Add new API call: evdev_register_mtx which takes lock argument that
should be used instead of internal one for evdev locking. Useful for
cases if evdev_push_event() is always called with driver's lock taken
and reduces amount of lock aquisitions. This allows to avoid LOR
between ev_open/ev_close invocations and evdev_push_event() Such LOR
can happen when ev_open/ev_close methods acquire driver lock and
evdev_push_event() is called with this lock taken.
Submitted by: Vladimir Kondratiev <wulf@cicgroup.ru>
Don't warn about valid time zone abbreviations. POSIX
through 2000 says that an abbreviation cannot start with ':', and
cannot contain ',', '-', '+', NUL, or a digit. POSIX from 2001
on changes this rule to say that an abbreviation can contain only
'-', '+', and alphanumeric characters from the portable character
set in the current locale. To be portable to both sets of rules,
an abbreviation must therefore use only ASCII letters." Adapted
from tzcode2015f.
This is needed to be able to update tzdata to a newer version
MFC after: 3 days
Per Austin group issue #884, always set IFS to $' \t\n'. As before, IFS will
be exported iff it was in the environment.
Most shells (e.g. bash, ksh93 and mksh) already did this. This change
improves predictability, in that scripts can simply rely on the default
value.
However, the effect on security is little, since applications should not be
calling the shell with attacker-controlled environment variable names in the
first place and other security-sensitive variables such as PATH should be
and are imported by the shell.
When using a new sh with an old (before 10.2) libc wordexp(), IFS is no
longer passed on. Otherwise, wordexp() continues to pass along IFS from the
environment per its documentation.
Discussed with: pfg
Relnotes: yes
Don't call pmap_kextract() multiple times, it wastes CPU cycles, which in a high
performance environment can be very expensive.
Inline XX_FindTracker() to allow more optimizations as well.
There are a variety of more interesting RX statistics that we should
keep track of but we don't. This is a starting point for adding more
information.
Specifically:
* now the RX rate information and some of the packet status is
passed up;
* The 32 bit or 64 bit TSF is passed up;
* the PHY mode is passed up;
* the "I'm decap'ed AMSDU!" state is passed up;
* number of RX chains is bumped to 4.
This is all mostly a placeholder for getting the data into the RX status
before we pass it up to net80211 - unfortunately we don't yet enforce
that drivers provide it, nor do we pass the provided info back up the
stack so anyone can use the data.
We're going to need to use some of this data moving forward.
Notably, now that some hardware can do AMSDU decap for us (the intel iwm
driver can do it when we flip it on; the ath10k port I'm doing does
it for us) then we need to pass it up through the stack so the duplicate
RX sequence numbers and crypto/IV details don't cause the packet to
be dropped and/or counted against a replay counter.
It's also the beginning of being able to do more interesting node
accounting in net80211. Specifically, once drivers start populating
per-packet rate information, AMPDU information, timestamps, etc,
we can start providing histograms of rate-versus-RSSI, account
for receive time spent per node and other such interesting things.
(Note: I'm also hoping to include ranging and RTT information for
future chipset support; and it's likely going to include it in
this kind of fashion.)
This change extends the nd6 lock to protect the ND prefix list as well
as the list of advertising routers associated with each prefix. To handle
cases where the nd6 lock must be dropped while iterating over either the
prefix or default router lists, a generation counter is used to track
modifications to the lists. Additionally, a new mutex is used to serialize
prefix on-link/off-link transitions. This mutex must be acquired before
the nd6 lock and is held while updating the routing table in
nd6_prefix_onlink() and nd6_prefix_offlink().
Reviewed by: ae, tuexen (SCTP bits)
Tested by: Jason Wolfe <jason@llnw.com>,
Larry Rosenman <ler@lerctr.org>
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D8125
when we are exiting anyway.
Add NULL checks for all malloc and strdup returns.
Reviewed by: gnn
Approved by: sjg (mentor)
Obtained from: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D8002
This change is equivalent to the approach committed in r306417, but if
sed has a bug it could be exploited by the untrusted tar file. Instead,
generate the expected tar content and compare that with find's output.
convert the expected hash list to the expected tar content filesystem
layout, and compare that with find's output.
Submitted by: cperciva (in review D8052)
Reviewed by: oshogbo
MFC after: 2 weeks
R_AARCH64_RELATIVE relocation found on arm64. It would try to add the
contents of the memory location being relocated to the base address and
the relocation addend. This worked when the contents was zero, however
this now seems to be set to the value of the addend so we add this twice.
Fix this by just setting the memory to the computed value.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8177
that can be compiled on various OSes (including on older versions
of FreeBSD), make it possible to have it include the partitioning
scheme definitions without pulling in FreeBSD specifics.
In particular this means:
o move the scheme definitions iand related defines to header files
under sys/disk,
o make them (more) portable by using uint#_t (where applicable)
and renaming defines so that they at least have a good prefix,
o make the new headers stand-alone so that they don't need FreeBSD
definitions, like struct uuid(*)
o keep the original headers for compatibility, but rewrite them to
get the scheme definitions from <sys/disk/$scheme.h>.
(*) since UUID/GUID type definitions are non-portable and the GPT
scheme uses them, make it possible to have the scheme definitions
use an external type by allowing consumers of the header to set
GPT_UUID_TYPE. When GPT_UUID_TYPE has not been defined, the header
will use it's own type definition, which is the same as struct uuid.
The gpt_uuid_t typedef is created to abstract the details and allows
consumers to refer to a single type.
There is not conflict between the partitioning scheme headers and
what is defined in them. All headers can be included in the same
source files.
Note: consumers of the old headers have not been changed yet. Such
will be done if and when needed/beneficial.
Reviewed by: imp, jhb
MFC after: 1 month
Sponsored by: Bracket Computing
shell, ensure that we do sleep for at least the specified time, in
presence of signals.
Interrupted sleep(3) is followed by _exit(), which might cause 'Going
nowhere without my init' panic if init(8) exits before the reboot(2)
really started, or before SIGTSTP stopped init(8) (both events are
initiated by the parallel reboot(8) operation).
I do not see other calls to sleep(STALL_TIMEOUT) as having the same
disasterous consequences and kept them as is until the similar change
is proven required.
Reported and tested by: Andy Farkas <chuzzwassa@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
- Numerous crash and bug fixes
- Improved warning and error messages
- Permit multiple labels on nodes and properties
- Fix node@address references
- Add support for /delete-node/
- Consume whitespace after a node
- Read the next token before the second /memreserve/
- Fix parsing of whitespace
- Clean up /delete-node/ and add support for /delete-property/
- Handle /delete-node/ specifying a unit address
Obtained from: https://github.com/davidchisnall/dtc @df5ede4
Other uses of cache_purgevfs() do rely on the cache purge for correct
operations, when paths are invalidated without unmount.
Reported and tested by: jkim
Discussed with: mjg
Sponsored by: The FreeBSD Foundation
This should allow vn_fullpath() to work even when vfs name cache is
disabled for zfs, which is the case when zfs properties like
casesensitivity and normalization are set non-default values.
The new code should be 100% reliable for directories and "mostly"
reliable for files, that is, when hardlinks across directories are
not used.
Reported by: Frederic Chardon <chardon.frederic@gmail.com>
Reviewed by: kib (vfs contract)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8146
With a short needle (aka little) musl's memmem could read past the end
of the haystack (aka big). This was fixed in musl commit c718f9f.
Reviewed by: ed
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8137
original commit log:
=====
I had originally suspected the parsing of ctype definition files as being
the source of the ctype flag mis-definitions, but it wasn't. In the
process, I simplified the cc_list parsing so I'm committing the no-impact
improvement separately. It removes some parsing redundancies and
won't parse partial range definitions anymore.
====
Submitted by: marino
Obtained from: Dragonfly
MFC after: 1 month
This commit is from John Marino in dragonfly with the following commit log:
====
This was a CTYPE encoding error involving consecutive points of the same
ctype. It was reported by myself to Illumos over a year ago but I was
unsure if it was only happening on BSD. Given the cause, the bug is also
present on Illumos.
Basically, if consecutive points were of the exact same ctype, they would
be defined as a range regardless. For example, all of these would be
considered equivalent:
<A> ... <C>, <H> (converts to <A> .. <H>)
<A>, <B>, <H> (converts to <A> .. <H>)
<A>, <J> ... <H> (converts to <A> .. <H>)
So all the points that shouldn't have been defined got "bridged" by the
extreme points.
The effects were recently reported to FreeBSD on PR 213013. There are
countless places were the ctype flags are misdefined, so this is a major
fix that has to be MFC'd.
====
This reveals a bad change I did on the testsuite: while 0x07FF is a valid
unicode it is not used yet (reserved for future use)
PR: 213013
Submitted by: marino@
Reported by: Kurtis Rader <krader@skepticism.us>
Obtained from: Dragonfly
MFC after: 1 month
netmap_kern.h currently requires all drivers including it to include
selinfo.h.
Submitted by: mmacy@nextbsd.org
Reviewed by: gnn
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D5334
In the persist case, take the SYN and FIN flags into account when updating
the sequence space sent.
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: Juniper Networks, Netflix
Differential Revision: https://reviews.freebsd.org/D7075
Tested by: Limelight, Netflix
