Always initialize some variables GCC warns about. They are initialized in
every path where they are used, but GCC doesn't know that.
Sponsored by: Dell EMC Isilon
Since r326501 which added COMPAT_FREEBSD32 to the GENERIC config for arm64,
we need to build systrace_freebsd32, since dtraceall depends on it.
Reviewed by: ed, gnn
Differential Revision: https://reviews.freebsd.org/D13670
pru_peeraddr().
This is already true when called via kern_getsockname() and
kern_getpeername(). This patch sets it also, when they arecalled
via soo_fill_kinfo(). This is necessary, since the corresponding
functions for SCTP require the vnet to be set. Without this,
if a process having an wildcard bound SCTP socket is
terminated and a core is written, the kernel panics.
Reviewed by: bz
Differential Revision: https://reviews.freebsd.org/D13652
The value written to E1000_TARC(0) wasn't intended to have every bit but
E1000_TARC0_CB_MULTIQ_3_REQ cleared; a ~ was missing.
Also change the referenced spec update section in the comment to the correct
section.
Sponsored by: Intel Corporation
An lld-linked i386 kernel hangs on boot, after em(4) starts. This seems
similar to the issue that prompted us to disable VIMAGE on arm64 in
r326179. Disable VIMAGE on i386 for now while we investigate.
PR: 225077
Sponsored by: The FreeBSD Foundation
Opaque pointers should be void *. Note that this does not go through
the tree removing all of the now-unnecessary casts.
Reviewed by: kib
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D13848
Just copyin the IV into the crypto descriptor directly. This avoids
copying the IV twice for each operation.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D13847
For each we need to walk the MADT to find which we have, then add the
driver as needed. As each may have a child they will each walk the same
table to find these details.
Reviewed by: mmel
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8720
This adds a new acpi_bus interface with a map_intr method. This is similar
to the Open Firmware map_intr method and allows us to create the needed
mapping from ACPI space to INTRNG space.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8617
Highlights of the new bindings:
- ahb clock is specified as 'stmmaceth'
- The PHY to be used is now specified as phy-handle
- We must now check the parent of the node phy-handle points to in order to
discover if we're using internal PHY.
- The ephy clk/reset will be specified on the PHY node, not the emac node.
Care has been taken to ensure that we remain compatible with the older
bindings that we were previously using.
Tested on: Pine64 (A64, old bindings)
Tested on: Pine64-LTS (A64, new bindings) [manu]
Tested on: OrangePi-One (H3, internal PHY) [manu]
Tested on: NanoPi M1 Plus (H3, external PHY) [manu]
Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D13777
We already clear %RFLAGS.DF on the kernel entry due to the compiler's
ABI requirements.
Suggested by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Hardware already did it for us due to the mask loaded into the
MSR_SF_MASK msr register.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D13838
The symbol is just an offset in the hardware TSS structure, it is not
limited to the common_tss instance.
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Avoid the lock in vtophys() by providing a static direct-mapped
spinlock- protected output buffer to use when the console driver
cannot acquire locks for some reason. This allows the idle thread
to use printf() (e.g. the SMP startup messages) without crashing
the kernel.
Created by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
Sponsored by: FreeBSD Foundation
Make sure to set LPCR[LPES] so that external interrupts set SRR0 and SRR1
instead of HSRR0 and HSRR1. Without this, external interrupt handlers would
get the wrong MSR value when executing, causing eventual madness.
Created by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
Sponsored by: FreeBSD Foundation
Fix AP startup, which was broken.
Created by: Nathan Whitehorn <nwhitehorn@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
Sponsored by: FreeBSD Foundation
Add basic power control (reset, power off) and bind
ttyuX to opal console so that init will start login there.
Created by: Nathan Whitehorn <nw@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
Sponsored by: FreeBSD Foundation
Unconditional 32-bit shift is not endianness-safe.
Modify the logic to work both on LE and BE.
Submitted by: Wojciech Macek <wma@freebsd.org>
Reviewed by: np
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D13102
OPAL is a dedicated firmware acting as a hypervisor.
Add generic functions to provide all access.
Created by: Nathan Whitehorn <nw@freebsd.org>
Submitted by: Wojciech Macek <wma@freebsd.org>
shutdown_post_sync event. For adashutdown, this causes problems
because we need to poll for completion of the commands, but we're not
yet officially dumping yet, so the code from r326964 assumed we could
use the interrupt-driven commands rather than the polled ones. This
lead to a hang. Prevent this by also checking to see if the scheduler
is stopped to do the polling.
Reported by: markj@
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D13845
In particular, no probes were present for AEAD requests, but also for
some other error cases in other ioctl requests.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
- Call resource_int_value() once during attach, rather than within the
pci_(read|write)_config() code path; this avoids taking a blocking mutex
to read kenv variables.
- Use a spin lock to protect non-atomic config space accesses; this matches
the behavior of Darwin's AppleMacRiscPCI driver.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D13839
Additionally, move the overflow check logic out to WOULD_OVERFLOW() for
consumers to have a common means of testing for overflowing allocations.
WOULD_OVERFLOW() should be a secondary check -- on 64-bit platforms, just
because an allocation won't overflow size_t does not mean it is a sane size
to request. Callers should be imposing reasonable allocation limits far,
far, below overflow.
Discussed with: emaste, jhb, kp
Sponsored by: Dell EMC Isilon
Previously the AIO subsystem would save a snapshot of the currently
configured per-process limits the first time a process used AIO. The
process would continue to use the snapshotted limits ignoring any
changes to the global limits during the rest of its lifetime. This
change removes the snapshotted values and changes the AIO code to
always check the global values which can be toggled at runtime.
This means an administrator can now change the effective limits of
existing processes. This is more consistent with how other limits
configured via sysctl work in FreeBSD.
Reviewed by: asomers, kib
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D13819
This permits N32 hard-float binaries to use 64-bit floating point
registers (which is what N32 binaries expect) matching the N64 ABI.
Reviewed by: imp, jmallett
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D13830
Basic use of mallocarray to prevent overflows. Here allocation is done
with M_NOWAIT so the code is prepared for the possibility of returning
NULL values. Since mallocarray expects unsigned parameters, unsign some
related variables to minimize sign conversions.
Reviewed by: mckusick
We would previously just free the request BIO, which would either cause
the disk to stay stuck in the SYNCHRONIZING state, or result in
synchronization completing without having copied the block which
returned an error.
With this change, if the disk which returned an error is the only active
disk in the mirror, the synchronizing disk is kicked out. Otherwise, the
read is retried.
Reported and tested by: pho (previous version)
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
The driver now fully observes watchdog(9) protocol.
Previously a too large timeout was silently clamped while the correct
behavior is to disable the watchdog and leave the error as is
(i.e. to not report success).
Also, previously a too small value caused the timer to stop while the
correct behavior is to use the minimal supported value.
MFC after: 2 weeks
Iwasaki-san's copyright over. Remove FIXME code that couldn't possibly
work. Call tc_settime() with our estimate of the delta we've been
alseep (the one we print) to adjust the time. Not sure what to do
about callouts, so keep the small #ifdef in place there.
Differential Revision: https://reviews.freebsd.org/D13823
more in r317426. There's nothing in the tree that references digiio.h
(apart from digictl(8)), so no driver implements it. Since digictl(8)
was only used to control digi(4) devices, it too should go.
