in bitfield argument is wrong, as it will be treated as bit 10, causing any
code printing >=10 bits with bit 10 on as having a trailing comma.
Newline (intended one) should be part of the format string (already present
in the examples).
Also fix grammar and kill EOL whitespace in comment while here.
PR: 195005
Approved by: bdrewery
I edited the original change to retain the use of arc4random() as a seed for
the hashing as a very basic defense against intentional lagg port selection.
The author's original commit message (edited slightly):
sys/net/ieee8023ad_lacp.c
sys/net/if_lagg.c
In lagg_hashmbuf, use the FNV hash instead of the old
hash32_buf. The hash32 family of functions operate one octet
at a time, and when run on a string s of length n, their output
is equivalent to :
----- i=n-1
\
n \ (n-i-1) 32
( seed^ + / 33^ * s[i] ) % 2^
/
----- i=0
The problem is that the last five bytes of input don't get
multiplied by sufficiently many powers of 33 to rollover 2^32.
That means that changing the last few bytes (but obviously not
the very last) of input will always change the value of the
hash by a multiple of 33. In the case of lagg_hashmbuf() with
ipv4 input, the last four bytes are the TCP or UDP port
numbers. Since the output of lagg_hashmbuf is always taken
modulo the port count, and 3 is a common port count for a lagg,
that's bad. It means that the UDP or TCP source port will
never affect which lagg member is selected on a 3-port lagg.
At 10Gbps, I was not able to measure any difference in CPU
consumption between the old and new hash.
Submitted by: asomers (original commit)
Reviewed by: emaste, glebius
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1001723 on 2013/08/28 (original)
1114258 on 2015/01/22 (edit)
Up to 7 archives of the log will be kept (just for consistency with the other
log rotation rules)
PR: 196788
MFC after: 1 week
Reviewed by: hselasky
Sponsored by: EMC / Isilon Storage Division
add two targets, 'vm-release' and 'cloudware-release',
that are invoked if WITH_VMIMAGES and WITH_CLOUDWARE
are not empty.
This fixes an issue where 'make release' would not
build the cloud provider targets because CLOUDWARE was
not yet set. [1]
Move the WITH_VMIMAGES and WITH_CLOUDWARE targets to
Makefile.vm.
Note: There is no 'cloudware-install' target yet, since
some of the disk image names may need to be specific to
the provider, so this is probably best handled by the
build scripts.
Reported by: cperciva [1]
MFC after: 1 month
X-MFC-with: r277458
Sponsored by: The FreeBSD Foundation
The last elftoolchain update is upstream rev 3136. Update our reported
version and add M (Modified) suffix as our elftoolchain contains
additional fixes not yet committed upstream.
Sponsored by: The FreeBSD Foundation
sys/netinet/ip_carp.c:
Add a "reason" string parameter to carp_set_state() and
carp_master_down_locked() allowing more specific logging
information to be passed into these apis.
Refactor existing state transition logging into a single
log call in carp_set_state().
Update all calls to carp_set_state() and
carp_master_down_locked() to pass an appropriate reason
string. For state transitions that were previously logged,
the output should be unchanged.
Submitted by: gibbs (original), asomers (updated)
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1039697 on 2014/02/11 (original)
1049992 on 2014/03/21 (updated)
FreeBSD developers need more time to review patches in the surrounding
areas like the TCP stack which are using MPSAFE callouts to restore
distribution of callouts on multiple CPUs.
Bump the __FreeBSD_version instead of reverting it.
Suggested by: kmacy, adrian, glebius and kib
Differential Revision: https://reviews.freebsd.org/D1438
very questionable, since it makes vimages more dependent on each other. But
the reason for the backout is that it screwed up shutting down the pf purge
threads, and now kernel immedially panics on pf module unload. Although module
unloading isn't an advertised feature of pf, it is very important for
development process.
I'd like to not backout r276746, since in general it is good. But since it
has introduced numerous build breakages, that later were addressed in
r276841, r276756, r276747, I need to back it out as well. Better replay it
in clean fashion from scratch.
While here, fix a bug in which NANO_PMAKE would not be appended at the
appropriate time.
Simply move both checks to after the call to set_defaults_and_export().
Tested by: lstewart
Sponsored by: Spectra Logic
The newer boards don't have the response field that indicates
whether the SCSI status byte is present. You have to just look to
see whether it is non-zero.
The code was looking to see whether the sense length was valid
before propagating the SCSI status byte (and sense information) up
the stack. With a status like Reservation Conflict, there is no
sense information, only the SCSI status byte. So it wasn't getting
correctly returned.
isp.c:
In isp_intr(), if we are on a 2400 or 2500 type board and
get a response, look at the actual contents of the
SCSI status value and set the RQSF_GOT_STATUS flag
accordingly so that return any SCSI status value we get. The
RQSF_GOT_SENSE flag will get set later on if there is
actual sense information returned.
Submitted by: ken
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1112791 on 2015/01/15
If the user sends an XPT_RESET_DEV CCB, make sure to reset the
Fibre Channel Command Reference Number if we're running on a FC
controller.
We send a SCSI Target Reset when we get this CCB, and as a result
need to reset the CRN to 1 on the next command.
isp_freebsd.c:
In the XPT_RESET_DEV implementation in isp_action(), reset
the CRN if we're on a FC controller.
Submitted by: ken
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1112787 on 2015/01/15
Fix SCSI status byte reporting on 4Gb and 8Gb Qlogic boards.
The newer boards don't have the response field that indicates
whether the SCSI status byte is present. You have to just look to
see whether it is non-zero.
The code was looking to see whether the sense length was valid
before propagating the SCSI status byte (and sense information) up
the stack. With a status like Reservation Conflict, there is no
sense information, only the SCSI status byte. So it wasn't getting
correctly returned.
isp.c:
In isp_intr(), if we are on a 2400 or 2500 type board and
get a response, look at the actual contents of the
SCSI status value and set the RQSF_GOT_STATUS flag
accordingly so that return any SCSI status value we get. The
RQSF_GOT_SENSE flag will get set later on if there is
actual sense information returned.
Submitted by: ken
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1112791 on 2015/01/15
the data the inline functions access together at the start of the bus_space
struct. The start-of part isn't so important, it's the grouping-together
that's the point: now all the most-accessed data should be in one cache line.
Suggested by: cognet
systems with more than 4GB of physical memory.
To remotely debug the system 'stealthy' which has a kernel
with this change installed and firewire properly configured:
% fwcontrol -m stealthy (or stealthy's firewire EUI64)
% kgdb kernel /dev/fwmem0.0
sys/dev/firewire/fwohci.c:
Rather than hard code the upper limit for hw based
automatic responses to remote DMA requests at 4GB,
program the hardware using Maxmem, the page number
one higher than the highest physical page detected
in the system.
While here, garbage collect more useless splfw()
calls.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110994 on 2015/01/06
asynchronous remote dma request (DMA request that the
hardware cannot automatically handle).
sys/dev/firewire/firewire.c
In fw_rcv(), add missing early return in the error
path for DMA requests to unregistered regions.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110993 on 2015/01/06
sys/boot/i386/libfirewire/firewire.c:
sys/dev/firewire/firewire.c:
Fix configuration ROM generation count wrapping logic
so that the generation count is never outside of
allowed limits (0x2 -> 0xF).
sys/dev/firewire/firewire.c:
In fw_xfer_unload(), xfer->fc may be NULL. Protect
against this before taking the fc lock.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110685 on 2015/01/05
sys/dev/firewire/firewire.c:
In fw_xfer_unload() expand lock coverage so that
the test for FWXF_INQ doesn't race with it being
cleared in another thread.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110207 on 2015/01/02
sys/dev/firewire/firewire.c:
In fw_xfer_unload(), clear the FWXF_INQ flag on the
xfer under protection of the FW_GMTX, after the
xfer is removeed from the tx/rx queue. Otherwise
it is possible for the xfer to be removed again
(corrupting the list or immediately panicing) from
another thread that has found this xfer in the
transaction label table.
Submitted by: gibbs
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 1110200 on 2015/01/02
ZFS already commits outstanding data every zfs_txg_timeout seconds, so these
syncs are unnecessarily intrusive.
Submitted by: gibbs
Sponsored by: Spectra Logic
MFSpectraBSD: 1105759 on 2014/12/11
Since allow_mounted is a FreeBSD-specific change, default to B_TRUE, then
locally check for the magic bit. Unconditionally check allow_mounted below.
Convert the setting of allow_mounted to an explicit boolean.
MFC after: 1 week
Sponsored by: Spectra Logic
MFSpectraBSD: 672578 (in part) on 2013/07/19
mostly a no-op since all currently-supported instances of these CPUs give
the number of SLB slots in the device tree, but keep it here as well just
in case.
instructions to call through pointers instead. In general, these are set
implicitly through relocation processing. One has to be set explicitly in
machdep.c, however, to fit one handler in the tiny (8 instruction) space
available.
Reviewed by: andreast
Differential revision: D1554
Tested on: UP and SMP G5, Cell, POWER5+
We obtain a stable copy and store it in local 'fde' variable. Storing another
copy (based on aforementioned variable) does not serve any purpose.
No functional changes.
The only potential in-tree consumer (_fdrop) special-cased it and returns 0
0 on its own instead of calling badfo_close.
Remove the special case since it is not needed and very unlikely to encounter
anyway.
No objections from: kib
This is primarily for developer/debugging use; it enables built-in tagged
tracking of refcounts inside ZFS. It can only be enabled from the loader,
since it modifies how in-core state is managed. Default remains disabled.
MFC after: 1 week
Sponsored by: Spectra Logic
as the cpu id on arm64 as it may use two cells. In it's place we can use
the device id.
It is expected we will use the reg data on arm64 to enable cores so we
still need to read and store it even if it is not yet used.
Differential Revision: https://reviews.freebsd.org/D1555
Reviewed by: nwhitehorn
Sponsored by: The FreeBSD Foundation
The amd64, i386, and sparc64 versions were identical, with the one
difference where the former two used inline asm instead of _tcb_get. I
have compared the function before and after replacing the asm with _tcb_get
and found the object files to be identical.
The arm, mips, and powerpc versions were almost identical. The only
difference was the powerpc version used an alignment of 1 where arm and
mips used 16. As this is an increase in alignment is will be safe.
Along with this arm, mips, and powerpc all passed, when initial was true,
the value returned from _tcb_get as the first argument to
_rtld_allocate_tls. This would then return this pointer back to the caller.
We can remove these extra calls by checking if initial is set and setting
the thread control block directly. As this is what the sparc64 code does
we can use it directly.
As after these observations all the architectures can now have identical
code we can merge them into a common file.
Differential Revision: https://reviews.freebsd.org/D1556
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
commit 4d93914ae3db4a897ead4b. Some related drm infrastructure
changes are imported as needed.
Biggest update is the rewrite of the i915 gem io to more closely
follow Linux model, althought the mechanism used by FreeBSD port is
different.
Sponsored by: The FreeBSD Foundation
MFC after: 2 month
