Start the phasing out of TRE by disabling it by default. r317254 introduced
a BSD_GREP_FASTMATCH knob (defaulting to on) for testing of bsdgrep with and
without TRE enabled. More bugs have cropped up since then, and
WITHOUT_BSD_GREP_FASTMATCH has shown in testing to be more stable than its
counterpart.
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12381
In theory, all data access errors mean that a member is out of sync
at most. But they were treated as more serious errors to avoid the
situation where a flaky disk gets repeatedly disconnected, re-synchronized,
reconnected and then disconnected again.
ENXIO is a special error that means that the member disk disappeared,
so it should get the same handling as the GEOM orphaning event.
There is a better chance that when the disk is reconnected, it will be
a good member again.
When ENXIO happens on a read we use the exisiting G_MIRROR_BUMP_SYNCID
mechanism which means that the mirror's syncid is increased as soon
as there is a write to the mirror. That's because no data has got out
of sync yet, but the problematic memeber is disconnected, so the future
write will make it stale.
When ENXIO happens on a write we use a new G_MIRROR_BUMP_SYNCID_NOW
mechanism which means that we update the mirror metadata as soon as
possible because the problematic memeber is already behind.
Reviewed by: markj, imp
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D9463
The bad_session, sglist_error, and process_error sysctl nodes were
returning the value of the pad_error node instead of the appropriate
error counters.
Sponsored by: Chelsio Communications
When a newborn socket moves from incomplete queue to complete
one, we need to obtain the listening socket lock after the child,
which is a wrong order. The old code did that in potentially
endless loop of mtx_trylock(). The new one does only one attempt
of mtx_trylock(), and in case of failure references listening
socket, unlocks child and locks everything in right order. In
case if listening socket shuts down during that, just bail out.
Reported & tested by: Jason Eggleston <jeggleston llnw.com>
Reported & tested by: Jason Wolfe <jason llnw.com>
kernel. We can register callbacks to perform the required operation on the
saved registers before returning.
This is initially used to work around a bug in old versions of QEMU that
trigger such an exception when reading from an ID register when it should
load z zero value.
I expect this could be used with other exception types, e.g. to emulate
special register access from userland.
Sponsored by: DARPA, AFRL
An eventual devd(8) or other component should be able to scan buses and
automatically load drivers that match device ids described in this metadata.
Reviewed by: imp
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12364
The core note matches the format and layout of NT_ARM_VFP on Linux.
Debuggers use the AT_HWCAP flags to determine how many VFP registers
are actually used and their format.
Reviewed by: mmel (earlier version w/o gcore)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12293
Future changes will use these functions to fetch and store VFP state for
threads other than curthread.
Reviewed by: andrew, stevek, Michal Meloun <meloun-miracle-cz>
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12292
These flags match the meaning and value of flags in Linux, though
Linux has many more flags.
Reviewed by: stevek, Michal Meloun <meloun-miracle-cz> (earlier version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12291
A new 'u_long *sv_hwcap' field is added to 'struct sysentvec'. A
process ABI can set this field to point to a value holding a mask of
architecture-specific CPU feature flags. If an ABI does not wish to
supply AT_HWCAP to processes the field can be left as NULL.
The support code for AT_EHDRFLAGS was already present on all systems,
just the #define was not present. This is a step towards unifying the
AT_* constants across platforms.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12290
As long as mnt_ref is not zero there can be a consumer that might try
to access mnt_vnodecovered. For this reason the covered vnode must not
be freed until mnt_ref goes to zero.
So, move the release of the covered vnode to vfs_mount_destroy.
Reviewed by: kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D12329
gawk allows multiple arguemnts to bit-wiste and, or and xor
functions. Implement an arbitrary number of arguments for these
functions. Also, use NULL in preference to 0 to match rest of file.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D12361
These are from OpenBSD:
>>> Extend awk with bitwise operations. This is an extension to the awk
>>> spec and documented as such, but comes in handy from time to time.
>>> The prototypes make it compatible with a similar GNU awk extension.
>>>
>>> ok millert@, enthusiasm from deraadt@
Edited to fix cut and paste in error messages, as well as
using tabs instead of spaces after #defines added.
Obtained From: OpenBSD awk.h 1.12, lex.c 1.10, run.c 1.29
Differential Revision: https://reviews.freebsd.org/D12361
Sponsored by: Netflix
This effectively reverts r304877, after having relegated the warning
suppression to the zic(8) makefile in r323572.
Reviewed by: emaste
Sponsored by: Dell EMC Isilon
X-Differential Revision: https://reviews.freebsd.org/D12284
The problem is that fdrop() requires syscall context, as it may
enter sleep in some cases. The reason to use it in the original
non-blocking sendfile implementation, was to avoid use of global
ACCEPT_LOCK() on every I/O completion. Now in head sorele() no
longer requires this lock.
16 bits is only wide enough for kegs with an item size of up to 64KB.
At that size or larger, slab headers are typically offpage because the
item size is a multiple of the page size, but there is no requirement
that this be the case.
We can widen the field without affecting the layout of struct uma_keg
since the removal of uk_slabsize in r315077 left an adjacent hole.
PR: 218911
MFC after: 2 weeks
object' page queue under the single mutex lock.
First, all pages on the queue are prepared for free by calls to
vm_page_free_prep(), and pages which should not be returned to the
physical allocator (e.g. wired or fictitious) are simply removed from
the queue. On the second pass, vm_page_free_phys_pglist() inserts all
pages from the queue without relocking the mutex.
The change improves the object termination, e.g. on the process exit
where large anonymous memory objects otherwise cause relocks the free
queue mutex for each page. More, if several such processes are
exiting or execing in parallel, the mutex was highly contended on
the address space demolition.
Diagnosed and tested by: mjg (previous version)
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
and insertion into the phys allocator free queues vm_page_free_phys().
Also provide a wrapper vm_page_free_phys_pglist() for batched free.
Reviewed by: alc, markj
Tested by: mjg (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
other kernel infrastructure changes.
Note that this doesn't affect the base cxgb(4) NIC driver for T3 at all.
MFC after: No MFC.
Sponsored by: Chelsio Communications
On some AMD FCH devices driven by intpm(4) (read: mine), the SMBus I/O port
range is split in two and the low range is only 0x10 wide. intpm(4) does
not access any registers above 0x0f, so there is no need for the wider
range.
Discussed with: avg
Sponsored by: Dell EMC Isilon
generate_fat.sh does the following:
- create an 800kb zero-filled file
- create an md device backed by this file
- format the device fat12
- mount the filesystem
- create the EFI ESP directory structure
- create the EFI boot file (BOOTx64 for amd64, BOOTaa64 for aarch64, etc)
- Adds a marker to the beginning of the file, and pad it to 384kb
- 384kb was chosen as it is less than half of 800kb, thus allowing
users to keep a backup of their older boot file in the small partition
- Unmount the filesystem
- Scan the image and find the offset where the marker was inserted
- The process requires root, to make image generation easier, images for
each architecture are pregenerated, compressed with xz, and checked
into svn.
The Makefile that generates boot1.efifat does the following:
- Ensure the compiled boot1.efi file is no larger than the generated image
- Decompress the template created by generate-fat.sh
- dd the contents of boot1.efi into boot1.efifat starting at the offset
where the marker is found. This allows any file less than the maximum
size to be written into the fat filesystem without having to mount it,
so no root privileges are required.
Later work by imp and myself makes bsdinstall create a 200mb fat16 instead
of using this process, but it is retained to make image generation easier.
Submitted by: Eric McCorkle (original version)
Reviewed by: emaste, tsoome, Eric McCorkle
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D9680
available, in i2c controller drivers that require interrupts for transfers.
This is the result of auditing all 22 existing drivers that attach iicbus.
These drivers were the only ones remaining that require interrupts and were
not using config_intrhook to defer attachment. That has led, over the
years, to various i2c slave device drivers needing to use config_intrhook
themselves rather than performing bus transactions in their probe() and
attach() methods, just in case they were attached too early.
in UNIX sockets.
o Check that socket is still connected in uipc_ready(). If not
we are responsible to free mbufs.
o In uipc_send() if socket appears to be disconnected, but we
are sending data with pending I/Os, don't free mbufs.
Reported by: Kevin Bowling <kbowling llnw.com>
Tested by: Kevin Bowling <kbowling llnw.com>
PR: 222259
Reported by: Mark Martinec <Mark.Martinec ijs.si>
MFC after: 3 days
in favor of just rendering the manpage instead of relying on pre-formatted
catpages. Note, this does not impede the ability to use existing catpages,
it just removes the utility to generate them.
Reviewed by: imp, allanjude
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12317
Kegs for internal zones always keep the slab header in the slab itself.
Therefore, when determining the allocation size, we need to take the
slab header size into account.
Reported and tested by: ae, rakuco
Reviewed by: avg
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12342
