Functionally, the latter error wouldn't necessarily hurt anything. io.write
will just error out as it's not passed a valid file handle. Still, we can do
better than that.
The functionality was correct, but our style guidelines tend to request that
we shy away from using boolean operations in place of explicit comparisons
to nil.
config.parse now takes an extra callback that is invoked on the full text of
the config file. This callback dictates where we should actually try to
parse this file or not.
For nextboot, we use this to halt parsing if we see 'nextboot_enable="NO"'.
If we don't, parse it and write 'nextboot_enable="NO" ' to it. The same
caveat as with forth still applies- writing is only supported by UFS.
Write support (even if it only works on UFS) will be needed for nextboot
functionality.
Reviewed by: cem, imp
Differential Revision: https://reviews.freebsd.org/D14478
These interfaces were put in place to let QorIQ SoCs dictate CPU idling
semantics, in order to support capabilities such as NAP mode and deep sleep.
However, this never stabilized, and the idling support reverted back to
CPU-level rather than SoC level. Move this code back to cpu.c instead. If
at a later date the lower power modes do come to fruition, it should be done
by overriding the cpu_idle_hook instead of this platform hook.
When I wrote the patch, I wanted to remove SYSINIT() usage from amd64 code.
There is no reason to keep the divergence any more because iwasaki merged
most amd64 suspend/resume code to i386 with r235622. Note this also fixed
an enge case reported by royger. [1]
Suggested by: jhb
Reviewed by: royger
Tested by: royger [1]
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14400 [1]
After r328977, a wired page m may have m->queue != PQ_NONE.
Reviewed by: kib
X-MFC with: r328977
Differential Revision: https://reviews.freebsd.org/D14485
use it to regulate page daemon output.
This provides much smoother and more responsive page daemon output, anticipating
demand and avoiding pageout stalls by increasing the number of pages to match
the workload. This is a reimplementation of work done by myself and mlaier at
Isilon.
Reviewed by: bsdimp
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14402
No implementation of fpu_kern_enter() can fail, and it was causing needless
error checking boilerplate and confusion. Change the return code to void to
match reality.
(This trivial change took nine days to land because of the commit hook on
sys/dev/random. Please consider removing the hook or otherwise lowering the
bar -- secteam never seems to have free time to review patches.)
Reported by: Lachlan McIlroy <Lachlan.McIlroy AT isilon.com>
Reviewed by: delphij
Approved by: secteam (delphij)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14380
Also correct a typo in the comment for these values, noted by jimharris.
Reviewed by: jimharris
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3715
It was originally written by Sun as part of the STF (Solaris test framework).
They open sourced it in OpenSolaris, then HighCloud partially ported it to
FreeBSD, and Spectra Logic finished the port. We also added many testcases,
fixed many broken ones, and converted them all to the ATF framework. We've had
help along the way from avg, araujo, smh, and brd.
By default most of the tests are disabled. Set the disks Kyua variable to
enable them.
Submitted by: asomers, will, justing, ken, brd, avg, araujo, smh
Sponsored by: Spectra Logic Corp, HighCloud
NVMe support is ready and should be compiled-in
to the ppc64 kernel.
Submitted by: Wojciech Macek <wma@semihalf.org>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
We don't support float in the boot loaders, so don't include
interfaces for float or double in systems headers. In addition, take
the unusual step of spiking double and float to prevent any more
accidental seepage.
or double so ifdef that code out when the numbers aren't float at all.
There's still references in the lmathlib.c, but we don't compile that
for the loader yet.
Differential Revision: https://reviews.freebsd.org/D14472
We need to ensure that we defined Numbers as int64_t everywhere we
build for lua. Previously, we were compiling part of the code with
Numbers as int64_t and part as double. Move lua number definition to a
more-central location
The latter is good, but the former is more elegant and clear about what 'x'
is. Adopt it, preferably only using the latter kind of notation where needed
as values for tables.
2. Sysctls to enable/disable driver_state_dump and error_recovery.
3. Sysctl to control the delay between hw/fw reinitialization and
restarting the fastpath.
4. Stop periodic stats retrieval if interface has IFF_DRV_RUNNING flag off.
5. Print contents of PEG_HALT_STATUS1 and PEG_HALT_STATUS2 on heartbeat
failure.
6. Speed up slowpath shutdown during error recovery.
7. link_state update using atomic_store.
8. Added timestamp information on driver state and minidump captures.
9. Added support for Slowpath event logging
10.Added additional failure injection types to simulate failures.
Added the ability to:
* Create virtual interfaces
* Create vlan interfaces
* Get interface fib
* Get interface groups
* Get interface status
* Get nd6 info
* Get media status
* Get additional ifaddr info in a convenient struct
* Get vhids
* Get carp info
* Get lagg and laggport status
* Iterate over all interfaces and ifaddrs
And add more examples, too.
Note that this is a backwards-incompatible change. But that's ok, because it's
a private library.
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D14463
I've also made some not-insignificant changes/additions to this file, to
include the added constants, ACPI changes, boot environment listing, and
some utility functions.
According to the getpeereid(3) documentation, on failure the value -1 is
returned and the global variable errno is set to indicate the error. We
were returning the error instead.
Obtained from: Apple's Libc-1244.30.3
MFC after: 5 days
search for a thread to steal inside a critical section. Since this
allows the search to be preempted, restart the search if preemption
happens since the search results found earlier may no longer be
valid.
Decrease the latency of starting a thread that may be assigned to
this CPU during the search by polling for incoming threads during
the search and switching to that thread instead of continuing the
search.
Test for stale search results and restart the search before going
through the expense of calling tdq_lock_pair(). Retry some tests
after grabbing the locks since things may have changed while waiting
to get both locks.
Eliminate special case handling for stealing from an SMT peer that
uses 1 as the steal threshold. This can only succeed if a thread
has been assigned but our SMT peer has not yet started executing
it. This is quite rare and when it happens the other SMT thread
is generally waiting for the same tdq lock that we hold. Basically
both SMT threads are racing to grab the same spin lock.
Add the kern.sched.always_steal knob from a ULE patch by jeff@.
Incorporate another idea from Jeff's ULE patch. If the sched_switch()
detects that the CPU is about to go idle, try to steal a thread
before switching to the idle thread. Since the search for a thread
to steal has to be done inside a critical section in this context,
limit the impact on latency by adding the knob kern.sched.trysteal_limit
to limit the topological distance of the search and don't restart
the search if we detect stale results. If this search can't find
an stealable thread, the idle loop can do a more complete search.
Also poll for threads being assigned to this CPU during the search
and switch to them instead of continuing the search. This change
is responsibile for the majority of the improvement in parallel
buildworld times.
In sched_balance_group() change the minimum threshold from stealing
a thread from 1 to 2. Poaching a newly assigned thread from a CPU
that is waking up hasn't yet switched to that thread from idle is
likely very rare and is likely to have the same lock race as is
seen when stealing threads in the idle loop. Also use tdq_notify()
to kick the destintation CPU instead of always sending an IPI.
Update a stale comment, the number of transferable threads is not
calculated.
Reviewed by: kib (earlier version)
Comments by: avg, jeff, mav
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12130
A super-set of the functionality of jedec_ts(4). jedec_dimm(4) reports asset
information (Part Number, Serial Number) encoded in the "Serial Presence
Detect" (SPD) data on JEDEC DDR3 and DDR4 DIMMs. It also calculates and
reports the memory capacity of the DIMM, in megabytes. If the DIMM includes
a "Thermal Sensor On DIMM" (TSOD), the temperature is also reported.
Reviewed by: cem
MFC after: 1 week
Relnotes: yes
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14392
Discussed with: avg, cem
Tested by: avg, cem (previous version, no semantic changes)
Graphics have a tendency to cause 80-col issues, so make an exception to our
standard indentation guidelines for these graphics. This does not hamper
readability too badly.
Two 40-column strings of spaces is trivially replaced with
string.rep(" ", 80)
Add chvgpio(4) driver for Intel Z8xxx SoC family. This product
was formerly known as Cherry Trail but Linux and OpenBSD drivers
refer to it as Cherry View. This driver is derived from OpenBSD
one so the name is kept for alignment with another BSD system.
Submitted by: Tom Jones <tj@enoti.me>
Reviewed by: gonzo, wblock(man page)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13086
r329725 cleaned up ZFS commands duplicated in multiple places, but userboot
was not setting HAVE_ZFS when MK_ZFS != "no". This resulted in a failure to
boot (as seen in PR 226118) in bhyve, with the following message:
/boot/userboot.so: Undefined symbol "ldi_get_size"
PR: 226118
Glanced at by: imp
