6.0.0 (branches/release_60 r321788). Upstream has branched for the
6.0.0 release, which should be in about 6 weeks. Please report bugs and
regressions, so we can get them into the release.
Please note that from 3.5.0 onwards, clang, llvm and lldb require C++11
support to build; see UPDATING for more information.
MFC after: 3 months
Disabled the use of RSS hash from the network card aka flowid for
lagg(4) interfaces by default as it's currently incompatible with
the lacp and loadbalance protocols.
The incompatibility is due to the fact that the flowid isn't know
for the first packet of a new outbound stream which can result in
the hash calculation method changing and hence a stream being
incorrectly split across multiple interfaces during normal
operation.
This can be re-enabled by setting the following in loader.conf:
net.link.lagg.default_use_flowid="1"
Discussed with: kmacy
Sponsored by: Multiplay
temporary workaround. This fixes zfs booting generally, but breaks all
GELI booting by default. Add note to UPDATING to this effect. When the
GELI issues are resolved, this will be reverted.
PowerPC kernels in r6 is actually metadata from loader(8) or gibberish
left in r6, which is not required to be anything under the
PAPR/ePAPR/CHRP/OF standards, by another boot loader.
Note that, as a result, systems need a new boot loader to boot PPC kernels
after this revision without ending up at a mountroot prompt. New boot
loaders are backwards compatible and can boot older kernels.
Reviewed by: jhibbits
MFC after: 2 months
Transition to WITH/WITHOUT_LOADER_GELI to flag support or not of GELI
in the boot loaders. Add HAVE_GELI so components can flag they need
support (since it's too large to include everywhere). Add temporary
warnings for the old forms to ease transition.
Also, update test script to build without GELI on x86.
Sponsored by: Netflix
Rename LOADER_FIREWIRE_SUPPORT to MK_LOADER_FIREWIRE. Only build
libfirewire when this is "yes". Add note to updating. Fix build script
to build this for x86 so the option doesn't decay. sparc64 supports
ZFS, so also build it MK_ZFS=no.
Sponsored by: Netflix
This can be disabled by putting WITHOUT_AUTO_OBJ=yes in /etc/src-env.conf, not
/etc/src.conf, or passing it in the environment.
The purpose of this rather than simply flipping the default of AUTO_OBJ to yes
is to avoid hassling users with auto.obj.mk failures if the wanted OBJDIR is
not writable. It will fallback to writing to the source directory like it does
today if MAKEOBJDIRPREFIX is not writable.
The act of enabling MK_AUTO_OBJ disables all 'make obj' treewalks since
previous work has made those not run if MK_AUTO_OBJ==yes in Makefile.inc1.
Relnotes: yes
Reviewed by: sjg
Discussed at: https://lists.freebsd.org/pipermail/freebsd-arch/2016-May/017805.html
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12841
This changes the build OBJDIR from the older style of /usr/obj/<srcdir> for
native builds, and /usr/obj/<target>.<target_arch>/<srcdir> for cross builds to
a new simpler format of /usr/obj/<srcdir>/<target>.<target_arch>. This
new format is used regardless of cross or native build. It allows
easier management of multiple source tree object directories.
The UNIFIED_OBJDIR option will be removed and its feature made permanent
for the 12.0 release.
Relnotes: yes (don't note UNIFIED_OBJDIR option since it will be removed)
Prior work: D3711 D874
Reviewed by: gjb, sjg
Discussed at: https://lists.freebsd.org/pipermail/freebsd-arch/2016-May/017805.html
Discussed with: emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12840
- Remove FreeBSD 4.x of building the kernel.
While it might technically work, it is better to
document the 'correct' way than how to shoot oneself
in the foot
- Remove reference to CVS -P for src.
Without this the user has to mess with 'make -f Makefile.inc1 ...' to figure
out where the files are installed in the OBJDIR and then they need to copy them
to where they really wanted them. Using DESTDIR may be problematic after
r325001 as well.
The files will be installed to DESTDIR/NXTP where NXTP defaults to /nxb-bin.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
files will produce an error and buildkernel will fail. Previously missing
KERNCONF files silently failed giving no indication as to why, only to
subsequently discover during installkernel that the desired kernel was
never built in the first place.
This is a rework of r302865.
This is the correct patch.
Reviewed by: ngie (previous version, r302865)
MFC after: 2 months
Differential Revision: D7167
files will produce an error and buildkernel will fail. Previously missing
KERNCONF files silently failed giving no indication as to why, only to
subsequently discover during installkernel that the desired kernel was
never built in the first place.
This is a rework of r302865.
Reviewed by: ngie (previous version, r302865)
MFC after: 2 months
Differential Revision: D7167
It's awkward to have spaces in CAM device serial numbers. That leads to
such things as device nodes named "/dev/diskid/MYSERIAL%20%20%201". Better
to replace the spaces with "0"s. This change only affects the default
serial numbers for users who don't provide their own.
Reviewed by: ken, mav
MFC after: Never
Relnotes: Yes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D12263
On hard-float 32-bit arm platforms, always search for the soft float
binaries in the alternative locations.
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D12274
MFC After: 1 week
of fsck to automatically find alternate superblocks when the
standard one is trashed or unavailable.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11589
AKA Make time_t 64 bits on powerpc(32).
PowerPC currently (until now) was one of two architectures with a 32-bit time_t
on 32-bit archs (the other being i386). This is an ABI breakage, so all ports,
and all local binaries, *must* be recompiled.
Tested by: andreast, others
MFC after: Never
Relnotes: Yes
Our current approach to dependency tracking cannot cope with switching
generated asm syscall stubs into C wrappers. Perpetuate the hack in
Makefile.inc1 to paper over the problem until we can take a holistic
approach to fixing dependency problems.
Differential Revision: https://reviews.freebsd.org/D11344
Add forward compatibility so that new binaries can run on old
kernels. If the new system call from ino64 isn't available on your
system, then the old one will be used and the results translated. The
stat and statfs families of functions are fully emulated. While not
required by policy, in this case it is helpful to our users to provide
this compatibility. In this case, it allows rollback of the kernel
after installing a new userland should a problem be discovered. It
also prevents foot-shooting if a user does an install before rebooting
with the new kernel. Finally, it allows the use case where one needs
to run new binaries on an old kernel as part of an upgrade process.
The getdirentries family uses tricks that may not work on remote
filesystems. Specifically, it uses a buffer 1/4 the size requested to
get the data from he old syscall.
The code carefully uses direct syscalls for old system calls to avoid
referencing freebsd11_* symbols, which contaminate ld-elf.so.1's
export table due to its use of stat functions, which causes errno to
be incorrect in client programs due to the wrong *stat* function being
resolved in some cases.
This code should removed sometime after 12 is branched.
Tested on: 12-current binaries on a 10.3-beta kernel run and return
consistent results. 12-current kernel and userland with
packages from before ino64 was committed also work.
Differential Revision: https://reviews.freebsd.org/D11185
Reviewed by: kib@, emaste@
The BSDL dtc has grown the needed features (overlays mostly) and is able to
compile all of our base DTS.
You can use WITH_GPL_DTC is you need the GPL one or DTC= in make.conf(5)
to specify an alternate location for the compiler to use.
Discussed with: emaste, imp
All manpages in base are now compatible with mandoc(1), all roff documentation
will be relocated in the doc tree. man(1) can now use groff from the ports tree
if it needs.
Also remove checknr(1) and colcrt(1) which are only useful with groff.
Approved by: (no objections on the mailing lists)
META_MODE users actually do not need to do anything special assuming
they have COMPAT_FREEBSD11 enabled. The host tools in WORLDTMP will
continue to work just fine.
- mention COMPAT_FREEBSD11 earlier so that the steps are in chronological
order
- suggest removing /usr/obj before build to ensure there are no stale
objects
Reviewed by: allanjude, kib
Sponsored by: The FreeBSD Foundation
The upgrade process requires COMPAT_FREEBSD11 to support the combination
of "old" userland and "new" kernel that exists after "make kernel" and
reboot. Mention this explicitly for those using custom kernel configs.
Once the "new" world is installed the COMPAT_FREEBSD11 could be removed
again, but that does not seem necessary to mention in UPDATING.
Reported by: kib
Sponsored by: The FreeBSD Foundation
The existing upgrade process documented in UPDATING is both necessary
and sufficient for upgrading across the ino64 change. However, the
shortcut of installing both kernel + world before a single reboot has
been possible for quite some time, and several developers and users
were surprised by fallout from ino64. Add an explicit entry pointing
out that the full process must be followed.
Reviewed by: allanjude, gjb, vangyzen
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10877
r279908 added logic to Makefile.inc1 to automatically set
CROSS_BINUTILS_PREFIX for architectures not supported by the in-tree
binutils: arm64 when first introduced, and later riscv64 as well.
LLVM's LLD linker is now included in the base system, and is enabled by
default for arm64 and capable of linking world and kernel. Thus, avoid
automatically setting CROSS_BINUTILS_PREFIX and requiring the binutils
port if WITH_LLD_IS_LD is true.
Reviewed by: kan
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10310
If a jail has an explicitly assigned IPv6 loopback address then allow it
to be used instead of remapping requests for the loopback adddress to the
first IPv6 address assigned to the jail.
This fixes issues where applications attempt to detect their bound port
where they requested a loopback address, which was available, but instead
the kernel remapped it to the jails first address.
This is the same fix applied to IPv4 fix by: r316313
Also:
* Correct the description of prison_check_ip6_locked to match the code.
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: Multiplay
If a jail has an explicitly assigned loopback address then allow it to be
used instead of remapping requests for the loopback adddress to the first
IPv4 address assigned to the jail.
This fixes issues where applications attempt to detect their bound port
where they requested a loopback address, which was available, but instead
the kernel remapped it to the jails first address.
A example of this is binding nginx to 127.0.0.1 and then running "service
nginx upgrade" which before this change would cause nginx to fail.
Also:
* Correct the description of prison_check_ip4_locked to match the code.
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: Multiplay
the default partition, eMMC v4.41 and later devices can additionally
provide up to:
1 enhanced user data area partition
2 boot partitions
1 RPMB (Replay Protected Memory Block) partition
4 general purpose partitions (optionally with a enhanced or extended
attribute)
Of these "partitions", only the enhanced user data area one actually
slices the user data area partition and, thus, gets handled with the
help of geom_flashmap(4). The other types of partitions have address
space independent from the default partition and need to be switched
to via CMD6 (SWITCH), i. e. constitute a set of additional "disks".
The second kind of these "partitions" doesn't fit that well into the
design of mmc(4) and mmcsd(4). I've decided to let mmcsd(4) hook all
of these "partitions" up as disk(9)'s (except for the RPMB partition
as it didn't seem to make much sense to be able to put a file-system
there and may require authentication; therefore, RPMB partitions are
solely accessible via the newly added IOCTL interface currently; see
also below). This approach for one resulted in cleaner code. Second,
it retains the notion of mmcsd(4) children corresponding to a single
physical device each. With the addition of some layering violations,
it also would have been possible for mmc(4) to add separate mmcsd(4)
instances with one disk each for all of these "partitions", however.
Still, both mmc(4) and mmcsd(4) share some common code now e. g. for
issuing CMD6, which has been factored out into mmc_subr.c.
Besides simply subdividing eMMC devices, some Intel NUCs having UEFI
code in the boot partitions etc., another use case for the partition
support is the activation of pseudo-SLC mode, which manufacturers of
eMMC chips typically associate with the enhanced user data area and/
or the enhanced attribute of general purpose partitions.
CAVEAT EMPTOR: Partitioning eMMC devices is a one-time operation.
- Now that properly issuing CMD6 is crucial (so data isn't written to
the wrong partition for example), make a step into the direction of
correctly handling the timeout for these commands in the MMC layer.
Also, do a SEND_STATUS when CMD6 is invoked with an R1B response as
recommended by relevant specifications. However, quite some work is
left to be done in this regard; all other R1B-type commands done by
the MMC layer also should be followed by a SEND_STATUS (CMD13), the
erase timeout calculations/handling as documented in specifications
are entirely ignored so far, the MMC layer doesn't provide timeouts
applicable up to the bridge drivers and at least sdhci(4) currently
is hardcoding 1 s as timeout for all command types unconditionally.
Let alone already available return codes often not being checked in
the MMC layer ...
- Add an IOCTL interface to mmcsd(4); this is sufficiently compatible
with Linux so that the GNU mmc-utils can be ported to and used with
FreeBSD (note that due to the remaining deficiencies outlined above
SANITIZE operations issued by/with `mmc` currently most likely will
fail). These latter will be added to ports as sysutils/mmc-utils in
a bit. Among others, the `mmc` tool of the GNU mmc-utils allows for
partitioning eMMC devices (tested working).
- For devices following the eMMC specification v4.41 or later, year 0
is 2013 rather than 1997; so correct this for assembling the device
ID string properly.
- Let mmcsd.ko depend on mmc.ko. Additionally, bump MMC_VERSION as at
least for some of the above a matching pair is required.
- In the ACPI front-end of sdhci(4) describe the Intel eMMC and SDXC
controllers as such in order to match the PCI one.
Additionally, in the entry for the 80860F14 SDXC controller remove
the eMMC-only SDHCI_QUIRK_INTEL_POWER_UP_RESET.
OKed by: imp
Submitted by: ian (mmc_switch_status() implementation)
Since the state name is an optional argument, it often can conflict
with other options. To avoid ambiguity now the state name must be
prefixed with a colon.
Obtained from: Yandex LLC
MFC after: 2 week
Sponsored by: Yandex LLC
Some of the modifications from the previous summer of code has been integrated
Modification for compatibility with GNU diff output has been added
Main difference with OpenBSD:
Implement multiple GNU diff options:
* --ignore-file-name-case
* --no-ignore-file-name-case
* --normal
* --tabsize
* --strip-trailing-cr
Make diff -p compatible with GNU diff
Implement diff -l
Make diff -r compatible with GNU diff
Capsicumize diffing 2 regular files
Add a simple test suite
Approved by: AsiaBSDcon devsummit
Obtained from: OpenBSD, GSoC
Relnotes: yes
Bring back the i486 option in GENERIC by default.
The code related to i386 CPU variants configuration has received many
changes in the last years: most of the features are detected automatically,
so there are no performance penalties from keeping the 486 support enabled.
Re-instate the 486 support: while the general configuration could still be
cleaned a bit, there is no advantage in removing it.
Differential Revision: https://reviews.freebsd.org/D9879
- em(4) igb(4) and lem(4)
- deprecate the igb device from kernel configurations
- create a symbolic link in /boot/kernel from if_em.ko to if_igb.ko
Devices tested:
- 82574L
- I218-LM
- 82546GB
- 82579LM
- I350
- I217
Please report problems to freebsd-net@freebsd.org
Partial review from jhb and suggestions on how to *not* brick folks who
originally would have lost their igbX device.
Submitted by: mmacy@nextbsd.org
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Limelight Networks and Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8299
vmpage requires struct pmap to exist and contain a pm_stats field. As of
r308817, either AIM or BOOKE is required to be set in order to get their
respective pmap structs. Rather than expose them both, or try to unify them
unnecessarily, add a third option which contains only a pm_stats field, and
change the two existing pmap structures to place the common fields at the
beginning of the struct. This actually fixes the stats collection by libkvm on
AIM hardware, because before it was accessing a possibly different offset, which
would cause it to read garbage.
Bump __FreeBSD_version to denote this ABI change, so that ports which depend on
libkvm can be rebuilt.
Summary:
The hardware does not expose a classic SMBus interface.
Instead it has a lower level interface that can express a far richer
I2C protocol than what smbus offers. However, the interface does not
provide a way to explicitly generate the I2C stop and start conditions.
It's only possible to request that the stop condition is generated
after transferring the next byte in either direction. So, at least
one data byte must always be transferred.
Thus, some I2C sequences are impossible to generate, e.g., an equivalent
of smbus quick command (<start>-<slave addr>-<r/w bit>-<stop>).
At the same time isl(4) and cyapa(4) are moved to iicbus and now they use
iicbus_transfer for communication. Previously they used smbus_trans()
interface that is not defined by the SMBus protocol and was implemented
only by ig4(4). In fact, that interface was impossible to implement
for the typical SMBus controllers like intpm(4) or ichsmb(4) where
a type of the SMBus command must be programmed.
The plan is to remove smbus_trans() and all its uses.
As an aside, the smbus_trans() method deviates from the standard,
but perhaps backwards, FreeBSD convention of using 8-bit slave
addresses (shifted by 1 bit to the left). The method expects
7-bit addresses.
There is a user facing consequence of this change.
A user must now provide device hints for isl and cyapa that specify an iicbus to use
and a slave address on it.
On Chromebook hardware where isl and cyapa devices are commonly found
it is also possible to use a new chromebook_platform(4) driver that
automatically configures isl and cyapa devices. There is no need to
provide the device hints in that case,
Right now smbus(4) driver tries to discover all slaves on the bus.
That is very dangerous. Fortunately, the probing code uses smbus_trans()
to do its job, so it is really enabled for ig4 only.
The plan is to remove that auto-probing code and smbus_trans().
Tested by: grembo, Matthias Apitz <guru@unixarea.de> (w/o
chromebook_platform)
Discussed with: grembo, imp
Reviewed by: wblock (docs)
MFC after: 1 month
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D8172
prominently. Unlike in the past (dating back to the 4.x branch point),
you cannot upgrade from any point on the past couple of stable
branches to -current. Due to a bug in clang that existed before
r286035 in stable/9 or r286033 in stable/10, we cannot compile llvm
that's in 11.x or -current. Unfortunately, these revisions are after
9.3R and 10.3R on their respective branches. stable/11 and 11.0R are
not affected.
This also affects the upgrade path to 11 (including 11.0R) from
stable/9 and stable/10 (which would otherwise work, were it not for
this bug).
We also need to amend the 11.0R release notes.
MFC After: 3 days
GNU rcs is still available as a package:
- rcs: Latest GPLv3 GNU rcs version.
- rcs57: Copy of the latest version of GNU rcs (GPLv2) from base.
Relnotes: yes
to add actions that run when a TCP frame is sent or received on a TCP
session in the ESTABLISHED state. In the base tree, this functionality is
only used for the h_ertt module, which is used by the cc_cdg, cc_chd, cc_hd,
and cc_vegas congestion control modules.
Presently, we incur overhead to check for hooks each time a TCP frame is
sent or received on an ESTABLISHED TCP session.
This change adds a new compile-time option (TCP_HHOOK) to determine whether
to include the hhook(9) framework for TCP. To retain backwards
compatibility, I added the TCP_HHOOK option to every configuration file that
already defined "options INET". (Therefore, this patch introduces no
functional change. In order to see a functional difference, you need to
compile a custom kernel without the TCP_HHOOK option.) This change will
allow users to easily exclude this functionality from their kernel, should
they wish to do so.
Note that any users who use a custom kernel configuration and use one of the
congestion control modules listed above will need to add the TCP_HHOOK
option to their kernel configuration.
Reviewed by: rrs, lstewart, hiren (previous version), sjg (makefiles only)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D8185
In FreeBSD 11 ELF Tool Chain's elfcopy is installed as objcopy by
default, with the option to switch back to GNU objcopy by setting
WITHOUT_ELFCOPY_AS_OBJCOPY in make.conf.
We plan to remove the outdated in-tree binutils in FreeBSD 12, so
remove the temporary transition aid.
Reviewed by: brooks, imp
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7337
All remaining tools using rcs has been switched to directly use diff3(1):
- etcupdate(8)
- freebsd-update(8)
Note that the ident(1) tool is been already replaced long ago with a BSD
licensed version, as such it remains installed.
GNU rcs is still available from ports:
- rcs: newer GPLv3 version
- rcs57: the latest version from base (GPLv2)
In preparation for the removal of GNU rcs from base, remove the backup_uses_rcs
functionality from the rc.subr backup_file feature. This functionnality was off
by default
Reviewed by: wblock
Differential Revision: https://reviews.freebsd.org/D7883
Split the QUEUE_MACRO_DEBUG into QUEUE_MACRO_DEBUG_TRACE and
QUEUE_MACRO_DEBUG_TRASH.
Add the debug macrso QMD_IS_TRASHED() and QMD_SLIST_CHECK_PREVPTR().
Document these in queue.3.
Reviewed by: emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D3984
in_broadcast() can be quite expensive, so skip calling it if the
incoming mbuf wasn't sent to a broadcast L2 address in the first
place.
Reviewed by: gnn
MFC after: 2 months
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D7309
sys/cam/scsi/scsi_xpt.c
Strip leading spaces off of a SCSI disk's reported serial number
when populating the CAM serial number. This affects the output of
"diskinfo -v" and the names of /dev/diskid/DISK-* device nodes,
among other things.
SPC5r05 says that the Product Serial Number field from the Unit
Serial Number VPD page is right-aligned. So any leading spaces are
not part of the actual serial number. Most devices don't left-pad
their serial numbers, but some do. In particular, the SN VPD page
that an LSI HBA emulates for a SATA drive contains enough
left-padding to fill a 20-byte field.
UPDATING
Add a note to UPDATING, because some users may have to update
/etc/fstab or geom labels.
Reviewed by: ken, mav
MFC after: Never
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6516
Add a bit_count function, which efficiently counts the number of bits set in
a bitstring.
sys/sys/bitstring.h
tests/sys/sys/bitstring_test.c
share/man/man3/bitstring.3
Add bit_alloc
sys/kern/subr_unit.c
Use bit_count instead of a naive counting loop in check_unrhdr, used
when INVARIANTS are enabled. The userland test runs about 6x faster
in a generic build, or 8.5x faster when built for Nehalem, which has
the POPCNT instruction.
sys/sys/param.h
Bump __FreeBSD_version due to the addition of bit_alloc
UPDATING
Add a note about the ABI incompatibility of the bitstring(3)
changes, as suggested by lidl.
Suggested by: gibbs
Reviewed by: gibbs, ngie
MFC after: 9 days
X-MFC-With: 299090, 300538
Relnotes: yes
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D6255
Specification, Version 2, but marked as legacy, and have been removed from
later specifications. After 12 years it is time to remove them from new
architectures when the main use for sbrk is an invalid method to attempt
to find how much memory has been allocated from malloc.
There are a few places in the tree that still call sbrk, however they are
not used on arm64. They will need to be fixed to cross build from arm64,
but these will be fixed in a follow up commit.
Old copies of binutils from ports called into sbrk, however this has been
fixed around 6 weeks ago. It is advised to update binutils on arm64 before
installing a world that includes this change.
Reviewed by: brooks, emaste
Obtained from: brooks
Relnotes: yes
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D6464
Kernel installs always override KMODDIR when installing modules, so
this default setting is only used for standalone module builds. Many
out-of-tree modules manually override KMODDIR already to avoid placing
modules in /boot/kernel. This now makes that behavior the default.
Discussed on: arch@
Reviewed by: imp
Relnotes: yes
On some architectures, u_long isn't large enough for resource definitions.
Particularly, powerpc and arm allow 36-bit (or larger) physical addresses, but
type `long' is only 32-bit. This extends rman's resources to uintmax_t. With
this change, any resource can feasibly be placed anywhere in physical memory
(within the constraints of the driver).
Why uintmax_t and not something machine dependent, or uint64_t? Though it's
possible for uintmax_t to grow, it's highly unlikely it will become 128-bit on
32-bit architectures. 64-bit architectures should have plenty of RAM to absorb
the increase on resource sizes if and when this occurs, and the number of
resources on memory-constrained systems should be sufficiently small as to not
pose a drastic overhead. That being said, uintmax_t was chosen for source
clarity. If it's specified as uint64_t, all printf()-like calls would either
need casts to uintmax_t, or be littered with PRI*64 macros. Casts to uintmax_t
aren't horrible, but it would also bake into the API for
resource_list_print_type() either a hidden assumption that entries get cast to
uintmax_t for printing, or these calls would need the PRI*64 macros. Since
source code is meant to be read more often than written, I chose the clearest
path of simply using uintmax_t.
Tested on a PowerPC p5020-based board, which places all device resources in
0xfxxxxxxxx, and has 8GB RAM.
Regression tested on qemu-system-i386
Regression tested on qemu-system-mips (malta profile)
Tested PAE and devinfo on virtualbox (live CD)
Special thanks to bz for his testing on ARM.
Reviewed By: bz, jhb (previous)
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D4544
As of r295661 elfcopy supports PE format for EFI boot binaries and is a
viable objcopy implementation for the base system and ports.
The (temporary) src.conf knob WITHOUT_ELFCOPY_AS_OBJCOPY knob may be set
to obtain the GNU version if necessary.
PR: 207091 [exp-run]
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Change 294329 removed the ability to build ZFS pools that are backed by
zvols, because having that ability (even if it's not used) leads to
deadlocks. By popular demand, I'm adding an off-by-default sysctl to
reenable that ability.
Reviewed by: lidl, delphij
MFC after: Never
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D4998
This commit, fix a core dump on ypldap(8) related with memory allocation.
Also an example of how to set the ypldap.conf(5) properly is added to
examples files.
A new user _ypldap is required to be able to run ypldap(8) as well as
in a chroot mode.
Reviewed by: rodrigc (mentor), bjk
Approved by: bapt (mentor)
Relnotes: Yes
Sponsored by: gandi.net
Differential Revision: https://reviews.freebsd.org/D4744
pxeboot in tftp loader mode (when built with LOADER_TFTP_SUPPORT) now
prefix all the path to open with the path obtained via the option 'root-path'
directive.
This allows to be able to use the traditional content /boot out of box. Meaning
it now works pretty much like all other loaders. It simplifies hosting hosting
multiple version of FreeBSD on a tftp server.
As a consequence, pxeboot does not look anymore for a pxeboot.4th (which was
never provided)
Note: that pxeboot in tftp loader mode is not built by default.
Reviewed by: rpokala
Relnotes: yes
Sponsored by: Gandi.net
Differential Revision: https://reviews.freebsd.org/D4590
Debug data files are now built by default with 'make buildworld' and
installed with 'make installworld'. This facilitates debugging but
requires more disk space both during the build and for the installed
world. Debug files may be disabled by setting WITHOUT_DEBUG_FILES=yes
in src.conf(5).
Reviewed by: bdrewery, eadler, vangyzen
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4018
Say it with me, "I will not chain commands with && in Makefiles"
This was originally fixed and explained quite well by bde@ in r36074. The
initial bmake integration caused 'set -e' to stop being used which lead to
r252419. Later 'set -e' expectations were fixed with bmake in r254980.
Because of the && here, errors would be ignored when building in parallel and
a dependency failed. Such as bootstrap-tools since it builds everything in
parallel. If any tool failed in obj/depend/all, it would just ignore the error
and continue to build. This later would result in cascaded errors that only
confused the real issue. This could also cause commands after the failed
command to still execute, leading to more confusion.
This should be fine if the command is in a sub-shell such as: (cmd1 && cmd2)
This reverts r252419.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
inconsistency when installing new locales and may also result in failures
when reinstalling after having run make delete-old (due to previous
inconsistencies) for now recommand removing all locales until install(1) is
fixed
Bmake has a documented feature of '-N' to skip executing commands which is
specifically intended for debugging top-level builds and not recursing into
sub-directories. This matches the older 'make -n' behavior we added which made
'-n -n' the recursing target and '-n' a non-recursing target.
Removing the '-n -n' feature allows the build to work as documented in
the bmake manpage with '-n' and '-N'. The older '-n -n' feature was also
not documented anywhere that I could see.
Note that the ${_+_} var is still needed as currently bmake incorrectly
executes '+' commands when '-N' is specified.
The '-n' and '-n -n' features were broken for several reasons prior to this.
r251748 made '_+_' never expand with '-n -n' which resulted in many
sub-directories not being visited until fixed 2 years later in r288391, and
many targets were given .MAKE over the past few years which resulted in
non-sub-make commands, such as rm and ln and mtree, to be executed.
This should also allow removing some indirection hacks in bsd.subdir.mk and
other cases of .USE that have a .MAKE by using '+'.
Sponsored by: EMC / Isilon Storage Division
Discussed on: arch@ (mostly silence)
target. This is the feeder for mergemaster / etcupdate. This change
makes installworld/mergemaster/etcupdate behave the same regardless of
whether SENDMAIL_MC or SENDMAIL_CF is used.
If you use a custom SENDMAIL_MC/CF in make.conf and excluded it from
mergemaster.rc/etcupdate.conf to work around the conflicts, you may wish
to revert that or change it from 'ignore' to 'always install'.
If you do not use a custom SENDMAIL_MC/CF, there should be no change in
behavior.
This avoids needing a large boot partition / file system in order to
accommodate multiple kernels, and provides consistency with userland
debug. This also simplifies the process of moving kernel debug files
to a separate package and installing them on demand.
In addition, change kernel debug file extension to .debug, to match
userland debug files.
When using the supported kernel installation method the
/usr/lib/debug/boot/kernel directory will be renamed (to kernel.old)
as is done with /boot/kernel.
Developers wishing to maintain the historical behavior of installing
debug files in /boot/kernel/ can set KERN_DEBUGDIR="" in src.conf(5).
Reviewed by: bdrewery, brooks, imp, markj
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1006
The crop/drop-ovl fragment scrub modes are not very useful and likely to confuse
users into making poor choices.
It's also a fairly large amount of complex code, so just remove the support
altogether.
Users who have 'scrub fragment crop|drop-ovl' in their pf configuration will be
implicitly converted to 'scrub fragment reassemble'.
Reviewed by: gnn, eri
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D3466
if desired.
Retire randomdev_none.c and introduce random_infra.c for resident
infrastructure. Completely stub out random(4) calls in the "without
DEV_RANDOM" case.
Add RANDOM_LOADABLE option to allow loadable Yarrow/Fortuna/LocallyWritten
algorithm. Add a skeleton "other" algorithm framework for folks
to add their own processing code. NIST, anyone?
Retire the RANDOM_DUMMY option.
Build modules for Yarrow, Fortuna and "other".
Use atomics for the live entropy rate-tracking.
Convert ints to bools for the 'seeded' logic.
Move _write() function from the algorithm-specific areas to randomdev.c
Get rid of reseed() function - it is unused.
Tidy up the opt_*.h includes.
Update documentation for random(4) modules.
Fix test program (reviewers, please leave this).
Differential Revision: https://reviews.freebsd.org/D3354
Reviewed by: wblock,delphij,jmg,bjk
Approved by: so (/dev/random blanket)
The option was added only to ease the transition from GNU Binutils to
ELF Tool Chain tools, and that process is now complete (for the viable
replacements). Noting the removal in UPDATING is sufficient as we have
not shipped a release with the option.
Reviewed by: brooks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3240
devices in /dev/dri/ with this new group.
This will allow ports and users to more easily access to these devices
for OpenGL and OpenCL support.
Reviewed by: dumbbell@
Approved by: dumbbell@
Differential Revision: https://reviews.freebsd.org/D1260
There have been .local version of each for user modifications for some time
This allows users to receive future updates to these files
PR: 183765
Submitted by: Bertram Scharpf, Nikolai Lifanov (patch)
Reviewed by: dteske, loos, eadler
Approved by: bapt (mentor)
MFC after: 1 month
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3176
As ZFS requires a more kernel stack pages than is the default on some
architectures e.g. i386, warn if KSTACK_PAGES is less than
ZFS_MIN_KSTACK_PAGES (which is 4 at the time of writing).
MFC after: 3 days
Sponsored by: Multiplay
* GENERAL
- Update copyright.
- Make kernel options for RANDOM_YARROW and RANDOM_DUMMY. Set
neither to ON, which means we want Fortuna
- If there is no 'device random' in the kernel, there will be NO
random(4) device in the kernel, and the KERN_ARND sysctl will
return nothing. With RANDOM_DUMMY there will be a random(4) that
always blocks.
- Repair kern.arandom (KERN_ARND sysctl). The old version went
through arc4random(9) and was a bit weird.
- Adjust arc4random stirring a bit - the existing code looks a little
suspect.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Redo read_random(9) so as to duplicate random(4)'s read internals.
This makes it a first-class citizen rather than a hack.
- Move stuff out of locked regions when it does not need to be
there.
- Trim RANDOM_DEBUG printfs. Some are excess to requirement, some
behind boot verbose.
- Use SYSINIT to sequence the startup.
- Fix init/deinit sysctl stuff.
- Make relevant sysctls also tunables.
- Add different harvesting "styles" to allow for different requirements
(direct, queue, fast).
- Add harvesting of FFS atime events. This needs to be checked for
weighing down the FS code.
- Add harvesting of slab allocator events. This needs to be checked for
weighing down the allocator code.
- Fix the random(9) manpage.
- Loadable modules are not present for now. These will be re-engineered
when the dust settles.
- Use macros for locks.
- Fix comments.
* src/share/man/...
- Update the man pages.
* src/etc/...
- The startup/shutdown work is done in D2924.
* src/UPDATING
- Add UPDATING announcement.
* src/sys/dev/random/build.sh
- Add copyright.
- Add libz for unit tests.
* src/sys/dev/random/dummy.c
- Remove; no longer needed. Functionality incorporated into randomdev.*.
* live_entropy_sources.c live_entropy_sources.h
- Remove; content moved.
- move content to randomdev.[ch] and optimise.
* src/sys/dev/random/random_adaptors.c src/sys/dev/random/random_adaptors.h
- Remove; plugability is no longer used. Compile-time algorithm
selection is the way to go.
* src/sys/dev/random/random_harvestq.c src/sys/dev/random/random_harvestq.h
- Add early (re)boot-time randomness caching.
* src/sys/dev/random/randomdev_soft.c src/sys/dev/random/randomdev_soft.h
- Remove; no longer needed.
* src/sys/dev/random/uint128.h
- Provide a fake uint128_t; if a real one ever arrived, we can use
that instead. All that is needed here is N=0, N++, N==0, and some
localised trickery is used to manufacture a 128-bit 0ULLL.
* src/sys/dev/random/unit_test.c src/sys/dev/random/unit_test.h
- Improve unit tests; previously the testing human needed clairvoyance;
now the test will do a basic check of compressibility. Clairvoyant
talent is still a good idea.
- This is still a long way off a proper unit test.
* src/sys/dev/random/fortuna.c src/sys/dev/random/fortuna.h
- Improve messy union to just uint128_t.
- Remove unneeded 'static struct fortuna_start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
* src/sys/dev/random/yarrow.c src/sys/dev/random/yarrow.h
- Improve messy union to just uint128_t.
- Remove unneeded 'staic struct start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
- Fix some magic numbers elsewhere used as FAST and SLOW.
Differential Revision: https://reviews.freebsd.org/D2025
Reviewed by: vsevolod,delphij,rwatson,trasz,jmg
Approved by: so (delphij)
really need it can find it in the devel/fmake port or pkg install fmake.
Note: This commit is orthogonal to the question 'can we fmake buildworld'.
Differential Revision: https://reviews.freebsd.org/D2840
files to vendor-provided ones. It should make easier to adopt platform
code to new revisions of hardware and to use DTS overlays for various
Beaglebone extensions (shields/capes).
Original dts filenames were not changed, they're now wrappers over dts
files provided by TI. So make sure you update .dtb files on your
devices as part of kernel update
GPIO addressing was changed: instead of one global /dev/gpioc0 there
are per-bank instances of /dev/gpiocX. Each bank has 32 pins so for
instance pin 121 on /dev/gpioc0 in old addressing scheme is now pin 25
on /dev/gpioc3
On Pandaboard serial console devices was changed from /dev/ttyu0 to
/dev/ttyu2 so you'll have to update /etc/ttys to get login prompt
on serial port in multiuser mode. Single user mode serial console
should work as-is
Differential Revision: https://reviews.freebsd.org/D2146
Reviewed by: rpaulo, ian, Michal Meloun, Svatopluk Kraus
executables. The goal here, not yet accomplished, is to let the e500 kernel
run under QEMU by setting KERNBASE to something that fits in low memory and
then having the kernel relocate itself at runtime.
it processes its own ELF relocations and can be loaded and run in place at
any physical/virtual address.
NB: This requires an updated loader to boot!
Relnotes: yes
These tools are now from the ELF Tool Chain project:
* addr2line
* elfcopy (strip)
* nm
* size
* strings
The binutils versions are available by setting in src.conf:
WITHOUT_ELFTOOLCHAIN_TOOLS=yes
Thanks to antoine@ for multiple exp-runs and diagnosing many of the
failures.
PR: 195561 (ports exp-run)
Sponsored by: The FreeBSD Foundation
To be able to info pages consider installing texinfo from ports print/texinfo or
via pkg: pkg install texinfo
Differential Revision: https://reviews.freebsd.org/D1409
Reviewed by: emaste, imp (previous version)
Relnotes: yes
have chosen different (and more traditional) stateless/statuful
NAT64 as translation mechanism. Last non-trivial commits to both
faith(4) and faithd(8) happened more than 12 years ago, so I assume
it is time to drop RFC3142 in FreeBSD.
No objections from: net@
vt(4) is a new console driver which brings features such as:
o Support for Unicode and double-width characters
o Integration with the KMS kernel video drivers
o Support for UEFI
You may need to update your console settings in /etc/rc.conf, most
probably the keymap. During boot, /etc/rc.d/syscons will indicate what
you need to do.
vt(4) still has issues and lacks some features compared to syscons(4).
See the wiki for up-to-date information:
https://wiki.freebsd.org/Newcons
If you want to keep using syscons(4), you can do so by adding the
following line to /boot/loader.conf:
kern.vty=sc
Differential Revision: https://reviews.freebsd.org/D1005
Discussed with: emaste@, nwhitehorn@, ray@
Relnotes: yes
pjdfstest execution is opt-in and must be done as root due to some of the
assumptions made by the test suite and lack of error checking in the non-root
case
A description of how to execute pjdfstest with kyua is provided in
share/pjdfstest/README
Phabric: D824 (an earlier prototype patch)
MFC after: 1 month
Relnotes: yes
Sponsored by: EMC / Isilon Storage Division
gperf is used as a build tool for g++ and is not needed for Clang
architectures. Ports and third-party software that need it can use the
up-to-date devel/gperf port.
PR: 194103 (exp-run)
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D886
- Remove tools/regression/pjdfstest
- Add upgrade directions for contrib/pjdfstest
- Add a note to UPDATING for the move (the reachover Makefiles are coming
soon)
Functional differences:
- ftruncate testcases are added from upstream (github)
Non-functional differences:
- The copyright for the project has been updated to 2012
- pjd's contact information has been updated
Discussed with: -testing, jmmv, pjd
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
framebuffer drivers. This lets ofwfb work with xf86-video-scfb and makes
the driver much more generic and less PCI-centric. This changes some
user-visible behavior and will require updates to the xorg-server port
on PowerPC when using ATI graphics cards.
