. The driver can always be
revived if someone tests it.
This driver also sleeps in its if_init routine, so it likely doesn't really
work at all anyway in modern releases.
- Add a mutex to the softc and use it to protect the softc and device
hardware.
- Setup interrupt handler after interface attach.
- Retire 'unit' from softc and use if_printf() instead.
- Don't frob IFF_UP in the driver.
- Use callout_() rather than timeout() and untimeout().
- Add a mutex to the softc and use it to protect the softc and device
hardware.
- Setup interrupt handler after ether_ifattach().
- Use a private timer instead of if_timer/if_watchdog.
- Retire arl_unit from the softc and use if_printf() and device_printf()
instead.
Note that the unpatched driver in 6.x and later does not work with the
hardware, so the one person who had volunteered to test the patch wasn't
able to test it.
dispatched without Giant, and add NETISR_FORCEQUEUE, which allows specific
netisr handlers to always be dispatched via a queue (deferred). Mark the
usb and if_ppp netisr handlers as NETISR_FORCEQUEUE, and explicitly
acquire Giant in those handlers.
Previously, any netisr handler not marked NETISR_MPSAFE would necessarily
run deferred and with Giant acquired. This change removes Giant
scaffolding from the netisr infrastructure, but NETISR_FORCEQUEUE allows
non-MPSAFE handlers to continue to force deferred dispatch so as to avoid
lock order reversals between their acqusition of Giant and any calling
context.
It is likely we will be able to remove NETISR_FORCEQUEUE once
IFF_NEEDSGIANT is removed, as non-MPSAFE usb and if_ppp drivers will no
longer be supported.
Reviewed by: bz
MFC after: 1 month
X-MFC note: We can't remove NETISR_MPSAFE from stable/7 for KPI reasons,
but the rest can go back.
soun->sun_path isn't a null-terminated string. As UNIX(4) states, "the
terminating NUL is not part of the address." Since strlcpy has to return
"the total length of the string [it] tried to create," it walks off the end
of soun->sun_path looking for a \0.
This reverts r105332.
Reported by: Ryan Stone
I wrote these to test amd64 asm functions that used
maxss, maxsd, minss, and minsd, but it turns out that
those instructions don't handle NaNs and signed zero
in the same way as fmin() and fmax() are required to,
so we're stuck with the C versions for now.
[/] root@ed-exigent>ldd `which httpd`
ldd: /usr/local/sbin/httpd: can't read program header
ldd: /usr/local/sbin/httpd: not a dynamic executable
But...
[/] root@ed-exigent>LD_32_TRACE_LOADED_OBJECTS==1 `which httpd`
libm.so.4 => /lib32//libm.so.4 (0x280c8000)
libaprutil-1.so.2 => /usr/local/lib/libaprutil-1.so.2 (0x280de000)
libexpat.so.6 => /usr/local/lib/libexpat.so.6 (0x280f2000)
libiconv.so.3 => /usr/local/lib/libiconv.so.3 (0x28110000)
libapr-1.so.2 => /usr/local/lib/libapr-1.so.2 (0x281fd000)
libcrypt.so.3 => /lib32//libcrypt.so.3 (0x2821d000)
libpthread.so.2 => not found (0x0)
libc.so.6 => /lib32//libc.so.6 (0x28235000)
libpthread.so.2 => /usr/lib32/libpthread.so.2 (0x2830d000)
Added support in ldd(1) for the LD_32_xxx environment variables if
the architecture of the machine is >32 bits. If we ever go to 128
bit architectures this excercise will have to be repeated but thanks
to earlier commits today it will be relative simple.
PR: bin/124906
Submitted by: edwin
Approved by: bde (mentor)
MFC after: 1 week
the main-loop into a seperate function.
Instead of using hardcoded environment variables, define them in a
lookup table.
For the rest, no functionality changes.
Approved by: bde (mentor)
MFC after: 1 week
obsoleted by gpart(8). This avoids the following bugs in fdisk:
- initializing a disk without MBR bogusly emits the error:
fdisk: invalid fdisk partition table found
- initializing a disk with or without MBR bogusly emits either:
fdisk: Class not found
or
fdisk: Geom not found: "XXX"
- the default geometry for non-ATA and non-SCSI disks is either
invalid or sub-optimizal.
RELEASE_CRUNCH builds use NO_MAN anyway, so this change is primarily
to avoid that developers have to set NO_MAN manually when they build
the static variant.
