Some BIOSes incorrectly use standard memory resource ranges to list
the memory ranges that they decode for downstream devices rather than
creating ResourceProducer range resource entries. The result is that
we allocate the full range to the PCI root bridge device causing
allocations in child devices to all fail.
As a workaround, ignore any standard memory resources on a PCI root
bridge device. It is normal for a PCI root bridge to allocate an I/O
resource for the I/O ports used for PCI config access, but I have not
seen any PCI root bridges that legitimately allocate a memory resource.
Import libucl into head
UCL is heavily infused by nginx configuration as the example of a convenient
configuration system. However, UCL is fully compatible with JSON format and is
able to parse json files.
UCL is used by pkg(8) for its configuration file as well for the manifest format
in packages, it will be used in base for the pkg boostrap (signature checking
and configuration file parsing.)
libucl has been developped and is maintained by vsevolod@
Make it possible to use the env kernel config file option for AVILA
and CAMBRIA boards that does not use loader to load the kernel. This
is basically how it was done for i386. This way tunables can also be
set. For example in config file:
env "/conf/AVILA.env"
And in AVILA.env:
vfs.unmapped_buf_allowed=0
Add support for MegaRAID Fury cards. The main change needed to boot from a
9341-4i controller was to ensure that scatter/gather lists are ended with
an end-of-list marker. Both the mrsas and Linux megaraid_sas drivers use
this marker with Invader cards as well, so we do the same thing, though
it is apparently not strictly necessary.
PR: 187312
Add fetch and patch to .PHONY and .NOTMAIN only if PORTNAME is defined.
Unconditional addition cause real fetch(1) and patch(1) programs are
builded every time.
This is a MFC of all the commits listed below.
My original goal of this change was to only merge the move of the tests
from tools/regression/bin/ into the new layout (which include tests for
sh(1) and other tools as well). However, doing so is tricky due to the
ongoing work in sh(1) and, especially, the many changes to its tests
since stable/10 was first branched.
Merging everything is the simplest way to achieve this goal and, as a
bonus point, we get various fixes and miscellaneous improvements into
the branch.
Per jilles' suggestion, I'm avoiding the merge of a couple of changes
(r256850 and r257506) that required depending kernel changes. I'm also
avoiding very recent changes that have not had a long enough time to be
validated in current.
This is "make tinderbox" clean.
r256735 sh: Remove one syscall when waiting for a foreground job.
r257399 sh: Allow trapping SIGINT/SIGQUIT after ignore because of '&'.
r257504 sh: Reorder union node to reduce its size on 64-bit platforms.
r257920 sh: Add a test case for would-be assignments that are not due to quoting.
r257929 sh: Properly quote alias output from command -v.
r258489 sh: Add tests for the </dev/null implicit in a background command.
r258533 sh: Add more tests for the </dev/null implicit in a background command.
r258535 sh: Make <&0 disable the </dev/null implicit in a background command.
r258776 sh: Prefer memcpy() to strcpy() in most cases. Remove the scopy macro.
r259047 sh: Split set -x output into a separate function.
r259210 Migrate tools/regression/bin/ tests to the new layout.
r259844 sh: Remove an unused variable.
r259846 sh: Initialize OPTIND=1 even if it came from the environment.
r259874 sh: Simplify code related to PPID variable.
r259946 sh: Don't check input for non-whitespace if history is disabled.
r260246 sh(1): Discourage use of -e.
r260506 Run the sh(1) and test(1) tests as unprivileged.
r260586 Mark the bin/pax tests as requiring perl.
r260634 Use TAP_TESTS_PERL to register the legacy_test in bin/pax.
r260635 Replace hand-crafted Kyuafiles with automatic generation.
r260654 sh: Remove SIGWINCH handler and just check for resize before every read.
r261121 sh: Add test for nested alias.
r261125 sh: Solve the alias recursion problem in a less hackish way.
r261141 sh: Do not depend on parse/execute split in new alias test.
r261160 sh: Add tests for alias names after another alias.
r261192 sh: Allow aliases to force alias substitution on the following word.
r262533 sh: Make expari() static.
r262565 sh: Do not corrupt internal representation if LINENO inner expansion fails.
r262697 sh: Simplify expari().
Reviewed by: jilles
When querying a process's umask via sysctl in libprocstat(), don't
print a warning if EPERM is returned as this is an expected failure
mode rather than error -- similar to current handling of ESRCH.
This makes the output of 'procstat -as' vastly more palatable.
Sponsored by: DARPA, AFRL
Simplify the way the end of a singly linked list is followed (for adding
items), so it is more obvious that we aren't going to indirect through
a NULL pointer.
PR: 144723
Submitted by: Garrett Cooper <yaneurabeya at gmail.com>
Obtained from: NetBSD r1.19
ssh-copy-id: avoid sending private keys; add -v option
To help avoid confusion: when attempting to send a key file check to see if a
file of the same name exists with a '.pub' suffix and send that instead. This
mimics the behavior of other ssh-copy-id scripts.
Add -v passthrough.
ssh-copy-id: add restorecon call
In certain situations when creating an authorized_key file on a Linux machine
restorecon(1) may need to be called. Therefore, attempt to run it if it exists.
If rare conditions such as concurrent conflicting manipulation of the
filesystem occur, fts_read() frees the current FTSENT without adjusting
the pointers in the FTS accordingly. A later fts_close() then frees the
same FTSENT again.
test_eagain_*_* should've been using nonblocking sockets instead of blocking
sockets. The error was not exposed as long as the kernel suffered from PR
kern/185812. Now corrected, these tests pass on DragonFlyBSD 3.6.0.
259203,259221,259261,259532,259615,259650,259651,259667,259680,259727,
259761,259772,259776,259777,259830,259882,259915,260160,260449,260450,
260688,260888,260953,261269,261547,261551,261552,261553,261585:
Merge the vt(4) driver (newcons) to stable/10.
Approved by: ray
Restore SIM freeze/release match, broken at r253549.
This fixes problem with SIM left in frozen state after reinit, for example,
after firmware update.
Pass proper pointer to bus_dmamem_free() in mps_iocfacts_free().
Passing there pointer into the middle of allocated area caused kernel
panic during reinit, for example, after firmware upgrade.
- r260505 Allow tests to provide a Kyuafile when they relied on auto-generation.
- r260525 Respect the original layout of the atf-{c,c++} tests.
- r260526 Fix path to the process_helpers for the libatf-c++ tests.
- r260576 Generate and install pkg-config files for atf.
- r260577 Add atf pkg-config files from the vendor branch.
- r260584 Prevent misc_helpers from running as a test.
So, it turns out SIGCHLD is discarded by default, so we have to set up
a dummy handler to make it interrupt an ioctl(2) or select(2).
This makes those short-lived iscsid(8) zombies disappear.
Sponsored by: The FreeBSD Foundation
The log_whatever() routines don't accept NULL for format strings,
so mark them as __printflike instead of __printf0like.
Sponsored by: The FreeBSD Foundation
There is no need to prevent iscsictl from adding iSER session when there
is no iSER support in ctld and/or kernel; should the user make that mistake,
the output from "iscsictl -L" is enough to determine what the problem is.
Sponsored by: The FreeBSD Foundation
Make it clear that there are two ways to add a session using iscsictl(8),
and some options require configuration file.
Sponsored by: The FreeBSD Foundation
Make iscsictl(8) properly handle (optional) semicolons in iscsi.conf,
instead of ignoring them and echoing them to stdout.
Sponsored by: The FreeBSD Foundation
r261832:
Add cross references between rc.conf(5) and jail.conf(5).
r261833:
Add commas (,) to the list in the SEE ALSO section, to match most
other manuals.
r261834:
Bump .Dd forgotten in r261832.
Import libc++ 3.4 release. This contains a lot of bugfixes, and some
preliminary support for C++1y.
MFC r261604:
HEAD is not buildable for the past day. Commit a 'quick fix' in order to permit
buildworld to complete.
Reviewed by: theraven
MFC r261608:
Apply a cleaner solution for the sign warnings that can occur when
compiling libc++'s <locale> header with -Wsystem-headers on.
This has also been submitted upstream.
Reported by: asomers
MFC r261801:
An ABI incompatibility crept into the libc++ 3.4 import in r261283. It
was caused by upstream libc++ commit r194536, which aimed to make the
headers more standards-compliant, by making std::pair's copy constructor
trivial. Unfortunately, this could cause certain C++ applications using
shared libraries built against the previous version of libc++ to crash.
Fix the ABI incompatibility by making std::pair's copy constructor
non-trivial again.
Please note: Any C++ applications or shared libraries built with libc++
between r261283 and this revision should be recompiled.
Reported by: stefanf
r262499:
release.sh:
- Add a VCSCMD variable that defaults to 'svn checkout',
and update places 'svn co' is used directly.
- After sourcing a configuration file, prefix SRCBRANCH,
PORTBRANCH, and DOCBRANCH with the SVNROOT.
- Properly capitalize 'FreeBSD.org' in the default SVNROOT.
- Update Copyright.
release.conf.sample:
- Add an example to use git instead of svn, by nullifying
SVNROOT, and setting SRCBRANCH, DOCBRANCH, and PORTBRANCH
to the URL fo a git repository.
release.7:
- Document VCSCMD.
r262505:
In release/Makefile, remove exclusion of CVS directories in the
src/ and ports/ distributions.
While I am thinking about it, exclude .git directories for src/
and ports/, as somewhat of a followup to r262499.
r262507:
Chase r262505, and remove CVS exclusion from picobsd builds.
r262509:
Rework how WORLD_FLAGS and KERNEL_FLAGS are set, to remove an
unnecessary expr(1) call.
Sponsored by: The FreeBSD Foundation
There are a number of reports of userspace application crashes that
are "solved" by setting vm.pmap.pcid_enabled=0, including Java and the
x11/mate-terminal port (PR ports/184362).
For now apply a band-aid of disabling pcid by default in stable/10.
Sponsored by: The FreeBSD Foundation
While it isn't too late and kvm_read_zpcpu() function isn't yet used
outside libkvm(3), change its order of arguments, so that it is the
same as in kvm_read().
Merge r261805 from head:
Add kvm_getncpus() to obtain mp_ncpus.
