* This hopefully avoids some firmware panics, I was occasionally seeing,
when iwm disconnects upon losing signal to an access point at some point.
* This is synchronizing the if_iwm_time_event.c file a bit more from the
corresponding Linux iwlwifi/mvm/time-event.c.
Taken-From: Linux iwlwifi
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (e8cb71584a6a72232c13151d60e57f7f229220eb)
* This is a mix of the OpenBSD Git 7fd9664469d1b717a307eebd74aeececbd3c41cc
change, and syncing with the Linux iwlwifi code.
Taken-From: Linux iwlwifi, and OpenBSD
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (706a3044afd27c3fecfdf57bec1695310e53e228)
* This avoids firmware resets in all the cases in iwm_newstate(). Instead
iwm_bring_down_firmware() is called, which tears down all the STA
connection state, according to the sc->sc_firmware_state value.
* Improve the behaviour of the LED blinking a bit, so it only blinks when
there really is a wireless scan going on.
* Print the newstate arg in debug output of iwm_newstate(), to help in
debugging.
This is inspired by the firmware state maintaining change in OpenBSD's iwm,
by stsp@openbsd.org (OpenBSD Git 0ddb056fb7370664b1d4b84392697cb17d1a414a).
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (8a41b10ac639d0609878696808387a6799d39b57)
* While there remove unused IWM_UCODE_TLV_CAPA_LMAC_UPLOAD definition,
which isn't defined in iwlwifi.
Taken-From: Linux iwlwifi
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (fd4f9de8bc72ea961e50829b45b59d0549040b7d)
* Remove outdated notifications IWM_SCAN_ABORT_CMD,
IWM_SCAN_START_NOTIFICATION and IWM_SCAN_RESULTS_NOTIFICATION.
* Remove unused enum iwm_scan_complete_status.
* Use the updated FW Api version 3 of struct iwm_scan_results_notif.
* No functional change, since struct iwm_scan_results_notif is never
accessed in iwm at the moment.
Taken-From: Linux iwlwifi commits 1083fd7391e989be52022f0f338e9dadc048b063
and 75118fdb63496e4611ab50380499ddd62b9de69f.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (c947b0b8dc96dabefd63f7b70d53695e36c7b64f)
* Rename some structs and struct members for firmware handling.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (4b1006a6e4d0f61d48c67b46e1f791e30837db67)
* There is (almost) nothing to do in suspend/resume if if_iwm has failed
during initialization (e.g. because of firmware load failure) and was
already uninitialized by iwm_detach_local().
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (67b5e090efb225654815fed91020db6cfc16bb19)
* We should load the firmware exactly once before the driver really
initializes the hardware the first time, and unload it at detach time.
There is no need to retrieve the firmware during execution of
iwm_mvm_load_ucode_wait_alive(), we should make sure we already have the
firmware data at hand before that.
* The existing sc_preinit_hook code fails to deal with the case where
if_iwm is loaded by the loader (or is statically linked) and the
firmware needs to be loaded from disk. So we can just call
iwm_read_firmware() from iwm_attach() directly.
* A separate solution will have to be added to properly defer the firmware
loading during bootup, until the necessary filesystem is mounted.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (0104ee1f4cb6a2313c00c2526c6ae98d42e5041d)
* Doing the iwm_prepare_card_hw() call in iwm_attach() only on Family 8000
hardware matches the code in Linux iwlwifi.
* While there remove DEFAULT_MAX_TX_POWER definition which is unused, and
has a value different from IWL_DEFAULT_MAX_TX_POWER in iwlwifi.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (e8560f8dc58df12a7c79a6bb4e6ccb156e001085)
* Rather than providing a non-zero index into the firmware RS table,
we should always use index 0 and update the firmware RS table whenever
our chosen tx rate for data-frames changes.
* Send IWM_LQ_CMD updates when the tx rate gets updated by the net80211
rate control (which is after we tell the tx status to the net80211
rate-control in iwm_mvm_rx_tx_cmd_single()).
* Disregard frames transferred with a different tx rate than the currently
selected rate for the rate-control calculations. This way we avoid
counting management frames (which are sent at a slow, and fixed rate),
as well as frames we added to the tx queue just before a new IWM_LQ_CMD
update took effect.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (5d6b465e288ac5b52d7115688d4e6516acbbea1c)
From Krzysztof:
Ensure that the entire data buffer passed from the NVM update tool is copied in
to kernel space and copied back out to user space using copyin() and copyout().
PR: 234104
Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reported by: Finn <ixbug@riseup.net>
MFC after: 5 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D18817
From Jake:
In r341156 ("Fix first-packet completion", 2018-11-28) a hack to work
around a delta calculation determining how many descriptors were used
was added to ixl_isc_tx_credits_update_dwb.
The same fix was also applied to the em and igb drivers in r340310, and
to ix in r341156.
The hack checked the case where prev and cur were equal, and then added
one. This works, because by the time we do the delta check, we already
know there is at least one packet available, so the delta should be at
least one.
However, it's not a complete fix, and as indicated by the comment is
really a hack to work around the real bug.
The real problem is that the first time that we transmit a packet,
tx_cidx_processed will be set to point to the start of the ring.
Ultimately, the credits_update function expects it to point to the
*last* descriptor that was processed. Since we haven't yet processed any
descriptors, pointing it to 0 results in this incorrect calculation.
Fix the initialization code to have it point to the end of the ring
instead. One way to think about this, is that we are setting the value
to be one prior to the first available descriptor.
Doing so, corrects the delta calculation in all cases. The original fix
only works if the first packet has exactly one descriptor. Otherwise, we
will report 1 less than the correct value.
As part of this fix, also update the MPASS assertions to match the real
expectations. First, ensure that prev is not equal to cur, since this
should never happen. Second, remove the assertion about prev==0 || delta
!= 0. It looks like that originated from when the em driver was
converted to iflib. It seems like it was supposed to ensure that delta
was non-zero. However, because we originally returned 0 delta for the
first calculation, the "prev == 0" was tacked on.
Instead, replace this with a check that delta is greater than zero,
after the correction necessary when the ring pointers wrap around.
This new solution should fix the same bug as r341156 did, but in a more
robust way.
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: shurd@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D18545
I should have only changed the format qualifier with the `size_t` value,
`length`, not the other [`off_t`] value, `dest_file_size`.
MFC after: 1 month
MFC with: r343362, r343365, r343367
Approved by: emaste (mentor; implicit)
Reported by: gcc 8.x
gcc 8.x is more pedantic than clang 7.x with format strings and the tests
passed `void*` variables while supplying `%s` (which is technically
incorrect).
Make the affected `void*` variables use `char*` storage instead to address
this issue, as the compiler will upcast the values to `char*`.
MFC after: 1 month
MFC with: r343362
Approved by: emaste (mentor; implicit)
Reviewed by: asomers
Differential Revision: https://reviews.freebsd.org/D18934
After the afdata read lock was converted to epoch(9), readers could
observe a linked LLE and block on the LLE while a thread was
unlinking the LLE. The writer would then release the lock and schedule
the LLE for deferred free, allowing readers to continue and potentially
schedule the LLE timer. By the point the timer fires, the structure is
freed, typically resulting in a crash in the callout subsystem.
Fix the problem by modifying the lookup path to check for the LLE_LINKED
flag upon acquiring the LLE lock. If it's not set, the lookup fails.
PR: 234296
Reviewed by: bz
Tested by: sbruno, Victor <chernov_victor@list.ru>,
Mike Andrews <mandrews@bit0.com>
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18906
These testcases exercise a number of functional requirements for sendfile(2).
The testcases use IPv4 and IPv6 domain sockets with TCP, and were confirmed
functional on UFS and ZFS. UDP address family sockets cannot be used per the
sendfile(2) contract, thus using UDP sockets is outside the scope of
testing the syscall in positive cases. As seen in
`:s_negative_udp_socket_test`, UDP is used to test the sendfile(2) contract
to ensure that EINVAL is returned by sendfile(2).
The testcases added explicitly avoid testing out `SF_SYNC` due to the
complexity of verifying that support. However, this is a good next logical
item to verify.
The `hdtr_positive*` testcases work to a certain degree (the header
testcases pass), but the trailer testcases do not work (it is an expected
failure). In particular, the value received by the mock server doesn't match
the expected value, and instead looks something like the following (using
python array notation):
`trailer[:]message[1:]`
instead of:
`message[:]trailer[:]`
This makes me think there's a buffer overrun issue or problem with the
offset somewhere in the sendfile(2) system call, but I need to do some
other testing first to verify that the code is indeed sane, and my
assumptions/code isn't buggy.
The `sbytes_negative` testcases that check `sbytes` being set to an
invalid value resulting in `EFAULT` fails today as the other change
(which checks `copyout(9)`) has not been committed [1]. Thus, it
should remain an expected failure (see bug 232210 for more details
on this item).
Next steps for testing sendfile(2):
1. Fix the header/trailer testcases so that they pass.
2. Setup if_tap interface and test with it, instead of using "localhost", per
@asomers's suggestion.
3. Handle short recv(2)'s in `server_cat(..)`.
4. Add `SF_SYNC` support.
5. Add some more negative tests outside the scope of the functional contract.
MFC after: 1 month
Reviewed by: asomers
Approved by: emaste (mentor)
PR: 232210
Sponsored by: Netflix, Inc
Differential Revision: https://reviews.freebsd.org/D18625
We already call setutxent() once during initialization. Furthermore,
the subsequent calls occur after the process has entered capability
mode, so they fail, and attempts to fetch database entries fail as
a result.
PR: 235096
Submitted by: fullermd@over-yonder.net
MFC after: 3 days
The iterator should be reinitialized after every successful slab
allocation. A request to advance the iterator is interpreted as
an allocation failure, so a sufficiently large preallocation would
cause the iterator to believe that all domains were exhausted,
resulting in a sleep with the keg lock held. [1]
Also, keg_alloc_slab() should pass the unmodified wait flag to the
item initialization routine, which may use it to perform allocations
from other zones.
Reported and tested by: slavah
Diagnosed by: kib [1]
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Note that the affected interface is available only to root.
admbugs: 765
Reported by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Reviewed by: emaste, ram
MFC after: 1 day
Security: Kernel memory disclosure
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18914
gmirror's sc_flags is shared between some on-disk state and some runtime
only state. There's no real reason for that and they could probably be
split up. Until they are, locate all of the flags for the same field
nearby each other in the source, for clarity.
No functional change.
Sponsored by: Dell EMC Isilon
Changelist:
- Add the proper memory barriers in the kloop ring processing
functions.
- Fix memory barriers usage in the user helpers (nm_sync_kloop_appl_write,
nm_sync_kloop_appl_read).
- Fix nm_kr_txempty() helper to look at rhead rather than rcur. This
is important since the kloop can read a value of rcur which is ahead
of the value of rhead (see explanation in nm_sync_kloop_appl_write)
- Remove obsolete ptnetmap_guest_write_kring_csb() and
ptnet_guest_read_kring_csb(), and update if_ptnet(4) to use those.
- Prepare in advance the arguments for netmap_sync_kloop_[tr]x_ring(),
to make the kloop faster.
- Provide kernel and user implementation for nm_ldld_barrier() and
nm_ldst_barrier()
MFC after: 2 weeks
The nm_os_selwakeup function needs to call knote() to wake up kqueue(9)
users. However, this function can be called from different code paths,
with different lock requirements.
This patch fixes the knote() call argument to match the relavant lock state.
Also, comments have been updated to reflect current code.
PR: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=219846
Reported by: Aleksandr Fedorov <aleksandr.fedorov@itglobal.com>
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18876
There is may be only 11b channel (since chanflags[] table
maps MODE_AUTO to the corresponding 11b channel flags).
Checked with RTL8812AU, STA mode.
MFC after: 5 days
Change the way how channel list mode <-> desired mode match is done:
- Match channel list mode for next non-auto desired modes:
* 11b: 11g, 11ng, 11acg;
* 11a: 11na, 11ac
- Add pre-defined channels only when one of the next conditions met:
* the desired channel mode is 'auto' or
* the desired channel and selected channel list modes are exactly
the same or
* the previous rule (11g / 11n / 11ac promotion) applies.
Before r275875 construction work properly for all except
11ng / 11na / 11acg / 11ac modes - these were broken at all
(i.e., the scan list was empty); after r275875 all checks were removed,
so scan table was populated by all device-compatible channels
(desired mode was ignored).
For example, if I will set 'ifconfig wlan0 mode 11ng' for RTL8821AU:
- pre-r275875: nothing, scan will not work;
- after r275875: both 11ng and 11na bands were scanned; also, since 11b
channel list was used, 14th channel was scanned too.
- after this change: only 11ng - 1-13 channels - are used for scanning.
Tested with:
* RTL8188EE, STA mode.
* RTL8821AU, STA mode.
MFC after: 5 days
While the warning is a false positive, it is possible to clarify the code by
always initializing the variable. This does also allow to make the sending
of the "beep" control sequence depend on the validity of its parameters.
I have left the redundant assignment of 0 to the now initialized variables
in place since this makes the code simpler to understand and does not add
any run-time overhead (the compiler completely removes the "else if" test
and the assignments).
There was an embedded literal escape character in a string, which messes up
diplaying the source code on a terminal that interprets ANSI sequences. The
literal escape has been replaced by \e (non-standard, but supported by all
relevant compilers, and already used in other source files in base).
MFC after: 2 weeks
According to systat(1) :only option is supposed to accept multiple drives
but the parser for its arguments stops after first entry. Fix the parser
logic to accept multiple drives.
PR: 59220
Reported by: Andy Farkas <andyf@speednet.com.au>
MFC after: 1 week
Previously, we directly used libzfs_core's lzc_receive to import to a
temporary snapshot, then cloned the snapshot and setup the properties. This
failed when attempting to import replication streams with questionable
error.
libzfs's zfs_receive is a much better fit here, so we now use it instead
with the destination dataset and let libzfs take care of the dirty details.
be_import is greatly simplified as a result.
Reported by: Marie Helene Kvello-Aune <freebsd@mhka.no>
MFC after: 1 week
This is more compatible with formatting tools and looks more normal.
Reported by: jhb (on a different review)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18442
While this is a false positive (a sufficiently large buffer has been
allocated in the line above), the use of strdup() simplifies and clarifies
the code.
MFC after: 2 weeks
amd64 miniport drivers are allowed to use FPU which triggers "Unregistered use
of FPU in kernel" panic.
Wrap all variants of MSCALL with fpu_kern_enter/fpu_kern_leave. To reduce
amount of allocations/deallocations done via
fpu_kern_alloc_ctx/fpu_kern_free_ctx maintain cache of fpu_kern_ctx elements.
Based on the patch by Paul B Mahol
PR: 165622
Submitted by: Vlad Movchan <vladislav.movchan@gmail.com>
MFC after: 1 month
psn_len is controlled by user space, but we allocated memory based on it.
Check how much memory we might need at most (i.e. how many source nodes we
have) and limit the allocation to that.
Reported by: markj
MFC after: 1 week
Also, expose IFLIB_MAX_RX_SEGS to iflib drivers and add
iflib_dma_alloc_align() to the iflib API.
Performance is generally better with the tunable/sysctl
dev.vmx.<index>.iflib.tx_abdicate=1.
Reviewed by: shurd
MFC after: 1 week
Relnotes: yes
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D18761
The number of syscalls made during parsing of any config that
defines tables is also reduced, and incorrect warnings that HFSC
parent queue bandwidths were smaller than the sum of their child
bandwidths have been fixed.
Reviewed by: kp
MFC after: 1 week
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D18759
Note that these interfaces are available only to root.
admbugs: 765
Reported by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Reviewed by: rmacklem
MFC after: 1 day
Security: Kernel memory disclosure
Sponsored by: The FreeBSD Foundation
