out dead USB HUB devices by implementing an error counter, so that the USB
enumeration thread does not spend all its time reading from non-responding
devices, blocking user-space access in the end.
Tested by: Matthias Apitz <guru@unixarea.de>
MFC after: 1 week
Sponsored by: Mellanox Technologies
This follows the example of other Capsicumized programs in /sbin.
Reported by: Manfred Antar <manfredantar@gmail.com>
MFC with: r342699
Sponsored by: The FreeBSD Foundation
It seems that libkern/mcount.c is the only consumer of vm/pmap.h that
does not include machine/atomic.h. Make it work by bringing
machine/atomic.h when pmap.h is used for kernel non-asm .c file.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
newvers.sh takes upwards of 4-5 seconds to complete on trees checked
out from github, due to searching the entire history for non-existent
git-svn metadata. Similarly, if one does not check out notes, we
again search the entire history for notes. That makes newvers.sh very
slow for many github users.
To fix this in a fair way, limit the history search to the last 10K
commits: if you're more than 10K commits out of sync, then you've
forked the project, and our SVN rev is no longer very important to you.
Due to how git implements --grep in conjunction with -n, --grep has been
removed for performance reasons (git does not seem to limit its search
to the -n limit in this case, and takes just as long as it did with no
limit).
Reviewed by: emaste, imp
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D18745
lib/csu/tests/dynamiclib requires libh_csu.so be built first. I'm not
sure this is the most correct/best way to address this but it solves
the issue in my testing.
PR: 233734
Sponsored by: The FreeBSD Foundation
With new sysctls (to the best of our ability do detect them). Restructured
smp.4 slightly for clarity (keep relevant stuff closer to the top) while
documenting.
Reviewed by: markj, jhibbits (ppc parts)
MFC after: 3 days
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D18322
pmap_kextract().
pmap_kextract() can race with promotion/demotion on the kernel page
table, in which case current non-atomic 64bit read would see torn
value, breaking pmap_kextract(). pmap_kextract() would correctly
handle either promoted or demoted PDE, but not a mix where one word
is from a different state.
It requires PAE and > 4G memory to reproduce. We observed this in
real loads, both for intensive use of malloc(9)/free(9) where
vtoslab() returned invalid pointer to the slab, and with the use of
busdma_bounce, where incorrect page was bounced.
In collaboration with: pho
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18714
As it does for recv*(2), MSG_DONTWAIT indicates that the call should
not block, returning EAGAIN instead. Linux and OpenBSD both implement
this, so the change makes porting easier, especially since we do not
return EINVAL or so when unrecognized flags are specified.
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: tuexen
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18728
It is useful for inspecting tlb shootdown hangs. The smp_tlb_generation value
is available using regular ddb data inspection commands.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
The MI kernel assumes that interrupts will not be enabled on APs until
after the first context switch. In particular, the problem was causing
occasional deadlocks during boot.
Remove an unneeded intr_disable() added in r335005.
Reviewed by: jhb (previous version)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18738
Perforce no longer offers a FreeBSD client and it not a viable VCS for
FreeBSD development. Remove p4 version logic to simplify newvers.sh in
advance of other changes.
Sponsored by: The FreeBSD Foundation
The function which processes Admin commands was not returning the
Command Specific value in Completion Queue Entry, Dword 0 (CDW0). This
effects commands such as Set Features, Number of Queues which returns
the number of queues supported by the device in CDW0. In this case, the
host will only create 1 queue pair (Number of Queues is zero based).
This also masked a bug in the queue counting logic.
Reviewed by: imp, araujo
Approved by: imp (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18703
Many size / length parameters in NVMe are "0's based", meaning, a value
of 0x0 represents 1, 0x1 represents 2, etc.. While this leads to an
efficient encoding, it can lead to subtle bugs. With respect to queues,
these parameters include:
- Maximum number of queue entries
- Maximum number of queues
- Number of Completion Queues
- Number of Submission Queues
To be consistent, convert all 0's based values from the host to 1's
based value internally. Likewise, covert internal 1's based values to
0's based values when returned to the host. This fixes an off-by-one bug
when creating IO queues and simplifies some of the code. Note that this
bug is masked by another bug.
While in the neighborhood,
- fix an erroneous queue ID check (checking CQ count when deleting SQ)
- check for queue ID of 0x0 in a few places where this is illegal
- clean up the Set Features, Number of Queues command and check for
illegal values
Reviewed by: imp, araujo
Approved by: imp (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D18702
Consider the case where FreeBSD is checked out via Subversion with a
(perhaps unrelated) .git or .hg directory at a higher level - for
example,
.../.git
.../src/freebsd
Previously newvers obtained the SVN revision information via svnversion,
and then tried to obtain the SVN revision corresponding to the git or hg
commit, overwriting the existing information.
As a short term fix use a different variable for hg-svn or git-svn
information, setting $svn from hg or git info only if not empty.
Reported by: Matthias Apitz
Sponsored by: The FreeBSD Foundation
When presented with an arg string like '-l-', getopt_long will successfully
parse out the 'l' short option, then proceed to match '--' against the first
longopts entry as it later does a strncmp with len=0. This latter bit is
arguably another bug in itself, but presumably not a practical issue as all
callers of parse_long_options are already doing the right thing (except this
one pointed out).
An opt string like '-l-' should be considered malformed and throw a bad
argument rather than behaving as if '--' were passed. It cannot possibly do
what the invoker expects, and it's probably the result of a typo (ls -l- a)
rather than any intent.
Reported by: Tony Overfield <toverfield@yahoo.com>
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18616
declare v3 objset size/layout to fix userboot and possibly other loader issues
- fix for userboot assertion failure in zfs_dev_close in free due to out of bounds write
- fix for zfs_alloc / zfs_free mismatch assertion failure when booting GPT on BIOS
Add a short description of the function to the appropriate man page and add
reference to it where it makes sense.
Reviewed by: bcr, markj, 0mp
Approved by: markj
Differential Revision: https://reviews.freebsd.org/D18725
This update does add diag and debug capabilities to interpret the efi
variables, configuration and protocols (lsefi).
The side effect is that we add/update bunch of related headers.
Don't bother zeroing the top-level page before freeing it. Previously,
the page was freed before being zeroed.
Reviewed by: jhb, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18720
The list will be removed with some future work.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18721
- Handle VM_PROT_EXECUTE.
- Clear PTE_D and mark the page dirty when removing write access
from a mapping.
- Atomically clear PTE_W to avoid clobbering a hardware PTE update.
Reviewed by: jhb, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18719
Otherwise prefaulted entries are not accessible from user mode and
end up triggering a fault upon access, so prefaulting has no effect.
Reviewed by: jhb, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18718
There's no need to use atomics when the previous value isn't needed.
No functional change intended.
Reviewed by: kib
Discussed with: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18717
We currently don't have a good way to dynamically detect whether the
kernel is running as a guest.
Reviewed by: jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18715
- Add 'device rtwn' to rtwn_pci(4) and rtwn_usb(4) config sample;
kernel will not compile otherwise.
- Refresh devices list in rtwn_usb(4); add 'chipset' column.
- Bump Dd after this commit and r342682.
MFC after: 4 days
- Use cap_fileargs(3) to open dump devices after entering capability
mode, and use cap_syslog(3) to log messages.
- Use a relative directory fd to open output files.
- Use zdopen(3) to compress kernel dumps in capability mode.
Reviewed by: cem, oshogbo
MFC after: 2 months
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18458
