The pidx argument of isc_rxd_flush() indicates which is the last valid
receive descriptor to be used by the NIC. However, current code has
multiple issues:
- Intel drivers write pidx to their RDT register, which means that
NICs will only use the descriptors up to pidx-1 (modulo ring size N),
and won't actually use the one pointed by pidx. This does not break
reception, but it is anyway confusing and suboptimal (the NIC will
actually see only N-2 descriptors as available, rather than N-1).
Other drivers (if_vmx, if_bnxt, if_mgb) adhere to this semantic).
- The semantic used by Intel (RDT is one descriptor past the last
valid one) is used by most (if not all) NICs, and it is also used
on the TX side (also in iflib). Since iflib is not currently
using this semantic for RX, it must decrement fl->ifl_pidx
(modulo N) before calling isc_rxd_flush(), and then the
per-driver callback implementation must increment the index
again (to match the real semantic). This is confusing and suboptimal.
- The iflib refill function is also called at initialization.
However, in case the ring size is smaller than 128 (e.g. if_mgb),
the refill function will actually prepare all the receive
descriptors (N), without leaving one unused, as most of NICs assume
(e.g. to avoid RDT to overrun RDH). I can speculate that the code
looks like this right now because this issue showed up during
testing (e.g. with if_mgb), and it was easy to workaround by
decrementing pidx before isc_rxd_flush().
The goal of this change is to simplify the code (removing a bunch
of instructions from the RX fast path), and to make the semantic of
isc_rxd_flush() consistent across drivers. To achieve this, we:
- change the semantics of the pidx argument to the usual one (that
is the index one past the last valid one), so that both iflib and
drivers avoid the decrement/increment dance.
- fix the initialization code to prepare at most N-1 descriptors.
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D26191
Previously we were relying on ether_ifattach() to set if_mtu, but
max_frame_size is initialized earlier. This fixes a regression
introduced by r250375.
PR: 249050
Submitted by: Christian Vallières <novacrash_@hotmail.com>
MFC after: 3 days
Implement support for an eSDHC controller found in NXP QorIQ Layerscape SoCs.
This driver has been tested with NXP LS1046A and LX2160A (Honeycomb board),
which is incompatible with the existing sdhci_fsl driver (aiming at older
chips from this family). As such, it is not intended as replacement for
the old driver, but rather serves as an improved alternative for SoCs that
support it.
It comes with support for both PIO and Single DMA modes and samples the
clock from the extres clk API.
Submitted by: Artur Rojek <ar@semihalf.com>
Reviewed by: manu, mmel, kibab
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D26153
Previously the send tag was setup in the background, and all packets for
the given send tag were dropped until ready. Change this to be blocking
behaviour so that once the setsocketopt() for enabling TLS completes,
the socket is ready to send packets. Do this by simply flushing the
work request which does the needed firmware programming during send
tag allocation.
MFC after: 1 week
Sponsored by: Mellanox Technologies // Nvidia
The "Intel Sunrise Point-LP USB 3.0 controller" doesn't update the wMaxPacket
field in the control endpoint context automatically causing a BABBLE error code
on the initial first USB device descriptor read, when the bMaxPacketSize is not
8 bytes.
Reported by: wulf@
PR: 248784
MFC after: 1 week
Sponsored by: Mellanox Technologies
These devices have non-pccard attachments. Warn for those as well. Both an and
wi don't do the modern cyrpto needed to use these cards on secure wifi networks.
an needs firmware from Cisco, which I don't think was ever produced. wi could
in theory do it with raw frames and on-host encryption, but nobody has written
that in the 15 years since WEP was cracked.
MFC After: 3 days
Noticed by: rgrimes
Differential Revision: https://reviews.freebsd.org/D26138
PDDR (Port Diagnostics Database Register) is used to read the physical
layer debug database, which contains helpful troubleshooting information
regarding the state of the link.
PDDR register can only be queried when PCAM register reports it as
supported in its register mask. A new helper macro was added to
the MLX5_CAP_* infrastructure in order to access this mask.
Sponsored by: Mellanox Technologies - Nvidia
MFC after: 1 week
In hv_storvsc_io_request() when coring, prevent changing of the send channel
from the base channel to another one. storvsc_poll always probes on the base
channel.
Based upon conversations with Microsoft, changed the handling of srb_status
codes. Most we should never get, others yes. All are treated as retry-able
except for two. We should not get these statuses, but if we ever do, the I/O
state is not known.
Submitted by: Alexander Sideropoulos <Alexander.Sideropoulos@netapp.com>
Reviewed by: trasz, allanjude, whu
MFC after: 1 week
Sponsored by: Netapp Inc
Differential Revision: https://reviews.freebsd.org/D25756
the hook at queue mode was that mn_rx_intr() doesn't run at splnet
level. In today's netgraph the only legitimate reason for queue mode
is recursion avoidance. So I see no reason for queue mode here.
Not tested!
splclock is used in one driver (spkr) to control access to
timer_spkr_* routines. However, nothing else does. So it shows no
useful locking info to someone that would want to lock spkr.
NOTE: I think there's races with timer_spkr_{acquire,release} since
there's no interlock in those routines, despite there being a spin
lock to protect the clock. Current other users appear to use no extra
locking protocol, though they themselves appear to be at least
attempting to make sure that only a single thread calls these
routines. I suspect the right answer is to update these routines to
take/release the clock spin lock since they are short and to the
point, but that's beyond the scope of this commit.
ich_init() returns an errno value or 0, but ich_pci_resume() was
comparing the return value with -1 to determine whether an error had
occurred.
PR: 248941
Submitted by: Tong Zhang <ztong0001@gmail.com>
MFC after: 1 week
fdc_in() returns only 0 and 1, some callers were checking incorrectly
for failure.
PR: 248940
Submitted by: Tong Zhang <ztong0001@gmail.com>
MFC after: 1 week
asmc_key_read() returns only 0 and 1, some callers were checking
incorrectly for failure.
PR: 248939
Submitted by: Tong Zhang <ztong0001@gmail.com>
MFC after: 1 week
crypto(9) functions can now be used on buffers composed of an array of
vm_page_t structures, such as those stored in an unmapped struct bio. It
requires the running to kernel to support the direct memory map, so not all
architectures can use it.
Reviewed by: markj, kib, jhb, mjg, mat, bcr (manpages)
MFC after: 1 week
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D25671
