lib/csu/tests/dynamiclib requires libh_csu.so be built first. I'm not
sure this is the most correct/best way to address this but it solves
the issue in my testing.
PR: 233734
Sponsored by: The FreeBSD Foundation
As it does for recv*(2), MSG_DONTWAIT indicates that the call should
not block, returning EAGAIN instead. Linux and OpenBSD both implement
this, so the change makes porting easier, especially since we do not
return EINVAL or so when unrecognized flags are specified.
Submitted by: Greg V <greg@unrelenting.technology>
Reviewed by: tuexen
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18728
When presented with an arg string like '-l-', getopt_long will successfully
parse out the 'l' short option, then proceed to match '--' against the first
longopts entry as it later does a strncmp with len=0. This latter bit is
arguably another bug in itself, but presumably not a practical issue as all
callers of parse_long_options are already doing the right thing (except this
one pointed out).
An opt string like '-l-' should be considered malformed and throw a bad
argument rather than behaving as if '--' were passed. It cannot possibly do
what the invoker expects, and it's probably the result of a typo (ls -l- a)
rather than any intent.
Reported by: Tony Overfield <toverfield@yahoo.com>
Reviewed by: imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18616
Add a short description of the function to the appropriate man page and add
reference to it where it makes sense.
Reviewed by: bcr, markj, 0mp
Approved by: markj
Differential Revision: https://reviews.freebsd.org/D18725
This merge brings in a couple new files, which needed to be attached to the
build; a new dependency on <limits.h>, which must be stubbed; and a name
change in the Context parameter constants, from ZSTD_p_foo to ZSTD_c_foo.
Significantly, it fixes a kernel build error with GCC where floating-point
functions were included in the kernel build, by hiding them under the same
compile-time #ifdef that already covered their invocation. That issue was
introduced to FreeBSD in the 1.3.7 update and tracked upstream here:
https://github.com/facebook/zstd/issues/1386
The full 1.3.8 release notes can be found on Github:
https://github.com/facebook/zstd/releases/tag/v1.3.8
Relnotes: yes
The long double aliases of double functions are only exposed as aliases if
LDBL_MANT_DIG is 53 (same as DBL_MANT_DIG). Without float.h included these
files were not exposing weak aliases as expected, leading to link failures
if programs use the *l functions. This should fix editors/calligra on
targets with 64-bit long double, which uses erfl and erfcl. Found on
powerpc64.
Reviewed by: kargl@
Addition of the new errno values requires adding new elements to
sys_errlist array, which is actually ABI-incompatible, since ELF
records the object size. Expand array in advance to 150 elements so
that we have our users to go over the issue only once, at least until
more than 53 new errors are added.
I did not bumped the symbol version, same as it was not done for
previous increases of the array size. Runtime linker only copies as
much data into binary object on copy relocation as the binary'object
specifies. This is not fixable for binaries which access sys_errlist
directly.
While there, correct comment and calculation of the temporary buffer
size for the message printed for unknown error. The on-stack buffer
is used only for the number and delimiter since r108603.
Requested by: mckusick
Reviewed by: mckusick, yuripv
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D18656
Error messages in gai_strerror(3) vary largely among OSs.
For new software we largely replaced the obsoleted EAI_NONAME and
with EAI_NODATA but we never updated the corresponding message to better
match the intended use. We also have references to ai_flags and ai_family
which are not very descriptive for non-developer end users.
Bring new new error messages based on informational RFC 3493, which has
obsoleted RFC 2553, and make them consistent among the header adn
manpage.
MFC after: 1 month
Differentical Revision: D18630
7.0.1 release r349250. There were no functional changes since the 7.0.1
rc3 import.
PR: 230240, 230355
Relnotes: yes
MFC after: 2 months
X-MFC-With: r341825
MacOS/Linux do not define struct cmsgcred but we need to bootstrap libnv
when building on non-FreeBSD systems. Since they are not used during
bootstrap we can just omit these two functions there.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D18472
This fixes the obscure endless loop seen with case-insensitive
patterns containing characters in 128-255 range; originally
found running GNU grep test suite.
Our regex implementation being kludgy translates the characters
in case-insensitive pattern to bracket expression containing both
cases for the character and doesn't correctly handle the case when
original character is in bitmap and the other case is not, falling
into the endless loop going through in p_bracket(), ordinary(),
and bothcases().
Reducing the bitmap to 0-127 range for multibyte locales solves this
as none of these characters have other case mapping outside of bitmap.
We are also safe in the case when the original character outside of
bitmap has other case mapping in the bitmap (there are several of those
in our current ctype maps having unidirectional mapping into bitmap).
Reviewed by: bapt, kevans, pfg
Differential revision: https://reviews.freebsd.org/D18302
check hash to the filesystem inodes. Access attempts to files
associated with an inode with an invalid check hash will fail with
EINVAL (Invalid argument). Access is reestablished after an fsck
is run to find and validate the inodes with invalid check-hashes.
This check avoids a class of filesystem panics related to corrupted
inodes. The hash is done using crc32c.
Note this check-hash is for the inode itself and not any of its
indirect blocks. Check-hash validation may be extended to also
cover indirect block pointers, but that will be a separate (and
more costly) feature.
Check hashes are added only to UFS2 and not to UFS1 as UFS1 is
primarily used in embedded systems with small memories and low-powered
processors which need as light-weight a filesystem as possible.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
There is no reason for it to behave differently from openat(fd, NULL).
Also the handling did not worked because the substituted path was from
the system address space, causing EFAULT.
Submitted by: Jack Halford <jack@gandi.net>
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18501
zdopen() can be used in capability mode. Update zopen.3 accordingly
and fix some grammar nits while I'm here.
Reviewed by: delphij
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18456
superblock has a check-hash error, an error message noting the
superblock check-hash failure is printed and the mount fails. The
administrator then runs fsck to repair the filesystem and when
successful, the filesystem can once again be mounted.
This approach fails if the filesystem in question is a root filesystem
from which you are trying to boot. Here, the loader fails when trying
to access the filesystem to get the kernel to boot. So it is necessary
to allow the loader to ignore the superblock check-hash error and make
a best effort to read the kernel. The filesystem may be suffiently
corrupted that the read attempt fails, but there is no harm in trying
since the loader makes no attempt to write to the filesystem.
Once the kernel is loaded and starts to run, it attempts to mount its
root filesystem. Once again, failure means that it breaks to its prompt
to ask where to get its root filesystem. Unless you have an alternate
root filesystem, you are stuck.
Since the root filesystem is initially mounted read-only, it is
safe to make an attempt to mount the root filesystem with the failed
superblock check-hash. Thus, when asked to mount a root filesystem
with a failed superblock check-hash, the kernel prints a warning
message that the root filesystem superblock check-hash needs repair,
but notes that it is ignoring the error and proceeding. It does
mark the filesystem as needing an fsck which prevents it from being
enabled for writing until fsck has been run on it. The net effect
is that the reboot fails to single user, but at least at that point
the administrator has the tools at hand to fix the problem.
Reported by: Rick Macklem (rmacklem@)
Discussed with: Warner Losh (imp@)
Sponsored by: Netflix
The list of syscalls that modify st_atim, st_mtim, and st_ctim was quite out
of date and probably not accurate to begin with. Update it, and make it
clear that the list is open-ended.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18410
The getdtablecount.c file won't compile on Linux but it seems like none of
the bootstrap tools actually need it.
Reviewed By: emaste, brooks
Differential Revision: https://reviews.freebsd.org/D14244
No references to any of these exist in the tree. The list was also
erratic with different architectures exporting different things
(arm64 and riscv exported none).
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18425
- breaks ports-mgmt/pkg build for mips64, powerpc64 and i386 for some users.
--- pkg-static ---
/usr/lib/liblzma.a(stream_encoder_mt.o): In function `mythread_cond_init':
/usr/local/poudriere/jails/ppc64/usr/src/contrib/xz/src/common/mythread.h:230:
undefined reference to `pthread_condattr_init'
Reported by: jhibbits zeising
An issue remains with BIND_NOW and processes using threads. For now,
restore libc's BIND_NOW disable, and also disable BIND_NOW in rtld and
libthr.
A patch is in review (D18400) that likely fixes this issue, but just
disable BIND_NOW pending further testing after it is committed.
PR: 233333
Sponsored by: The FreeBSD Foundation
in threaded programs that unload libraries.
Summary:
The GNOME update to 3.28 exposed a bug in __elf_phdr_match_addr(), which leads
to a crash when building devel/libsoup on powerpc64.
Due to __elf_phdr_match_addr() limiting its search to PF_X sections, on the
PPC64 ELFv1 ABI, it was never matching function pointers properly.
This meant that libthr was never cleaning up its atfork list in
__pthread_cxa_finalize(), so if a library with an atfork handler was unloaded,
libthr would crash on the next fork.
Normally, the null pointer check it does before calling the handler would avoid
this crash, but, due to PPC64 ELFv1 using function descriptors instead of raw
function pointers, a null check against the pointer itself is insufficient, as
the pointer itself was not null, it was just pointing at a function descriptor
that had been zeroed. (Which is an ABI violation.)
Calling a zeroed function descriptor on PPC64 ELFv1 causes a jump to address 0
with a zeroed r2 and r11.
Submitted by: git_bdragon.rtk0.net
Reviewed By: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18364
See the review for sample test results.
Reviewed by: kib (kernel part)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18401
Handling sizes of > 32 backwards will be updated later.
Reviewed by: kib (kernel part)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18387
Also remove logic to avoid unnecessary stores to the global variable.
Thread creation and destruction are heavy enough that any supposed savings
is in the noise.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
For non-ERMS case the code used handle possible trailing bytes with
movsb first and then followed it up with movsq. This also happened
to alter how calculations were done for other cases.
Handle the tail with regular movs, just like when copying forward.
Use leaq to calculate the right offset from the get go, instead of
doing separate add and sub.
This adjusts the offset for non-rep cases so that they can be used
to handle the tail.
The routine is still a work in progress.
Sponsored by: The FreeBSD Foundation
we were looking at the original URL rather than the one we were currently
processing. This meant that if we were trying to retrieve an HTTP URL but
were redirected to an HTTPS URL, and HTTPS proxying was enabled, we would
send an invalid request and most likely get garbage back.
MFC after: 3 days
from setting the volume serial number. This unbreaks older boot blocks
that don't support serial numbers, and allows boot0cfg to set the serial
number itself if requested by the user.
Submitted by: lev@, yuripv@
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D17386
There is probably a PR for this, but I can't find this, or remember who
submitted it. The patch got lost in the noise of another that wasn't
ready to commit.
MFC after: 3 days
