peter
cecd2635d9
Move opt_sio.h options to conf/options and activate in isa/sio.c
1999-05-09 13:10:49 +00:00
phk
e05bc3b49a
Unconfuse DEV_MODULE() and DEV_DRIVER_MODULE() about the difference between
...
a major number for a dev_t.
1999-05-09 13:00:50 +00:00
dfr
7d04d62126
Remove DDB.
1999-05-09 11:42:19 +00:00
dfr
d04db09021
Back out the last change to disk.c - a kernel change removed the need.
...
Enabled writing to the disklabel when writing a disk (only affects alpha).
1999-05-09 11:34:58 +00:00
dfr
94c48499c7
Hack the diskslice stuff so that it allows the alpha sysinstall to
...
manipulate the disklabel. This is almost certainly not the right way
to do it but I'm desperate.
1999-05-09 11:27:41 +00:00
phk
e8f4fc4a1d
add some amount of sanity to the way the gdb stuff finds its device.
...
I'm not too happy about the result either, but at least it has less
chance of backfiring.
This particular feature could be called "a mess" without offending
anybody.
1999-05-09 10:51:13 +00:00
peter
e85d75ef71
Fix two warnings.
1999-05-09 10:45:54 +00:00
peter
0fb0af2fe2
Fix warnings.
1999-05-09 10:43:54 +00:00
phk
83bed983cb
Yet a major/dev_t confusion
...
Spotted by Bruce.
1999-05-09 10:42:39 +00:00
phk
20c48466e9
siocngetc & putc can be staticized.
1999-05-09 10:28:50 +00:00
phk
aa8b804336
Yet another place which knew too much. Still not sure how much
...
good this does in the end.
1999-05-09 10:25:30 +00:00
phk
5311a954e6
fix some DRIVER_TYPE / INTR_TYPE confusions.
1999-05-09 09:56:52 +00:00
phk
bea63b9cdb
Don't confuse dev_t and major numbers in DEV_MODULE()
1999-05-09 08:58:45 +00:00
phk
2ed2581bdf
Peter beat me to half this patch, but didn't do the other half:
...
set d_bmaj
don't cast a dev_t to int before comparing to NODEV
1999-05-09 08:18:12 +00:00
peter
09fa1aef80
Comment advising ordering of cdevsw_add and bdevsw_add is obsolete (no
...
bdevsw_add any more).
1999-05-09 08:10:17 +00:00
phk
3323f4372e
Duh, bdevsw() takes dev_t arg.
1999-05-09 07:56:36 +00:00
jb
14af5de490
Mutex test program.
...
Submitted by: Daniel Eischen <eischen@vigrid.com>
1999-05-09 07:55:24 +00:00
jb
18a2ce4cb6
Add mutex test program.
1999-05-09 07:50:31 +00:00
kato
cdd495662b
Removed DRIVER_TYPE_TTY field.
1999-05-09 05:02:26 +00:00
yokota
143736b6b7
Reserve a major number for the frame buffer device.
1999-05-09 05:02:15 +00:00
kato
2820aa3956
Sync with sys/isa/sio.c revision 1.234.
1999-05-09 05:00:54 +00:00
yokota
015b8b835b
Don't confuse cursor keys with numpad keys when composing a char code.
...
PR: kern/10988
1999-05-09 05:00:19 +00:00
yokota
b62c543b38
Minor tweak after the introduction of new-bus to i386; properly
...
check "disabled" and "flags" probe hints.
1999-05-09 04:59:24 +00:00
yokota
aea63d1e76
Revive APM hooking code for i386 arch now that the same source file is
...
used for both i386 and alpha (the code was in sys/i386/isa/psm.c, but
was disabled when ported to alpha.)
1999-05-09 04:58:35 +00:00
yokota
58c19147f4
Make apm_probe() properly return an error code when APM BIOS calls
...
failed, so that the apm driver won't be attached.
1999-05-09 04:58:13 +00:00
yokota
3f092f3796
Added backward compatibility to set key repeat rate.
...
Requested by: bde
1999-05-09 04:57:51 +00:00
kato
378d14c845
Removed DRIVER_TYPE_TTY field.
1999-05-09 04:56:42 +00:00
kato
5baa450667
Sync with sys/isa/atkbd_isa.c revision 1.4.
1999-05-09 04:53:58 +00:00
kato
8ced816ac4
Sync with sys/i386/isa/wd.c revision 1.197.
1999-05-09 04:42:10 +00:00
kato
01fed2db06
Sync with sys/i386/isa/pcausio.c revision 1.48.
1999-05-09 04:39:36 +00:00
kato
c27722cd8b
Sync with sys/i386/isa/npx.c revision 1.61.
1999-05-09 04:38:27 +00:00
kato
d6f0de713f
Sync with sys/i386/isa/mse.c revision 1.42.
1999-05-09 04:37:17 +00:00
kato
870889ecbf
Sync with sys/i386/isa/fd.c revision 1.142.
1999-05-09 04:34:28 +00:00
kato
23c23f2ecb
Sync with sys/i386/i386/userconfig.c revision 1.141.
1999-05-09 04:30:08 +00:00
kato
0ee5d68a6e
Sync with sys/i386/conf/majors.i386 revision 1.72.
1999-05-09 04:28:23 +00:00
kato
aa334091f8
Sync with sys/i386/conf/files.i386 revision 1.238.
1999-05-09 04:27:30 +00:00
kato
2260d3ead9
Sync with sys/i386/conf/Makefile.i386 revision 1.149.
1999-05-09 04:26:06 +00:00
ken
fce282444d
Add a facility in the CAM error handling code to retry selection timeouts.
...
If the client requests that the error recovery code retry a selection
timeout, it will be retried after half a second. The delay is to give the
device time to recover.
For most of these drivers, I only added selection timeout retries where
they were also retrying unit attention type errors. The sa(4) driver calls
saerror() in a number of places, but most of them don't request retrying
unit attentions.
Also, bump the default minimum CD changer timeout from 2 to 5 seconds and
the maximum timeout from 10 to 15 seconds. Some Pioneer changers seem to
have trouble with the shorter timeout.
Reviewed by: gibbs
1999-05-09 01:25:34 +00:00
dt
4a4467575d
Fix a freelist trashing under following confitions:
...
- first program lock a region in a file,
- second program wait on the lock,
- first program extend the region,
- second program interrupted by a signal.
1999-05-08 22:46:46 +00:00
dfr
e4989c23fe
Move the declaration of the interrupt type from the driver structure
...
to the BUS_SETUP_INTR call.
1999-05-08 21:59:43 +00:00
ken
d1098a6692
The 2930U2 and 3950U2 are supported by the Adaptec driver.
1999-05-08 21:43:28 +00:00
peter
ed3598a09e
Trivial tweak to avoid a warning.
1999-05-08 21:36:03 +00:00
peter
deb89b149e
Add some notes about the globalness of certain things like interrupts
...
and ISA DMA channels (ie: on most PCI systems, they are not.. they are
on the ISA side of the PCI-ISA bridge and could be duplicated if there
were multiple PCI-ISA bridges, say in a laptop docking station), while
the APIC resources would be global on SMP systems.
Also, revert a previous change, change some printfs back to panics.
1999-05-08 21:34:34 +00:00
peter
124a7c3d9f
Fix a typo (eisa<->isa) and some minor cosmetics.
1999-05-08 21:30:38 +00:00
peter
fdb0bbc895
GC some #if 0 junk
1999-05-08 21:28:39 +00:00
ken
4ee5733cc5
Devices are hardwired with "unit 0", not "lun 0" as was in these man pages.
...
Also, update the pass(4) man page to indicate that some CCBs must be
sent through the xpt(4) device and cannot be sent through a pass device.
PR: 8826
1999-05-08 21:28:18 +00:00
dfr
4537aba471
Make libdisk see the existing partitiions on the alpha.
1999-05-08 21:21:50 +00:00
peter
e3538aa94e
Print 'irq nn' on the device attach line like the old pci code did.
...
However, we are not printing 'int a/b/c/d' yet, is it worth it on non-SMP
systems? (It's useful when tracing PCI->IO-APIC routing on SMP systems)
1999-05-08 20:28:01 +00:00
peter
8205d9ed5d
Print the child IRQ on it's identification line.
1999-05-08 20:25:38 +00:00
peter
89b231e27d
Don't print 'interrupting at irq nn' on the x86 family, it's not all
...
that big a deal just yet and isn't worth a whole line on the boot screen.
This could change later in the face of multi-ISA-bus (eg: laptop docking
stations with two independent ISA busses) and SMP/APIC systems. The Alpha
already has multiple interrupt destinations to deal with.
1999-05-08 20:24:44 +00:00
