Commit Graph

1345 Commits

Author SHA1 Message Date
joerg
71ff47645a Fixed the problem where the floppy has incorrectly failed probing
when the drive had been left on a cylinder > 67 after kernel boot. The
most common case for this is booting a kernel that is located on
the inner cylinders of a floppy.

Also removed all occurences of spinwait(), replaced by DELAY.
Nuked a return line saying nothing, this might make Bruce happy 8^)

Submitted by:	partially by Bruce Evans
1994-09-17 18:08:36 +00:00
dg
0285e6bafc Updated driver to the 1.1.5 version:
date: 1994/05/22 12:35:38;  author: joerg;  state: Exp;  lines: +6 -6
First round of floppy changes. Try making `fd' more robust.

New features:
  .  ioctl command for setting the drive type (density etc.); restricted
     to the super-user
  .  ioctl for getting/seting `drive options'; currently only option
     is FDOPT_NORETRY: inhibit the usual retries; used when verifying
     a newly formatted track

Fixes:
  .  function prototypes
  .  made all internal functions `static'
  .  cleaned up & corrected .h files
  .  restructured, to make the chaotic function sequence more rational
  .  compiled with -Wall, and cleared all warnings
  .  introduced a mirror for the (write-only) `digital output register',
     to avoid the current kludge
  .  device probing completed by seeking/recalibrating, and looking
     for track 0 being found
  .  holding the controller down in reset state while it is idle (and
     thus saving allot of headaches)
  .  make requests fail that are not a multiple of the (physical)
     sector size
  .  removed the fixed physical sector size (512 bytes), allowing for any
     size the controller could handle (128/256/512/1024 bytes)
  .  replaced some silly messages
  .  fixed the TRACE* macro usage, debugging reports should be complete
     now again (debugging output is HUGE! though)
  .  removed fd_timeout for SEEK command; seeks are always reported by
     the controller to succeed, since the `success' only refers to the
     controller's idea of success - there is no hardware line to tell about
     the seek end (other than the `track 0' line)
  .  catch SENSEI's that report about a `terminated due to READY changed'
     status - could happen after a controller reset
  .  converted ``hz / <something>'' divide operations to divisors that are
     powers of two, so gcc can optimize them into shifts
  .  write/format operations are checked against a write-protected medium
     now *prior* starting the operation
  .  error reports of `invalid command' and `wrong cylinder' will cause
     shortcuts in the retrier() now
  .  fixed a bug in the retrier() causing bogus block numbers to be reported
  .  fdformat() does care for errors now

Known Bugs:
  .  no attempts have been made (yet) to improve the performance
  .  sometimes, bogus ``seek/recalib failed'' messages are logged; this
     is still a bug in the driver, but it's not harmful since it's
     usually caught by the retrier()

Reviewed by:
Submitted by:
Obtained from:
1994-09-17 16:56:10 +00:00
sos
b4e024b1fb Added support for many more videomodes, including graphic modes up til
320x200 256col VGA. This is nessesary for the iBCS stuff to work right.
(And we get the benefit of more video modes). Uses the videocard BIOS
to optain mode tables.
Added a "green" saver, switches off the syncs for "green" monitors.

Reviewed by:
Submitted by:
Obtained from:
1994-09-15 07:26:40 +00:00
ache
d872167657 1. adjkerntz variable added for preparation to resettodr() implementation
2. Leap year calculations fixed
1994-09-14 23:09:06 +00:00
phk
52a89a0c57 Digicom Systems Inc, makes "softmodems". What this means is simply that
you download the microcode to the DSP everytime you power on your system.
They provide a dos-program to do so, but no other support.  This commit adds
code to the sio-driver, which implement an ioctl, which will down-load the
micro-code.

To get this functionality, you must define DSI_SOFT_MODEM.

The program to actually employ the ioctl is not included, but the entire
source looks like this:

        #include <sys/ioctl.h>
        #include <stdio.h>

        main()
        {
                unsigned char buffer[100000];
                int i;

                read(0,buffer,100000);
                if((i = ioctl(1,TIOCDSIMICROCODE,buffer)) < 0)
                    perror("ioctl");
                return i;
        }

And you use it like this:
	smload < data144b.dsi > /dev/ttyid3

You need to copy the *.DSI files from the dos-media provide with your modem.
You can see what is downloaded by issuing the ATI3 command to the modem.
DSI's scheme for what code you can run on your modem isn't violated by this.

Poul-Henning Kamp
phk@freefall.cdrom.com
1994-09-13 03:30:31 +00:00
ache
49d6dcaa6d Use RAW_PART=2 to trick diskerr 1994-08-29 21:32:31 +00:00
dg
4d4250da00 1) Changed ddb into a option rather than a pseudo-device (use options DDB
in your kernel config now).
2) Added ps ddb function from 1.1.5. Cleaned it up a bit and moved into its
   own file.
3) Added \r handing in db_printf.
4) Added missing memory usage stats to statclock().
5) Added dummy function to pseudo_set so it will be emitted if there
   are no other pseudo declarations.
1994-08-27 16:14:39 +00:00
bde
532c1f6717 Updated to final 1.1.5 version (revision 1.56).
Merged changes from 2.0 version (revisions 1.46-1.50) by hand.

Finished conversion to clists: removed flush of tty output buffer
in comflush() (most writes were truncated to 256 bytes) and restored
bypass of ttyinput() in siopoll().

Finished conversion to 2.0 types - more void *'s, less caddr_t's,
less casts, no Dev_t's.

Only these things are seriously broken now compared with 1.1.5:
waiting for output complete is impossible so ttywait() can deadlock;
sioclose() isn't called enough so sioopen() sometimes returns EBUSY
unnecessarily; input flow control is not implemented.
1994-08-25 10:15:28 +00:00
paul
0263782ac9 Ran ft.c through ident.
Added a missing #ifdef INET wrapper in lpt.c

Main change:
	Removed the timeout_func_t casts from timeout calls and
	correctly defined the timeout routines to conform to
	the new format.
lpt.c doesn't have this change.

Reviewed by:
Submitted by:
1994-08-23 07:52:29 +00:00
dg
c97639b923 1) cleaned up after Garrett - fixed more redundant declarations, changed
use of timeout_t -> timeout_func_t in aha1542 and aha1742 drivers.
2) fix a bug in the portalfs that was uncovered by better prototyping -
   specifically, the time must be converted from timeval to timespec
   before storing in va_atime.
3) fixed/added some miscellaneous prototypes
1994-08-20 03:49:02 +00:00
wollman
f9fc827448 Fix up some sloppy coding practices:
- Delete redundant declarations.
- Add -Wredundant-declarations to Makefile.i386 so they don't come back.
- Delete sloppy COMMON-style declarations of uninitialized data in
  header files.
- Add a few prototypes.
- Clean up warnings resulting from the above.

NB: ioconf.c will still generate a redundant-declaration warning, which
is unavoidable unless somebody volunteers to make `config' smarter.
1994-08-18 22:36:09 +00:00
dg
7b3218c89f Bruce Evans' dynamic interrupt support.
/usr/src/sys/i386/isa/clock.c:
	o Garrett's statclock changes.
	o Wire xxxintr, not Vclk.
	o Wire using register_intr(), not setidt().

/usr/src/sys/i386/isa/icu.s:
	o Garrett's statclock changes.
	o Removed unused variable high_imask.
	o Fake int 8 for rtc as well as int 0 for clk.  Required for kernel
	  profiling with statclock, harmless otherwise.

/usr/src/sys/i386/isa/isa.c:
	o Allow isdp->id_irq and other things in *isdp to be changed by
	  probes.  Changing interrupts later requires direct calls to
	  register_intr() and unregister_intr() and more care.
	  ALLOW_CONFLICT_* is brought over from 1.1.5, except
	  ALLOW_CONFLICT_IRQ is not supported.  IRQ conflict checking is
	  delayed until after probing so that drivers can change the IRQ
	  to a free one; real conflicts require more cooperation between
	  drivers to handle.
	o Too many details to list.
	o This file requires splitting and a lot more work.

/usr/src/sys/i386/isa/isa_device.h:
	o Declare more things more completely.

/usr/src/sys/i386/isa/sio.c:
	o Prepare to register interrupt handlers as fast.

/usr/src/sys/i386/isa/vector.s:
	o Generate entry code for 16 fast interrupt handlers and 16 normal
	  interrupt handlers.  Changed some constants to variables:
	  # $unit is now intr_unit[intr].  Type is int.  Someday it should
	    be a cookie suitable for the handler (e.g., a struct com_s for
	    sio).
	  # $handler is now intr_handler[intr].
	  # intrcnt_actv[id_num] is now *intr_countp[intr].  The indirection
	    is required to get a contiguous range of counters for vmstat
	    and so that the drivers depend more in the driver than on the
	    interrupt number (drivers could take turns using an interrupt
	    and the counts would remain correct).  There is a separate
	    counter for each device and for each stray interrupt.  In
	    1.1.5, stray interrupt 7 clobbers the count for device 7 or
	    something worse if there is no device 7 :-(.
	  # mask is now intr_mask[intr] (was already indirect).
	 o Entry points are now _XintrI and _XfastintrI (I = intr = 0-15),
	   not _VdevU (U = unit).
	 o Removed BUILD_VECTORS stuff.  There's a trace of it left for
	   the string table for vmstat but config now generates the
	   string in one piece because nothing more is required.
	 o Removed old handling of stray interrupts and older comments
	   about it.

Submitted by:	 Bruce Evans
1994-08-18 05:09:36 +00:00
sos
d4c1e31c0f Oops, changed order of include lines...
Reviewed by:
Submitted by:
1994-08-17 19:32:23 +00:00
sos
778497d080 Updated to latest 1.1.5.1+ version
Reviewed by:
Submitted by:
1994-08-17 08:51:59 +00:00
wollman
d7a33d9622 Add option KBD_RESET_FAIL_OK so that GCC 2.6 doesn't break my
console.
1994-08-15 22:41:33 +00:00
wollman
d1747d9934 Enable use of the RTC chip for the statistical clock. While this does
not provide the full accuracy of a randomized statistical clock, it does
provide greater accuracy than the previous method, while not significantly
increasing overhead.  It also provides profiling support at 1024 Hz.

You must re-compile config before making a new kernel, or you will end
up with unresolved symbols.

Reviewed uy:	Bruce evans said it worked for him.
1994-08-15 03:15:20 +00:00
wollman
07e1c7f69d Change all #includes to follow the current Berkeley style. Some of these
``changes'' are actually not changes at all, but CVS sometimes has trouble
telling the difference.

This also includes support for second-directory compiles.  This is not
quite complete yet, as `config' doesn't yet do the right thing.  You can
still make it work trivially, however, by doing the following:

rm /sys/compile
mkdir /usr/obj/sys/compile
ln -s M-. /sys/compile
cd /sys/i386/conf
config MYKERNEL
cd ../../compile/MYKERNEL
ln -s /sys @
rm machine
ln -s @/i386/include machine
make depend
make
1994-08-13 03:50:34 +00:00
wollman
af8613405f For Pentium machines, use a faster version of microtime with 8 usec
resolution (can probably be improved somewhat).  Other machines take
a three-instruction hit if I586_CPU is defined, none otherwise.
1994-08-11 00:28:24 +00:00
wollman
ad6af289bc Tell Pentium users their CPU speed. (More changes to make use of this
to come later.)
1994-08-10 23:28:33 +00:00
dg
8b75418fcc Fixed a bug that was introduced in the conversion from 1.1.5 to 2.0. 1994-08-01 10:38:19 +00:00
rgrimes
163f74d6f0 Since we have removed com.c and renamed comreg.h to sioreg.h I need to
fix sio.c to #include sioreg.h.
1994-05-26 13:31:40 +00:00
rgrimes
2469c867a1 The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch.
Reviewed by:	Rodney W. Grimes
Submitted by:	John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
sos
72047e7987 Update the reprogram timer stuff, now the frequency of timer 0
can only be changed at the "right" times. Accuracy should be
assured.
1994-05-02 09:41:24 +00:00
sos
9fd71f3fa9 Updated swedish keymap. 1994-04-26 09:24:06 +00:00
sos
90387385b1 Fixed missing bounds check in scroll up/down sequence, that could
cause a panic (and did).
1994-04-26 09:09:57 +00:00
wollman
7745e6da4c Define new option, INACCURATE_MICROTIME_IS_OK. When this is defined,
the NTP kernel PLL is disabled, and acquire_timer0() is enabled, thus
opening the door for microtime() (and hence gettimeofday()) to return
bogus timestamps.  This option is necessary for the `pca' driver to
work, but is implemented to underscore the fact that accurate timekeeping
and the `pca' driver are incompatible at present.  If someone writes a version
of microtime() that works when the `pca' driver is being used, this can get
junked.
1994-04-23 21:39:18 +00:00
dg
3c6dc6acde Added support for the 16 port Boca via a flag to specify that there is
no master port.
1994-04-23 02:11:43 +00:00
sos
09a968ec10 Changed timer usage to new functions in clock.c 1994-04-21 14:22:26 +00:00
sos
a02f0d6fd9 New support for sharing the timers
acquire_timer / release_timer

Pulled in timer related functions from isa.c
1994-04-21 14:19:16 +00:00
dg
239ae571f1 Bug fixes and performance improvements from John Dyson and myself:
1) check va before clearing the page clean flag. Not doing so was
	causing the vnode pager error 5 messages when paging from
	NFS. (pmap.c)
2) put back interrupt protection in idle_loop. Bruce didn't think
	it was necessary, John insists that it is (and I agree). (swtch.s)
3) various improvements to the clustering code (vm_machdep.c). It's
	now enabled/used by default.
4) bad disk blocks are now handled properly when doing clustered IOs.
	(wd.c, vm_machdep.c)
5) bogus bad block handling fixed in wd.c.
6) algorithm improvements to the pageout/pagescan daemons. It's amazing
	how well 4MB machines work now.
1994-04-20 07:06:57 +00:00
ache
d0078dd4ff Patch from S0ren, 80x50 font trashed after switching from X console 1994-04-12 00:05:23 +00:00
ache
50c9f98382 Fix arguments of CONS_GETINFO 1994-04-07 23:23:01 +00:00
ache
7f6867dd0f Add declaration missing from previous bde's version 1994-04-03 12:25:57 +00:00
ache
cf1e229f66 CHANGES from Bruce:
---
This list of changes is in approximately chronological order (oldest first).

	o Many cosmetic changes - renamed comintr1 -> siointr1, moved
	  things around and fixed whitespace.
	o Reduced SLIP latency (FRAME_END hack) from 20-30 ms to 16 ms
	  at 115200 bps (you won't notice the average 10 ms improvement
	  on slow lines).  ppp seems to use only counted transfers so
	  there's no similar hack available.  It's too hard for the
	  driver to know the count.
	o Temporary #ifdefs for new and old interrupt handling
	  (OLD_INTERRUPT_HANDLING decided by setsofttty() not being
	  externally defined.
	o Don't test for the IIR_NOPEND bit being set - test for the
	  non-fifo part of the iir equalling it like the docs say to.
	  States with other IIR_NOPEND set in combination with the
	  other iir bits are undefined.  The docs may be stupid - the
	  old test would not have broken when the fifo bits were
	  introduced.
	o Noted more problems with DTR wait.
	o Rewrote console stuff.  Still some initialization and state
	  preservation problems.  Same for kgdb stuff.  The driver
	  doesn't do anything about the console close bug.  It needs
	  to be fixed entirely in i386/cons.c.  I like chmr's version
	  where the the console driver revectors the device open and
	  close routines.
	o Temporary (?) #ifdefs for references to tty buffers.
	o Noted further things to do in (2 comments about 3 places) for
	  phk's change to not touch RTS unless it is being used for flow
	  control.
	o Temporary #ifdefs for timestamp handling.  It needs fixing.
	  The microtime() call breaks the first rule of writing fast
	  interrupt handlers: NO calls to functions that might do slow
	  and bad things.  microtime() enables interrupts.  This turns
	  out to be only moderately harmful.  Also, I want the timestamp
	  copy outside of the normal interrupt handler.
	o Don't init com->tp early for the !DONT_MALLOC_TTYS case -
	  both sides are NULL.
	o Worry about com->tp == NULL in siopoll.  I don't see how you
	  survived the (incc <= 0 || !(tp->state & TS_ISOPEN)) test.
	  Perhaps early sttys or comcontrols set up the tp's for _all_
	  the ports before this code is reached.
1994-04-03 11:41:11 +00:00
dg
5717a39a7a New interrupt code from Bruce Evans. In additional to Bruce's attached
list of changes, I've made the following additional changes:

1) i386/include/ipl.h renamed to spl.h as the name conflicts with the
   file of the same name in i386/isa/ipl.h.
2) changed all use of *mask (i.e. netmask, biomask, ttymask, etc) to
   *_imask (net_imask, etc).
3) changed vestige of splnet use in if_is to splimp.
4) got rid of "impmask" completely (Bruce had gotten rid of netmask),
   and are now using net_imask instead.
5) dozens of minor cruft to glue in Bruce's changes.

   These require changes I made to config(8) as well, and thus it must
be rebuilt.

-DG

from Bruce Evans:

sio:
	o No diff is supplied.  Remove the define of setsofttty().  I hope
	  that is enough.

*.s:
	o i386/isa/debug.h no longer exists.  The event counters became too
	  much trouble to maintain.  All function call entry and exception
	  entry counters can be recovered by using profiling kernel (the new
	  profiling supports all entry points; however, it is too slow to
	  leave enabled all the time; it also).  Only BDBTRAP() from debug.h
	  is now used.  That is moved to exception.s.  It might be worth
	  preserving SHOW_BITS() and calling it from _mcount() (if enabled).
	o T_ASTFLT is now only set just before calling trap().
	o All exception handlers set SWI_AST_MASK in cpl as soon as possible
	  after entry and arrange for _doreti to restore it atomically with
	  exiting.  It is not possible to set it atomically with entering
	  the kernel, so it must be checked against the user mode bits in
	  the trap frame before committing to using it.  There is no place
	  to store the old value of cpl for syscalls or traps, so there are
	  some complications restoring it.

Profiling stuff (mostly in *.s):
	o Changes to kern/subr_mcount.c, gcc and gprof are not supplied yet.
	o All interesting labels `foo' are renamed `_foo' and all
	  uninteresting labels `_bar' are renamed `bar'.  A small change
	  to gprof allows ignoring labels not starting with underscores.
	o MCOUNT_LABEL() is to provide names for counters for times spent
	  in exception handlers.
	o FAKE_MCOUNT() is a version of MCOUNT() suitable for exception
	  handlers.  Its arg is the pc where the exception occurred.  The
	  new mcount() pretends that this was a call from that pc to a
	  suitable MCOUNT_LABEL().
	o MEXITCOUNT is to turn off any timer started by MCOUNT().

/usr/src/sys/i386/i386/exception.s:
	o The non-BDB BPTTRAP() macros were doing a sti even when interrupts
	  were disabled when the trap occurred.  The sti (fixed) sti is
	  actually a no-op unless you have my changes to machdep.c that make
	  the debugger trap gates interrupt gates, but fixing that would
	  make the ifdefs messier.  ddb seems to be unharmed by both
	  interrupts always disabled and always enabled (I had the branch in
	  the fix back to front for some time :-().
	o There is no known pushal bug.
	o tf_err can be left as garbage for syscalls.

/usr/src/sys/i386/i386/locore.s:
	o Fix and update BDE_DEBUGGER support.
	o ENTRY(btext) before initialization was dangerous.
	o Warm boot shot was longer than intended.

/usr/src/sys/i386/i386/machdep.c:
	o DON'T APPLY ALL OF THIS DIFF.  It's what I'm using, but may require
	  other changes.
	  Use the following:
		o Remove aston() and setsoftclock().
	  Maybe use the following:
		o No netisr.h.
		o Spelling fix.
		o Delay to read the Rebooting message.
		o Fix for vm system unmapping a reduced area of memory
		  after bounds_check_with_label() reduces the size of
		  a physical i/o for a partition boundary.  A similar
		  fix is required in kern_physio.c.
		o Correct use of __CONCAT.  It never worked here for non-
		  ANSI cpp's.  Is it time to drop support for non-ANSI?
		o gdt_segs init.  0xffffffffUL is bogus because ssd_limit
		  is not 32 bits.  The replacement may have the same
		  value :-), but is more natural.
		o physmem was one page too low.  Confusing variable names.
	  Don't use the following:
		o Better numbers of buffers.  Each 8K page requires up to
		  16 buffer headers.  On my system, this results in 5576
		  buffers containing [up to] 2854912 bytes of memory.
		  The usual allocation of about 384 buffers only holds
		  192K of disk if you use it on an fs with a block size
		  of 512.
		o gdt changes for bdb.
		o *TGT -> *IDT changes for bdb.
		o #ifdefed changes for bdb.

/usr/src/sys/i386/i386/microtime.s:
	o Use the correct asm macros.  I think asm.h was copied from Mach
	  just for microtime and isn't used now.  It certainly doesn't
	  belong in <sys>.  Various macros are also duplicated in
	  sys/i386/boot.h and libc/i386/*.h.
	o Don't switch to and from the IRR; it is guaranteed to be selected
	  (default after ICU init and explicitly selected in isa.c too, and
	  never changed until the old microtime clobbered it).

/usr/src/sys/i386/i386/support.s:
	o Non-essential changes (none related to spls or profiling).
	o Removed slow loads of %gs again.  The LDT support may require
	  not relying on %gs, but loading it is not the way to fix it!
	  Some places (copyin ...) forgot to load it.  Loading it clobbers
	  the user %gs.  trap() still loads it after certain types of
	  faults so that fuword() etc can rely on it without loading it
	  explicitly.  Exception handlers don't restore it.  If we want
	  to preserve the user %gs, then the fastest method is to not
	  touch it except for context switches.  Comparing with
	  VM_MAXUSER_ADDRESS and branching takes only 2 or 4 cycles on
	  a 486, while loading %gs takes 9 cycles and using it takes
	  another.
	o Fixed a signed branch to unsigned.

/usr/src/sys/i386/i386/swtch.s:
	o Move spl0() outside of idle loop.
	o Remove cli/sti from idle loop.  sw1 does a cli, and in the
	  unlikely event of an interrupt occurring and whichqs becoming
	  zero, sw1 will just jump back to _idle.
	o There's no spl0() function in asm any more, so use splz().
	o swtch() doesn't need to be superaligned, at least with the
	  new mcounting.
	o Fixed a signed branch to unsigned.
	o Removed astoff().

/usr/src/sys/i386/i386/trap.c:
	o The decentralized extern decls were inconsistent, of course.
	o Fixed typo MATH_EMULTATE in comments. */
	o Removed unused variables.
	o Old netmask is now impmask; print it instead.  Perhaps we
	  should print some of the new masks.
	o BTW, trap() should not print anything for normal debugger
	  traps.

/usr/src/sys/i386/include/asmacros.h:
	o DON'T APPLY ALL OF THIS DIFF.  Just use some of the null macros
	  as necessary.

/usr/src/sys/i386/include/cpu.h:
	o CLKF_BASEPRI() changes since cpl == SWI_AST_MASK is now normal
	  while the kernel is running.
	o Don't use var++ to set boolean variables.  It fails after a mere
	  4G times :-) and is slower than storing a constant on [3-4]86s.

/usr/src/sys/i386/include/cpufunc.h:
	o DON'T APPLY ALL OF THIS DIFF.  You need mainly the include of
	  <machine/ipl.h>.  Unfortunately, <machine/ipl.h> is needed by
	  almost everything for the inlines.

/usr/src/sys/i386/include/ipl.h:
	o New file.  Defines spl inlines and SWI macros and declares most
	  variables related to hard and soft interrupt masks.

/usr/src/sys/i386/isa/icu.h:
	o Moved definitions to <machine/ipl.h>

/usr/src/sys/i386/isa/icu.s:
	o Software interrupts (SWIs) and delayed hardware interrupts (HWIs)
	  are now handled uniformally, and dispatching them from splx() is
	  more like dispatching them from _doreti.  The dispatcher is
	  essentially *(handler[ffs(ipending & ~cpl)]().
	o More care (not quite enough) is taken to avoid unbounded nesting
	  of interrupts.
	o The interface to softclock() is changed so that a trap frame is
	  not required.
	o Fast interrupt handlers are now handled more uniformally.
	  Configuration is still too early (new handlers would require
	  bits in <machine/ipl.h> and functions to vector.s).
	o splnnn() and splx() are no longer here; they are inline functions
	  (could be macros for other compilers).  splz() is the nontrivial
	  part of the old splx().

/usr/src/sys/i386/isa/ipl.h
	o New file.  Supposed to have only bus-dependent stuff.  Perhaps
	  the h/w masks should be declared here.

/usr/src/sys/i386/isa/isa.c:
	o DON'T APPLY ALL OF THIS DIFF.  You need only things involving
	  *mask and *MASK and comments about them.  netmask is now a pure
	  software mask.  It works like the softclock mask.

/usr/src/sys/i386/isa/vector.s:
	o Reorganize AUTO_EOI* macros.
	o Option FAST_INTR_HANDLER_USERS_ES for people who don't trust
	  fastintr handlers.
	o fastintr handlers need to metamorphose into ordinary interrupt
	  handlers if their SWI bit has become set.  Previously, sio had
	  unintended latency for handling output completions and input
	  of SLIP framing characters because this was not done.

/usr/src/sys/net/netisr.h:
	o The machine-dependent stuff is now imported from <machine/ipl.h>.

/usr/src/sys/sys/systm.h
	o DON'T APPLY ALL OF THIS DIFF.  You need mainly the different
	  splx() prototype.  The spl*() prototypes are duplicated as
	  inlines in <machine/ipl.h> but they need to be duplicated here
	  in case there are no inlines.  I sent systm.h and cpufunc.h
	  to Garrett.  We agree that spl0 should be replaced by splnone
	  and not the other way around like I've done.

/usr/src/sys/kern/kern_clock.c
	o splsoftclock() now lowers cpl so the direct call to softclock()
	  works as intended.
	o softclock() interface changed to avoid passing the whole frame
	  (some machines may need another change for profile_tick()).
	o profiling renamed _profiling to avoid ANSI namespace pollution.
	  (I had to improve the mcount() interface and may as well fix it.)
	  The GUPROF variant doesn't actually reference profiling here,
	  but the 'U' in GUPROF should mean to select the microtimer
	  mcount() and not change the interface.
1994-04-02 07:00:53 +00:00
ache
ebb3d9b98b Replace CAPS led with ALTGR led for ALTGR mode (soft) keyboards,
currently affects only russian keyboard.
1994-04-01 18:33:12 +00:00
ache
0e71fc7432 Change got_status/modem_status assignment per Bruce suggestion,
because inb clears modem status port.
1994-04-01 16:47:01 +00:00
ache
e517f29ec8 1) Better fix for false carrier detect on bidir port
2) ttyclose moved after comhardclose, because clears t_state
3) slpx(s) moved after l_open to prevent undetected carrier down
1994-03-26 13:40:18 +00:00
ache
875d89b28a Fix false carrier detection on incoming bidir port. 1994-03-25 15:10:50 +00:00
ache
9951f4331e 1) Change dtrwait 300 to 3 * hz (to be more kosher)
2) Protect sioclose by spltty()
1994-03-23 17:28:35 +00:00
ache
ee1a0d60c4 Add siostop to sioclose, because ttyflush called from
wrong places removed now.
1994-03-21 22:19:56 +00:00
ache
8700da94fc Increase default DTR wait time up to 3 secs.
Also hardw. specs says 2.5 secs is enough, many modems needs
at least 3 secs.
1994-03-21 15:18:27 +00:00
dg
36a8b9e9a1 previous optimization from John wasn't quite ready for primetime. 1994-03-21 06:37:04 +00:00
dg
ec62ad7189 Two fixes from John Dyson to fix hangs and panics when using ctrl-T:
1) tty.c: gather all the info about the processes before calling ttyprintf
	(which may block).
2) syscons.c: handle asynchronous output properly (data structures may
	be corrupted otherwise).
1994-03-20 20:05:55 +00:00
ache
2ca9eed233 Remove ttyfree from sioclose
Example:
Application use port cua01
Getty open ttyd1 (allocates rawq,outq,etc) and waits while application
done
Application quits, sioclose issued, ttyfree issued (getty calls revoke)
Getty awakes and goes to panic into initrb (NULL rawq)
1994-03-18 23:35:37 +00:00
ache
6b284802a2 Checking l_close in unneeded (one of my previous fixes),
so back it out.
1994-03-14 18:52:14 +00:00
ache
950f869b27 Don't call ttyclose twice into sioclose and move ttyclose
before comhardclose
1994-03-10 10:06:27 +00:00
ache
d533737466 First open:
now HUPCL set only in bidir case for callin lines
(this prevents set HUPCL on mouse)
comhardclose:
in addition to HUPCL case now DTR dropped for bidir case
if line was active in and no carrier present now.
(this prevents DTR sleep on mouse)
1994-03-08 22:11:10 +00:00
nate
f93c7d6114 From: Jim Babb <babb@sedhps01.mdc.com>
Subject: Re: Bugs with floppy drives
Date: Tue, 8 Mar 94 9:11:54 CST

The transfer speed was only set in the retry after error, not  when
switching drives.
1994-03-08 16:25:29 +00:00
dg
e0707add54 Modified pccnprobe to not set cn_tp = CONSOLE_TTY if __FreeBSD__ is
defined. This code should probably be yanked out.
1994-03-08 15:17:41 +00:00
guido
326bf873bf Removed a #warning that I left here. 1994-03-06 20:56:26 +00:00
guido
5a4f090496 Ttys structures are now allocated dynamically via ttymalloc/ttyfree.
This inetrface should be used from now on.
pseudo device pty xx still keeps its meaning: a maximum of
xx ptys is allowed.
A ringbuffer is now 2040 bytes long, per Garrett Wollman's request.
The changes are inspired by the way NetBSD did it (thanks for that!),
though I made it slihghtly different, including the interface so
at least 75% of the allocated space is deallocated when the tty is
closed.
Note further that it is easy to modify the ringbuffer length runtime.
This will have to wait untill some later date...


-Guido
1994-03-02 20:28:38 +00:00
ache
69ce570a0d 360 DD entry speed fixed to 250KBPS 1994-03-02 18:34:41 +00:00
alm
4e614f6299 floppy tape support shouldn't interfere with floppy disk driver on
systems with no floppy tape drive (patch from Jim Babb).
1994-03-02 08:10:42 +00:00
phk
70c6a315ee RTS shouldn't be touched unless CS_RTS_IFLOW is set. 1994-02-26 00:04:03 +00:00
phk
e59d3e9c7f TIOCTIMESTAMP capability. The port in question must be configured with
"vector siointrts".  Thus only a compare is added for the other ports.
1994-02-24 16:39:48 +00:00
nate
eed2243f2e From: Jim Babb <babb@sedhps01.mdc.com>
Date: Mon, 14 Feb 94 15:57:14 CST

This adds a copyright to the fdc.h file and fixes a bug in re-tries
during writes on a heavily loaded system.
1994-02-14 22:24:28 +00:00
alm
4c1e7c072c Tentative fdc patches... 1994-02-07 22:12:45 +00:00
ache
60fda7adb1 Change all siointr (expect in Vsio, of course) to comintr1
This saves two commands per each direct comintr1 call,
allows some strict check in siointr and also
fix bug with suspended output on multiport cards
1994-02-07 18:37:21 +00:00
alm
0e4e4906a6 Add floppy tape driver - fd => fdc 1994-02-07 04:27:13 +00:00
dg
4b7235d634 From: Chris Wiener <cwiener@CRLABS.COM>
When the keyboard is probed, the LED's blink quickly and
"Keyboard reset failed" is printed on the console.  The
init routine keeps trying endlessly with the same behavior
as above.

I got the latest -current sup sources (06-Feb-94 12:00 GMT) to work using the
old syscons.c.  The following patch makes the new syscons work:
1994-02-07 02:14:27 +00:00
dg
9e053b094d At the suggestion of Bruce Evans, don't zero RTC diag register. Doing so
was causing problems for some machines.
1994-02-06 22:48:13 +00:00
ache
4194a396a1 1) Proper fix for suspended output in multiport case
2) IIR_NOPEND is really *one* bit, we don't need to check whole MASK
1994-02-06 11:59:35 +00:00
chmr
7ce1384095 Make the screen savers runtime switchable. Everybody wants a
different default saver, and the size increase in the kernel is
minimal ( < 2.5K ).
1994-02-04 10:36:15 +00:00
ache
1e80a7b9b2 Make BLANK_SAVER default to stop best saver war. 1994-02-02 23:10:55 +00:00
ache
e844cf9bb7 Fix error in multiport part:
while input char not entered, output was suspended
1994-02-02 16:41:26 +00:00
nate
80bd0bbd20 Moved paren in sgetc to where it belongs. (My fault, I must have wiped it
out when I applied the patch to get the new features by hand)
1994-02-01 19:04:18 +00:00
rich
dc70dc2487 Add missing arg to Debugger() call.
Add missing close paren in sgetc() definition.
1994-02-01 15:09:10 +00:00
ache
2d4503f95a Make old SNAKE_SAVER code compile with new syscons changes. 1994-02-01 11:13:49 +00:00
ache
f8b3996fff 1) Restore removed SNAKE_SAVER (Nate, WHY you do it?)
2) Make SNAKE_SAVER like default, if no saver specified in "options"
3) Remove #ifdef STAR_SAVER  before line /* make screensaver happy */
this code needed in any case.
1994-02-01 10:43:02 +00:00
ache
3063c799df Russian keymap is broken after last commit (fixed)
Nate, please, be more careful next time.
1994-02-01 09:27:43 +00:00
ache
a543d59714 Comment #define STAR_SAVER, it is configuration "options" 1994-02-01 08:30:45 +00:00
nate
92c2d844b2 From: sos@login.dkuug.dk (S|ren Schmidt)
Subject: syscons-1.3
Date: Sat, 29 Jan 94 23:33:50 MET

But here is the (hopefully) final syscons-1.3....

....

I've changed sgetc so it works as the pccons parallel
(it now uses a scgetc internally).


[
There were a couple changes that Bruce Evans sent me that were applied
to this version along with some changes that S'ren didn't incorporate
into the final version.  There will be only minor changes if anything
from this version to his final release.
]
1994-02-01 06:22:29 +00:00
ache
060fb0cded Remove CALLOUTMASK, if non-bidir case. 1994-01-31 19:07:59 +00:00
ache
805b2d4d90 1) Set ipending back to 4, because (16 + 4) bit not in
netmask or impmask.

2) Fixes from Bruce:
	o Changed name of schedsoftcom() to setsofttty() to match
	  setsoftclock()
	o Bool_t isn't used.
	o tx_fifo_size is 1 for chips without fifos, 16 for 16550's, to
	  help to output more efficiently for 16550's (LSR_TXRDY means
	  that the fifo is empty, not that it has space for one char).
	o Changed name of softsio1() to siopoll() and merged compoll()
	  into siopoll().
	o The probe forgot to clear com_mcr after it failed.  This is
	  harmful for 4 single serial ports on 2 interrupts.  It makes
	  partial misconfigurations worse.
	o Don't bother initializing static variables that are 0 (bidir
	  stuff).
	o Only initialize t_oflag to TTYDEF_OFLAG if unit == COMCONSOLE,
	  not if COMCONSOLE is defined.
	o Don't call siointr() from comparam() if there is no output in
	  progress.  For the call from sioopen(), there's no output in
	  progress, and siointr() often saw silo overflows for stale
	  input because it was called before sioopen() discarded the
	  input.
	o Let ttselect() do the work for select(), so that the fixes for
	  ttselect() don't have to be duplicated in zillions of drivers.
1994-01-31 08:52:12 +00:00
dg
4aadf8a7c8 Patch from Brian Smith (modified a little by me) to allow kernel config
file override to disable fifo on 16550s:

I bought a board with two 16550's, but one of those ports has a mouse
on it.  The sio driver always enables the fifo, which is a bad thing
for mice and X.  The mouse is jerky and hard to use.  The simple thing
is be to treat one of the ports as a non-fifo'ed UART, and I use the
flags option in my config file.

So, my config file has:
device      sio0    at isa? port "IO_COM1" tty irq 4 flags 0x2 vector siointr
device      sio1    at isa? port "IO_COM2" tty irq 3 vector siointr

(patch deleted)
1994-01-31 06:12:18 +00:00
ache
99c862546e Add Ctrl-Altr-Esc DBG key to RUKEYMAP (russian keymap) 1994-01-24 05:22:27 +00:00
nate
8ea66e818e Changed the default 'reboot' routine from cpu_reset() to shutdown_nice().
If you want to disable the reboot feature, then re-define the keymap to
not have a RBT call.
1994-01-18 05:33:34 +00:00
nate
06afe3855a Changed the default syscons keymap to have <CTL-ALT-ESC> enter the
debugger and <CTL-ALT-DEL> call the reboot command.
1994-01-18 05:31:37 +00:00
dg
fff1da2aba "New" VM system from John Dyson & myself. For a run-down of the
major changes, see the log of any effected file in the sys/vm
directory (swap_pager.c for instance).
1994-01-14 16:25:31 +00:00
ache
d3bbf3ef4d From ache:
Choose older MULTIPORT version, because lastest bde version
	not worked.
	Don't force HUPCL for bidirectional case.
From bde:
	Use bit (1 << (16 + 4)) in schedsoftcom() to avoid clash with
	non-serial h/w on IRQ4.
	Allow FIFO_TRIGGER in config.
	Clear com->mcr_image when clearing mcr for init of 4port.  The
	usual value MCR_IENABLE should have broken 4ports unless
	something happened to clear it later.
	Turn off interrupts as well as DTR after an error waiting for
	carrier (bidir dialin case).
	Drain fifo more carefully.
	Don't hang up if debugging.
	Rearrange siointr() -> siointr1() for multiport case for speed,
	lower latency and clarity.
	Use suser() to check perms.
	Provide missing splx() after failed perms checks.
	c_ispeed == 0 means c_ispeed = c_ospeed (POSIX).
	Set parameters (except speed) for c_ospeed == 0 as well as
	hanging up.
	Better initialization for console (fifo stuff...).
	Misc. cleanups.
	Fix dead hang if modem power is off.
1994-01-11 18:31:45 +00:00
dg
59648ea2fc Convert syscall to trapframe. Based on work done by John Brezak. 1994-01-03 07:55:47 +00:00
ache
44196ffe13 Temporary plug CLOCAL security hole, while sticky bits
yet not implemented. Only for bidirectional case.
1994-01-02 10:17:29 +00:00
ache
4119384dea Use separate fields for format GAP and read/write GAP.
Restore usage of read/write GAP.
1993-12-21 05:09:21 +00:00
rich
c77639cf62 Don't cast 2nd arg to fillw() per David's comments. The cast
breaks cursor positioning.
1993-12-21 03:27:26 +00:00
rich
e2d77e770b cast arg 2 of fillw() calls to type caddr_t as in pccons.
add "manual escape to debugger" arg in call to Debugger().
cast 1st arg to untimeout() to type timeout_func_t as done for timeout().
1993-12-21 02:49:13 +00:00
wollman
71b67e5a56 Make everything compile with -Wtraditional. Make it easier to distribute
a binary link-kit.  Make all non-optional options (pagers, procfs) standard,
and update LINT to reflect new symtab requirements.

NB: -Wtraditional will henceforth be forgotten.  This editing pass was
primarily intended to detect any constructions where the old code might
have been relying on traditional C semantics or syntax.  These were all
fixed, and the result of fixing some of them means that -Wall is now a
realistic possibility within a few weeks.
1993-12-19 00:55:01 +00:00
ache
c7341bb860 Media table reorganization.
Entries for 800 and 820 fixed.
From vak@kiae.su:
incorporate Joerg Wunsch formatting code
correct handle timeouted operations
fixed entry for 720 media
1993-12-19 00:40:49 +00:00
ache
40e3061440 Fix tsleep "waitvt" wait data from vak@kiae.su 1993-12-18 22:50:51 +00:00
ache
308aea5686 Reorganization of format table.
GAP values changed suitable for possible format code addition.
Read/write GAP always 2 now.
Interleave parameter added for possible format code addition.
Many logical formats added.
720K physical drive added.
Problems: still can't read 720..820 media in 1.44 drive.
1993-12-18 01:16:26 +00:00
ache
a890881633 RTCFDT_720K (physical drive 720K) added. 1993-12-18 01:12:47 +00:00
ache
fcc993cb70 Added following formats (derived from MSDOS fdformat):
800K in HD 5.25in  (maximum for DD diskettes)
1.44M in HD 5.25in (for easy distributions)
1.46M in HD 5.25in (maximum for 5.25)
Some cosmetique changes.
1993-12-16 19:47:42 +00:00
ache
1ffe253d64 Change default dtrwait value to 2 seconds.
Change C-style into static initializer per Bruce request.
1993-12-16 04:38:27 +00:00
ache
f6d8620bac No more partition bits in floppy minor.
Now minor looks like UU DDDDDD, UU - unit, DDDDDD - density.
If density == 0, CMOS-detect format assumed.
Fix attach code for correct work with unknown CMOS
floppy types.
Trick diskerr to handle new minor.
1.722M floppy in 1.44M drive popular format added.
1993-12-16 04:28:42 +00:00
dg
e6b36ffc84 set output flags to ttydefault if COMCONSOLE is defined. 1993-12-13 13:20:50 +00:00
ache
dd94939031 Add more strictly size check into Fdopen to eliminate
possible end-user errors.
Now:
1) on physical 1.2 can open logical 1.2, 720, 360H
2) on physical 1.44 can open logical 1.44, 720
3) on physical 360 can open logical 360
All other variants refused.
C-style improved in this check, multiply if's changed to switch.
1993-12-13 01:34:28 +00:00
ache
240df33494 Add 360K floppy support.
More work to add 720K floppy support.
Restore good old dependance of device and floppy type.
Now:
fd?a == 1.44
fd?b == 1.2
fd?c == 720
fd?d == 360 in HD
fd?e == 360
Add more strict size check in Fdopen, not it refuse:
1) Attempt to open any type expect fd?e, if you have only 360K drive.
2) Attempt to open fd?a if you have only 1.2 drive.
1993-12-12 20:26:56 +00:00
ache
72cc2e7f62 Add popular 720k floppy in HD drive floppy type.
Restore check for NUMTYPES in Fdopen.
1993-12-12 16:46:54 +00:00
ache
26f4641e6c Force HUPCL in bidirectional port open.
This don't allow it hangs forever.
1993-12-11 00:36:14 +00:00
ache
bc518291b7 1) Fix error with port recognition, speed initialization code
added to probe.
2) Force CLOCAL=on for outgoing ports and CLOCAL=off for
incoming ports into open in bidirectional case.
3) Add DELAY after writing to com_ier for fifo drain into probe.
1993-12-09 17:24:19 +00:00
ats
1108a57b4c Fixed the error that a Fdopen succeeds without a found fd controller in
the system.
1993-12-04 16:13:18 +00:00
alm
db1888bf05 Reset fdc during probe.
From: <dec@lazarus.nrtc.northrop.com>
   Changes between EPSILON and RELEASE of FreeBSD have again caused
the kernel to not see my floppy disk drives.  I don't know what happened,
'cause I don't see any changes to fd.c, but here is an old fix that
I have applied to the probe routine which will solve the problem (at
least for me).  Since this is a rather brute-force solution - I understand
if you want to ignore it...

[Upgrading to pre-Beta FreeBSD caused this on my system. -AM]
1993-12-03 05:01:40 +00:00
rich
47ffcbfe51 Fix conflicting prototypes and return values. 1993-11-27 06:32:41 +00:00
wollman
8e24073a9b Make the LINT kernel compile with -W -Wreturn-type -Wcomment -Werror, and
add same (sans -Werror) to Makefile for future compilations.
1993-11-25 01:38:01 +00:00
chmr
5bd9041020 Changed return(-1) in switch_scr to return(EINVAL), because -1 is
ERESTART on return from a system call.
1993-11-23 18:20:52 +00:00
ache
8d34e09677 Fix attach message, make separate line for it
(old version assumed that line is probe line)
1993-11-17 23:38:23 +00:00
ache
3e31049377 New sio driver from Bruce. 1993-11-14 23:29:01 +00:00
ache
5a7a2e36f5 Add missing read flush code to siostop 1993-11-08 19:36:32 +00:00
wollman
bd2b2815f2 Made all header files idempotent and moved incorrect common data from
headers into a related source file.  Also fixed a bug in ed_probe() where
it was possible to fall off the end of the function
1993-11-07 17:44:34 +00:00
ache
a75aa5402e DST offset calculation removed, it is wrong in any case. 1993-11-04 01:56:31 +00:00
ache
c71cb496fa Russian keymap (RUKEYMAP) changes:
New syscons keys added: NEXT, DBG, RBT
AltGr Shift removed from right Alt
Shift state on -,+ keys exchanged
1993-11-04 01:49:20 +00:00
jkh
10ecafe61a Now that STAR_SAVER and SNAKE_SAVER are kernel options, add code
to make sure that bad things don't happen if both are (incorrectly)
defined at once.
1993-10-31 00:19:01 +00:00
jkh
7967c5b8ed Fixed bug where syscons.c wouldn't compile if DDB was enabled.
Removed FAT_CURSOR and STAR_SAVER as compiled in defaults - these should
be kernel options!
1993-10-31 00:09:02 +00:00
rgrimes
c5a61da88b Put back the $Id$ strings 1993-10-28 06:15:14 +00:00
jkh
c914abf4aa This is syscons version 1.1 1993-10-28 05:27:36 +00:00
jkh
1198436deb Patch from stever@csuohio.edu (Steve Ratliff) to make FAT_CURSOR work
on HDA/CGA displays.
1993-10-18 02:19:54 +00:00
rgrimes
7b833e734d Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some
minor cleanup.  Added $Id$ to files that did not have any version info, etc
1993-10-16 19:17:18 +00:00
rgrimes
3e9257e324 Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some
minor cleanup.  Added $Id$ to files that did not have any version info, etc
1993-10-16 13:48:52 +00:00
dg
36e051f4b5 Disassociate DTR and RTS. They were coupled together and shouldn't have
been. This was necessary to work around problems with some equipment
that don't respond favorably to having these both dropped simultaneously.
1993-10-14 09:13:54 +00:00
rgrimes
6eefbe63b5 Use KERNBASE for locating stuff in kernel virtual memory, not hard coded
constants.
1993-10-12 06:59:36 +00:00
dg
cdb2f59a7f incorporated patches from Marc Frajola (marc@escargot.rain.com) to
unset TS_TBLOCK when the RBLEN falls below the low water mark.
1993-10-12 06:32:28 +00:00
jkh
386f6d6a1c Removed FAT_CURSOR as default since it breaks certain CGA displays
and it is better to conform to the lowest common denominator.
Those wishing to retain it can always use options FAT_CURSOR in
their config files.
1993-10-08 21:21:59 +00:00
jkh
4109b57b94 Latest changs for XFree86 2.0 1993-10-04 22:23:03 +00:00
rgrimes
dabd9eb789 Change #include <sys/console.h> to <machine/console.h>, file will be moved
shortly
1993-09-30 23:59:49 +00:00
jkh
b1b7cff9e6 From: "Andrew A. Chernov, Black Mage" <ache@astral.msk.su>
AltGr Lock code for zero repeat count ommited, so AltGr Lock
works only one time and never again :-)
1993-09-29 00:42:10 +00:00
jkh
ba9a9c7eb6 Version number support for XFree86 1993-09-28 20:53:48 +00:00
jkh
49b312bb92 Change to sio for recognising the last serial port on a multiport
card correctly.

Updated syscons to 0.2e, added features for upcoming XFree86 2.0,
fixed crashbug.
1993-09-28 00:01:18 +00:00
rgrimes
53b6ed3870 >From: bde@kralizec.zeta.org.au (Bruce Evans)
Date: Thu, 16 Sep 93 01:35:10 +1000
Julian writes:

>In fact DEVIDLE and FINDWORK ended up being basically equivalent.
>the bit I wonder about, is the returning of 0.. What (other than
>another request from somewhere else in the kernel) is going to start
>work on the next item on the queue?

I think removing FINDWORK would make things clearer.

Nothing much is going to start work on the next item.  However, it is
pointless to continue processing the queue for the same unready drive.
Aborting all reads and trying harder to perform all writes would be
better.
Julian writes.

> no, actually it should be:
> fdt = fd_data[FDUNIT(minor(dev))].ft;

Fixed.
From: bde@kralizec.zeta.org.au (Bruce Evans)
Date: Thu, 16 Sep 93 22:56:01 +1000
The fd driver reported the wrong cylinder/head/sector numbers after an
error (ST3 is only valid after a sense-drive command), and didn't report
fs block numbers (diskerr was not used).

There was an old problem with writes to block fd devices.   Try this:

1. write protect floppy in fd0.
2. tar cf /dev/fd0a /dev/null.  Repeat a few times.  Later writes tend to
   terminate earlier.
   3. un-write protect floppy.
   4. repeat step 2.  The writes tend to return 0, 2048, 4096, ... and then
      succeed.

This was caused by a bug in vfs__bios.c.  (The bug is fixed in NetBSD's
vfs_bio.c.)  fd.c sets bp->b_resid to nonzero after an error.  vfs__bios.c
was not initializing bp->b_resid.  This causes some writes to terminate
early (e.g., writes to block devices; see spec_write()).

Related funnies:

1. Nothing tries to write the residual bytes.
2. The wd driver sets bp->b_resid to 0 after an error, so there's no
   way anything else could write the residual bytes.
3. I use the block fd device for tar because the raw device seemed to
   have more bugs long ago, and because it ought to be able to handle
   buffering more transparently (I don't want to have to know the
   device size).  But spec_write() always uses the size BLKDEV_IOSIZE
   == 2048 which is too small.  For disks it should use the size of
   one track (rounded down to meet the next track boundary or the i/o
   size).  Here it would help if the DIOCGPART ioctl worked.  But
   DIOCGPART is not implemented for floppies, and the disk size is
   ignored except for partitions of type FS_BSDFFS.

Bruce
1993-09-23 15:22:57 +00:00
rgrimes
fe3380ea19 Removed $Log$ section and patch kit headers. And here is the full
message for Bruces changes:

>From: bde@kralizec.zeta.org.au (Bruce Evans)
>Subject: fixes for fd driver

I think I've fixed some bugs in the 0.2.4 fd driver.

1. The main cause of hangs was that there was no timeout for seeks.  So
   attempting i/o with no floppy in the drive hung iff a seek was required.

2. Opens of unattached drives were allowed.  The kernel usually paniced
   soon after due to a bad pointer.

3. Some timeout functions ran at splclock() instead of splbio().  This
   may not have mattered.

4. The state machine was left in a funny state after a timeout.

5. Some function headers were new-style.

6. I picked up some code posted the other day to implement label ioctls.
   Now `disklabel fd0' works.  See a comment for how to modify conf.c.
1993-09-15 23:27:45 +00:00
rgrimes
9a1f245561 >From: paul@u.tvt.se (Paul Pries)
>Subject: Bad bug in kbdtables.h [FreeBSD]

I found a bug in /sys/i386/isa/kbdtables.h which contain the
different keyboard layouts for syscons.  This regards all tables exept
the Danish and US.  When compiling the kernel with any other keymapping
than Danish or none at all (US), you get an error that 'key_map' is undefined.
This is because there is a typo in the name of the struct containing
the tables, keymap intead of key_map.
1993-09-15 23:03:21 +00:00
jkh
c9fee73323 Bruce's multifarious patches for the floppy driver (not well tested, but
since what we have is crap as it is, it can't do much worse!).
1993-09-14 19:34:32 +00:00
rgrimes
0f9beb0e4f From guido@gvr.win.tue.nl Wed Sep 8 13:34:16 1993
That is because TIOCMGET was broken. Yes...this is known for some time
and no, we (Bruce and me) never posted it. Why? Simply because we choose
to post fixes when we fixed most of the bugs.

Anyway..now that the slip problems are coming, here is a fix for
correct TIOCMGET behaviour.

-Guido
Note: this should be tested first (Rich?).  Tested by rgrimes
1993-09-10 16:59:16 +00:00
jkh
d8d8a25db4 Soren's latest syscons changes. 1993-09-08 22:11:48 +00:00
rgrimes
3653e4ed94 From michaele@vice.ico.tek.com Wed Sep 8 09:50:45 1993
Subject: Re: Some small errors in GAMMA
4.      Move printf("\n"); at line 491 in "/sys/i386/isa/sio.c" to after
        COM_MULTIPORT block at line 512.
From rgrimes:
The above would cause the word (multiport) with out a new line to
appear after the uart type message if you had COM_MULTIPORT enabled.
1993-09-08 17:38:05 +00:00
rgrimes
914dc32d8f Replaced the return (1)'s with return (IO_KBDSIZE) in the probe code so
that the printfs during the probing prints the range instead of just the
start address.
1993-08-28 13:26:30 +00:00
rgrimes
d389a11306 xxxprobe now returns the correct number of I/O registers used so that
the probe output during boot gives the I/O range instead of just the
starting address
1993-08-28 03:02:52 +00:00
rgrimes
600802b515 Added from: line to reference the pccons.c derivation of this code, otherwise
the BSD copyright would be very bad to have on this file.
1993-08-20 17:19:29 +00:00
rgrimes
e22df49c23 Fixed poor timeout code in out_fdc. The timeout counter was not being
reinitialized between while loops.  Added comments about what was going
on in the out_fdc routine.

out_fdc now returns if the direction bit is not set in time instead of
trying to wait for MRQ to get cleared.
1993-08-12 09:21:20 +00:00
jkh
2366a82233 Updated syscons to 0.2b - please test this! It won't be in the ALPHA
release, but it's still worth testing.
1993-07-30 02:20:26 +00:00
jkh
3af03b7095 Added necessary files for syscons (may move font include later, but for now
it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
jkh
912c4a4d1d Applied Andrew's patch to fix loop-on-logout problem. 1993-07-20 02:06:49 +00:00
jkh
834f9415ec Removed check for interrupting board before interrupts were enabled.
This should result in more AST clones getting seen.
1993-07-20 00:22:30 +00:00
rgrimes
abbebfcb9a Fixed sccs id to be From:\n com.c xxxx. The sccs id was changed by the
patch kit and it should not have been.
1993-07-18 21:27:57 +00:00
dg
25bd556275 Modified attach printf's so that the output is compatible with the "new"
way of doing things. There still remain several drivers that need to
be updated.  Also added a compile-time option to pccons to switch the
control and caps-lock keys (REVERSE_CAPS_CTRL) - added for my personal
sanity.
1993-07-15 17:53:14 +00:00
rgrimes
25062ba061 Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00