(disabled by default).
To enable it, dev.rtwn.%d.radar_detection tunable need to be set
to a nonzero value.
Tested with RTL8821AU, AP mode (no radar events were seen - so,
I have no idea if it is really correct / working)
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D8903
Sync libarchive with vendor.
Vendor changes (relevant to FreeBSD):
PR #771: Add NFSv4 ACL support to pax and restricted pax
NFSv4 ACL information may now be stored to and restored from tar archives.
ACL must be non-trivial and supported by the underlying filesystem, e.g.
natively by ZFS or by UFS with the NFSv4 ACL enable flag set.
MFC after: 2 weeks
Relnotes: yes
structs under the INET6 #ifdef. Similarly (even though it doesn't seem
to affect the build), conditionalize all IPv4 structs under the INET
#ifdef
This also unbreaks the LINT-NOINET6 tinderbox target on amd64; I have not
verified other MACHINE/TARGET pairs (e.g. armv6/arm).
MFC after: 2 weeks
X-MFC with: r310847
Pointyhat to: jpaetzel
Reported by: O. Hartmann <o.hartmann@walstatt.org>
The strategy argument cleanup in r310850 did miss another call to strategy(),
and left it with extra argument.
Reviewed by: allanjude
Approved by: allanjude (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D9003
Apparently the libstand dosfs optimization is a bit too optimistic
and did introduce possible memory corruption.
This patch is backing out the bad part and since this results in
dosfs reading full blocks now, we can also remove extra offset argument
from dv_strategy callback.
The analysis of the issue and the backout patch is provided by Mikhail Kupchik.
PR: 214423
Submitted by: Mikhail Kupchik
Reported by: Mikhail Kupchik
Reviewed by: bapt, allanjude
Approved by: allanjude (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8644
If pager' populate method succeeded, but other thread raced with us
and modified vm_map, we must unbusy all pages busied by the pager,
before we retry the whole fault handling. If pager instantiated more
pages than fit into the current map entry, we must unbusy the pages
which are clipped.
Also do some refactoring, clarify comments and use more clear local
variable names.
Reported and tested by: kargl, subbsd@gmail.com (previous version)
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
If there is a loop in the network a CARP that is in MASTER state will see it's
own broadcasts, which will then cause it to assume BACKUP state. When it
assumes BACKUP it will stop sending advertisements. In that state it will no
longer see advertisements and will assume MASTER...
We can't catch all the cases where we are seeing our own CARP broadcast, but
we can catch the obvious case.
Submitted by: torek
Obtained from: FreeNAS
MFC after: 2 weeks
Sponsored by: iXsystems
The boot2 family of bootblocks (zfsboot/gptzfsboot) are using separate
implementation if keyboard reading code, which has deadlock case when
extended key (arrows etc) are pressed.
The problem is about avoiding the noise from some systems, generating
false key events with scan code 1 and ascii code 00, so the code
does attempt to filter such cases out. Unfortunately the extended keys
also set ascii 0, and therefore the pressed key event is ignored and
the keypress is never read, resulting in infinite loop.
This update is moving the check to keyhit() function and is allowing
the rest of the code to process the extended keys.
Reviewed by: bapt, allanjude
Approved by: allanjude (mentor)
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D8608
Move llvm-objdump from CLANG_EXTRAS to installed by default
We currently install three tools from binutils 2.17.50: as, ld, and
objdump. Work is underway to migrate to a permissively-licensed
tool-chain, with one goal being the retirement of binutils 2.17.50.
LLVM's llvm-objdump is intended to be compatible with GNU objdump
although it is currently missing some options and may have formatting
differences. Enable it by default for testing and further investigation.
It may later be changed to install as /usr/bin/objdump, it becomes a
fully viable replacement.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D8879
* Firmware oriented NICs may need to sleep in their configuration paths.
Use RLOCK instead of WLOCK to allow this to again occur.
This fixes netmap on cxgbe.
* Change the worker lock to a normal mutex rather than a spin lock.
Drivers shouldn't be doing netmap work from the fast interrupt
handlers, so it's not required to be a spinlock.
Submitted by: luigi, Vincenzo Maffione <v.maffione@gmail.com>
Reviewed by: jhb
This allows the common code to use the correct type for the lock state
local variable passed to EFSYS_LOCK() and EFSYS_UNLOCK().
On Windows, this allows warning supression pragmas to be removed.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Wake-on-lan is not supported in production on any of our adapters, as
they don't have the required AUX power connector. (It's possible that
AUX power is supplied to some of our ALOM or mezz adapters, but if so
then we've never implemented or tested WoL support.)
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8972
The previous API had various problems, including the length of the
caller provided buffer not being specified, no means being available
to discover how big the buffer needs to be, and a lack of clarity of
what the resulting list contains.
To fix it:
- add the buffer length as a parameter
- if the provided buffer is too short, fail with ENOSPC and return the
required length
- ensure that the list contents are valid and add comments
describing it
It is safe to change this API as, unsuprisingly, it has no users.
Submitted by: Mark Spender <mspender at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8971
Manftest needs to know exactly what went wrong with the verified update
so that failing boards can be correctly diagnosed.
Submitted by: Tom Millington <tmillington at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8969
In newer firmware that supports multithreaded MCDI processing,
longer running commands may be run ina background thread. Add
support for drivers to query the appropriate timeout for each
MCDI request.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D8968
Poll-mode driver does not use interrupts and number of used event queues
should not be limitted by the number of interrupts allocated for the
NIC.
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D8967
- Update struct link_settings and associated shared code.
- Add tunables to control FEC and autonegotiation. All ports inherit
these values as their initial settings.
hw.cxgbe.fec
hw.cxgbe.autoneg
- Add per-port sysctls to control FEC and autonegotiation. These can be
modified at any time.
dev.<port>.<n>.fec
dev.<port>.<n>.autoneg
MFC after: 3 days
Sponsored by: Chelsio Communications
This patch solves IRQ generation problems using the mlx5en(4) driver
with xenserver v6.5.0 in SRIOV and PCI-passthrough modes.
Until further the hw.pci.msix_rewrite_table quirk must be set manually
in /boot/loader.conf .
Reviewed by: jhb @
Sponsored by: Mellanox Technologies
MFC after: 2 weeks
Also, add test cases for the -p, -P, and -s options to gnop create
Reviewed by: ngie
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D8892
Recognize new MACHINE_ARCH names now as we have added hardfloat support.
Switch JZ4780 to mipselhf and remove all uses of TARGET_ARCH in kernel
.mk files.
Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D8989
