The main problem was bitrot after elftoolchain being swapped in for the
GNU toolchain.
This also reworks how the list of 'host allowed' libraries is determined
to only allow INTERNALLIBs, which is needed for libelftc to come in.
For usr.bin/readelf use the same hack, as libelf and libdward, to bring in
the needed sys/ headers for host builds. This has not yet been a problem due
to readelf not being built as a host tool in buildworld. This is possible
in the meta build though when building the toolchain.
Sponsored by: EMC / Isilon Storage Division
Tracking these leads to situations where meta mode will consider the
file to be out of date if /bin/sh or /bin/ln are newer than the source
file. There's no reason for meta mode to do this as make is already
handling the rebuild dependency fine.
Sponsored by: EMC / Isilon Storage Division
This is just as Makefile.inc1 does it for these phases. Otherwise some
of the build tools are not found and used properly, such as 'make-roken'
in the kerberos5 build on older releases.
Sponsored by: EMC / Isilon Storage Division
This was finding libraries that were installed into DESTDIR/usr/lib,
where DESTDIR is the stage directory, and then adding in usr/lib to
DIRDEPS. Just exclude the STAGE_ROOT if defined.
Discussed with: sjg
Sponsored by: EMC / Isilon Storage Division
librtld_db only needs libutil.h to build, not the libproc library. So
it can safely use its header and allow libproc to depend on librtld_rb
to be built first to link. This is required after fixing ld --sysroot
in r291226.
Sponsored by: EMC / Isilon Storage Division
This has caused much confusion for myself as there are quite a lot of
variables that depend on having a proper ${.OBJDIR}.
Sponsored by: EMC / Isilon Storage Division
Because of how osreldate.h was being built with newvers.sh, which always
spat out a vers.c dependent on SVN or git, the meta mode build was
considering osreldate.h to depend on the current git or SVN index. This
would lead to entire tree rebuilds when modifying git's index. There's
no reason to be generating vers.c here so just skip it.
While here, in mk-osreldate.sh rename PARAM_H to proper PARAMFILE (which
newvers.sh already has a default for) and remove unneeded export.
Sponsored by: EMC / Isilon Storage Division
For this case, the normal META MODE staging logic should be used. The
BSARGS having DESTDIR= is due to Makefile.inc1 overriding DESTDIR to
something when appropriate. For the toolchain stage META MODE is in charge of
it, not Makefile.inc1.
At least include/, if staging it to the host stagedir, was impacted from
this. Staging of include.host is not yet done.
Sponsored by: EMC / Isilon Storage Division
This both avoids some dependencies on xinstall.host and allows
bootstrapping on older releases to work due to lack of at least 'install -l'
support.
Sponsored by: EMC / Isilon Storage Division
A stray trailing space snuck in with one of the recent
changes, making r290550 and r290573 effectively no-op.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
I added MYBEACON support a while ago to listen to beacons that are only
for your configured BSSID. For AR9380 and later NICs this results in
a lot less chip wakeups in station mode as it then only shows you beacons
that are destined to you.
However in IBSS mode you really do want to hear all beacons so you can do
IBSS merges. Oops.
So only use MYBEACON for STA + not-scanning, and just use BEACON for
the other modes it used to use BEACON for.
This doesn't completely fix IBSS merges though - there are still some
conditions to chase down and fix.
I've seen some cases where we get stuck in a loop constantly trying to
negotiate A-MPDU TX which is definitely not supposed to happen.
This will let me see if it's something funky with the retry count or
not.
only for read locks on pcbs. The same race can happen with write
lock semantics as well.
The race scenario:
- Two threads (1 and 2) locate pcb with writer semantics (INPLOOKUP_WLOCKPCB)
and do in_pcbref() on it.
- 1 and 2 both drop the inp hash lock.
- Another thread (3) grabs the inp hash lock. Then it runs in_pcbfree(),
which wlocks the pcb. They must happen faster than 1 or 2 come INP_WLOCK()!
- 1 and 2 congest in INP_WLOCK().
- 3 does in_pcbremlists(), drops hash lock, and runs in_pcbrele_wlocked(),
which doesn't free the pcb due to two references on it.
Then it unlocks the pcb.
- 1 (or 2) gets wlock on the pcb, runs in_pcbrele_wlocked(), which doesn't
report inp as freed, due to 2 (or 1) still helding extra reference on it.
The thread tries to do smth with a disconnected pcb and crashes.
Submitted by: emeric.poupon@stormshield.eu
Reviewed by: gleb@
MFC after: 1 week
Sponsored by: Stormshield
Tested by: Cassiano Peixoto, Stormshield
The indent_wrapper tool only accepts full context diffs and works by
identifying the surrounding C-block touched by a diff and passing only
that to indent for styling. In the end a diff is produced or an
external tool like meld can be invoked, to show the styling
differences.
Use hhook(9) framework to achieve ability of loading and unloading
if_enc(4) kernel module. INET and INET6 code on initialization registers
two helper hooks points in the kernel. if_enc(4) module uses these helper
hook points and registers its hooks. IPSEC code uses these hhook points
to call helper hooks implemented in if_enc(4).
And expose vm_memattr_t of current mapping to consumers (as well as the
ability to change it to one of UC, WB, WC).
After short discussion with: jhb (but no review)
Sponsored by: EMC / Isilon Storage Division
- Add error handling for urtwn_(r88e_)read_rom() and
urtwn_efuse_*() functions.
- Remove code duplication between urtwn_efuse_read() and
urtwn_r88e_read_rom().
- Merge r88e_rom and (r92c_)rom structures
(only one of them can be used at the same time).
- Other minor fixes / improvements.
Tested with RTL8188EU, STA mode
(URTWN_DEBUG + USB_DEBUG, hw.usb.urtwn.debug=3, no visual differences).
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4253
Adds a new tunable, ntb.hw.b2b_mw_idx, which specifies the offset (from the
total number of memory windows) to use for register access on hardware with
the SDOORBELL_LOCKUP errata. The default is -1, i.e., the last memory
window.
We map BARs before the b2b_mw_idx is selected, so map them all as memory
windows initially. The register memory window should not be write-combined,
so we explicitly disable WC on the selected MW later.
This introduces a layer of abstraction between consumer memory window
indices, which exclude any exclusive errata-workaround BARs, and internal
memory window indices, which include such BARs. An internal routine,
ntb_user_mw_to_idx(), converts the former to the latter. Public APIs have
been updated to use this instead of assuming the exclusive workaround BAR is
the last available MW.
Sponsored by: EMC / Isilon Storage Division
Replace tlb_flush_local() by tlb_flush() as even not global mappings
could be fetched to TLB(s) on other cores by speculative table walk.
From OS point of view, it was not a problem as either such mappings
were not used anymore or they were flushed from TLB(s) when reused.
However, from hardware point of view, it was a problem. Not flushed
mappings could be a target for speculative reads or prefetches (which
might be quite aggresive on ARM cores). As speculative read can fill
cacheline, it can cause a real problem, when physical page is reused,
but mapped with different memory attributes.
Anyhow, it's good to have only valid mappings in TLB(s).
Approved by: kib (mentor)
place physical memory at an address outside the old DMAP range. This is an
issue as we rely on being able to move from PA -> VA using this range.
Obtained from: Patrick Wildt <patrick@bitrig.org> (earlier version)
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D3885
targets. See the comment above wantfreevnodes variable for the
description of the algorithm.
The vfs.vlru_alloc_cache_src sysctl is removed. New code frees
namecache sources as the last chance to satisfy the highest watermark,
instead of selecting the source vnodes randomly. This provides good
enough behaviour to keep vn_fullpath() working in most situations.
The filesystem layout with deep trees, where the removed knob was
required, is thus handled automatically.
Submitted by: bde
Discussed with: mckusick
Tested by: pho
MFC after: 1 month
lwsync instruction, which does not provide Store/Load barrier. Fix
this by using "full" sync barrier for mb().
atomic_store_rel() does not need full barrier, change mb() call there
to the lwsync instruction if not hitting the known CPU erratas
(i.e. on 32bit). Provide powerpc_lwsync() helper to isolate the
lwsync/sync compile time selection, and use it in atomic_store_rel()
and several other places which duplicate the code.
Noted by: alc
Reviewed and tested by: nwhitehorn
Sponsored by: The FreeBSD Foundation
It included libutil.h for setproctitle(3), which was moved from libutil to libc
in r65353 in 2000.
Reviewed by: gshapiro [sendmail change]
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4261
This should be a big no-op pass; and reduces the size of if_ath.c.
I'm hopefully soon going to take a whack at the USB support for ath(4)
and this'll require some reuse of the busdma memory code.
values when the data set has an even number of elements.
PR: 201582
Submitted by: Marcus Reid <marcus@blazingdot.com>
Reviewed by: imp
Approved by: bapt (mentor)
