Remove duplicate 'ni->ni_associd = 0' assignment from
ieee80211_node_leave(), since it breaks iv_set_tim() in
ic->ic_node_cleanup() (associd is cleared right after this call).
Tested with RTL8188EU (HOSTAP mode) and
WUSB54GC (STA mode, with powersaving enabled).
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5398
Add two new functions, sysdecode_abi_to_freebsd_errno() and
sysdecode_freebsd_to_abi_errno(), which convert errno values between
the native FreeBSD ABI and other supported ABIs. Note that the
mappings are not necessarily perfect meaning in some cases multiple
errors in one ABI might map to a single error in another ABI. In that
case, the reverse mapping will return one of the errors that maps, but
which error is non-deterministic.
Change truss to always report the raw error value to the user but
use libsysdecode to map it to a native errno value that can be used
with strerror() to generate a description. Previously truss reported
the "converted" error value. Now the user will always see the exact
error value that the application sees.
Change kdump to report the truly raw error value to the user. Previously
kdump would report the absolute value of the raw error value (so for
Linux binaries it didn't output the FreeBSD error value, but the positive
value of the Linux error). Now it reports the real (i.e. negative) error
value for Linux binaries. Also, use libsysdecode to convert the native
FreeBSD error reported in the ktrace record to the raw error used by the
ABI. This means that the Linux ABI can now be handled directly in
ktrsysret() and removes the need for linux_ktrsysret().
Reviewed by: bdrewery, kib
Helpful notes: wblock (manpage)
Differential Revision: https://reviews.freebsd.org/D5314
- Consolidate duplicate code for printing the metadata at the start of
each line into a shared function.
- Add an -H option which will log the thread ID of the relevant thread
for each event.
While here, remove some extraneous calls to clock_gettime() in
print_syscall() and print_syscall_ret(). The caller of print_syscall_ret()
always updates the current thread's "after" time before it is called.
Reviewed by: kib
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D5363
requesting the initial complete device descriptor and not as part of
the subsequent babble error recovery. Babble means that the received
USB packet was bigger than than configured maximum packet size. This
only affects enumeration of FULL speed USB devices which use a
bMaxPacketSize different from 8 bytes. This patch might help fix
enumeration of USB devices which exhibit USB I/O errors in dmesg
during boot.
MFC after: 1 week
included in loader.conf. It also fixes it so that no matter if some one incorrectly
specifies a load order, the lists and such will be initialized on demand at that
time so no one can make that mistake.
Reviewed by: hiren
Differential Revision: D5189
make sure the changes are on disk. The people at pfSense noticed that
it didn't always make it to the disk soon enough with soft updates.
Differential Revision: https://reviews.freebsd.org/D5186
Reviewed by: garga, vangyzen, bapt, se
MFC after: 1 week
IF_PREPEND promises out-of-order packet sending when the TX desc list
is depleted. It was overlooked and copied blindly when the transmission
path was partially rewritten.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5386
- Make the system call fail if prot contains bits other than read, write
and exec.
- Similar to OpenBSD's W^X, don't allow write and exec to be set at the
same time. I'd like to see for now what happens if we enforce this
policy unconditionally. If it turns out that this is far too strict,
we'll loosen this requirement.
It will be shared w/ the upcoming ifnet.if_transmit method
implementation.
No functional change.
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5385
the bus space tag and handle for a uart console, use the values returned by
that routine to set the global uart_bus_space_mem, instead of assuming that
there will be a global variable named fdtbus_bs_tag to set it from.
Also, use OF_getencprop() instead calling fdt32_to_cpu() separately.
- At Intel it is believed that most of their products support "only"
40 DMA segments so lower {EM,IGB}_MAX_SCATTER accordingly. Actually,
40 is more than plenty to handle full size TSO packets so it doesn't
make sense to further distinguish between MAC variants that really
can do 64 DMA segments. Moreover, capping at 40 DMA segments limits
the stack usage of {em,igb}_xmit() that - given the rare use of more
than these - previously hardly was justifiable, while still being
sufficient to avoid the problems seen with em(4) and EM_MAX_SCATTER
set to 32.
- In igb(4), pass the actually supported TSO parameters up the stack.
Previously, the defaults set in if_attach_internal() were applied,
i. e. a maximum of 35 TSO segments, which made supporting more than
these in the driver pointless. However, this might explain why no
problems were seen with IGB_MAX_SCATTER at 64.
- In em(4), take the 5 m_pullup(9) invocations performed by em_xmit()
in the TSO case into account when reporting TSO parameters upwards.
In the worst case, each of these calls will add another mbuf and,
thus, the requirement for an additional DMA segment. So for best
performance, it doesn't make sense to advertize a maximum of TSO
segments that typically will require defragmentation in em_xmit().
Again, this leaves enough room to handle full size TSO packets.
- Drop TSO macros from if_lem.h given that corresponding MACS don't
support TSO in the first place.
Reviewed by: erj, sbruno, jeffrey.e.pieper_intel.com
Approved by: erj
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D5238
Linux-driven changes to the way the chip's two interrupt controllers are
defined (we only support one of them) led to no interrupt processing, so
the system would hang after device instantiation. This workaround just
rewrites the FDT data on the fly to get interrupt handling back under the
control of the main GIC device.
If/when we ever support deep sleep modes that involve powering down the
main GIC, we'll have to undo this change, write a driver for the GPC-PIC,
and somehow manage the handoff of responsibilities between the two drivers
as the chip transitions in/out of deep sleep mode.
"invalid string offset 65521 >= 27261 for section `.strtab'". for object
files produced by recent versions of clang.
In BFD's elf_create_symbuf() function, the size of the symbol buffer
('ssymbuf') is not calculated correctly, and the initial value for the
'ssym' variable is off by one, since 'ssymbuf' has shndx_count + 1
members.
MFC after: 1 week
Renamed some local variables for compatibility with -Wshadow
Reported by: Andrew Turner
Tested by: ken
MFC after: 4 weeks
X-MFC-with: 295768
Sponsored by: Spectra Logic Corp
import it into the loader(8) env as dhcp.root-path, so that it overrides
any dhcp/bootp server-provided path.
Now if you have a dhcp server available you can easily net-boot a u-boot
system even if you don't control the dhcp server config, by setting just
two variables in the u-boot env:
loaderdev=net
rootpath=<nfsserverip>:<pathname>
Previously you had to either accept all the dhcp parameters from the
server without the ability to locally provide the rootpath, or you had
to forego dhcp and set more vars (ipaddr, netmask, serverip, rootpath).
Only L2 PIPT cache is supported for __ARM_ARCH >= 6.
In fact, this is just a pure proclamation as this option is used
only in armv4 specific files now.
need to include it explicitly when <vm/vm_param.h> is already included.
Suggested by: alc
Reviewed by: alc
Differential Revision: https://reviews.freebsd.org/D5379
It is only used in hv_netvsc_drv_freebsd.c; and rename it to hn_tx_done()
mainly to reserve "xmit" for ifnet.if_transmit implement.
While I'm here, remove unapplied comment.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5345
Preamble to implement the ifnet.if_transmit method.
Reviewed by: adrian
Approved by: adrian (mentor)
MFC after: 1 week
Sponsored by: Microsoft OSTC
Differential Revision: https://reviews.freebsd.org/D5344
- Add URTWN_WITHOUT_UCODE option (will disable any firmware specific code
when set).
- Do not exclude the driver from build when MK_SOURCELESS_UCODE is set
(URTWN_WITHOUT_UCODE will be enforced unconditionally).
- Do not abort initialization when firmware cannot be loaded;
behave like the URTWN_WITHOUT_UCODE option was set.
- Drop some unused variables from urtwn_softc structure.
Tested with RTL8188EU and RTL8188CUS in HOSTAP and STA modes.
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4849
