Commit Graph

155 Commits

Author SHA1 Message Date
swallace
d3b9df0ced Change device entry examples to reflect the following:
Remove PAS-only entry for OPL as ache pointed out.
Update OPL comment to show OPL-2 or OPL-3 support as it is auto-detected.
1995-03-13 18:49:37 +00:00
swallace
d3db38add4 Remove old snd file configuration list and add new file list
for the snd controller and the different sound devices.

Update LINT to include all sound device drivers using new format.

Reviewed by:	wollman
1995-03-12 23:43:15 +00:00
bde
d26caae19b Fix config-time syntax errors in sound options. 1995-03-12 12:18:43 +00:00
ugen
dbb6d219cb Restore IPACCT out there.. 1995-03-06 10:33:34 +00:00
joerg
aad435dabc pcvt is still using the XSERVER option; document this. 1995-03-05 22:23:35 +00:00
jkh
fb37701122 Upgrade the sound drivers to VoxWare pre-3.0 and fix a number of bugs.
Make the sound configuration a little neater
	(see /sys/i386/isa/sound/Readme.freebsd)
Add support for the Microsoft Sound Source.
Document the sound options again.
Submitted by:	Sujal Patel <smpatel@wam.umd.edu>
Obtained from:	Voxware
1995-03-04 21:11:21 +00:00
jkh
210fe3dddd Changes to incorporate the Matsushita CDROM driver (otherwise known as
the "Sound blaster CDROM").
Submitted by:	Frank Durda IV <bsdmail@nemesis.lonestar.org>
1995-03-02 04:07:03 +00:00
dufault
ee28b29ea8 Added a little documentation on the fixed SCSI config and
fixed a few quirks that snuck in.
1995-03-01 22:27:45 +00:00
bde
b52ab728d0 Make diskslice files standard and remove option DISKSLICE. ufs_disksubr.c
needed a diskslice function yesterday and all disk drivers will need it.
The diskslice initialization routine should be configurable (but isn't).
1995-02-23 17:19:54 +00:00
jkh
46a9bdb15f Remove the SCSI idsn line - it's permanantly dead. 1995-02-19 14:07:28 +00:00
jkh
8329459c37 Remove the ISDN dialer from LINT until it's working. 1995-02-17 09:33:29 +00:00
phk
07489c563c This is the latest version of the APM stuff from HOSOKAWA, I have looked
briefly over it, and see some serious architectural issues in this stuff.

On the other hand, I doubt that we will have any solution to these issues
before 2.1, so we might as well leave this in.

Most of the stuff is bracketed by #ifdef's so it shouldn't matter too much
in the normal case.

Reviewed by:	phk
Submitted by:	HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
1995-02-17 02:22:57 +00:00
jkh
b6fed9e68a We can enable pcd0 when we actually have one. 1995-02-15 06:18:15 +00:00
jkh
73ffdb981c Comment out snic0 until it gets updated to the newer scsi code. 1995-02-15 04:49:18 +00:00
jkh
f4705baefc Add ISDN entries to LINT. 1995-02-15 00:53:15 +00:00
ugen
1cf892686a pseudo-device snp 3
Example entry for snoop.
1995-02-14 21:15:12 +00:00
jkh
86d0c26995 Pick a more sensible default for # of ptys, add comment that this can
go as high as 64 now.
1995-02-12 09:29:59 +00:00
amurai
9e67759149 Delete a redundant line - "options TUN" and Add explanation for
"pseudo-device tun" as same as other device.
1995-02-10 05:42:24 +00:00
jkh
e0092e86d6 Add the Cyclades serial driver code (ALPHA) from Andrew Werple and
adapted to FreeBSD by Heikki Suonsivu <hsu@cs.hut.fi>.
Submitted by:	Andrew Werple <andrew@werple.apana.org.au> and
		Heikki Suonsivu <hsu@cs.hut.fi>
Obtained from:	NetBSD
1995-02-09 09:47:31 +00:00
jkh
630cf84ab0 The very minimum driver required to support a Video Spigot. See the
copyright notices in the code for information on where to go to pick
up additional useful bits.
Submitted by:	Jim Lowe <james@blatz.cs.uwm.edu>
1995-02-06 23:19:49 +00:00
jkh
f2a7d967ea Bring PCVT's config files into the tree.
Submitted by:	mh
1995-02-05 10:56:47 +00:00
amurai
ac12d39d2e Add Tunnel device for ppp (iijppp) 1995-01-31 06:33:58 +00:00
ache
e4eb694f82 Describe default MAXCONS value: 12 1995-01-30 14:40:06 +00:00
phk
35898da3bf New and far better NCR5380/NCR53400 scsi-driver.
Handles at least Trantor T130 and ProAudioSpectrum adapters.
The pas driver has consequently been removed.
This driver can be configured without without interrupts.

Manpage to follow when PAS16 has been edited in.

Reviewed by:	phk
Submitted by:	Serge Vakulenko, <vak@cronyx.ru>
1995-01-27 07:49:19 +00:00
ache
ced54f5094 MAXCONS option described 1995-01-26 11:00:12 +00:00
ache
30c878fd5e Remove FAT_CURSOR, it is already non-existent during several
last syscons versions
1995-01-26 05:04:37 +00:00
bde
802677cea8 Load the kernel symbol table in the boot loader and not at compile time.
(Boot with the -D flag if you want symbols.)

Make it easier to extend `struct bootinfo' without losing either forwards
or backwards compatibility.

ddb_aout.c:
Get the symbol table from wherever the loader put it.
Nuke db_symtab[SYMTAB_SPACE].

boot.c:
Enable loading of symbols.  Align them on a page boundary.  Add printfs
about the symbol table sizes.
Pass the memory sizes to the kernel.
Fix initialization of `unit' (it got moved out of the loop).
Fix adding the bss size (it got moved inside an ifdef).
Initialize serial port when RB_SERIAL is toggled on.
Fix comments.
Clean up formatting of recently added code.

io.c:
Clean up formatting of recently added code.

netboot/main.c, machdep.c, wd.c:
Change names of bootinfo fields.

LINT:
Nuke SYMTAB_SPACE.
Fix comment about DODUMP.

Makefile.i386:
Nuke use of dbsym.
Exclude gcc symbols from kernel unless compiling with -g.
Remove unused macro.
Fix comments and formatting.

genassym.c:
Generate defines for some new bootinfo fields.  Change names of old ones.

locore.s:
Copy only the valid part of the `struct bootinfo' passed by the loader.
Reserve space for symbol table, if any.

machdep.c:
Check the memory sizes passed by the loader, if any.  Don't use them yet.

bootinfo.h:
Add a size field so that we can resolve some mismatches between the loader
bootinfo and the kernel boot info.  The version number is not so good for
this because of historical botches and because it's harder to maintain.
Add memory size and symbol table fields.  Change the names of everything.

Hacks to save a few bytes:

asm.S, boot.c, boot2.S:
Replace `ouraddr' by `(BOOTSEG << 4)'.

boot.c:
Don't statically initialize `loadflags' to 0.  Disable the "REDUNDANT"
code that skips the BIOS variables.  Eliminate `total'.  Combine some
more printfs.

boot.h, disk.c, io.c, table.c:
Move all statically initialzed data to table.c.

io.c:
Don't put the A20 gate bits in a variable.
1995-01-25 21:40:47 +00:00
jmz
cfe92acba3 Add: device joy0 at isa? port "IO_GAME" (joystick) 1995-01-25 20:35:14 +00:00
paul
ffce7eccf3 is to lnc changes 1995-01-24 20:38:39 +00:00
jkh
a504b09724 Add support for Olof Johansson's WD7000 driver.
Submitted by:	Olof Johansson <offe@ludd.luth.se>
Obtained from:
1995-01-23 00:25:03 +00:00
jkh
4d936778eb Put UCONSOLE back - I was wrong, it's still used in one last place.
Submitted by:	ollivier
1995-01-14 02:39:22 +00:00
jkh
5f3297e594 1. Remove UCONSOLE. This appears to be well and truly dead (unless it's
hiding someplace in /sys I can't find).
2. Remove NCONS.  Soren's latest changes make it a no-op.
1995-01-12 15:37:16 +00:00
jkh
7acc81dc27 Gunther Schadow <gusw@fub46.zedat.fu-berlin.de>'s
driver for the Genius GS-4500 hand scanner.
Submitted by:	gusw@fub46.zedat.fu-berlin.de
1995-01-07 14:52:08 +00:00
ats
2372cc8a21 Add examples for the sony and the panasonic drivers. 1994-12-26 17:33:52 +00:00
wollman
ad03fd1aa1 Added `ds', a black-hole network interface. 1994-12-22 21:00:05 +00:00
jkh
a9c805c066 Bump LINT's symtab space. 1994-12-17 08:37:22 +00:00
jkh
2deb66393d Add Fred Cawthorne's GPIB driver.
Submitted by:	fcawth@delphi.umd.edu
1994-12-17 08:07:03 +00:00
bde
348d826769 Uncomment DISKSLICE; it should work now (for drivers that support it). 1994-12-16 16:58:08 +00:00
phk
1fd36e21b2 Remove sd1-sd3 & st1, now that we can autoallocate them.
fix the vn driver in LINT.  It autoallocates too.

Reviewed by:	phk
Submitted by:	rgrimes
1994-12-16 06:04:16 +00:00
wollman
50e1db60c0 Add ahc driver, more symtab space. 1994-12-13 22:01:35 +00:00
wollman
a85aedfaee Delete `HZ' option; it's only of use to Bruce and screws up the NTP PLL
(among other things).  Correctly specify `vn' as a pseudo.  Make sure
things are in the right places.
1994-12-13 20:56:30 +00:00
bde
45a51392c3 Add old options HZ, VN, ALLOW_CONFLICT_DRQ, ALLOW_CONFLICT_MEMADDR,
AUTO_EOI_1, AUTO_EOI_2, COMCONSOLE, COM_MULTIPORT.

Add new option DISKSLICE.

Change comments about DUMMY_NOPS.
1994-12-11 23:52:18 +00:00
ats
4b0890d515 Document the options DUMMY_NOPS and TUNE_1542. 1994-12-11 00:09:34 +00:00
smace
e0d9f53e10 Make CHILD_MAX and OPEN_MAX a tunable parameter. 1994-12-03 17:36:37 +00:00
wollman
8be5d8932d Add Cronyx/Sigma files and config information; delete outdated config files. 1994-12-03 00:17:55 +00:00
ats
3618ae5282 Expand again the SYMTAB_SPACE for LINT. 1994-11-27 14:59:54 +00:00
se
e55fbafa80 Added #define PROBE_VERBOSE and description (PCI chip set boot messages)
Reviewed by:
Submitted by:
Obtained from:
1994-11-24 20:35:21 +00:00
bde
e8bd9bf0b4 The SYMTAB_SPACE bloatometer was 40% out of date. 1994-11-15 14:28:46 +00:00
jkh
2c19c24df5 Add back ze0 driver; somebody took it out of _both_ LINT and GENERIC,
kinda hosing the laptop folks.
1994-11-08 07:39:28 +00:00
phk
9939a83c59 Added a kernel variable, "dodump" defaulting to zero, which disables dumps.
Somebody should make a mib variable for it.
Just now it is pointless to dump the kernel, since we have nothing which
can read the dump.
Furthermore is should never be the default to dump.
	options	DODUMP
will enable dumps.
1994-11-07 03:51:32 +00:00