A number of entries of the form "de.kbd.from-cp850" existed in vt's
INDEX.keymaps, added in r270114, but these files do not exist.
I removed them in r355585 but accidentally re-added them in r355592.
Remove them yet again.
PR: 235564, 235853
MFC after: 1 week
Also sort some entries into the correct location, correct MacBook
capitalization, etc.
PR: 235853
MFC after: 1 week
Submitted by: scootergrisen gmail com
These were the only values in the range from 0 to 0x1f that were defined
as hex values, all other occurances have been converted before.
MFC after: 1 week
This is both reasonable and a common GNUism that a lot of ported software
expects.
Universally process \r, \n, and \t into carriage return, newline, and tab
respectively. Newline still doesn't function in contexts where it can't
(e.g. BRE), but we process it anyways rather than passing
UB \n (escaped ordinary) through to the underlying regex engine.
Adding a --posix flag to disable these was considered, but sed.1 already
declares this version of sed a super-set of POSIX specification and this
behavior is the most likely expected when one attempts to use one of these
escape sequences in pattern space.
This differs from pre-r197362 behavior in that we now honor the three
arguably most common escape sequences used with sed(1) and we do so outside
of character classes, too.
Other escape sequences, like \s and \S, will come later when GNU extensions
are added to libregex; sed will likely link against libregex by default,
since the GNU extensions tend to be fairly un-intrusive.
PR: 229925
Reviewed by: bapt, emaste, pfg
Differential Revision: https://reviews.freebsd.org/D22750
migitation is available in microcode and the operator has set
the sysctl to automatic mode.
Reported by: Coverity
CID: 1408334
MFC after: 3 days
Sponsored by: Intel
This decouples MK_LLVM_TARGET_ALL from MK_CLANG. It is fine if
LLVM_TARGET_* are set even if MK_CLANG is disabled. It never
made sense to depend MK_LLVM_TARGET_* to MK_CLANG (which I did
in r335706).
PR: 240507
Reported by: kevans, swills
MFC after: 2 weeks
vm_swapout_object_deactivate_pages() is renamed to
vm_swapout_object_deactivate(), and the loop body is moved into the new
vm_swapout_object_deactivate_page(). This makes the code a bit easier
to follow and is in preparation for some functional changes.
Reviewed by: jeff, kib
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D22651
This is a 32-bit structure embedded in each vm_page, consisting mostly
of page queue state. The use of a structure makes it easy to store a
snapshot of a page's queue state in a stack variable and use cmpset
loops to update that state without requiring the page lock.
This change merely adds the structure and updates references to atomic
state fields. No functional change intended.
Reviewed by: alc, jeff, kib
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D22650
A number of entries of the form "de.kbd.from-cp850" existed in vt's
INDEX.keymaps, added in r270114, but these files do not exist.
PR: 235564
Submitted by: scootergrisen gmail com
MFC after: 1 week
The checks literally repeat conditions that make ufs_inactive() to
take some actions.
Reviewed by: jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D22616
PULLUP_LEN_LOCKED().
PULLUP_LEN_LOCKED() could update mbuf and thus we need to update related
pointers that can be used in next opcodes.
Reported by: Maxime Villard <max at m00nbsd net>
MFC after: 1 week
TX_PKTS2 is more efficient within the firmware and this improves netmap
Tx by a few Mpps in some common scenarios.
MFC after: 1 week
Sponsored by: Chelsio Communications
These were obtained from the Chelsio Unified Wire v3.12.0.1 beta
release.
Note that the firmwares are not uuencoded any more.
MFH: 1 month
Sponsored by: Chelsio Communications
The datasheets for these chips claim the maximum is 921,600, but testing
shows these two higher rates also work (but no rates above 921,600 other
than these two work; these represent dividing the base buad clock by 3 and 2
respectively).
As we do for many other laptops, put the headphone jack and speakers in
the same association by default so that the generic sound device
automatically switches between them.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Summary:
In rS338751, the check to declare `timespec_get()` for C++17 and higher
was incorrectly done against a `cplusplus` define, while it should have
been `__cplusplus`.
Fix this by using `__cplusplus`, and also bump `__FreeBSD_version` so it
becomes possible to correctly check for `timespec_get()` in upstream
libc++ headers.
Reviewed by: brooks, emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D22735
Partially revert r354741 and r354754 and go back to allocating a
fixed-size chunk of stack space for the auxiliary vector. Keep
sv_copyout_auxargs but change it to accept the address at the end of
the environment vector as an input stack address and no longer
allocate room on the stack. It is now called at the end of
copyout_strings after the argv and environment vectors have been
copied out.
This should fix a regression in r354754 that broke the stack alignment
for newer Linux amd64 binaries (and probably broke Linux arm64 as
well).
Reviewed by: kib
Tested on: amd64 (native, linux64 (only linux-base-c7), and i386)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22695
of the sensor hardware. Part of the polling process involves signalling
the chip then waiting 20 milliseconds. This was being done with DELAY(),
which is a pretty rude thing to do in a callout. Now a taskqueue_thread
task is scheduled to do the polling, and because sleeping is allowed in
the task context, pause_sbt() replaces DELAY() for the 20ms wait.
r354875 pushed VCBUS <-> ARMC translations to runtime determination, but
incorrectly mapped addresses for the BCM2836 -- SOC_BCM2835 and SOC_BCM2836
are actually mutually exclusive, so the BCM2836 config (GENERIC) would have
taken the latter path in the header and used 0x3f000000 as peripheral start.
Easily fixed -- split out the BCM2836 into its own memmap config and use
that instead if SOC_BCM2836 is included. With this, we get back to userland
again.
Reported by: Marek Zarychta <zarychtam@plan-b.pwste.edu.pl>
This change adds PowerPC64 support for minidumps on libkvm.
Address translation, page walk, and data retrieval were tested and seem to be
working correctly.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D21555
This change enables the use of OpenFirmware Console (ofwcons), even when VGA is
available, allowing early kernel messages to be seen, that is important in case
of crashes before VGA console initialization.
This is specially useful in virtualized environments, where the user/developer
doesn't have full control of the virtualization engine (e.g. OpenStack).
The old behavior is preserved by default and, in order to use ofwcons, a few
tunables that have been introduced need to be set:
- hw.ofwfb.disable=1 - disable OFW FrameBuffer device
- machdep.ofw.mtx_spin=1 - change PPC OFW mutex to SPIN type, to match kernel
console's mutex type
- debug.quiesce_ofw=0 - don't call OFW quiesce, needed to keep ofwcons I/O
working
More details can be found at differential revision D20640.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D20640
This change makes it possible to use OPAL console as a GDB debug port.
Similar to uart and uart_phyp debug ports, it has to be enabled by
setting the hw.uart.dbgport variable to the serial console node
of the device tree.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D22649
Routing statistics requires somes symbols that are only loaded when not running
live. Load them only in that specific case
PR: 242423
Submitted by: olivier
MFC after: 3 days
to its successor in cases where examining a map entry requires a
helper like kvm_read_all. Use that method, with kvm_read_all, to fix
procstat_getfiles_kvm, which tries to find the successor now without
using such a helper. This addresses a problem introduced by r355491.
Reviewed by: markj (previous version)
Discussed with: kib
Differential Revision: https://reviews.freebsd.org/D22728
The current vnode layout is not smp-friendly by having frequently read data
avoidably sharing cachelines with very frequently modified fields. In
particular v_iflag inspected for VI_DOOMED can be found in the same line with
v_usecount. Instead make it available in the same cacheline as the v_op, v_data
and v_type which all get read all the time.
v_type is avoidably 4 bytes while the necessary data will easily fit in 1.
Shrinking it frees up 3 bytes, 2 of which get used here to introduce a new
flag field with a new value: VIRF_DOOMED.
Reviewed by: kib, jeff
Differential Revision: https://reviews.freebsd.org/D22715
1. replace hand-rolled macros for operation type with enum
2. unlock the vnode in vput itself, there is no need to branch on it. existence
of VPUTX_VPUT remains significant in that the inactive variant adds LK_NOWAIT
to locking request.
3. remove the useless v_usecount assertion. few lines above the checks if
v_usecount > 0 and leaves. should the value be negative, refcount would fail.
4. the CTR return vnode %p to the freelist is incorrect as vdrop may find the
vnode with holdcnt > 1. if the like should exist, it should be moved there
5. no need to error = 0 for everyone
Reviewed by: kib, jeff (previous version)
Differential Revision: https://reviews.freebsd.org/D22718
changed the sysctl format for the temperature from "I" to "IK", and
correspondingly changed the units from integer degrees C to decikelvin.
For access via sysctl(8) the output will be the same except that now
decimal fractions will be shown when available.
Previously the driver supported the DHT11 sensor. Now it supports
DHT11, DHT12, DHT21, DHT22, AM3201, AM3202.
All these chips are similar, differing primarily in supported temperature
and humidity ranges and accuracy (and, presumably, cost). There are two
basic data formats reported by the various chips, and it is possible to
figure out at runtime which format to use for decoding the data based on
the range of values in a single byte of the humidity measurement. (which
is detailed in a comment block, so I won't recapitulate it here).
functions to handle the sysctls, they all just access simple readonly
integer variables. There's no need to track the oids of the ones we add,
since the teardown is done by newbus code, not the driver itself.
Also remove the DDB code, because it just provides access to the same data
that the sysctls already provide.
At the end of a read cycle, set the gpio pin to INPUT rather than OUTPUT.
The state of the single-wire "bus" when idle should be high; setting the
pin to input allows the external pullup to pull the line high. Setting it
to output (and leaving it driving low) was leading a good read cycle followed
by one that would fail, and it just continued like that forever, effectively
reading the sensor once every 10 seconds instead of 5.
In the attach function, do an initial read from the device before registering
the sysctls for accessing the last-read values, to prevent reading spurious
values for the first 5 seconds after the driver attaches.
Do a callout_drain() in the detach function to prevent crashes after
unloading the module.
