Ensure that an opening bracket always has a matching closing one.
Ensure that there is always a new-line at the end of a report line.
Also, add a space before the printed event flag.
Reviewed by: anish
The defined bits are the lower bits, not the higher ones.
Also, the specification has been extended to define bits 0:18 and they
all could potentially be interesting to us, so extend the width of the
field accordingly.
Reviewed by: anish
Many 8-byte entries have zero at byte 4, so the second 4-byte part is
skipped as a 4-byte padding entry. But not all 8-byte entries have that
property and they get misinterpreted.
A real example:
48 00 00 00 ff 01 00 01
This an 8-byte ACPI_IVRS_TYPE_SPECIAL entry for IOAPIC with ID 255 (bogus).
It is reported as:
ivhd0: Unknown dev entry:0xff
Fortunately, it was completely harmless.
Also, bail out early if we encounter an entry of a variable length type.
We do not have proper handling for those yet.
Reviewed by: anish
SPA_MAXBLOCKSIZE is 16 MB and having such a large object on the stack is
not nice in general and it could cause some confusing failures in the
single-user mode where the default stack size of 8 MB is used.
I expect that the upstream would make the same change.
MFC after: 1 week
Upon successful completion, the execve() system call invokes
exec_setregs() to initialize the registers of the initial thread of the
newly executed process. What is weird is that when execve() returns, it
still goes through the normal system call return path, clobbering the
registers with the system call's return value (td->td_retval).
Though this doesn't seem to be problematic for x86 most of the times (as
the value of eax/rax doesn't matter upon startup), this can be pretty
frustrating for architectures where function argument and return
registers overlap (e.g., ARM). On these systems, exec_setregs() also
needs to initialize td_retval.
Even worse are architectures where cpu_set_syscall_retval() sets
registers to values not derived from td_retval. On these architectures,
there is no way cpu_set_syscall_retval() can set registers to the way it
wants them to be upon the start of execution.
To get rid of this madness, let sys_execve() return EJUSTRETURN. This
will cause cpu_set_syscall_retval() to leave registers intact. This
makes process execution easier to understand. It also eliminates the
difference between execution of the initial process and successive ones.
The initial call to sys_execve() is not performed through a system call
context.
Reviewed by: kib, jhibbits
Differential Revision: https://reviews.freebsd.org/D13180
either aborts or exits, but never returns. Tag it as a non-returning
function rather than supply a bogus return(0) at the end of main.
CID: 1382885
Sponsored by: Netflix
greater than 2^31-1, then the result will be huge. This is unlikely,
as we don't support that many sections, but out of an abundace of
caution cast to size_t so the multiplication won't overflow
mysteriously when size_t is larger than 32-bits. The resulting code
may be a smidge larger, but this isn't super-space critical code.
CID: 1194216, 1194217, 1194222, 1194223, 1265018, 1265019,1265020,
1265021
Sponsored by: Netflix
A ccu driver was added for the a83t in r326114. Add compat string to
aw_ccung and register the clocks for the a83t upon attach.
Reviewed by: manu
Approved by: emaste (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D13205
AHCI emulation is useful for testing scenarios closer to the real
hardware. For example, it allows to exercise the CAM subsystem.
There could be other uses as well.
MFC after: 2 weeks
This value may be set by userspace so we need to check it before using it.
If this is not done correctly on exception return the kernel may continue
in kernel mode with all registers set to a userspace controlled value. Fix
this by moving the check into set_mcontext, and also add the missing
sanitisation from the arm64 set_regs.
Discussed with: security-officer@
MFC after: 3 days
Sponsored by: DARPA, AFRL
From binutils commits 5a4b0ccc20ba30caef53b01bee2c0aaa5b855339 and
7e1e19887abd24aeb15066b141cdff5541e0ec8e, made available under GPLv2
by Nick Clifton.
PR: 198824
MFC after: 1 week
Security: CVE-2014-8501
Security: CVE-2014-8502
From binutils commit 0102ea8cec5fc509bba6c91df61b7ce23a799d32, made
available under GPLv2 by Nick Clifton.
PR: 198824
MFC after: 1 week
Security: CVE-2014-8503
We may create probes in the nascent child process, so we first need to
ensure that any inherited tracepoints are first removed. Otherwise the
probe sites will not be in the state expected by fasttrap, and it won't
be able to enable the probes.
MFC after: 2 weeks
A negative value can be used to suppress all prints from the gmirror
kernel code, which can be useful when attempting to trigger race
conditions using stress tests.
MFC after: 1 week
can be used prior to the ISCSIDHANDOFF IOCTL which set the negotiated values.
Else the login PDU will fail when passing the "-r" option to "iscsictl" which
means iSCSI over RDMA instead of TCP/IP.
Discussed with: np@ and trasz@
Sponsored by: Mellanox Technologies
MFC after: 1 week
Hide the locking logic used in the dynamic states implementation from
generic code. Rename ipfw_install_state() and ipfw_lookup_dyn_rule()
function to have similar names: ipfw_dyn_install_state() and
ipfw_dyn_lookup_state(). Move dynamic rule counters updating to the
ipfw_dyn_lookup_state() function. Now this function return NULL when
there is no state and pointer to the parent rule when state is found.
Thus now there is no need to return pointer to dynamic rule, and no need
to hold bucket lock for this state. Remove ipfw_dyn_unlock() function.
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D11657
Upstream DTS has switched to using CCU rather than /clocks nodes. Add a CCU
driver for the a83t to bring us closer to upstream, but don't yet attach it
to ccu node.
Reviewed by: manu
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12843
Add a means to specify mask/value for the prediv condition instead of
shift/width/value for clocks that have a more complex mux scenario.
Specifically, ahb1 on the a83t has the prediv applied if mux is either b10
or b11.
Reviewed by: manu
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12851
An assertion was modified to use the found value, but it was not updated to
handle a race where blocked threads appear after the entrance to the func.
Move the assertion down to the area protected with sleepq lock where the
lock is read anyway. This does not affect coverage of the assertion and
is consistent with what rw locks are doing.
Reported by: Shawn Webb
The driver is functional on both BHND Wi-Fi adapters and MIPS SoCs, but
does not currently include support for features not required by bwn(4),
including GPIO interrupt handling.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12708
The pair is of use only in debug or LOCKPROF kernels, but was passed (zeroed)
for many locks even in production kernels.
While here whack the tid argument from wlock hard and xlock hard.
There is no kbi change of any sort - "external" primitives still accept the
pair.
The bwn(4) driver requires a number of extensions to the bhnd(4) PMU
interface to support external configuration of PLLs, LDOs, and other
parameters that require chipset or PHY-specific workarounds.
These changes add support for:
- Writing raw voltage register values to PHY-specific LDO regulator
registers (required by LP-PHY).
- Enabling/disabling PHY-specific LDOs (required by LP-PHY)
- Writing to arbitrary PMU chipctrl registers (required for common PHY PLL
reset support).
- Requesting chipset/PLL-specific spurious signal avoidance modes.
- Querying clock frequency and latency.
Additionally, rather than updating legacy PWRCTL support to conform to the
new PMU interface:
- PWRCTL API is now provided by a bhnd_pwrctl_if.m interface.
- Since PWRCTL is only found in older SSB-based chipsets, translation from
bhnd(4) bus APIs to corresponding PWRCTL operations is now handled
entirely within the siba(4) driver.
- The PWRCTL-specific host bridge clock gating APIs in bhnd_bus_if.m have
been lifted out into a standalone bhnd_pwrctl_hostb_if.m interface.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12664
sa(4) has some unique behavior that is special-cased in cam_get_device. The
existing tests don't provide coverage for this special case.
Reviewed by: ken
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D13185
On KERN_NO_SPACE error, as it is returned now, vm_map_find() continues
the loop searching for the suitable range for the requested mapping
with specific alignment. Since the vm_map_findspace() succesfully
finds the same place, the loop never ends.
The errors returned from vm_map_stack() completely repeat the behavior
of vm_map_insert() now, as suggested by Alan.
Reported by: Arto Pekkanen <aksyom@gmail.com>
PR: 223732
Reviewed by: alc, markj
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D13186
second scan of the address space with find_space = VMFS_ANY_SPACE is
performed. Previously, vm_map_find() released and reacquired the map lock
between the first and second scans. However, there is no compelling
reason to do so. This revision modifies vm_map_find() to retain the map
lock.
Reviewed by: jhb, kib, markj
MFC after: 1 week
X-Differential Revision: https://reviews.freebsd.org/D13155
The test creates a D library with a "depends_on library" pragma
referencing a non-existent library, and expects compilation to fail.
However, as far as I can tell, libdtrace is supposed simply abort
compilation of the library in this case, and continue. This behaviour
is desirable when adding libraries which depend on optional KLDs, for
example.
MFC after: 1 week
When you install a computer for the first time, the date in the CMOS sometimes
not accurate and you need to ntpdate as ntpd will fail a the time difference
is too big.
Add an option in bsdinstall to enable ntpdate that will do that for us.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D13149
r309934 cleaned up some cases in bsdinstall to use heredocs but broke
the indentation of the generated output, because <<- heredocs strip
leading tabs.
PR: 221982
Reviewed by: allanjude, dteske
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13190
