- Add inttypes.h #include for PRId64 macro
- Use FreeBSD's copy of getfh(2), which doesn't include a `fh_size` parameter.
Use sizeof(fhandle_t) instead as the size of fhp is always fixed as
fhandle_t, unlike NetBSD's copy of fhp, which is void*.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Previously the driver used more low level operations like iicbus_start
and iicbus_write. The problem is that those operations are not
implemented by iicbus(4) and the calls were effectively routed to
a driver to which the bus is attached.
But not all of the controllers implement such low level operations
while all of the drivers are expected to have iicbus_transfer.
While there fix incorrect implementation of iicsmb_bwrite and iicsmb_bread.
The former should send a byte count before the actual bytes, while the
latter should first receive the byte count and then receive the bytes.
I have tested only these commands:
- quick (r/w)
- send byte
- receive byte
- read byte
- write byte
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8170
Unfortunately removing files with uchg set always succeeds with root on
FreeBSD. Unfortunately running the test as an unprivileged user isn't doable
because mounting tmpfs requires root
PR: 212861
Sponsored by: Dell EMC Isilon
with no creative content. Include "lost" changes from git:
o Use /dev/efi instead of /dev/efidev
o Remove redundant NULL checks.
Submitted by: kib@, dim@, zbb@, emaste@
Currently zfsbe ensures that subordinate filesystems are mounted at the
right mount points.
The script assumes that the subordinate filesystems of a boot environment
have their canmount property set to noauto, so that they are not
automatically mounted on boot. Whereas the root filesystem is mounted
by the kernel, there was nothing to mount its subordinates.
rc.d/zfsbe fills that gap.
Discussed with: allanjude, will
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D7797
The runtime kernel loader, linker_load_file, unloads kernel files that
failed to load all of their modules. For consistency, treat preloaded
(loader.conf loaded) kernel files in the same way.
Reviewed by: kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8200
because they can use sysrc in conjunction with ssh and xargs to perform
en-masse changes in a large distribution with lots of jails spread over
many hosts on a LAN/WAN.
Provide a mechanism for disabling the warning eschewed by /etc/rc.d/jail
in said situation. If jail_confwarn="NO" is in rc.conf(5) (default "YES")
skip the warning that per-jail configurations are obsolete and that the
user should migrate to jail.conf(5).
Reviewed by: jelischer
MFC after: 3 days
Sponsored by: FIS Global, Inc.
Differential Revision: https://reviews.freebsd.org/D7465
to ieee80211_add_rx_params() + drop last (ieee80211_rx_stats) parameter
Note: there is an additional check for ieee80211_get_rx_params()
return value (which does not exist in the original diff).
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D8207
- If check for net,ethernet/usb,device compatible node fails, try to find
.../usb/hub/ethernet, where ... is bus path that can depend on actual HW.
net,ethernet/usb,device compatibity strings are FreeBSD custom invention
that is used only in RPi DTBs and since there is no other way to tie USB
device to FDT node we just do our best effort here to work with upstream
device tree
- Use -1 value to indicate invalid phandle_t, 0 is valid phandle value and
shouldn't be used as error signal
the TCP_RFC7413 kernel option. This change removes those few instructions
from the packet processing path.
While not strictly necessary, for the sake of consistency, I applied the
new IS_FASTOPEN macro to all places in the packet processing path that
used the (t_flags & TF_FASTOPEN) check.
Reviewed by: hiren
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D8219
As of r302092, pipe is a wrapper around pipe2 and the pipe syscall is no
longer used. It is included only with the COMPAT_FREEBSD10 kernel option.
Add the compat option to support upgrades from systems with an earlier
userland.
MFC after: 1 week
Keep resource state consistent with INTRNG state - if intr_activate_irq
fails - deactivate resource and propagate error to calling function
Reviewed by: mmel
It may not be available in certain cross build cases.
Note that this is a slight change in functionality, in that now only the
first line of the source ChangeLog file is processed. This is acceptable
as groff will be retired and we won't encounter a possibly-different
ChangeLog format.
Reported by: jhibbits
Tested by: jhibbits
we don't have it when MK_SSP==no.
This fixes compilation on MIPS.
Reviewed by: imp
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D8212
libzfs_core provides a rather limited but committed (stable) interface
for working with ZFS. We install libzfs_core shared library but we do
not install header files required for developing programs that use
the library. This change is to install the required header files
libzfs_core.h, libnvpair.h and sys/nvpair.h.
The headers are installed into the same locations as on illumos.
Reviewed by: mav, markj
Differential Revision: https://reviews.freebsd.org/D8005
This will allow to add slave drivers in the same fashion as for iicbus.
Also, allow other code to add a child device and set its 'addr' ivar.
The ivar can only be set if it's unset, it can not be changed.
That could be used, for example, by a platform driver that has
a precise description of the hardware and, thus, knows what drivers
can handle what slaves.
The slave auto-probing code is unsafe and broken because it uses
7-bit slave addresses. It's going to be removed.
Note: internally the driver uses address of zero as an unset address
while smbus_get_addr() returns it as -1 for compatibility reasons.
The address is expected to be unset only for children that do not
work with slaves like, for example, smb(4).
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D8173
This should have been committed in r307093: resource allocation depends
on source of the device tree. upstream dts has extra interrupt that we can
ignore
If pass order is not specified devices are attached in the order they are
defined in dts. Some interrupt consumers may be defined before intc. Also
make sure intc interrupt-parent local_intc is attached before intc itself.
TCPCB, it checks (so->so_options & SO_ACCEPTCONN) to determine whether or
not the socket is a listening socket. However, this causes the code to
access a different cacheline. If we first check if the socket is in the
LISTEN state, we can avoid accessing so->so_options when processing packets
received for ESTABLISHED sessions.
If INVARIANTS is defined, the code still needs to access both variables to
check that so->so_options is consistent with the state.
Reviewed by: gallatin
MFC after: 1 week
Sponsored by: Netflix
to add actions that run when a TCP frame is sent or received on a TCP
session in the ESTABLISHED state. In the base tree, this functionality is
only used for the h_ertt module, which is used by the cc_cdg, cc_chd, cc_hd,
and cc_vegas congestion control modules.
Presently, we incur overhead to check for hooks each time a TCP frame is
sent or received on an ESTABLISHED TCP session.
This change adds a new compile-time option (TCP_HHOOK) to determine whether
to include the hhook(9) framework for TCP. To retain backwards
compatibility, I added the TCP_HHOOK option to every configuration file that
already defined "options INET". (Therefore, this patch introduces no
functional change. In order to see a functional difference, you need to
compile a custom kernel without the TCP_HHOOK option.) This change will
allow users to easily exclude this functionality from their kernel, should
they wish to do so.
Note that any users who use a custom kernel configuration and use one of the
congestion control modules listed above will need to add the TCP_HHOOK
option to their kernel configuration.
Reviewed by: rrs, lstewart, hiren (previous version), sjg (makefiles only)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D8185
So that everyone in this task have consistent view of link state.
Reviewed by: ae
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8214
Refactor make suffix rules into separate files (one for POSIX and one not),
and rationalise the rules so that bsd.lib.mk can contain only those rules
that are library-specific (.c.po and .c.pico).
This can be accomplished by adding ${STATIC_CFLAGS} to the .c.o rule
unconditionally. STATIC_CFLAGS are only defined for use by sys.mk rules in
lib/libpam/Makefile.inc (see r227797), so it should be safe to include
them unconditionally in sys.mk's .c.o rule (tested by make universe and a
ports exp-run).
Reviewed by: bdrewery, sjg
Approved by: rwatson (mentor)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D6805
line interface to the Linux program, as well as adding a number of
useful features to make using it in shell scripts easier (since we
don't have a filesystem to fall back on interacting with).
Differential Revision: https://reviews.freebsd.org/D8128
Reviewed by: kib@, wblock@, Ganael Laplanche
the same API as the GPL'd version of this library. It implements the common
Linux API for programatically manipulating UEFI environment varibales using
the UEFI Runtime Services the kernel provides. It replaces the old efi
library since it is programmed to a different interface, but retails the
CHAR16 to UTF-8 and vice versa conversion routines. The new name is to match
Linux program's expectations.
Differential Revision: https://reviews.freebsd.org/D8128
Reviewed by: kib@, wblock@, Ganael Laplanche
