Etherswitch support is built by default on all SoCs except RT3662/RT3883
as they have no built-in switch and their configurations with external
switches are not yet supported.
Sponsored by: Smartcom - Bulgaria AD
Add more 'compatible' strings found in various LEDE DTS files.
Reviewed by: adrian
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6432
needed in later changes where we may not be able to lock the pic list lock
to perform a lookup, e.g. from within interrupt context.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
PCIe PHY needs different initialization on MT7628/MT7688 SoCs than it does
on MT7620.
However, LEDE (and OpenWRT) dts files have the PCIe node for MT7628/MT7688
as compatible with mt7620-pci.
We already can handle this properly in our driver, so we just need to add
compat strings to fbsd-mt7628an.dtsi and the PCIe driver.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6395
Relies on BHND(4) driver.
There files contains machine-dependent code for Broadcom MIPS processor and
provide UART driver.
This is a work in progress; it and the current bhnd code is enough to boot
on the ASUS RT-N16 and RT-N53 platforms.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Differential Revision: https://reviews.freebsd.org/D6251
interface with 5 methods to mirror the 5 MSI/MSI-X methods in the pcib
interface. The pcib driver will need to perform a device specific lookup
to find the MSI controller and pass this to intrng as the xref. Intrng
will finally find the controller and have it handle the requested operation.
Obtained from: ABT Systems Ltd
MFH: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5985
legacy siba sentry5 cpu glue.
The siba_cc code is the hard-coded chipcommon bits for the sentry s5,
which will eventually be replaced with the more flexible bhnd sipa/cc
code.
bwn, etc uses siba_bwn, which doesn't use siba or siba_cc to do anything.
Allow output pins to be read and input pins to be set.
Fix bugs where we were trying to access the gpio softc before doing
device_get_softc.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6222
struct associated with some type defined in enum intr_map_data_type
must have struct intr_map_data on the top of its own definition now.
When such structs are used, correct type and size must be filled in.
There are three such structs defined in sys/intr.h now. Their
definitions should be moved to corresponding headers by follow-up
commits.
While this change was propagated to all INTRNG like PICs,
pic_map_intr() method implementations were corrected on some places.
For this specific method, it's ensured by a caller that the 'data'
argument passed to this method is never NULL. Also, the return error
values were standardized there.
64-bit MIPS, use superpage rather than physical-segment constants, or
we may improperly fail to apply suitable alignment -- yet still allow
mmap() to appear to succeed.
Reviewed by: sson
MFC after: 1 week
Sponsored by: DARPA, AFRL
Rescanning a PCI bus uses the following steps:
- Fetch the current set of child devices and save it in the 'devlist'
array.
- Allocate a parallel array 'unchanged' initalized with NULL pointers.
- Scan the bus checking each slot (and each function on slots with a
multifunction device).
- If a valid function is found, look for a matching device in the 'devlist'
array. If a device is found, save the pointer in the 'unchanged' array.
If a device is not found, add a new device.
- After the scan has finished, walk the 'devlist' array deleting any
devices that do not have a matching pointer in the 'unchanged' array.
- Finally, fetch an updated set of child devices and explicitly attach any
devices that are not present in the 'unchanged' array.
This builds on the previous changes to move subclass data management into
pci_alloc_devinfo(), pci_child_added(), and bus_child_deleted().
Subclasses of the PCI bus use custom rescan logic explicitly override the
rescan method to disable rescans.
Differential Revision: https://reviews.freebsd.org/D6018
The purpose of this file was to simply detect the UART speed before
attaching the actual ns8250 driver so that we don't have to specify the
UART speed in DTS files.
However, OpenWRT DTS files specify ns16550a as a compatible string in
their DTS files and this makes the original ns8250 driver attach to
the device. So we would have to edit the DTS files anyway and since this
is only the case for MT7621 and MT7628/MT7688 for now, it's better to
just add the clock-frequency property to those (UART is always clocked
by the same clock in both these SoCs, so that's fine) instead of having
a separate driver and still having to change the DTS files.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6044
This allows us to come closer to OpenWRT vanilla DTS files.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6045
This allows us to get closer to OpenWRT DTS files and minimize the diffs
a little more.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6042
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.
This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
Only compile what each SoC needs and get rid of MEDIATEK generic config.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5996
This revision makes the mtk_gpio_v1 driver read its register map property
from the OpenWRT dts files.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D6029
The driver can read and parse the OpenWRT pinctrl dts entries.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5999
OpenWRT's dts files treat RT3050/RT3052/RT3350 within the same SoC dtsi
file, so we need to distinguish between the three dynamically, mainly
because the bit we use to determine the clock speed on RT3050/RT3052
can actually be floating on RT3350 and RT3350 is always at 320MHz.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5983
Add suppport for passing boot arguments via FDT for mediatek/ralink SoCs.
This was taken from kan's work on CI20.
Since most OpenWRT dts files have bootargs defined, we use bsdbootargs
to specify FreeBSD specific arguments.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5979
Revision 298068 changed MIPS_INTRNG and ARM_INTRNG to simply INTRNG.
MEDIATEK_BASE config was missed by this revision, so we change
MIPS_INTRNG to INTRNG here.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5978
This revision gets our Mediatek/Ralink drivers closer to OpenWRT's dts
definitions, so we can reuse them with less modifications later in order
to bring support for a lot of boards at once.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5961
This is actually initialized properly within xhci.c, so it's better to
not initialize it in mtk_xhci.c
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5935
the following:
1. Give the appropriate board dts file to be used by either:
1.1. edit the SoC kernel config required (e.g., MT7620A_FDT) and include
the required FDT_DTS_FILE makeoption; or
1.2. simply supply FDT_DTS_FILE="xx.dts" on the command line when building
the kernel
Of course, the user can also create a completely new kernel config to
match the desired board and include the SoC kernel config from within
it.
If required, edit the MEDIATEK config file, which includes optional
drivers and comment out the unneeded ones.
2.1. this would only make sense if kernel size is a concern. Even if we
build the kernel with all drivers, if we lzma it and package it as a uImage,
its size is still around 1.1MiB.
The user will have to choose a dts file (or create a new one) from
sys/gnu/dts/mips , where all Mediatek/Ralink dts files will be imported via
a later revision.
Approved by: adrian (mentor)
Sponsored by: Smartcom - Bulgaria AD
Differential Revision: https://reviews.freebsd.org/D5966
The ACPI and OFW PCI bus drivers as well as CardBus override this to
allocate the larger ivars to hold additional info beyond the stock PCI ivars.
This removes the need to pass the size to functions like pci_add_iov_child()
and pci_read_device() simplifying IOV and bus rescanning implementations.
As a result of this and earlier changes, the ACPI PCI bus driver no longer
needs its own device_attach and pci_create_iov_child methods but can use
the methods in the stock PCI bus driver instead.
Differential Revision: https://reviews.freebsd.org/D5891
