During the build it is only used by share/ctypedef and share/colldef
which will not be built if ${MK_LOCALE} == "no". This saves a tiny bit
of time when building without locales.
Approved By: jhb (mentor)
When building on non-FreeBSD systems we need to pass an explicit target
triple to clang otherwise it will attempt to build with the host triple.
This also has advantages when building on a FreeBSD host: we now tell
clang that we are targeting at least FreeBSD 12.0 instead of an older
version so it can enable newer features.
Reviewed By: brooks (mentor)
Approved By: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D16842
In order to build on a Linux host we need to bootstrap md5 since the Linux
md5sum command produces output in a different format.
Reviewed By: emaste
Approved By: brooks (mentor)
Differential Revision: https://reviews.freebsd.org/D16846
Otherwise this step will fail on a Linux host due to missing "wheel" group
Approved By: brooks (mentor)
Differential Revision: https://reviews.freebsd.org/D16841
Generally straightforward enough; a copy of argv[1] was being made in
command_fdt_internal, solely used for a comparison within the
handler-search, then promptly leaked.
Reported by: ports gcc and clang's static analyzer
SDHCI_TRNS_ACMD12 is to be set only for multiple-block read/write
commands without data length information, so don't unconditionally
set this bit. The result matches what e. g. Linux does.
- Section 2.2.19 of the SDHCI specification version 4.20 states that
SDHCI_ACMD12_ERR should be only valid if SDHCI_INT_ACMD12ERR is set
and hardware may clear SDHCI_ACMD12_ERR when SDHCI_INT_ACMD12ERR is
cleared (differing silicon behavior is specifically allowed, though).
Thus, read SDHCI_ACMD12_ERR before clearing SDHCI_INT_ACMD12ERR.
While at it, use the 16-bit accessor rather than the 32-bit one for
reading the 16-bit SDHCI_ACMD12_ERR.
- SDHCI_INT_TUNEERR isn't one of the ROC bits in SDHCI_INT_STATUS so
clear it explicitly.
- Add missing prototypes and sort them.
While loader.conf(5) suggests that all values should be quoted, reality is
that this was never strictly enforced and it is used. We already make some
concession to this in number values, which aren't strictly quoted either.
The compromise here is that multi-word values must be quoted. This lets
things like `foo_load=YES` work, while denying more complex expressions on
the right hand side. This likely catches the vast majority of current usage.
A bit of a kludge is needed to accomplish this since Lua regex doesn't
support branching. I had considered splitting up expressions and generating
the right-hand side of the expressions completely in config.parse, but
deemed this too large of an overhaul to take given the current timing. This
should be re-worked shortly after the thaw.
Reported by: royger
netascii is obsolete and inefficient. It isn't even supported by many
clients. Better to use binary mode by default.
Reviewed by: cem
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16869
Migrate udp6_send() v4mapped code to udp6_output() saving us a re-lock and
further simplifying the address-family handling code by eliminating
AF_INET checks and almost all v4mapped handling right after the start
as cases could actually not happen anymore.
Rework output path locking similar to UDP4 allowing for better
parallelism (see r222488, and later versions).
Sponsored by: The FreeBSD Foundation (2012)
Sponsored by: iXsystems (2012)
Differential Revision: https://reviews.freebsd.org/D3721
netfront_backend_changed() is called from the xenwatch_thread(), which means
that the curvnet is not set. We have to set it before we can call things like
arp_ifinit().
PR: 230845
lualoader was not respecting the 'xen_kernel' environment variable, which
hints to the interpreter that it should load a Xen kernel prior to loading
any other kernel that might be specified. If a Xen kernel is specified and
we fail to load it, we should not proceed to boot.
Reported by: royger
Tested by: royger
higher bandwidth interfaces. The new value is used above 2.5 Gbps,
which is the highest standard rate that could be used prior to
r338209, so the default behavior for all existing systems should
remain the same.
The value of 128 chosen is a balance between being big enough to
reduce potential precision/quantization effects stemming from frequent
bucket refills over small time intervals and being small enough to
prevent a greedy driver from burst dequeuing more packets than it has
available hardware ring slots for whenever altq transitions from idle
to backlogged.
Reviewed by: jmallett, kp
MFC after: 2 weeks
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D16852
The current kernel ifunc implementation creates a PLT entry for each
ifunc definition. ifunc calls therefore consist of a call to the
PLT entry followed by an indirect jump. The jump target is written
during boot when the kernel linker resolves R_[*]_IRELATIVE relocations.
This implementation is defined by requirements for userland code, where
text relocations are avoided. This requirement is not present for the
kernel, so the implementation has avoidable overhead (namely, an extra
indirect jump per call).
Address this for now by adding a special option to the static linker
to inhibit PLT creation for ifuncs. Instead, relocations to ifunc call
sites are passed through to the output file, so the kernel linker can
enumerate such call sites and apply PC-relative relocations directly
to the text section. Thus the overhead of an ifunc call becomes exactly
the same as that of an ordinary function call. This option is only for
use by the kernel and will not work for regular programs.
The final form of this optimization is up for debate; for now, this
change is simple and static enough to be acceptable as an interim
solution.
Reviewed by: emaste
Discussed with: arichardson, dim
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16748
manu found in the noted PR that overlays seemed to be clobbering the kenv
and killing the boot. Further inspection revealed that one can `fdt ls` at
the loader prompt for a successful boot, but autoboot breaks it.
In the autoboot case, first setup of FDT is happening in the middle of
bi_load, which triggers loading of the DTBO from /boot.
This is bad, bad, bad. Files in the loader are loaded somewhere in the
middle of the address space one after another. bi_load starts building the
needed kernel bootinfo immediately after the highest-addr loaded file. File
loads in the middle of bi_load suddenly clobber bootinfo and everything goes
off the rails.
The solution to this is to use take advantage of arch_autoload to setup FDT
in efiloader compiled with LOADER_FDT_SUPPORT. This matches how it works in
ubldr land, and is how it should have worked when overlay support was added
to efiloader since fdt_setup_fdtp now has the potential to load files
(courtesy of fdt_platform_load_dtb).
PR: 230804
Discussed with: imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16858
- Most of the boards are using U-Boot, u-boot embed a DTB that isn't
compiled with -@ (overlay ready) so we cannot use overlays. We want
overlays, overlays are nice.
- The DTS life is going to linux, then sometimes it's imported in
U-Boot but it depend on the SoC family, U-Boot doesn't batch import
every DTS like we do. So sometimes to U-Boot DTS are very old. Or when
an interesting patch in commited upstream it is in Linux X+2 (roughly 4
months from now), we then have to wait for U-Boot to catch up, that
give us between 4 and 6 months to have an update.
- Some boards like the Marvell ones have 3 DTS, the one in the
vendor U-Boot made by Marvell themselves, the one in u-boot mainline
and the one in Linux. I found that the DTS in the Marvell U-Boot have
some problem with FreeBSD (especially the macchiatobin that declare
node with the same address but not the same size, that is not something
that the rman code can handle, it could be modified, I don't know the
code well enough). Also some compatible are used when they shouldn't,
for example they declare the gpio being orion-gpio while this binding
requires interrupts supports, which the node doesn't have.
- The above situation is mostly the same with RockChip SoCs (possibly
others, those are the only SoCs I work on that have this problem).
Note that importing the DTS doesn't mean that every board will use
them, I don't intend to copy the DTB to the GENERIC memstick image for
the Overdrive 1000/3000 for example, the ones provided by the firmware
works fine.
RPI3 will still stay an exception as we use the DTB provided by the
rpi-firmware package, so they come from the rpi foundation linux fork.
* Constify rtpref_str declaration
* Remove unused h_errno declaration
* Use time_t type for expire
* Use strlcpy to set static "?" value to ifname
* Rename local variable 's' to stop shadowing global definition
* Close socket used in pfx_flush()
* Use local variables for sock() in setdefif() and getdefif()
* Increase WARNS to 3
Reviewed by: allanjude, kevans
Approved by: allanjude
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D11118
use sizeof() or explicit #definesi instead. No functional change.
This was suggested by jmg@.
MFC after: 1 month
XMFC with: r338053
Sponsored by: Netflix, Inc.
devmatch_blacklist is a space separated list of modules (w/o the .ko
or full path) to exclude from devmatch's processing.
Differential Revision: https://reviews.freebsd.org/D16735
up the device described by the nomatch event in the device tree. If we
find it, then if the device is marked as have already attached to a
device once, then ignore the device.
This keeps us from reloading the device driver when it has just been
manually unloaded. All devies that have had a driver attach to them at
least once no longer participate in pnp-based autoloading.
Differential Revision: https://reviews.freebsd.org/D16735
This flag is set once the device has been successfully attached. When
set, it inhibits devmatch from trying to match the device. This in
turn allows kldunload to work as expected. Prior to the change, the
driver would immediately reload because devmatch had no notion that
the driver had once been attached, and therefore shouldn't participate
in further matching.
Differential Revision: https://reviews.freebsd.org/D16735
This backs out the hack we added in r329458. Now that we can freeze /
thaw probing, this is a much better solution to that problem. Revert
to simply printing the results as we find them, and relying on an
external sort | uniq to clean up the list.
Differential Revision: https://reviews.freebsd.org/D16735
Use devctl freeze / thaw to allow us to laod multiple modules before
doing the probe/attach so they all get a bite at the apple.
Differential Revision: https://reviews.freebsd.org/D16735
This adds it to devctl, libdevctl, defines the two IOCTLs and
implements the kernel bits. causes any new drivers that are added via
kldload to be deferred until a 'thaw' comes in. These do not stack: it
is an error to freeze while frozen, or thaw while thawed.
Differential Revision: https://reviews.freebsd.org/D16735
Fixes courtesy of arichardson and jmg:
- HACKING was pointing to the wrong place
- Added headers were being relied on implicitly, but libstdc++ did not
comply with the unspoken wishes of dtc.
MFC after: 1 week
- Some overly-long lines
- Consistently using .Brq ({})
- Consistently using .Cm
- Not using .Ao/.Ac around .Ar
PR: 230576
Submitted by: Yuri Pankov (with a fair amount of rebasing pre-commit)
Add a -U flag to get back the old behavior. The new behavior is a little
more friendly to the common use cases, jail the BE and execute a script.
Having the jail torn down automatically when the script is finished, or when
you exit the shell, is a little more friendly than having to remember to
`bectl ujail`.
Batch mode (-b) will continue to leave the jail up, as it's assumed the
caller has other intentions.
Submitted by: Shawn Webb (partially)
No functional change.
When attempting to document the changed argument types in devstat.9, I
discovered the 20 year old manual page severely mismatched reality even
prior to my simple change. So I took a first cut pass cleaning that up to
match reality. I'm sure I've missed some things; the goal was just to leave
it better than when I started.
Sponsored by: Dell EMC Isilon
As indicated by the comment, any fixups applied (which might include
overlays) can invalidate the previously located node by adding nodes or
setting/adding properties. The later fdt_setprop of fixup-applied property
would then fail because of the bad/wrong node offset.
This would have generally been harmless, but potentially caused multiple
applications of fixups and caused a little bit of bloat.
MFC after: 1 week
Transferring files in netascii format requires, among other things,
translating all CR characters to a CR,NUL pair. tftpd does this correctly
except when the CR occurs as the last octet of a packet. In that case, it
erroneously drops the NUL which should be part of the following packet. The
bug was caused by using 0 as a sentinel value in a variable that could
legitimately hold 0. Fix it by switching the sentinel value to -1.
PR: 178055
Reported by: Richard <rsitze@gmail.com>
Reviewed by: cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16853
Due to hardware limitation AMD I2C controller can't trigger pending
interrupt if interrupt status has been changed after clearing
interrupt status bits. So, I2C will lose the interrupt and IO will be
timed out. Implements a workaround to disable I2C controller interrupt
and re-enable I2C interrupt before existing interrupt handler.
Submitted by: rajfbsd@gmail.com
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16720
Add an option, KASSERT_PANIC_OPTIONAL, that allows runtime KASSERT()
behavior changes. When this option is not enabled, code that allows
KASSERTs to become optional is not enabled, and all violated assertions
cause termination.
The runtime KASSERT behavior was added in r243980.
One important distinction here is that panic has __dead2
("attribute((noreturn))"), while kassert_panic does not. Static analyzers
like Coverity understand __dead2. Without it, KASSERTs go misunderstood,
resulting in many false positives that result from violation of program
invariants.
Reviewed by: jhb, jtl, np, vangyzen
Relnotes: yes
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16835
SCTP. They are based on what is specified in the Solaris DTrace manual
for Solaris 11.4.
Reviewed by: 0mp, dteske, markj
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D16839
This is pkgbase related as it switches to CONFS to properly tag this as a
config file.
Approved by: will (mentor)
Differential Revision: https://reviews.freebsd.org/D16848
The boot-time ifunc resolver assumes that it only needs to apply
IRELATIVE relocations to PLT entries. With an upcoming optimization,
this assumption no longer holds, so add the support required to handle
PC-relative relocations targeting GNU_IFUNC symbols.
- Provide a custom symbol lookup routine that can be used in early boot.
The default lookup routine uses kobj, which is not functional at that
point.
- Apply all existing relocations during boot rather than filtering
IRELATIVE relocations.
- Ensure that we continue to apply ifunc relocations in a second pass
when loading a kernel module.
Reviewed by: kib
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16749
