DDB when the interrupt button (aka the "programmer's switch") is pressed.
This isn't unfortunately an NMI, but it's a handy way to get into DDB
quickly if needed.
- Move the command timeout check from a separate repeating timeout to the
kthread since the kthread is already running periodically.
- Move printing the hardware print buffer to the kthread.
- Properly shut down the kernel thread on detach.
- Detach the child array devices on detach.
- Don't issue a controller halt command on detach. Doing so requires a PCI
reset to wake the controller back up. The driver can now be unloaded as
long as CAM support is not enabled.
similar patch has been in 4.x for a while, but is more hacky there.)
For this to work, vinum has to be loaded early (e. g. from
boot/loader), for obvious reasons. If the kernel env variable
(aka. loader variable) "vinum.autostart" is set, vinum then asks the
sysctl kern.disks for all available disks in the system, and scans
them for possible vinum headers.
For statically compiled kernels, this behaviour can be obtained even
without boot/loader by using "options VINUM_AUTOSTART" (though this is
not the recommended way).
Alternatively, the 4.x way to specify "vinum.drives" is also supported.
No further hacks (like the 4.x "vinum.root" variable) are needed,
since in 5.x, mountroot() asks back at the drivers to have them
resolve the name of the root FS into a dev_t (using the dev_clone
eventhandler).
(The MFC reminder below is for a partial MFC for vinum.autostart, the
rest is already there in 4.x.)
Timed out on: grog
MFC after: 2 weeks
we have the rc4 code already in the kernel (via wlan stuff or awi).
Add a dependency on the rc4 module so if it doesn't exist then load it.
Reviewed by: archie
1) It is already called in init_main.c:proc0_post()
2) It is called each time read_random_phony() called, because "initialized"
variable is never set to 1.
Approved by: markm
- Add hid.h
Obtained from: NetBSD
NOTE: This undoes some changes I'd made to prefix the processor name defines
with PVR_. This was due to my original decision to use MPC750 as a cpu name.
With this changed, the PVR_ change is no longer required.
Remove all the stuff that does not relate to the TSC.
Change the calibration to use DELAY(1000000) rather than trying to check
it against the CMOS RTC, this drastically increases precision:
Using 25 samples on a Athlon 700MHz UP machine I find:
stddev min max average
CMOS 22200 Hz -74980 Hz 34301 Hz 704928721 Hz
DELAY 1805 Hz -1984 Hz 2678 Hz 704937583 Hz
(The difference between the two averages is not statistically significant.)
expressed in PPM of the frequency:
stddev min max
CMOS 31.49 PPM -106.37 PPM 48.66 PPM
DELAY 2.56 PPM 2.81 PPM 3.80 PPM
This code will not be used until a followup commit to sys/isa/clock.c
and sys/pc98/pc98/clock.c which will only happen after some field testing.
MAC policy. To load a KLD, require that the subject hold Biba privilege,
and the the kernel module be marked as high integrity. To unload a
KLD, require that the subject hold Biba privilege.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
and MLS policies: as we support both an effective (single) element and
range (available) elements, require that the single be in the range if
both the single and range are defined in the update. Remove comments
suggesting that such a check might be a good idea.
Don't introduce a similar check for network interfaces; due to different
interpretations of the single and range elements, it's not clear that
it's useful to do so.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
labeling for Biba.
Rename the variable 'level' to 'type' in interface parsing and
labeling for MLS.
Obtained from: TrustedBSD Project
Sponsored by: DARPA, Network Associates Laboratories
uio segment is empty. In this case no dma segment is create by
bus_dmamap_load_buffer, but the calling routine clears the first flag.
Under certain combinations of addresses of the first and second mbuf/uio
buffer this leads to corrupted DMA segment descriptors. This was already
fixed by tmm in sparc64/sparc64/iommu.c.
PR: kern/47733
Reviewed by: sam
Approved by: jake (mentor)
