other files.
Arm and mips systems need to replace the SYSTEM_LD variable because they
need to create intermediate files which are post-processed with objcopy to
create the final .TARGET file. Previously they did so by pasting the full
expansion of SYSTEM_LD with the output filename replaced. This means
changing SYSTEM_LD in kern.pre.mk means you need to chase down anything that
replaces it and figure out how it differs so you can paste your changes in
there too.
Now there is a SYSTEM_LD_BASECMD variable that holds the entire basic kernel
linker command without the input and output files. This will allow arm and
mips makefiles to create their custom versions by refering to
SYSTEM_LD_BASECMD, which then becomes the one place where you have to make
changes to the basic linker command args.
Differential Revision: https://reviews.freebsd.org/D22921
SYSTEM_LD variable. This avoids duplicating the contents of SYSTEM_LD
from kern.pre.mk just to add the -N flag to it. If the basic linker command
ever needs to be changed, this will be one less place that has to be found
and fixed.
Some testing by kp@ indicates that the -N flag may not be needed at all,
so a comment to that effect is also added, and the -N flag may be removed
in a followup commit.
Differential Revision: https://reviews.freebsd.org/D22920
The VM generation counter is a 128-bit value exposed by the BIOS via ACPI.
The value changes to another unique identifier whenever a VM is duplicated.
Additionally, ACPI provides notification events when such events occur.
The driver decodes the pointer to the UUID, exports the value to userspace
via OPAQUE sysctl blob, and forwards the ACPI notifications in the form of
an EVENTHANDLER invocation as well as userspace devctl events.
See design paper: https://go.microsoft.com/fwlink/p/?LinkID=260709
This is lame, but it's what we already do for the clang build. We take
misaligned pointers into network header structures in many places.
Reviewed by: ian
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22876
The OpenCores I2C IP core can be found on any bus. Split out the PCI
bus specifics into their own file, only compiled on systems with PCI.
Reviewed by: kp
Sponsored by: Axiado
We use armv7/GENERIC for the RPI2 images. The original RPI2 is actually a
32-bit BCM2836, but v1.2 was upgraded to the 64-bit BCM2837. The project
continues to provide the RPI2 image as armv7, as it's the lowest common
denominator of the two. Historically, we've just kind of implicitly
acknowledged this by including some bcm2837 bits on a SOC_BCM2836 kernel
config -- this worked until r354875 added code that actually cared.
Acknowledge formally that BCM2837 is valid in arm32.
This name is inconsistent with the other BCM* SOC on !arm64 for two reasons:
1. It's a pre-existing option on arm64, and
2. the naming convention on arm/ should've arguably changed to include BRCM
#1 seems to be a convincing enough argument to maintain the existing name
for it.
array with a singleton.
Also, pccbb isa attachment is never going to happen, do disconnect it from the
build (will delete this in future commit). It would need to be updated as well,
but since this code is effectively dead code, remove it from the build instead.
Unfortunately, there are some limitations:
- memory aperture of his controller is only 16MiB, so it is nearly
unusable for graphic cards
- every attempt to generate type 1 config cycle always causes trap.
These config cycles are disabled now and we don't support cards
with PCIe switch.
- in some cases, attempt to do config cycle to (probably) not-yet ready
card also causes trap. This cannot be detected at runtime, but it seems
like very rare issue.
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D22724
We used to include the hisi version if soc_hisi_hi6220 was present,
include the altera version if dwmmc_altera was present and include
the rockchip version if soc_rockchip_rk3328 was present.
Now every version have it's own device directive.
The rockchip version isn't named dwmmc_rockchip because all other
rockchip driver are named rk_XXX.
MFC after: 1 month
These were obtained from the Chelsio Unified Wire v3.12.0.1 beta
release.
Note that the firmwares are not uuencoded any more.
MFH: 1 month
Sponsored by: Chelsio Communications
This change makes it possible to use OPAL console as a GDB debug port.
Similar to uart and uart_phyp debug ports, it has to be enabled by
setting the hw.uart.dbgport variable to the serial console node
of the device tree.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D22649
Summary:
There's no need to use the fallback fls() and flsl() libkern functions
when the PowerISA includes instructions that already do the bulk of the
work. Take advantage of this through the GCC builtins __builtin_clz()
and __builtin_clzl().
Reviewed by: luporl
Differential Revision: https://reviews.freebsd.org/D22340
In some cases, like is locked bootstrap or device's inability to boot from
removable media, we cannot use standard boot sequence and is necessary to
boot kernel directly from U-Boot.
Discussed with: jhibbits
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D13861
Uses two GPIO pins as MDC (clock) and MDIO (bidirectional I/O), relies
on mii_bitbang.
Tested on SG-3200 where the PHY for one of the ports is wired independently
of the SoC MDIO bus.
Sponsored by: Rubicon Communications, LLC (Netgate)
ConnectX-6 DX.
Currently TLS v1.2 and v1.3 with AES 128/256 crypto over TCP/IP (v4
and v6) is supported.
A per PCI device UMA zone is used to manage the memory of the send
tags. To optimize performance some crypto contexts may be cached by
the UMA zone, until the UMA zone finishes the memory of the given send
tag.
An asynchronous task is used manage setup of the send tags towards the
firmware. Most importantly setting the AES 128/256 bit pre-shared keys
for the crypto context.
Updating the state of the AES crypto engine and encrypting data, is
all done in the fast path. Each send tag tracks the TCP sequence
number in order to detect non-contiguous blocks of data, which may
require a dump of prior unencrypted data, to restore the crypto state
prior to wire transmission.
Statistics counters have been added to count the amount of TLS data
transmitted in total, and the amount of TLS data which has been dumped
prior to transmission. When non-contiguous TCP sequence numbers are
detected, the software needs to dump the beginning of the current TLS
record up until the point of retransmission. All TLS counters utilize
the counter(9) API.
In order to enable hardware TLS offload the following sysctls must be set:
kern.ipc.mb_use_ext_pgs=1
kern.ipc.tls.ifnet.permitted=1
kern.ipc.tls.enable=1
Sponsored by: Mellanox Technologies
Interrupt based driver, implements SPI mode and clock configuration.
Tested on espressobin and SG-3200.
Sponsored by: Rubicon Communications, LLC (Netgate)
When the linker doesn't have this feature, add -mno-relax to CFLAGS
on RISC-V.
Define the feature for ld.bfd, but not lld. If lld gains relaxation
support in a newer version, we can enable it for those versions of lld
in bsd.linker.mk.
Reviewed by: mhorne
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D22659
The hardware offload is primarily targeted for TLS v1.2 and v1.3,
using AES 128/256 bit pre-shared keys. This patch adds all the needed
hardware structures, capabilites and firmware commands.
Sponsored by: Mellanox Technologies
This controller is a bit tricky as the STOP condition must be indicated in
the last tranferred byte, some devices will not like the repeated start
behavior of this controller. A proper fix to this issue is in the works.
This driver works in polling mode, can be used early in the boot (required
in some cases).
Tested on espressobin/SG-1100 and the SG-3200.
Obtained from: pfSense
Sponsored by: Rubicon Communications, LLC (Netgate)
This makes it possible to retrieve per-connection statistical
information such as the receive window size, RTT, or goodput,
using a newly added TCP_STATS getsockopt(3) option, and extract
them using the stats_voistat_fetch(3) API.
See the net/tcprtt port for an example consumer of this API.
Compared to the existing TCP_INFO system, the main differences
are that this mechanism is easy to extend without breaking ABI,
and provides statistical information instead of raw "snapshots"
of values at a given point in time. stats(3) is more generic
and can be used in both userland and the kernel.
Reviewed by: thj
Tested by: thj
Obtained from: Netflix
Relnotes: yes
Sponsored by: Klara Inc, Netflix
Differential Revision: https://reviews.freebsd.org/D20655
After discussing with mmel@, it was clear this is insufficient to address
all the needs. mmel@ will commit his original patch, from
https://reviews.freebsd.org/D13861, and the additions needed from r354714
will be made afterward.
Requested by: mmel
Sponsored by: Juniper Networks, Inc.
r354290 removed arm.arm from universe, but arm.arm kernels were still
found and built during the kernel stage. r354934 tagged armv5 kernel
configs as NO_UNIVERSE, but LINT-V5 remained. Stop building it as well.
Leave the clean rule in place for now so folks don't end up with a stale
LINT-V5.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D22560
This change makes it possible to use a POWER Hypervisor virtual
terminal device (phyp vty) as a GDB debug port.
Similar to the uart debug port, it has to be enabled by setting
the hw.uart_phyp.dbgport variable to the vty node of the device
tree.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D22205
This adds support for ifnet (NIC) KTLS using Chelsio T6 adapters.
Unlike the TOE-based KTLS in r353328, NIC TLS works with non-TOE
connections.
NIC KTLS on T6 is not able to use the normal TSO (LSO) path to segment
the encrypted TLS frames output by the crypto engine. Instead, the
TOE is placed into a special setup to permit "dummy" connections to be
associated with regular sockets using KTLS. This permits using the
TOE to segment the encrypted TLS records. However, this approach does
have some limitations:
1) Regular TOE sockets cannot be used when the TOE is in this special
mode. One can use either TOE and TOE-based KTLS or NIC KTLS, but
not both at the same time.
2) In NIC KTLS mode, the TOE is only able to accept a per-connection
timestamp offset that varies in the upper 4 bits. Put another way,
only connections whose timestamp offset has the 28 lower bits
cleared can use NIC KTLS and generate correct timestamps. The
driver will refuse to enable NIC KTLS on connections with a
timestamp offset with any of the lower 28 bits set. To use NIC
KTLS, users can either disable TCP timestamps by setting the
net.inet.tcp.rfc1323 sysctl to 0, or apply a local patch to the
tcp_new_ts_offset() function to clear the lower 28 bits of the
generated offset.
3) Because the TCP segmentation relies on fields mirrored in a TCB in
the TOE, not all fields in a TCP packet can be sent in the TCP
segments generated from a TLS record. Specifically, for packets
containing TCP options other than timestamps, the driver will
inject an "empty" TCP packet holding the requested options (e.g. a
SACK scoreboard) along with the segments from the TLS record.
These empty TCP packets are counted by the
dev.cc.N.txq.M.kern_tls_options sysctls.
Unlike TOE TLS which is able to buffer encrypted TLS records in
on-card memory to handle retransmits, NIC KTLS must re-encrypt TLS
records for retransmit requests as well as non-retransmit requests
that do not include the start of a TLS record but do include the
trailer. The T6 NIC KTLS code tries to optimize some of the cases for
requests to transmit partial TLS records. In particular it attempts
to minimize sending "waste" bytes that have to be given as input to
the crypto engine but are not needed on the wire to satisfy mbufs sent
from the TCP stack down to the driver.
TCP packets for TLS requests are broken down into the following
classes (with associated counters):
- Mbufs that send an entire TLS record in full do not have any waste
bytes (dev.cc.N.txq.M.kern_tls_full).
- Mbufs that send a short TLS record that ends before the end of the
trailer (dev.cc.N.txq.M.kern_tls_short). For sockets using AES-CBC,
the encryption must always start at the beginning, so if the mbuf
starts at an offset into the TLS record, the offset bytes will be
"waste" bytes. For sockets using AES-GCM, the encryption can start
at the 16 byte block before the starting offset capping the waste at
15 bytes.
- Mbufs that send a partial TLS record that has a non-zero starting
offset but ends at the end of the trailer
(dev.cc.N.txq.M.kern_tls_partial). In order to compute the
authentication hash stored in the trailer, the entire TLS record
must be sent as input to the crypto engine, so the bytes before the
offset are always "waste" bytes.
In addition, other per-txq sysctls are provided:
- dev.cc.N.txq.M.kern_tls_cbc: Count of sockets sent via this txq
using AES-CBC.
- dev.cc.N.txq.M.kern_tls_gcm: Count of sockets sent via this txq
using AES-GCM.
- dev.cc.N.txq.M.kern_tls_fin: Count of empty FIN-only packets sent to
compensate for the TOE engine not being able to set FIN on the last
segment of a TLS record if the TLS record mbuf had FIN set.
- dev.cc.N.txq.M.kern_tls_records: Count of TLS records sent via this
txq including full, short, and partial records.
- dev.cc.N.txq.M.kern_tls_octets: Count of non-waste bytes (TLS header
and payload) sent for TLS record requests.
- dev.cc.N.txq.M.kern_tls_waste: Count of waste bytes sent for TLS
record requests.
To enable NIC KTLS with T6, set the following tunables prior to
loading the cxgbe(4) driver:
hw.cxgbe.config_file=kern_tls
hw.cxgbe.kern_tls=1
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21962
This Makefile sets KERN_OPTS. This permits kernel module Makefiles to
use KERN_OPTS to control the value of variables such as SRCS that are
used by bsd.kmod.mk for KERN_OPTS values that honor WITH/WITHOUT
options for standalone builds.
Update the NetBSD Kernel Concurrency Sanitizer (KCSAN) runtime to work in
the FreeBSD kernel. It is a useful tool for finding data races between
threads executing on different CPUs.
This can be enabled by enabling KCSAN in the kernel config, or by using the
GENERIC-KCSAN amd64 kernel. It works on amd64 and arm64, however the later
needs a compiler change to allow -fsanitize=thread that KCSAN uses.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22315
We could maintain the static conversions for the !AArch64 Raspberry Pis, but
I'm not sure it's worth it -- we'll traverse the platform list exactly once
(of which there are only two for armv7), then every conversion there-after
traverses the memory map listing of which there are at-most two entries for
these boards: sdram and peripheral space.
Detecting this at runtime is necessary for the AArch64 SOC, though, because
of the distinct IO windows being otherwise not discernible just from support
compiled into the kernel. We currently select the correct window based on
/compatible in the FDT.
We also use a similar mechanism to describe the DMA restrictions- the RPi 4
can have up to 4GB of RAM while the DMA controller and mailbox mechanism can
technically, kind of, only access the lowest 1GB. See the comment in
bcm2835_vcbus.h for a fun description/clarification of this.
Differential Revision: https://reviews.freebsd.org/D22301
It's still disabled by default, but now it can be enabled with config(5) and
it will be build in LINT.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D22383
The Supervisor Binary Interface (SBI) specification v0.2 is a backwards
incompatible update to the SBI call interface for kernels running in
supervisor mode. The goal of this update was to make it easier for new
and optional functionality to be added to the SBI.
SBI functions are now called by passing an "extension ID" and a
"function ID" which are passed in a7 and a6 respectively. SBI calls
will also return an error and value in the following struct:
struct sbi_ret {
long error;
long value;
}
This version introduces several new functions under the "base"
extension. It is expected that all SBI implementations >= 0.2 will
support this base set of functions, as they implement some essential
services such as obtaining the SBI version, CPU implementation info, and
extension probing.
Existing SBI functions have been designated as "legacy". For the time
being they will remain implemented, but it is expected that in the
future their functionality will be duplicated or replaced by new SBI
extensions. Each legacy function has been assigned its own extension ID,
and for now we simply probe and assert for their existence.
Compatibility with legacy SBI implementations (such as BBL) is
maintained by checking the output of sbi_get_spec_version(). This
function is guaranteed to succeed by the new spec, but will return an
error in legacy implementations. We use this as an indicator of whether
or not we can rely on the new SBI base extensions.
For further info on the Supervisor Binary Interface, see:
https://github.com/riscv/riscv-sbi-doc/blob/master/riscv-sbi.adoc
Reviewed by: kp, jhb
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D22326
This driver allows to usage of the paravirt SCSI controller
in VMware products like ESXi. The pvscsi driver provides a
substantial performance improvement in block devices versus
the emulated mpt and mps SCSI/SAS controllers.
Error handling in this driver has not been extensively tested
yet.
Submitted by: vbhakta@vmware.com
Relnotes: yes
Sponsored by: VMware, Panzura
Differential Revision: D18613
Summary:
Boot arm64 kernel using booti command from U-boot. booti can relocate initrd
image into higher ram addresses, therefore align the initrd load address to 1GiB
and create VA = PA map for it. Create L2 pagetable entries to copy the initrd
image into KVA.
(parts of the code in https://reviews.freebsd.org/D13861 was referred and used
as appropriate)
Submitted by: Siddharth Tuli <siddharthtuli_gmail.com>
Reviewed by: manu
Sponsored by: Juniper Networks, Inc
Differential Revision: https://reviews.freebsd.org/D22255
Fix wrong section ordering that was causing a ".got is not contiguous with
other relro sections" lld error. This also brings ldscript.powerpc and
ldscript.powerpcspe closer to ldscript.powerpc64.
Also, remove unnecessary text relocs from the ppc32 AIM trap code.
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D22349
- add support for fractional dividers
- allow to declare fixed and linked clock
MFC after: 3 weeks
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D22282
This kind of clock nodes represent temporary placeholder for clocks
defined later in boot process. Also, these are necessary to break
circular dependencies occasionally occurring in complex clock graphs.
MFC after: 3 weeks
These files already have 'device' lines that they require; adding a
dependency on SOC_* options is an extra restriction that adds extra
verbosity when future supported Broadcom-based SOC will also feature the
same compatible device.
Users wishing to not compile these devices in should remove the 'device'
lines from their config.
In the past, we would add symbolic links for MACHINE_CPUARCH when it differed
from MACHINE. This was for pc98 only, however. All other architectures didn't
need this and it was really due to pc98 pulling from i386 rather than something
more intrinsic. At the time, we had the split we did to mimic what NetBSD did
for its 68k ports where many different kernels were possible for the same
architecture. Since then, both projects have moved away from this convention to
having a more generic MACHINE for each architecture. FreeBSD's new arm64/aarch64
breaks this old notion and so was an exception to the rule. So, we no longer
need to create this link for any old machine or any new machine, delete it
entirely.
Differential Revision: https://reviews.freebsd.org/D22246
This involved several changes:
* Since lld does not like text relocations, replace SMP boot page text relocs
in booke/locore.S with position-independent math, and track the virtual base
in the SMP boot page header.
* As some SPRs are interpreted differently on clang due to the way it handles
platform-specific SPRs, switch m*dear and m*esr mnemonics out for regular
m*spr. Add both forms of SPR_DEAR to spr.h so the correct encoding is selected.
* Change some hardcoded 32 bit things in the boot page to be pointer-sized, and
fix alignment.
* Fix 64-bit build of booke/pmap.c when enabling pmap debugging.
Additionally, I took the opportunity to document how the SMP boot page works.
Approved by: jhibbits (mentor)
Differential Revision: https://reviews.freebsd.org/D21999
r351049 bogusly deleted these lines from files.amd64 but failed to add them to
files.x86. Since this works on i386, add them to files.x86 rather than just
adding them back to files.amd64.
PR: 240734
Reported by: Michael Pro
The debug monitor register state is now stored in a struct and updated
when required. Currently there is only a kernel state, however a
per-process state will be added in a future change.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22128
Use a separate make variable to specify the linker script so that it is
only applied at link time and not during intermediate generation of .fwo
files.
This ensures that the .text padding inserted by the amd64 linker script
is applied to the stub module load handlers embedded in firmware
modules.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D22125
This is a driver for the USB3 PHY present in the RK3399.
While the phy support DP (Display Port) the driver doesn't has we have
no driver to test this with for now.
All the lane and pll configuration is just magic values from rockchip.
While the manual have some info on those registers it's really hard to
understand how to calculate those values (if there is a way).
MFC after: 1 month
in simple multifunction driver.
- follow interrupt changes in DT. Split old ICU driver to function oriented
parts and add drivers for newly defined parts (system error interrupts).
- Many drivers are children of simple multifunction driver. But after r349596
simple MF driver doesn't longer exports memory resources, and all children
must use syscon interface to access their registers. Adapt affected
drivers to this fact.
MFC after: 3 weeks
- We load the kernel at 0x200000. Memory below that address need not
be executable, so do not map it as such.
- Remove references to .ldata and related sections in the kernel linker
script. They come from ld.bfd's default linker script, but are not
used, and we now use ld.lld to link the amd64 kernel. lld does not
contain a default linker script.
- Pad the .bss to a 2MB as we do between .text and .data. This
forces the loader to load additional files starting in the following
2MB page, preserving the use of superpage mappings for kernel data.
- Map memory above the kernel image with NX. The kernel linker now
upgrades protections as needed, and other preloaded file types
(e.g., entropy, microcode) need not be mapped with execute permissions
in the first place.
Reviewed by: kib
MFC after: 1 month
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21859
Use it to pad the text and read-only data sections to a 4KB boundary.
This will be used to enforce strict memory protections for some
sections of loadable kernel modules.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21970
NetGDB(4) is a component of a system using a panic-time network stack to
remotely debug crashed FreeBSD kernels over the network, instead of
traditional serial interfaces.
There are three pieces in the complete NetGDB system.
First, a dedicated proxy server must be running to accept connections from
both NetGDB and gdb(1), and pass bidirectional traffic between the two
protocols.
Second, the NetGDB client is activated much like ordinary 'gdb' and
similarly to 'netdump' in ddb(4) after a panic. Like other debugnet(4)
clients (netdump(4)), the network interface on the route to the proxy server
must be online and support debugnet(4).
Finally, the remote (k)gdb(1) uses 'target remote <proxy>:<port>' (like any
other TCP remote) to connect to the proxy server.
The NetGDB v1 protocol speaks the literal GDB remote serial protocol, and
uses a 1:1 relationship between GDB packets and sequences of debugnet
packets (fragmented by MTU). There is no encryption utilized to keep
debugging sessions private, so this is only appropriate for local
segments or trusted networks.
Submitted by: John Reimer <john.reimer AT emc.com> (earlier version)
Discussed some with: emaste, markj
Relnotes: sure
Differential Revision: https://reviews.freebsd.org/D21568
Debugnet is a simplistic and specialized panic- or debug-time reliable
datagram transport. It can drive a single connection at a time and is
currently unidirectional (debug/panic machine transmit to remote server
only).
It is mostly a verbatim code lift from netdump(4). Netdump(4) remains
the only consumer (until the rest of this patch series lands).
The INET-specific logic has been extracted somewhat more thoroughly than
previously in netdump(4), into debugnet_inet.c. UDP-layer logic and up, as
much as possible as is protocol-independent, remains in debugnet.c. The
separation is not perfect and future improvement is welcome. Supporting
INET6 is a long-term goal.
Much of the diff is "gratuitous" renaming from 'netdump_' or 'nd_' to
'debugnet_' or 'dn_' -- sorry. I thought keeping the netdump name on the
generic module would be more confusing than the refactoring.
The only functional change here is the mbuf allocation / tracking. Instead
of initiating solely on netdump-configured interface(s) at dumpon(8)
configuration time, we watch for any debugnet-enabled NIC for link
activation and query it for mbuf parameters at that time. If they exceed
the existing high-water mark allocation, we re-allocate and track the new
high-water mark. Otherwise, we leave the pre-panic mbuf allocation alone.
In a future patch in this series, this will allow initiating netdump from
panic ddb(4) without pre-panic configuration.
No other functional change intended.
Reviewed by: markj (earlier version)
Some discussion with: emaste, jhb
Objection from: marius
Differential Revision: https://reviews.freebsd.org/D21421
Automatically apply ldscript.kmod.${MACHINE_ARCH} if it exists.
We already have an i386-specific linker script; rename it accordingly.
Note that the linker script is applied when the object files are
partially linked. (For amd64 this is also the final link.)
Reviewed by: imp, kib
Discussed with: jhb
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21887
Summary:
The AmigaOne platform, encompassing the X5000 and A1222 at this time, is
based on the mpc85xx platform, but includes some things not listed in
the device tree. Some custom devices, like CPLD, could be added to the
device tree with an overlay, or other means. However, some cannot
easily be done, such as the power button interrupt.
The directory will also become a location to add AmigaOne platform drivers,
such as the aforementioned CPLD, and its children.
Reviewed by: bdragon
Differential Revision: https://reviews.freebsd.org/D21829
- Use a default -march of mips64 on N64 and N32 kernels.
- Set the endianness (via MIPS_ENDIAN) and ABI (via MIPS_ABI) in
CFLAGS from MACHINE_ARCH. ARCH_FLAGS now only sets a different
-march value if needed.
- TRAMP_ARCH_FLAGS inherits MIPS_ENDIAN from MACHINE_ARCH but does
not set the ABI since XLPN32 needs an N64 ABI for the trampoline
loader. When TRAMP_ARCH_FLAGS is used it must set both -march
and -mabi.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D22030
This adds support for H6 SoC.
Add a CCU driver for H6 that support all PLLs and most of the clocks
that we are intersted in for now (i2c, mmc, usb, etc ...)
MFC after: 1 month
Based on POWER9BSD implementation, with all POWER9 specific code removed and
addition of new methods in PPC64 MMU interface, to isolate platform specific
code. Currently, the new methods are implemented on pseries and PowerNV
(D21643).
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D21551
Previously they were defined in a header which was included exactly
once. Change this to follow the usual practice of putting definitions
in C files. No functional change intended.
Discussed with: tuexen
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
membar_producer is supposed to be a store-store barrier.
Also, in the code that FreeBSD has ported from illumos membar_producer
is used only with regular stores to regular memory (with respect to
caching).
We do not have an MI primitive for the store-store barrier, so
atomic_thread_fence_rel is the closest we have as it provides
(load | store) -> store barrier.
Previously, membar_producer was an empty function call on all 32-bit
arm-s, 32-bit powerpc, riscv and all mips variants. I think that it was
inadequate.
On other platforms, such as amd64, arm64, i386, powerpc64, sparc64,
membar_producer was implemented using stronger primitives than required
for a store-store barrier with respect to regular memory access.
For example, it used sfence on amd64 and lock-ed nop in i386 (despite TSO).
On powerpc64 we now use recommended lwsync instead of eieio.
On sparc64 FreeBSD uses TSO mode.
On arm64/aarch64 we now use dmb sy instead of dmb ish. Not sure if this
is an improvement, actually.
After this change we can drop opensolaris_atomic.S for aarch64, amd64,
powerpc64 and sparc64 as all required atomic operations have either
direct or light-weight mapping to FreeBSD native atomic operations.
Discussed with: kib
MFC after: 4 weeks
starting at the max. domain, and then work down. Then existing FreeBSD
drivers will attach. Interrupt routing from the VMD MSI-X to the NVME
drive is not well known, so any interrupt is sent to all children that
register.
VROC used Intel meta data so graid(8) works with it. However, graid(8)
supports RAID 0,1,10 for read and write. I have some early code to
support writes with RAID 5. Note that RAID 5 can have life issues
with SSDs since it can cause write amplification from updating the parity
data.
Hot plug support needs a change to skip the following check to work:
if (pcib_request_feature(dev, PCI_FEATURE_HP) != 0) {
in sys/dev/pci/pci_pci.c.
Looked at by: imp, rpokala, bcr
Differential Revision: https://reviews.freebsd.org/D21383
This provides a framework to define a template describing
a set of "variables of interest" and the intended way for
the framework to maintain them (for example the maximum, sum,
t-digest, or a combination thereof). Afterwards the user
code feeds in the raw data, and the framework maintains
these variables inside a user-provided, opaque stats blobs.
The framework also provides a way to selectively extract the
stats from the blobs. The stats(3) framework can be used in
both userspace and the kernel.
See the stats(3) manual page for details.
This will be used by the upcoming TCP statistics gathering code,
https://reviews.freebsd.org/D20655.
The stats(3) framework is disabled by default for now, except
in the NOTES kernel (for QA); it is expected to be enabled
in amd64 GENERIC after a cool down period.
Reviewed by: sef (earlier version)
Obtained from: Netflix
Relnotes: yes
Sponsored by: Klara Inc, Netflix
Differential Revision: https://reviews.freebsd.org/D20477
Create an attachment file for the existing ACPI attachment, and create a
new FDT attachment for the generic-ehci driver.
Submitted by: andrew (Original version)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19389
It was defined with the wrong MACHINE_ARCH previously. This permits
using an MFS image without defining MD_ROOT_SIZE which has various
benefits (one being that the build is able to treat the MFS image as
a dependency and properly re-link the kernel with the new image when
building with NO_CLEAN).
MFC after: 2 weeks
Sponsored by: DARPA
MPFS is a logical switch in the Mellanox device which forward packets
based on a hardware driven L2 address table, to one or more physical-
or virtual- functions. The physical- or virtual- function is required
to tell the MPFS by using the MPFS firmware commands, which unicast
MAC addresses it is requesting from the physical port's traffic.
Broadcast and multicast traffic however, is copied to all listening
physical- and virtual- functions and does not need a rule in the MPFS
switching table.
Linux commit: eeb66cdb682678bfd1f02a4547e3649b38ffea7e
MFC after: 3 days
Sponsored by: Mellanox Technologies
This driver is for the usb phy present on rockchip SoC.
It only support RK3399 and host mode for now.
The driver expose the usb clock needed by the usb controller.
PLL_MIPI is the last important PLL that we missed.
Add support for it.
Since it's one of the possible parent for TCON0 also add this clock
now that we can.
While here add some info about what video related clocks should be
enabled at boot and with what frequency.
The REPRODUCIBLE_BUILD option is actually managed in two separate
files. src.opts.mk governs the setting for world builds and
kern.opts.mk governs it for kernel builds. r350550 only changed the
default for world builds.
Reported by: emaste
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D21444
use epoch don't need Makefile tweaks.
The downside is that any developer who wants EPOCH_TRACE needs to
rebuild kernel in full, but that's fine.
Reviewed by: imp
properly nested and warns about recursive entrances. Unlike with locks,
there is nothing fundamentally wrong with such use, the intent of tracer
is to help to review complex epoch-protected code paths, and we mean the
network stack here.
Reviewed by: hselasky
Sponsored by: Netflix
Pull Request: https://reviews.freebsd.org/D21610
is a completely separate TCP stack (tcp_bbr.ko) that will be built only if
you add the make options WITH_EXTRA_TCP_STACKS=1 and also include the option
TCPHPTS. You can also include the RATELIMIT option if you have a NIC interface that
supports hardware pacing, BBR understands how to use such a feature.
Note that this commit also adds in a general purpose time-filter which
allows you to have a min-filter or max-filter. A filter allows you to
have a low (or high) value for some period of time and degrade slowly
to another value has time passes. You can find out the details of
BBR by looking at the original paper at:
https://queue.acm.org/detail.cfm?id=3022184
or consult many other web resources you can find on the web
referenced by "BBR congestion control". It should be noted that
BBRv1 (which this is) does tend to unfairness in cases of small
buffered paths, and it will usually get less bandwidth in the case
of large BDP paths(when competing with new-reno or cubic flows). BBR
is still an active research area and we do plan on implementing V2
of BBR to see if it is an improvement over V1.
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D21582
BERI stands for Bluespec Extensible RISC Implementation, based on MIPS.
BERI has not implemented standard MIPS perfomance monitoring counters,
instead it provides statistical counters.
BERI statcounters have a several limitations:
- They can't be written
- They don't support start/stop operation
- None of hardware interrupt is provided on a counter overflow.
So make it separate to hwpmc_mips module and support process/system
counting mode only.
Sponsored by: DARPA, AFRL
Add a very basic NVRAM driver for OPAL which can be used by the IBM
powerpc-utils nvram utility, not to be confused with the base nvram utility,
which only operates on powermac_nvram.
The IBM utility handles all partitions itself, treating the nvram device as
a plain store.
An alternative would be to manage partitions in the kernel, and augment the
base nvram utility to deal with different backing stores, but that
complicates the driver significantly. Instead, present the same interface
IBM's utlity expects, and we get the usage for free.
Tested by: bdragon
Intel Stratix 10 SoC includes a quad-core arm64 cluster and FPGA fabric.
This adds support for reconfiguring FPGA.
Accessing FPGA core of this SoC require the level of privilege EL3,
while kernel runs in EL1 (lower) level of privilege.
This provides an Intel service layer interface that uses SMCCC to pass
queries to the secure-monitor (EL3).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21454
PSCI code to use it.
This interface will also be used by Intel Stratix 10 platform.
This was not tested on arm due to lack of PSCI-enabled arm hardware
lying around.
Reviewed by: andrew
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21439
binaries (e.g. on any arch except amd64 and mips).
Otherwise, with lld 9, after https://reviews.llvm.org/rLLD356117, the
modules will get an additional PT_LOAD segment, which blows up kldxref,
since that has a hardcoded limit of 3 segments.
I could have alternatively bumped up that limit, but since kernel
modules do not use relro, the simplest workaround is to explicitly
disable it.
This makes clearing it (from locore.S) work without misaligned accesses
(which can trap to machine mode, and be slow).
Reviewed by: br
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D21538
Use the -march and -mabi flags for both gcc and clang as they are
compatible. Specify the "medium" code model separately as it goes by the
name "medany" under gcc, although they are equivalent.
Reviewed by: markj
Approved by: markj (mentor)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D21436
Currently LOCAL_MODULES= works, but LOCAL_MODULES="" causes build errors as
.for still has the empty string to loop over. An .if empty prior to the loop
was considered, but LOCAL_MODULES has empty quotes at that point and thus,
isn't empty. A better solution likely exists, but this floats us by for
now...
KTLS adds support for in-kernel framing and encryption of Transport
Layer Security (1.0-1.2) data on TCP sockets. KTLS only supports
offload of TLS for transmitted data. Key negotation must still be
performed in userland. Once completed, transmit session keys for a
connection are provided to the kernel via a new TCP_TXTLS_ENABLE
socket option. All subsequent data transmitted on the socket is
placed into TLS frames and encrypted using the supplied keys.
Any data written to a KTLS-enabled socket via write(2), aio_write(2),
or sendfile(2) is assumed to be application data and is encoded in TLS
frames with an application data type. Individual records can be sent
with a custom type (e.g. handshake messages) via sendmsg(2) with a new
control message (TLS_SET_RECORD_TYPE) specifying the record type.
At present, rekeying is not supported though the in-kernel framework
should support rekeying.
KTLS makes use of the recently added unmapped mbufs to store TLS
frames in the socket buffer. Each TLS frame is described by a single
ext_pgs mbuf. The ext_pgs structure contains the header of the TLS
record (and trailer for encrypted records) as well as references to
the associated TLS session.
KTLS supports two primary methods of encrypting TLS frames: software
TLS and ifnet TLS.
Software TLS marks mbufs holding socket data as not ready via
M_NOTREADY similar to sendfile(2) when TLS framing information is
added to an unmapped mbuf in ktls_frame(). ktls_enqueue() is then
called to schedule TLS frames for encryption. In the case of
sendfile_iodone() calls ktls_enqueue() instead of pru_ready() leaving
the mbufs marked M_NOTREADY until encryption is completed. For other
writes (vn_sendfile when pages are available, write(2), etc.), the
PRUS_NOTREADY is set when invoking pru_send() along with invoking
ktls_enqueue().
A pool of worker threads (the "KTLS" kernel process) encrypts TLS
frames queued via ktls_enqueue(). Each TLS frame is temporarily
mapped using the direct map and passed to a software encryption
backend to perform the actual encryption.
(Note: The use of PHYS_TO_DMAP could be replaced with sf_bufs if
someone wished to make this work on architectures without a direct
map.)
KTLS supports pluggable software encryption backends. Internally,
Netflix uses proprietary pure-software backends. This commit includes
a simple backend in a new ktls_ocf.ko module that uses the kernel's
OpenCrypto framework to provide AES-GCM encryption of TLS frames. As
a result, software TLS is now a bit of a misnomer as it can make use
of hardware crypto accelerators.
Once software encryption has finished, the TLS frame mbufs are marked
ready via pru_ready(). At this point, the encrypted data appears as
regular payload to the TCP stack stored in unmapped mbufs.
ifnet TLS permits a NIC to offload the TLS encryption and TCP
segmentation. In this mode, a new send tag type (IF_SND_TAG_TYPE_TLS)
is allocated on the interface a socket is routed over and associated
with a TLS session. TLS records for a TLS session using ifnet TLS are
not marked M_NOTREADY but are passed down the stack unencrypted. The
ip_output_send() and ip6_output_send() helper functions that apply
send tags to outbound IP packets verify that the send tag of the TLS
record matches the outbound interface. If so, the packet is tagged
with the TLS send tag and sent to the interface. The NIC device
driver must recognize packets with the TLS send tag and schedule them
for TLS encryption and TCP segmentation. If the the outbound
interface does not match the interface in the TLS send tag, the packet
is dropped. In addition, a task is scheduled to refresh the TLS send
tag for the TLS session. If a new TLS send tag cannot be allocated,
the connection is dropped. If a new TLS send tag is allocated,
however, subsequent packets will be tagged with the correct TLS send
tag. (This latter case has been tested by configuring both ports of a
Chelsio T6 in a lagg and failing over from one port to another. As
the connections migrated to the new port, new TLS send tags were
allocated for the new port and connections resumed without being
dropped.)
ifnet TLS can be enabled and disabled on supported network interfaces
via new '[-]txtls[46]' options to ifconfig(8). ifnet TLS is supported
across both vlan devices and lagg interfaces using failover, lacp with
flowid enabled, or lacp with flowid enabled.
Applications may request the current KTLS mode of a connection via a
new TCP_TXTLS_MODE socket option. They can also use this socket
option to toggle between software and ifnet TLS modes.
In addition, a testing tool is available in tools/tools/switch_tls.
This is modeled on tcpdrop and uses similar syntax. However, instead
of dropping connections, -s is used to force KTLS connections to
switch to software TLS and -i is used to switch to ifnet TLS.
Various sysctls and counters are available under the kern.ipc.tls
sysctl node. The kern.ipc.tls.enable node must be set to true to
enable KTLS (it is off by default). The use of unmapped mbufs must
also be enabled via kern.ipc.mb_use_ext_pgs to enable KTLS.
KTLS is enabled via the KERN_TLS kernel option.
This patch is the culmination of years of work by several folks
including Scott Long and Randall Stewart for the original design and
implementation; Drew Gallatin for several optimizations including the
use of ext_pgs mbufs, the M_NOTREADY mechanism for TLS records
awaiting software encryption, and pluggable software crypto backends;
and John Baldwin for modifications to support hardware TLS offload.
Reviewed by: gallatin, hselasky, rrs
Obtained from: Netflix
Sponsored by: Netflix, Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D21277
The netmap_pt.c module has become obsolete after
the refactoring that added netmap_kloop.c.
Remove it and unlink it from the build system.
MFC after: 1 week
Many arm kernel configs bogusly specified WERROR=-Werror. There's no
reason for this because the default is that and there's no reason to
override. These date from a time when we needed to add additional
warning->error suppression. They are obsolete and were cut and paste
propagated from file to file.
Comment out all the WERROR=.... lines in powerpc. They aren't bogus,
but were appropriate for the old defaults for gcc4.2.1. Now that we've
made the policy decision to suppress -Werror by default on these
platforms, it is appropriate to comment these out. People wishing to
fix these errors can still un-comment them out, or say WERROR=-Werror
on the command line.
Fix two instances (cut and paste propagation) of hard-coded -Werror
in x86 code. Replace with ${WERROR} instead. This is a no-op change
except for people who build WERROR=-Wno-error :).
This should fix tinderbox / CI breakage.
Strip comments from the NOTES.armv[57] files as is done for other
NOTES files when building the corresponding LINT configs. Without
this, the LINT configs contained the NO_UNIVERSE comment from the
NOTES.armv[57] files.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21264
As part of marching gcc 4.2.1 out of the tree, turn off -Werror on gcc 4.2.1
compiles by default. It generates too many false positives and breaks CI
for no benefit.
Discussed on: arch@
Reviewed by: jhb@, emaste@, pfg@
Differential Revision: https://reviews.freebsd.org/D21378
Intel has created RST and many laptops from vendors like Lenovo and Asus. It's a
mechanism for creating multiple boot devices under windows. It effectively hides
the nvme drive inside of the ahci controller. The details are supposed to be a
trade secret. However, there's a reverse engineered Linux driver, and this
implements similar operations to allow nvme drives to attach. The ahci driver
attaches nvme children that proxy the remapped resources to the child. nvme_ahci
is just like nvme_pci, except it doesn't do the PCI specific things. That's
moved into ahci where appropriate.
When the nvme drive is remapped, MSI-x interrupts aren't forwarded (the linux
driver doesn't know how to use this either). INTx interrupts are used
instead. This is suboptimal, but usually sufficient for the laptops these parts
are in.
This is based loosely on https://www.spinics.net/lists/linux-ide/msg53364.html
submitted, but not accepted by, Linux. It was written by Dan Williams. These
changes were written from scratch by Olivier Houchard.
Submitted by: cognet@ (Olivier Houchard)
Nvme drives can be attached in a number of different ways. Separate out the PCI
attachment so that we can have other attachment types, like ahci and various
types of NVMeoF.
Submitted by: cognet@
Add helper function for synchronous execution of HCI commands at probe
stage and use this function to check firmware state of Intel Wireless
8260/8265 bluetooth devices found in many post 2016 year laptops.
Attempt to initialize FreeBSD bluetooth stack while such a device is in
bootloader mode locks the adapter hardly so it requires power on/off
cycle to restore.
This change blocks ng_ubt attachment unless operational firmware is
loaded thus preventing the lock up.
PR: 237083
Reviewed by: hps, emax
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21071
NTB Tool driver is meant for testing NTB hardware driver functionalities,
such as doorbell interrupts, link events, scratchpad registers and memory
windows. This is a port of ntb_tool driver from Linux. It has been
verified on top of AMD and PLX NTB HW drivers.
Submitted by: Arpan Palit <arpan.palit@amd.com>
Cleaned up by: mav
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D18819
enough that unification will have to wait for the next pass.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
specific, and only builds there. Likewise the module is built there. Move it to
the x86-only files.x86.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
Apart from one MD file, ACPI is a x86 implementation, not specific to either
i386 or amd64, so put it into files.x86. Other architectures include fewer
files for the same options, so it can't move into the MI files file.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
VIA Padlock support is for VIA C3, C7 and Eden processors, which are 64bit x86
processors.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
The HPT drivers are all x86 only. Move them to files.x86. Because of the way we
run uudecode, we can use $M instead of needing entries for them in separate
files.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
Move all the identical x86 lines to files.x86. The non-identical ones should be
unified and moved as well, but that would require additional changes that would
need a more careful review and may not be MFCable, so I'll do them
separately. I'll delete the mildly snarky comment when things are unified.
Reviewed by: jhb (verbal OK on irc)
Differential Revision: https://reviews.freebsd.org/D21248
The Zstd format bumps the CLOOP major number to 4 to avoid incompatibility
with older systems. Support in geom_uzip(4) is conditional on the ZSTDIO
kernel option, which is enabled in amd64 GENERIC, but not all in-tree
configurations.
mkuzip(8) was modified slightly to always initialize the nblocks + 1'th
offset in the CLOOP file format. Previously, it was only initialized in the
case where the final compressed block happened to be unaligned w.r.t.
DEV_BSIZE. The "Fake" last+1 block change in r298619 means that the final
compressed block's 'blen' was never correct unless the compressed uzip image
happened to be BSIZE-aligned. This happened in about 1 out of every 512
cases. The zlib and lzma decompressors are probably tolerant of extra trash
following the frame they were told to decode, but Zstd complains that the
input size is incorrect.
Correspondingly, geom_uzip(4) was modified slightly to avoid trashing the
nblocks + 1'th offset when it is known to be initialized to a good value.
This corrects the calculated final real cluster compressed length to match
that printed by mkuzip(8).
mkuzip(8) was refactored somewhat to reduce code duplication and increase
ease of adding other compression formats.
* Input block size validation was pulled out of individual compression
init routines into main().
* Init routines now validate a user-provided compression level or select
an algorithm-specific default, if none was provided.
* A new interface for calculating the maximal compressed size of an
incompressible input block was added for each driver. The generic code
uses it to validate against MAXPHYS as well as to allocate compression
result buffers in the generic code.
* Algorithm selection is now driven by a table lookup, to increase ease of
adding other formats in the future.
mkuzip(8) gained the ability to explicitly specify a compression level with
'-C'. The prior defaults -- 9 for zlib and 6 for lzma -- are maintained.
The new zstd default is 9, to match zlib.
Rather than select lzma or zlib with '-L' or its absense, respectively, a
new argument '-A <algorithm>' is provided to select 'zlib', 'lzma', or
'zstd'. '-L' is considered deprecated, but will probably never be removed.
All of the new features were documented in mkuzip.8; the page was also
cleaned up slightly.
Relnotes: yes
Follow-up on r322318 and r322319 and remove the deprecated modules.
Shift some now-unused kernel files into userspace utilities that incorporate
them. Remove references to removed GEOM classes in userspace utilities.
Reviewed by: imp (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21249
