holds sndstat_lock across a call to uiomove(), which is not legal
to do with a mutex because of the possibility that the data transfer
could sleep because of a page fault. It is not possible to just
unlock the mutex for the uiomove() call without introducing another
locking mechanism to prevent the body of sndstat_read() from being
re-entered. Converting sndstat_lock to an sx lock is the least
complicated change.
This is a candidate for RELENG_5.
LOR: 030
MFC after: 4 days
example the maximum segment size is 64K while the boundary is set
to 8K due to controller limitations. It is impossible to NOT cross
the boundary for any segment size that's larger than the boundary.
So, once we inherited the boundary from the parent tag, make sure
to reduce the maximum segment size to the boundary if it was larger.
MT5 candidate.
branch prediction optimization for LINT, because the kernel was too
large. This commit now removes it altogether since it causes build
failures for GENERIC kernels and the various applicable trends are
such that one can expect that it these failure will cause more
problems than they're worth in the future. These trends include:
1. Alpha was demoted from tier 1 to tier 2 due to lack of active
support. The number of people willing to fix build breakages
is not likely to increase and those developers that do have the
gumption to test MI changes on alpha are not likely to spend
time fixing unexpected build failures first.
2. The kernel will only increase in size. Even though stripped-down
kernels do link without problems now, compiler optimizations (like
inlining) and new (non-optional) functionality will likely cause
stripped-down kernels to break in the future as well.
So, with my asbestos suit on, get rid of potential problems before
they happen.
MT5 candidate.
redundant at this point and should be retired). Don't free subdevs if
we don't attach any devices. This was leaving stale device_t's
around. Don't touch the device if it isn't attached since the name
isn't meaningful then. Switch from strncpy (properly used) to
strlcpy.
From a patch submitted by Peter Pentchev
device_t instances when no driver attaches. They are left around, and
we need to remember them.
# The usbd_device_handle->subdevs[] array likely is completely bogus
# at this point, but one change at a time, since its removal will need
# to have similar code replace it extracted from newbus.
Part of the patch submitted by Peter Pentchev after an excellent
analysis of the underlying problems.
MFC After: 1 week
across frames. Basically, if the current frame is for the
'dblfault_handler' function, then get the next %eip and %ebp values to use
from the original TSS of the thread that has the saved state when the
double fault triggered.
MFC after: 4 days
produced better results for a test program I had here, it didn't
substantially change the number of crashes that I saw. Both the old
code and the new code seemed to produce the same crashes from the usb
layer. Since the new code also solves a close() crash, go with it
until the underlying issues wrt devices going away can be addressed.
It specifies the default number of retries per a name server.
This makes the code consistent with the manpage and allows to
kill another constant in res_init.c that should have been a
#define'd parameter. (This appears to be a case when the manpage
was better than the code, so the latter was to be fixed.)
PR: bin/62139 (in the audit trail)
it only if we weren't UP before. In some cases xl_init causes long media
re-negotiation, and ppp(8) fails to open PPPoE connection because it sets
IFF_UP every time before opening PPPoE connection.
PR: kern/69133
Patch by: mdodd
Approved by: wpaul, julian (mentor)
MFC after: 1 week
0xffffffff sectors. Document this limit and avoid installing bogus
labels on disks with more sectors.
Allowing the installation of labels addressing as much of the disk as
possiable may be a useful addition in some situations, but this was easy
to implement and should reduce confusion.
PR: bin/71408
BPFD_LOCK() when removing a descriptor from an interface descriptor
list. Hold both over the operation, and do a better job at
maintaining the invariant that you can't find partially connected
descriptors on an active interface descriptor list.
This appears to close a race that resulted in the kernel performing
a NULL pointer dereference when BPF sessions are detached during
heavy network activity on SMP systems.
RELENG_5 candidate.
transaction id from the request, this is useful for debugging.
Fix the autoh_freeall(3) function to properly free the array of
auto handles. Before it was freeing individual members of the list
OK, however it was then advancing the pointer and freeing the wrong
data for the whole list.
to use queue(3) list macros rather than hand-crafted lists. While
here, move to doubly linked lists to eliminate iterating lists in
order to remove entries. This change simplifies and clarifies the
list logic in the BPF descriptor code as a first step towards revising
the locking strategy.
RELENG_5 candidate.
Reviewed by: fenner
(disabled) defid_gen members from u_long to u_int32_t so that alignment
requirements don't cause the structure to become larger than struct fid
on LP64 platforms. This fixes NFS exports of msdos filesystems on at
least amd64.
PR: 71173
Fix a problem in previous: we can't blindly assume that we have
wincnt entries available at the offset the file has been found. If the dos
directory entry is not preceded by appropriate number of long name
entries (happens e.g. when the filesystem is corrupted, or when
the filename complies to DOS rules and doesn't use any long name entry),
we would overwrite random directory entries.
There are still some problems, the whole thing has to be revisited and solved
right.
Submitted by: Xin LI
Fix a panic that occurred when trying to traverse a corrupt msdosfs
filesystem. With this particular corruption, the code in pcbmap()
would compute an offset into an array that was way out of bounds,
so check the bounds before trying to access and return an error if
the offset would be out of bounds.
Submitted by: Xin LI
device and module naming. The following files were repo-copied:
csa.4 -> snd_csa.4
gusc.4 -> snd_gusc.4
maestro3.4 -> snd_maestro3.4
sbc.4 -> snd_sbc.4
uaudio.4 -> snd_uaudio.4
The pcm(4) manpage wasn't renamed to sound(4) as there are nearby
plans to rename "device sound" to "device snd", to address the
ambiguity in naming, so pcm.4 is linked to sound.4 for the moment.
(We also mumble something about the future plans in the manpage.)
Removed links from pcm.4 to als4000.4 and emu10k1.4 -- they now
have their own snd_*.4 manpages.
Fixes for recent snd_*.4 manpages: added missing "device sound"
to the SYNOPSIS, fixed hints (they are still "hint.pcm.<unit>"
in most cases).
MT5 after: 3 days
