This option is intended to aid development, to allow building with user malloc.
The use case would be to build userboot & test with libc (or other) malloc and
use extra malloc debug features.
line and auth_level's redefinitions are just extraneous
telnetd will #define extern and then include ext.h to allocate storage for
all of these extern'd vars; however, two of them are actually defined in
libtelnet instead. Instead of doing an #ifdef extern dance around those
function pointers, just add an EXTERN macro to make it easier to
differentiate by sight which ones will get allocated in globals.c and which
ones are defined elsewhere.
MFC after: 3 days
Most of these were already properly declared and defined elsewhere, this is
effectively just a minor cleanup that fixes the -fno-common build.
-fno-common will become the default in GCC10/LLVM11.
MFC after: 3 days
el is declared extern in myhistedit.h and defined in histedit.c. Remove the
duplicate definition in input.c to appease the -fno-common build.
-fno-common will become the default in GCC10/LLVM11.
MFC after: 3 days
If hdaa is used in polling mode, it logs each change to the poll
interval under bootverbose, which makes it unusable (slow). These
messages are arguably useless or are a debugging leftovers at best.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Move this handful of definitions into main.c, properly declare these as
extern in config.h. This fixes the config(8) build with -fno-common.
Unexplained in my previous commit to gas, -fno-common will become the
default in GCC10 and LLVM11, so it's worth addressing these in advance.
MFC after: 3 days
Compiling with -fno-common complains as this header's included in multiple
compilation units. In fact, the proper definition of dwarf2_loc_mark_labels
already exists in dwarf2dbg.c, so simply mark this declaration with extern.
These manpages were meant to be templated once per `configure` run.
Given that we're not bound by as many constants, e.g., `--prefix` isn't
generally changing for kyua in the base system, having to generate the
manpages each build seems slightly less than optimal.
In the event that one's build environment doesn't define `$SH`, the build
will also fail until this change is introduced.
Instead of jumping through hoops dealing with shells or permissions, let's
just cut to the chase and check the generated copies into the sourcebase
under usr.bin/kyua .
MFC with: r359260
Reported by: Julian Stacey <jhs@berklix.com>
We need to build kyua libraries for kyua. Because we set MK_TESTS=no,
we can't not set MK_TESTS_SUPPORT=${MK_TESTS_SUPPORT} because the latter
defaults MK_TESTS_SUPPORT to no.
This fixes WITHOUT_TESTS + WITH_TESTS_SUPPORT builds.
Reported by: Ruslan Garipov
Reviewed by: emaste
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24206
- The linked list of cryptoini structures used in session
initialization is replaced with a new flat structure: struct
crypto_session_params. This session includes a new mode to define
how the other fields should be interpreted. Available modes
include:
- COMPRESS (for compression/decompression)
- CIPHER (for simply encryption/decryption)
- DIGEST (computing and verifying digests)
- AEAD (combined auth and encryption such as AES-GCM and AES-CCM)
- ETA (combined auth and encryption using encrypt-then-authenticate)
Additional modes could be added in the future (e.g. if we wanted to
support TLS MtE for AES-CBC in the kernel we could add a new mode
for that. TLS modes might also affect how AAD is interpreted, etc.)
The flat structure also includes the key lengths and algorithms as
before. However, code doesn't have to walk the linked list and
switch on the algorithm to determine which key is the auth key vs
encryption key. The 'csp_auth_*' fields are always used for auth
keys and settings and 'csp_cipher_*' for cipher. (Compression
algorithms are stored in csp_cipher_alg.)
- Drivers no longer register a list of supported algorithms. This
doesn't quite work when you factor in modes (e.g. a driver might
support both AES-CBC and SHA2-256-HMAC separately but not combined
for ETA). Instead, a new 'crypto_probesession' method has been
added to the kobj interface for symmteric crypto drivers. This
method returns a negative value on success (similar to how
device_probe works) and the crypto framework uses this value to pick
the "best" driver. There are three constants for hardware
(e.g. ccr), accelerated software (e.g. aesni), and plain software
(cryptosoft) that give preference in that order. One effect of this
is that if you request only hardware when creating a new session,
you will no longer get a session using accelerated software.
Another effect is that the default setting to disallow software
crypto via /dev/crypto now disables accelerated software.
Once a driver is chosen, 'crypto_newsession' is invoked as before.
- Crypto operations are now solely described by the flat 'cryptop'
structure. The linked list of descriptors has been removed.
A separate enum has been added to describe the type of data buffer
in use instead of using CRYPTO_F_* flags to make it easier to add
more types in the future if needed (e.g. wired userspace buffers for
zero-copy). It will also make it easier to re-introduce separate
input and output buffers (in-kernel TLS would benefit from this).
Try to make the flags related to IV handling less insane:
- CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv'
member of the operation structure. If this flag is not set, the
IV is stored in the data buffer at the 'crp_iv_start' offset.
- CRYPTO_F_IV_GENERATE means that a random IV should be generated
and stored into the data buffer. This cannot be used with
CRYPTO_F_IV_SEPARATE.
If a consumer wants to deal with explicit vs implicit IVs, etc. it
can always generate the IV however it needs and store partial IVs in
the buffer and the full IV/nonce in crp_iv and set
CRYPTO_F_IV_SEPARATE.
The layout of the buffer is now described via fields in cryptop.
crp_aad_start and crp_aad_length define the boundaries of any AAD.
Previously with GCM and CCM you defined an auth crd with this range,
but for ETA your auth crd had to span both the AAD and plaintext
(and they had to be adjacent).
crp_payload_start and crp_payload_length define the boundaries of
the plaintext/ciphertext. Modes that only do a single operation
(COMPRESS, CIPHER, DIGEST) should only use this region and leave the
AAD region empty.
If a digest is present (or should be generated), it's starting
location is marked by crp_digest_start.
Instead of using the CRD_F_ENCRYPT flag to determine the direction
of the operation, cryptop now includes an 'op' field defining the
operation to perform. For digests I've added a new VERIFY digest
mode which assumes a digest is present in the input and fails the
request with EBADMSG if it doesn't match the internally-computed
digest. GCM and CCM already assumed this, and the new AEAD mode
requires this for decryption. The new ETA mode now also requires
this for decryption, so IPsec and GELI no longer do their own
authentication verification. Simple DIGEST operations can also do
this, though there are no in-tree consumers.
To eventually support some refcounting to close races, the session
cookie is now passed to crypto_getop() and clients should no longer
set crp_sesssion directly.
- Assymteric crypto operation structures should be allocated via
crypto_getkreq() and freed via crypto_freekreq(). This permits the
crypto layer to track open asym requests and close races with a
driver trying to unregister while asym requests are in flight.
- crypto_copyback, crypto_copydata, crypto_apply, and
crypto_contiguous_subsegment now accept the 'crp' object as the
first parameter instead of individual members. This makes it easier
to deal with different buffer types in the future as well as
separate input and output buffers. It's also simpler for driver
writers to use.
- bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer.
This understands the various types of buffers so that drivers that
use DMA do not have to be aware of different buffer types.
- Helper routines now exist to build an auth context for HMAC IPAD
and OPAD. This reduces some duplicated work among drivers.
- Key buffers are now treated as const throughout the framework and in
device drivers. However, session key buffers provided when a session
is created are expected to remain alive for the duration of the
session.
- GCM and CCM sessions now only specify a cipher algorithm and a cipher
key. The redundant auth information is not needed or used.
- For cryptosoft, split up the code a bit such that the 'process'
callback now invokes a function pointer in the session. This
function pointer is set based on the mode (in effect) though it
simplifies a few edge cases that would otherwise be in the switch in
'process'.
It does split up GCM vs CCM which I think is more readable even if there
is some duplication.
- I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC
as an auth algorithm and updated cryptocheck to work with it.
- Combined cipher and auth sessions via /dev/crypto now always use ETA
mode. The COP_F_CIPHER_FIRST flag is now a no-op that is ignored.
This was actually documented as being true in crypto(4) before, but
the code had not implemented this before I added the CIPHER_FIRST
flag.
- I have not yet updated /dev/crypto to be aware of explicit modes for
sessions. I will probably do that at some point in the future as well
as teach it about IV/nonce and tag lengths for AEAD so we can support
all of the NIST KAT tests for GCM and CCM.
- I've split up the exising crypto.9 manpage into several pages
of which many are written from scratch.
- I have converted all drivers and consumers in the tree and verified
that they compile, but I have not tested all of them. I have tested
the following drivers:
- cryptosoft
- aesni (AES only)
- blake2
- ccr
and the following consumers:
- cryptodev
- IPsec
- ktls_ocf
- GELI (lightly)
I have not tested the following:
- ccp
- aesni with sha
- hifn
- kgssapi_krb5
- ubsec
- padlock
- safe
- armv8_crypto (aarch64)
- glxsb (i386)
- sec (ppc)
- cesa (armv7)
- cryptocteon (mips64)
- nlmsec (mips64)
Discussed with: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D23677
No user (except nobody) should be a member of the nobody group.
Reported by: rgrimes
Reviewed by: rgrimes
MFC after: 3 days
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24199
The SQHD field of a Completion Queue entry indicates the current
Submission Queue head pointer value. The head pointer represents the
next entry to be consumed and is updated after consuming the current
entry.
In the Admin queue processing, the current code updates the head pointer
after reporting the value to the host via the SQHD. This gives the
impression that the Controller is perpetually one command behind in its
processing of the Admin SQ. And while this doesn't appear to bother some
initiators, it is wrong.
Fix is to update the SQ head pointer prior to writing the SQHD value in
the completion.
While here, fix missed update of dword 0 (cdw0) in the completion
message.
Reported by: khng300
Reviewed by: jhb, imp
Approved by: jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24083
The bhyve NVMe emulation has a race in the logic which generates command
completion interrupts. On FreeBSD guests, this manifests as kernel log
messages similar to:
nvme0: Missing interrupt
The NVMe emulation code sets a per-submission queue "busy" flag while
processing the submission queue, and only generates an interrupt when
the submission queue is not busy.
Aside from being counter to the NVMe design (i.e. interrupt properties
are tied to the completion queue) and adding complexity (e.g. exceptions
to not generating an interrupt when "busy"), it causes a race condition
under the following conditions:
- guest OS has no outstanding interrupts
- guest OS submits a single NVMe IO command
- bhyve emulation processes the SQ and sets the "busy" flag
- bhyve emulation submits the asynchronous IO to the backing storage
- IO request to the backing storage completes before the SQ processing
loop exits and doesn't generate an interrupt because the SQ is "busy"
- bhyve emulation finishes processing the SQ and clears the "busy" flag
Fix is to remove the "busy" flag and generate an interrupt when the CQ
head and tail pointers do not match.
Reported by: khng300
Reviewed by: jhb, imp
Approved by: jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24082
This adds support for the Dataset Management (DSM) command to the NVMe
emulation in general, and more specifically, for the deallocate
attribute (a.k.a. trim in the ATA protocol). If the backing storage for
the namespace supports delete (i.e. deallocate), setting the deallocate
attribute in a DSM will trim/delete the requested LBA ranges in the
underlying storage.
Reviewed by: jhb, araujo, imp
Approved by: jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21839
Pass the struct pci_nvme_blockstore pointer for this namespace to the
namespace initialization function instead of only the desired eui64
value.
Minor functional change in that the code updates the eui64 value in the
blockstore.
Reviewed by: jhb, araujo
Approved by: jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21838
Add a "copy direction" parameter to nvme_prp_memcpy such that data can
be copied to the memory specified by the PRP entries (current behavior)
or copied from the PRP entries (new behavior). The upcoming deallocate
functionality will use the copy from capability.
Reviewed by: jhb, araujo
Approved by: jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21837
- make sure volume controls are correctly mapped to "pcm" and "rec" depending
on how they deliver audio to the USB host.
- make sure there are no duplicate record selections.
- remove internal only mixer class type.
- don't add software volume controls for recording only.
- some minor mixer code cleanup.
Tested by: Horse Ma <Shichun.Ma@dell.com>
MFC after: 1 week
Sponsored by: Mellanox Technologies
Now that LLD 10 is out, and required patches have landed, we are now ready
to finally switch away from the ancient in-tree ld.bfd.
Special thanks to Fangrui Song for many hours of work on getting the
32-bit powerpc lld ready for prime-time.
Reviewed by: emaste (earlier revision), jhibbits
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D24111
The "for" loop on big endian was inverting all the bits instead of
just the words
Issue reported by TestSuite (msun lib nan_test case)
Submitted by: Renato Riolino <renato.riolino@eldorado.org.br>
Submitted by: Fernando Valle <fernando.valle@eldorado.org.br>
Reviewed by: pfg, alfredo
Approved by: jhibbits (mentor)
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23926
The "kyua about" command assumes these files exist causing tests
supplied devel/kyua to fail.
Fix a bug defining the default KYUA_DOCDIR so the installed files can be
found.
Reported by: jenkins tests
Reviewed by: lwhsu
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24187
[PowerPC]: Don't allow r0 as a target for LD_GOT_TPREL_L/32
Summary:
The linker is free to relax this (relocation R_PPC_GOT_TPREL16)
against R_PPC_TLS, if it sees fit (initial exec to local exec). If r0
is used, this can generate execution-invalid code (converts to 'addi
%rX, %r0, FOO, which translates in PPC-lingo to li %rX, FOO). Forbid
this instead.
This fixes static binaries using locales on FreeBSD/powerpc (tested
on FreeBSD/powerpcspe).
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D76662
Requested by: jhibbits
MFC after: 6 weeks
X-MFC-With: 358851
