Fix a related typo while here.
Note, this change results in the Kyuafile inclusion in the runtime
package, which needs to be fixed, however addresses the PR as far
as I can tell in my tests.
PR: 209114
Submitted by: ngie
Sponsored by: The FreeBSD Foundation
Specifically, mention that rman_get_bustag/handle/virtual are valid after
a resource is activated. Also, mention the wrapper API that accepts a
struct resource instead of a bus tag and handle.
The BUS_RESCAN() method rescans a single bus device checking for devices
that have been added or removed from the bus. A new 'rescan' command is
added to devctl(8) to trigger a rescan.
Differential Revision: https://reviews.freebsd.org/D6016
This is a minor follow-up to r297422, prompted by a Coverity warning. (It's
not a real defect, just a code smell.) OSD slot array reservations are an
array of pointers (void **) but were cast to void* and back unnecessarily.
Keep the correct type from reservation to use.
osd.9 is updated to match, along with a few trivial igor fixes.
Reported by: Coverity
CID: 1353811
Sponsored by: EMC / Isilon Storage Division
The mfi(4) manpage doesn't explain the modules yet, but at least we direct
users to the right place.
PR: 205925
Submitted by: dvl
MFC after: 1 week
Sponsored by: Essen Hackathon 2016
ufs/ffs/fs.h and not 10%. The newfs(8) and tunefs(8)
man pages had this change already, but fs(5) did not.
This change makes it consistent again.
Bump Dd.
PR: 204929
Submitted by: amutu@amutu.com
MFC after: 3 days
Sponsored by: Essen Linuxhotel Hackathon 2016
Otherwise the build command changes every build. META_MODE will
only remove it if something changes to warrant rebuilding
the file.
Sponsored by: EMC / Isilon Storage Division
dirdeps.mk: move logic to handle -f dirdeps.mk to inside check
for first read of dirdeps.mk
Also fix handling of WITHOUT_DIRDEPS_BELOW
gendirdeps.mk: pass M2D_EXCLUDES to meta2deps
meta.autodep.mk: if we build with nofilemon, leave a cookie to
prevent updating dependencies until cleaned.
Reviewed by: bdrewery
This is limited to src-tree builds, meaning not extended to ports or other
out-of-tree builds.
This will help ensure that read-only OBJDIRS will be respected at install-time
by causing a more consistent failure for those who don't use a read-only
OBJDIR. It also will cause Jenkins to yell. This is a better solution than
trying to see CC=false as has been attempted and discussed before.
Of course this is only relevant for files generated by CC.
Disable this for META_MODE since it will detect the CFLAGS/command
change and force a rebuild.
Sponsored by: EMC / Isilon Storage Division
Prefix with dashes (unordered list) and put one variable on each
line (to avoid future conflicts)
Done via the following one-liner:
> sh -c 'for i in $(make -C tests/sys/aio PROG=foo -VPROG_VARS:O); do printf "\t\t- $i\n"; done'
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This will allow the variables [*] to be overridden on a per-PROG basis,
which is useful when controlling "stripping" behavior for some tests
that require debug symbols or to be unstripped
DEBUG_FLAGS (similar to CFLAGS) supports appending, whereas STRIP is
an override
*: Due to how STRIP is defined in bsd.own.mk (in addition to
bsd.lib.mk and bsd.prog.mk), and the fact that bsd.test.mk pulls in
bsd.own.mk first, overriding STRIP doesn't work today.
A follow up commit is pending to "rectify" this after additional
testing is done.
Discussed with: bdrewery
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
When using meta mode with filemon, the build is reliably incremental
safe. Bmake will use the meta files, along with filemon information,
to rebuild targets when their dependencies change, commands change,
or files they generate are missing.
Sponsored by: EMC / Isilon Storage Division
This avoids 'build command changed' due to CFLAGS/CC changes during the
normal build. Without this the build-tools targets end up rebuilding
for the *target* rather than keeping the native versions built in
build-tools.
Sponsored by: EMC / Isilon Storage Division
This happened to work for not prepending .OBJDIR twice but broke the
other case of prepending it when needed.
Pointyhat to: bdrewery
Sponsored by: EMC / Isilon Storage Division
This will only be done if the target is defined, so if the target is
defined after bsd.sys.mk is included then it needs to manually add
${META_DEPS} still.
Sponsored by: EMC / Isilon Storage Division
MAKEOBJDIRPREFIX is set to blank and exported from MAKELEVEL0 along
with OBJROOT exported. In sub-makes OBJROOT is recalculated with
an empty MAKEOBJDIRPREFIX though.
Sponsored by: EMC / Isilon Storage Division
This corrects an error in r296947 in that it is not possible to assert
which thread holds a shared (or read) lock, but it is possible to assert
that one is held. Just not very useful.
MFC after: 1 week
Submitted by: wblock, jhb
Reviewed by: kib (earlier version), jhb, wblock
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5659
sounds like some kind of horrific theme park. "Hey kids, want to go to
User Land?" "No! We'll be good!"
The obvious replacement is "userland", a compound word replete with
term-of-art meaning and just a hint of cautionary tale. The alternate
terms "flugelhorn" and "bullfrog", while also good, are less well-known
and were voted down in committee.
MFC after: 1 week
This overrides the cross-compiler's default sysroot to use the WORLD32's
sysroot for building the lib32 libraries. Previously the cross-compiler
would default the sysroot to the 64bit WORLDTMP and -B/-L/-isystem flags
were used to build using the lib32 files. This leads to multiple issues
discussed later. Some extra headers are now needed to be staged since the
64bit WORLDTMP is not referenced at all for headers. The 64bit WORLDTMP
is still used via PATH for build tools. Overriding the default
target/arch is retained in the CC/CXX overrides.
This allows reverting the LDSCRIPT rewriting in installworld from r296921 and
r235122, thus allowing read-only objdirs to work for installing again.
This removes the need for _LDSCRIPTROOT.
This allows progressing the change to always use --sysroot for the build
rather than only relying on the cross-compiler's default sysroot. The
work for that is in D3970 and needed to resolve WITHOUT_CROSS_COMPILER
not using a --sysroot [1].
PR: 196193 [1]
Sponsored by: EMC / Isilon Storage Division
Skip the log entry as there is nothing good to write out. Don't fail
the syscall though since it already succeeded. There's no reason
filemon's tracing failure should fail the already-succeeded syscall.
Record the error for later to return from close(2) on the filemon devfs
file descriptor.
Discussed with: markj, sjg, kib (briefly with kib)
Reported by: mjg
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
The mbuf provider is made up of a set of Statically Defined Tracepoints
which help us look into mbufs as they are allocated and freed. This can be
used to inspect the buffers or for a simplified mbuf leak detector.
New tracepoints are:
mbuf:::m-init
mbuf:::m-gethdr
mbuf:::m-get
mbuf:::m-getcl
mbuf:::m-clget
mbuf:::m-cljget
mbuf:::m-cljset
mbuf:::m-free
mbuf:::m-freem
There is also a translator for mbufs which gives some visibility into the structure,
see mbuf.d for more details.
Reviewed by: bz, markj
MFC after: 2 weeks
Sponsored by: Rubicon Communications (Netgate)
Differential Revision: https://reviews.freebsd.org/D5682
None of lstat(2), fstat(2), fstatat(2) were tracked either.
The other filemon implementations also do not track stat(2), nor
does bmake utilize it. The act of opening a file for read should
be enough to decide that a file is a dependency. There could be
rare cases where just having a file would cause a dependency but it
is unlikely.
MFC after: 2 weeks
Also noted by: sjg
Sponsored by: EMC / Isilon Storage Division
- proc.p_filemon is added which is protected by PROC_LOCK. This improves
performance and avoids double-fork issues, taking allproc_lock
while in syscalls, and walking the process tree in syscalls. A
particular proc.p_filemon can only be changed to NULL or another
filemon, or the filemon inherited, while the filemon->lock is held.
- Filemon are reference counted. On the last reference the log will be closed.
- When closing the devfs file handle, the filemon will be detached from all
processes and inheritance prevented.
- Disallow attaching to a process already being traced since filemon is
typically intended to be used on children only. This is allowed for
curproc as bmake relies on this behavior for rare cases when combining
.MAKE with .META.
- Detach any previously tracked process on ioctl(FILEMON_SET_PID).
- Handle error from devfs_set_cdevpriv() in filemon_open().
- The global filemon lock and lists are removed.
- A free list is no longer kept. Previously this list was
forever-expanding and never garbage cleaned.
- No longer loses track of double-forks. If the process holding the filemon
handle closes it will close the log rather than wait on a daemonized process,
but it will log all activity until it closes its handle. The filemon
will be removed from the process and not inherited.
- A separate process count is kept only as an optimization for
forced detachment to avoid taking allproc_lock and walking the entire
process tree.
- struct filemon access is protected by sx(9) filemon->lock as it was before.
- Add more comments and KASSERTS.
MFC after: 2 weeks
Reviewed by: kib, mjg, markj (all on previous versions)
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5520
Archive member handling works again
meta mode, treat missing reads as for writes.
Update dirdeps.mk - much improved startup time.
Update meta.stage.mk - avoid ln when chmod required.
SYSCTL_COUNTER_U64_ARRAY() macro.
- Add proper asserts to the SYSCTL_COUNTER_U64_ARRAY() macro that checks
the size of the first element of the array.
- Add an example to the counter(9) manual page how to use the
SYSCTL_COUNTER_U64_ARRAY() macro.
- Add some missing symbolic links for counter(9) while at it.
This is several year's worth of fail point upgrades done at EMC Isilon. They
are interdependent enough that it makes sense to put a single diff up for them.
Primarily, we added:
- Changing all mainline execution paths to be lockless, which lets us use fail
points in more sleep-sensitive areas, and allows more parallel execution
- A number of additional commands, including 'pause' that lets us do some
interesting deterministic repros of race conditions
- The ability to dump the stacks of all threads sleeping on a fail point
- A number of other API changes to allow marking up the fail point's context in
the code, and firing callbacks before and after execution
- A man page update
Submitted by: Matthew Bryan <matthew.bryan@isilon.com>
Reviewed by: cem (earlier version), jhb, kib, pho
With feedback from: bdrewery
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5427
Specifically this fixes /usr/lib/libc.so stripping the paths to the
libraries. The reason for this in r266227 was both likely because ld(1) did
not fully respect --sysroot until r291226 and because of the lib32
build. The lib32 build does not use --sysroot into the /usr/lib32 path,
rather it only uses -L and -B into the /usr/lib32 path and --sysroot
into the normal (64bit) /usr/lib. The _LDSCRIPTROOT was added with
the ldscript support in bsd.lib.mk so that it builds a 32-bit-sysrooted pathed
ldscript in the object directory and then installs a normal unprefixed
version in installworld. This commit also fixes the rebuild during
install which was broken in r266227. This commit would break DIRDEPS_BUILD
build of lib32 but it does not currently have a way to build it anyhow.
For example, before this change we had in /usr/lib/libc.so:
GROUP ( libc.so.7 libc_nonshared.a libssp_nonshared.a )
Now it is restored to pre-r266227:
GROUP ( /lib/libc.so.7 /usr/lib/libc_nonshared.a /usr/lib/libssp_nonshared.a )
The motivation for this is in testing of lld.
From emaste:
lld does not have built-in search paths (e.g. /lib, /usr/lib) and relies on
-L arguments passed by the caller. As the linker is nearly always invoked
from the clang driver this is fine other than the fact that /usr/lib/libc.so
is an ldscript that refers to libc.so.7 which is in /lib, not /usr/lib.
PR: 207980
Reported by: emaste
Submitted by: emaste (based on)
Differential Revision: https://reviews.freebsd.org/D5637
No functional change.
This prevents adding empty targets to the main called target which is
confusing for debugging.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
This also fixes META MODE rebuilding these because the 'number of build commands'
changed from the previous build.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
Extend it to other cases of meta mode cookies so they get the proper rm
cookie behavior when a .meta file detects it needs to rebuild and fails.
Sponsored by: EMC / Isilon Storage Division
This obsoletes the _SKIP_BUILD check but keeps it for now until it
proves to be enough.
In the dirdeps build the first 'make all' or 'make' ran would invoke
'make dirdeps' which builds dependencies and then builds the current
directory in a sub-make (when BUILD_AT_LEVEL0 is no, which for us it
is). This behavior causes things attached to 'all:' to build in the
dirdeps phase AND the sub-make phase which creates all kinds of problems
for staging, meta file tracking, and races.
Sponsored by: EMC / Isilon Storage Division
This also fixes meta tracking for the beforeinstall since it had been
marked .PHONY before (in bsd.sys.mk).
Sponsored by: EMC / Isilon Storage Division
This is a follow-up to r291561 which reworked the bootstrap tool PATH
handling.
An example of this is when building lib/clang/libclangedit. At first
clang-tblgen will not be staged in the host tree so it will have
CLANG_TBLGEN=clang-tblgen set and exported. During the build though it
will stage clang-tblgen and then find it via the PATH. On the next
build it finds clang-tblgen in the stage directory and would set
CLANG_TBLGEN=<stagedir/usr/bin>/clang-tblgen thus causing the build
command to change. In both cases the same exact tool was used though so
there is no need to rebuild. If the tool did change the normal
meta/filemon handling would pick that up via timestamp comparisons and
rebuild.
Sponsored by: EMC / Isilon Storage Division
An example of where this is needed is in share/examples which for
'etc-examples' runs 'make -C SRCTOP/etc etc-examples' which installs
to the default DESTDIR otherwise.
Sponsored by: EMC / Isilon Storage Division
This came in r239572 for META_MODE handling but it doesn't make sense
since the staging is always done in make(all); make(buildincludes)
is never actually ran in the META_MODE build.
Reported by: bapt
Sponsored by: EMC / Isilon Storage Division
The meta file may decide the target is out of date but nothing
ensures that the *next* build will build this target if it
fails this time for some reason; it is still out-of-date
until it succeeds.
Convert the include/ cookie usage to the global versions.
Sponsored by: EMC / Isilon Storage Division
The inclusion of .MAKE.DEPENDFILE (.depend) has special logic in make
to ignore stale/missing dependencies. bmake 20160220 added a '.dinclude'
directive that uses the special logic for .depend when including the file.
This fixes a build error when a file is moved or deleted that exists in a
.depend.OBJ file. This happened in r292782 when sha512c.c "moved" and an
incremental build of lib/libmd would fail with:
make: don't know how to make /usr/src/lib/libcrypt/../libmd/sha512c.c. Stop
Now this will just be seen as a stale dependency and cause a rebuild:
make: /usr/obj/usr/src/lib/libmd/.depend.sha512c.o, 13: ignoring stale .depend for /usr/src/lib/libcrypt/../libmd/sha512c.c
--- sha512c.o ---
...
This rebuild will only be done once since the .depend.sha512c.o will
be updated on the build with the -MF flags.
This also removes -MP being passed for the .depend.OBJ generation (which
would create fake targets for system headers) since the logic is no
longer needed to protect from missing files.
Sponsored by: EMC / Isilon Storage Division
One example is in cddl/usr.sbin/dtrace/tests/common/aggs. It could be
fixed but other uses of this would break, especially in the
DIRDEPS_BUILD which uses the group names for stage cookies.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This will allow Makefile.depend to properly capture all dependencies.
It is not 100% optimal but works. Other options would be to use *.meta
here which would include too much or to keep a Makefile.depend per PROG
and include it from the main Makefile.depend which would not be
straight forward.
Sponsored by: EMC / Isilon Storage Division
Code may still be executing from the wrappers at unload time and thus is
not generally safe to unload. Converting the wrappers to use
EVENTHANDLER(9) will allow this to safely drain on active threads in
hooks. More work on EVENTHANDLER(9) is needed first.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
There is no good way to guess if any of these will be needed but
they commonly are and add no extra overhead so just stage them.
Sponsored by: EMC / Isilon Storage Division
Currently the base.txz distribution does not get the BSD.debug.dist mtree
extracted into it. So if you start from that and then try to build a 3rd-party
application outside of buildworld it will by-default try installing the
debug files into a missing directory if they are being installed into /usr/lib.
Check for the existence before forcing the directory to be created rather than
the older way of running a shell command with test -d || mkdir -p always.
Reported by: HardenedBSD (https://github.com/HardenedBSD/secadm/issues/23)
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5411
This was a regression in r295985.
bsd.dep.mk adds to SRCS for dtrace probes, yacc grammars and some
others.
The code that is moving is planned to be removed once FAST_DEPEND is
default (and the only option) though since FAST_DEPEND doesn't use this.
Pointyhat to: bdrewery
Sponsored by: EMC / Isilon Storage Division
Since m_cat() may copy data from the second mbuf chain into the last mbuf
of the first chain, it may free the first mbuf of the second chain. Thus,
the second chain is not guaranteed to be valid after m_cat() returns.
Reviewed by: glebius
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D5497
This is done to prevent not having CCACHE_DIR causing meta mode with filemon to
see stat changes in the ccache dir and cause rebuilds.
Sponsored by: EMC / Isilon Storage Division
improve cancellation robustness.
Introduce a new file operation, fo_aio_queue, which is responsible for
queueing and completing an asynchronous I/O request for a given file.
The AIO subystem now exports library of routines to manipulate AIO
requests as well as the ability to run a handler function in the
"default" pool of AIO daemons to service a request.
A default implementation for file types which do not include an
fo_aio_queue method queues requests to the "default" pool invoking the
fo_read or fo_write methods as before.
The AIO subsystem permits file types to install a private "cancel"
routine when a request is queued to permit safe dequeueing and cleanup
of cancelled requests.
Sockets now use their own pool of AIO daemons and service per-socket
requests in FIFO order. Socket requests will not block indefinitely
permitting timely cancellation of all requests.
Due to the now-tight coupling of the AIO subsystem with file types,
the AIO subsystem is now a standard part of all kernels. The VFS_AIO
kernel option and aio.ko module are gone.
Many file types may block indefinitely in their fo_read or fo_write
callbacks resulting in a hung AIO daemon. This can result in hung
user processes (when processes attempt to cancel all outstanding
requests during exit) or a hung system. To protect against this, AIO
requests are only permitted for known "safe" files by default. AIO
requests for all file types can be enabled by setting the new
vfs.aio.enable_usafe sysctl to a non-zero value. The AIO tests have
been updated to skip operations on unsafe file types if the sysctl is
zero.
Currently, AIO requests on sockets and raw disks are considered safe
and are enabled by default. aio_mlock() is also enabled by default.
Reviewed by: cem, jilles
Discussed with: kib (earlier version)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D5289
taskqueue_enqueue() was changed to support both fast and non-fast
taskqueues 10 years ago in r154167. It has been a compat shim ever
since. It's time for the compat shim to go.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: sephe
Differential Revision: https://reviews.freebsd.org/D5131
Freescale's QorIQ line includes a new ethernet controller, based on their
Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame
manager, Buffer manager, and Queue manager to improve performance across all
interfaces by being able to pass data directly between hardware acceleration
interfaces.
As part of this import, Freescale's Netcomm Software (ncsw) driver is imported.
This was an attempt by Freescale to create an OS-agnostic sub-driver for
managing the hardware, using shims to interface to the OS-specific APIs. This
work was abandoned, and Freescale's primary work is in the Linux driver (dual
BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than
going through the vendor area. Going forward, FreeBSD-specific changes may be
made to the ncsw code, diverging from the upstream in potentially incompatible
ways. An alternative could be to import the Linux driver itself, using the
linuxKPI layer, as that would maintain parity with the vendor-maintained driver.
However, the Linux driver has not been evaluated for reliability yet, and may
have issues with the import, whereas the ncsw-based driver in this commit was
completed by Semihalf 4 years ago, and is very stable.
Other SoC modules based on DPAA, which could be added in the future:
* Security and Encryption engine (SEC4.x, SEC5.x)
* RAID engine
Additional work to be done:
* Implement polling mode
* Test vlan support
* Add support for the Pattern Matching Engine, which can do regular expression
matching on packets.
This driver has been tested on the P5020 QorIQ SoC. Others listed in the
dtsec(4) manual page are expected to work as the same DPAA engine is included in
all.
Obtained from: Semihalf
Relnotes: Yes
Sponsored by: Alex Perez/Inertial Computing
Summary:
Many instances of bus_alloc_resource() simply use 0 and ~0 for start and end to
denote 'anywhere' with a given count. To clean this up, introduce a
bus_alloc_resource_anywhere() convenience function.
Bump __FreeBSD_version for the new API.
Reviewed By: jhb
Differential Revision: https://reviews.freebsd.org/D5370
This allows 'make analyze' or 'make OBJ.clang-analyzer' to run the
Clang static analyzer and present results on stdout.
Obtained from: NetBSD (CVS Rev. 1.3)
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D5449
- bsd.progs.mk is safe to include regardless of PROGS/PROGS_CXX/SCRIPTS
being set.
- bsd.progs.mk includes bsd.prog.mk always and will bring in
bsd.files.mk and bsd.obj.mk.
- DIRDEPS_BUILD: There's no need for _SKIP_BUILD or _SKIP_STAGING as the
PROGS were implicitly being built by the staging dependency anyway. This
was also preventing other objects from building if they were not part of
the staging sets.
- DIRDEPS_BUILD: This fixes PROGS without bsd.test.mk not staging.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
For PROGS this was recursing twice since MAKELEVEL0 is for 'dirdeps'
which then really builds in a sub-make.
Sponsored by: EMC / Isilon Storage Division
r96164 added them to avoid recursing twice with _SUBDIR. That issue was
fixed in bsd.subdir.mk in r291635 for all targets.
Sponsored by: EMC / Isilon Storage Division
As of r295661 elfcopy supports PE format for EFI boot binaries and is a
viable objcopy implementation for the base system and ports.
The (temporary) src.conf knob WITHOUT_ELFCOPY_AS_OBJCOPY knob may be set
to obtain the GNU version if necessary.
PR: 207091 [exp-run]
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
The OBJS_DEPEND_GUESS mechanism required moving the bsd.dep.mk inclusion
to after the checks, but left DEPENDFILE not-yet-set. Move it to
bsd.own.mk to resolve this.
Pointyhat to: bdrewery
Reported by: antoine (ports failures)
Sponsored by: EMC / Isilon Storage Division
After calling the cap_init(3) function Casper will fork from it's original
process, using pdfork(2). Forking from a process has a lot of advantages:
1. We have the same cwd as the original process.
2. The same uid, gid and groups.
3. The same MAC labels.
4. The same descriptor table.
5. The same routing table.
6. The same umask.
7. The same cpuset(1).
From now services are also in form of libraries.
We also removed libcapsicum at all and converts existing program using Casper
to new architecture.
Discussed with: pjd, jonathan, ed, drysdale@google.com, emaste
Partially reviewed by: drysdale@google.com, bdrewery
Approved by: pjd (mentor)
Differential Revision: https://reviews.freebsd.org/D4277
Given PROG1 PROG2, 'make PROG1' would work but 'make PROG1 PROG2' would not.
Just build them as normal in a sub-make to avoid any issues.
MFC after: 2 weeks
Sponsored by: EMC / Isilon Storage Division
For example when building, from buildworld, lib/atf/libatf-c++/tests/detail:
--- all_subdir_atf ---
is now:
--- all_subdir_lib/atf/libatf-c++/tests/detail ---
Sponsored by: EMC / Isilon Storage Division
This will generate dependencies rather than depending on the previous behavior
of depending on the guessed OBJS: *.h dependecies or a user running
'make depend'.
Experimentation showed that depending only on headers was not enough and
prone to .ORDER errors. Downstream users may also have added
dependencies into beforedepend or afterdepend targets. The safest way to
ensure dependencies are generated before build is to run 'make depend'
beforehand rather than just depending on DPSRCS+SRCS.
Note that the OBJS_DEPEND_GUESS mechanism (a.k.a .if !exists(.depend) then
foo.o: *.h) is still useful as it improves incremental builds with missing
.depend.* files and allows 'make foo.o' to usually work, while this
'beforebuild: depend' ensures that the build will always find all dependencies.
The 'make foo.o' case has no means of a 'beforebuild' hook.
This also removes several hacks in the DIRDEPS_BUILD:
- NO_INSTALL_INCLUDES is no longer needed as it mostly was to work around
.ORDER problems with building the needed headers early.
- DIRDEPS_BUILD: It is no longer necesarry to track "local dependencies" in
Makefile.depend.
These were only in Makefile.depend for 'clean builds' since nothing would
generate the files due to skipping 'make depend' and early dependency
bugs that have been fixed, such as adding headers into SRCS for the
OBJS_DEPEND_GUESS mechanism. Normally if a .depend file does not exist then
a dependency is added by bsd.lib.mk/bsd.prog.mk from OBJS: *.h. However,
meta.autodep.mk creates a .depend file from created meta files and inserts
that into Makefile.depend. It also only tracks *.[ch] files though which can
miss some dependencies that are hooked into 'make depend'. This .depend
that is created then breaks incremental builds due to the !exists(.depend)
checks for OBJS_DEPEND_GUESS. The goal was to skip 'make depend' yet it only
really works the first time. After that files are not generated as expected,
which r288966 tried to address but was using buildfiles: rather than
beforebuild: and was reverted in r291725. As noted previously,
depending only on headers in beforebuild: would create .ORDER errors
in some cases.
meta.autodep.mk is still used to generate Makefile.depend though via:
gendirdeps: Makefile.depend
.END: gendirdeps
This commit allows removing all of the "local dependencies" in
Makefile.depend which cuts down on churn and removes some of the
arch-dependent Makefile.depend files.
The "local dependencies" were also problematic for bootstrapping.
Sponsored by: EMC / Isilon Storage Division
FAST_DEPEND is intended to be the "skip 'make depend' and mkdep"
feature. Since DIRDEPS_BUILD does this already with some of its own
hacks, and filemon doesn't need this, and nofilemon does, teach it how
to handle each of these cases.
In meta+filemon mode filemon will handle dependencies itself via the
meta mode logic in bmake. We still want to set MK_FAST_DEPEND=yes to
enable some logic that indicates that 'make depend' is skipped in the
traditional sense. The actual .depend.* files will be skipped.
When nofilemon is set though we still need to track and generate dependencies.
Sponsored by: EMC / Isilon Storage Division
The .depend file will still be generated if _EXTRADEPEND is used. The target
is kept with a dependency on DPSRCS though so that 'make depend' will generate
all files.
Sponsored by: EMC / Isilon Storage Division
Rather than depend on .depend not existing, check the actual
.depend.OBJ file that will be used for that object. If it doesn't
exist then use the guessed dependencies.
FAST_DEPEND may never have a .depend file. Not having one means all of the
previous logic would over-depend all object files on all headers which is not
what we wanted. It also means that if a .depend is generated before a build
is done for _EXTRADEPEND (such as for PROG or LIB) then all of these
dependencies would not be used since the .depend wasn't generated from mkdep
and the real .depend.* files are not generated until the build.
Sponsored by: EMC / Isilon Storage Division
cleandepend should always remove CLEANDEPEND* if they are not empty,
but bsd.dep.mk should not add the tags entries unless SRCS is defined
as it did before. The .depend file itself it still always removed
to avoid accidentally keeping a stale one around as done in r295666.
Sponsored by: EMC / Isilon Storage Division
is exhausted.
How to use:
Basically we need to add on rc.conf an another option like:
If we want to protect only the main processes.
syslogd_oomprotect="YES"
If we want to protect all future children of the specified processes.
syslogd_oomprotect="ALL"
PR: 204741 (based on)
Submitted by: eugen@grosbein.net
Reviewed by: jhb, allanjude, rpokala and bapt
MFC after: 4 weeks
Relnotes: Yes
Sponsored by: gandi.net
Differential Revision: https://reviews.freebsd.org/D5176
and geom_uncompress(4):
1. mkuzip(8):
- Proper support for eliminating all-zero blocks when compressing an
image. This feature is already supported by the geom_uzip(4) module
and CLOOP format in general, so it's just a matter of making mkuzip(8)
match. It should be noted, however that this feature while it sounds
great, results in very slight improvement in the overall compression
ratio, since compressing default 16k all-zero block produces only 39
bytes compressed output block, which is 99.8% compression ratio. With
typical average compression ratio of amd64 binaries and data being
around 60-70% the difference between 99.8% and 100.0% is not that
great further diluted by the ratio of number of zero blocks in the
uncompressed image to the overall number of blocks being less than
0.5 (typically). However, this may be important from performance
standpoint, so that kernel are not spinning its wheels decompressing
those empty blocks every time this zero region is read. It could also
be important when you create huge image mostly filled with zero
blocks for testing purposes.
- New feature allowing to de-duplicate output image. It turns out that
if you twist CLOOP format a bit you can do that as well. And unlike
zero-blocks elimination, this gives a noticeable improvement in the
overall compression ratio, reducing output image by something like
3-4% on my test UFS2 3GB image consisting of full FreeBSD base system
plus some of the packages (openjdk, apache etc), about 2.3GB worth of
file data (800+MB compressed). The only caveat is that images created
with this feature "on" would not work on older versions of FeeBSDxi
kernel, hence it's turned off by default.
- provide options to control both features and document them in manual
page.
- merge in all relevant LZMA compression support from the mkulzma(8),
add new option to select between both.
- switch license from ad-hoc beerware into standard 2-clause BSD.
2. geom_uzip(4):
- implement support for de-duplicated images;
- optimize some code paths to handle "all-zero" blocks without reading
any compressed data;
- beef up manual page to explain that geom_uzip(4) is not limited only
to md(4) images. The compressed data can be written to the block
device and accessed directly via magic of GEOM(4) and devfs(4),
including to mount root fs from a compressed drive.
- convert debug log code from being compiled in conditionally into
being present all the time and provide two sysctls to turn it on or
off. Due to intended use of the module, it can be used in
environments where there may not be a luxury to put new kernel with
debug code enabled. Having those options handy allows debug issues
without as much problem by just having access to serial console or
network shell access to a box/appliance. The resulting additional
CPU cycles are just few int comparisons and branches, and those are
minuscule when compared to data decompression which is the main
feature of the module.
- hopefully improve robustness and resiliency of the geom_uzip(4) by
performing some of the data validation / range checking on the TOC
entries and rejecting to attach to an image if those checks fail.
- merge in all relevant LZMA decompression support from the
geom_uncompress(4), enable automatically when appropriate format is
indicated in the header.
- move compilation work into its own worker thread so that it does not
clog g_up. This allows multiple instances work in parallel utilizing
smp cores.
- document new knobs in the manual page.
Reviewed by: adrian
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D5333
and manual page were.
For whatever reason it listed myself as a primary author, which is
just not true.
Also, majority of the manpage is copied verbatim from the geom_uzip(4),
contributed by ceri, with only minor adjustments from loos, so put ceri
back into the copyright secrion where he belongs and reflect that in the
AUTHORS section.
For what it's worth, I think this one should be deleted and LZMA
support just folded back into geom_uzip(4) / mkuzip(4) whete it really
belongs.
MFC after: 1 month
This will speed up some tree-walks with FAST_DEPEND which otherwise
would include length(SRCS) .depend files.
This also uses a trick suggested by sjg@ to still read them in when
specifying _V_READ_DEPEND=1 in the env/make args.
Sponsored by: EMC / Isilon Storage Division
While "jng" or "jib" without arguments told you what each sub-command does,
sub-command usage didn't tell you (e.g., "jng bridge" or "jib addm" gave
only usage and not description).
While here clean up the documentation for jail_list
PR: 196152
Approved by: jamie, wblock
MFC after: 1 week, with r295471
Differential Revision: https://reviews.freebsd.org/D5243
Reduce differences between jib/jng and fix a bug that would prevent
additional interfaces from being created if the first of many already
existed (counter wasn't incremented before calling only continue).
Adding `!' before an interface name will disable MAC allocation, falling
back to driver mechanics. Alternatively adding `=' before an interface name
causes the MAC address to be cloned (for ng_bridge(4) back-end only). While
here, disable the auto-detection of wlan* since this knocks the host off;
requiring the host that defines the jail to explicitly enable this feature
by preceding the interface with `='.
Documented in iwn(4), "Only one virtual interface may be configured at any
time." However, netgraph with a cloned MAC address is able to communicate
over an ng_eiface attached to an ng_bridge linked to the wlan(4) interface.
While here, introduce syntax to specify the MAC address is to be cloned if
the named interface begins with equals [=].
As of r294068 boot1.efi can load loader.efi from ZFS.
As of r295320 boot1.efi prefers to load loader.efi from the same device
it was loaded from.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Replace `make regress` (legacy test make target) and `make test` (incomplete
test make target added with the FreeBSD test suite) with make check as it's
consistent with other open source projects.
`make check` defaults to running tests from `.OBJDIR`, but can be overridden
with the `CHECKDIR` variable.
Add `make checkworld` target to simplify running the FreeBSD test suite from
`TESTSBASE` (i.e. the top-level tests directory), similar to buildworld.
Document `make check` and `make checkworld` in build(7).
Other minor changes:
- Rename intermediate file (`Kyuafile.auto`) to `Kyuafile` to simplify
`make check`.
- Remove terse warnings attached to `beforetest`/`aftertest`.
- Add kyua binary check to check target in suite.test.mk; error out if it's
not found
The MFC is [partly] contingent on other build related changes being MFCed.
Differential Revision: https://reviews.freebsd.org/D4406
MFC after: 2 months
X-MFC to: stable/10
Relnotes: yes
Reviewed by: bdrewery, Evan Cramer <eccramer@gmail.com>
Sponsored by: EMC / Isilon Storage Division
