It was actually done in r86301 but reverted in r150182 because GCC 3.x was
not able to handle it for a memory operand. Apparently, this problem was
fixed in GCC 4.1+ and several contrib sources already rely on this feature.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zio_compress.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zio_compress.c:
Add module lifetime functions to allocate and teardown
state data.
Report:
- Compression attempts.
- Buffers found to be empty.
- Compression calls that are skipped because
the data length is already less than or
equal to the minimum block length.
- Compression attempts that fail to yield a 12.5%
compression ratio.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/dmu.c:
Add calls to the zio_compress.c module's init and fini
functions.
Sponosred by: Spectra Logic Corporation
MFC after: 2 weeks
Add MAC framework entries for posix shm read and write.
Do not allow implicit extension of the underlying memory segment past
the limit set by ftruncate(2) by either of the syscalls. Read and
write returns short i/o, lseek(2) fails with EINVAL when resulting
offset does not fit into the limit.
Discussed with: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
The TI uart hardware is ns16550-compatible, except that before it can
be used the clocks and power have to be enabled and a non-standard
mode control register has to be set to put the device in uart mode
(as opposed to irDa or other serial protocols). This adds the extra
code in an extension to the standard ns8250 probe routine, and the
rest of the driver is just the standard ns8250 code.
This makes it easier to implement new drivers which are "mostly ns8250"
but with some small difference such as needing to enable clocks or poke
a non-standard register at probe or attach time.
minimum allocation size for devices. Use this information to
automatically increase ZFS's minimum allocation size for new top-level
vdevs to a value that more closely matches the optimum device
allocation size.
Use GEOM's stripesize attribute, if set, as the physical sector
size of the GEOM.
Calculate the minimum blocksize of each metaslab class. Use the
calculated value instead of SPA_MINBLOCKSIZE (512b) when determining
the likelyhood of compression yeilding a reduction in physical space
usage.
Report devices with sub-optimal block size configuration in "zpool
status". Also properly fail attempts to attach devices with a
logical block size greater than 8kB, since this will cause corruption
to ZFS's label area.
Sponsored by: Spectra Logic Corporaion
MFC after: 2 weeks
Background
==========
Many modern devices use physical allocation units that are much
larger than the minimum logical allocation size accessible by
external commands. Two prevalent examples of this are 512e disk
drives (512b logical sector, 4K physical sector) and flash devices
(512b logical sector, 4K or larger allocation block size, and 128k
or larger erase block size). Operations that modify less than the
physical sector size result in a costly read-modify-write or garbage
collection sequence on these devices.
Simply exporting the true physical sector of the device to ZFS would
yield optimal performance, but has two serious drawbacks:
1) Existing pools created with devices that have different logical
and physical block sizes, but were configured to use the logical
block size (e.g. because the OS version used for pool construction
reported the logical block size instead of the physical block
size) will suddenly find that the vdev allocation size has
increased. This can be easily tolerated for active members of
the array, but ZFS would prevent replacement of a vdev with
another identical device because it now appears that the smaller
allocation size required by the pool is not supported by the new
device.
2) The device's physical block size may be too large to be supported
by ZFS. The optimal allocation size for the vdev may be quite
large. For example, a RAID controller may export a vdev that
requires read-modify-write cycles unless accessed using 64k
aligned/sized requests. ZFS currently has an 8k minimum block
size limit.
Reporting both the logical and physical allocation sizes for vdevs
solves these problems. A device may be used so long as the logical
block size is compatible with the configuration. By comparing the
logical and physical block sizes, new configurations can be optimized
and administrators can be notified of any existing pools that are
sub-optimal.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/spa.h:
Add the SPA_ASHIFT constant. ZFS currently has a hard upper
limit of 13 (8k) for ashift and this constant is used to
both document and enforce this limit.
sys/cddl/contrib/opensolaris/uts/common/sys/fs/zfs.h:
Add the VDEV_AUX_ASHIFT_TOO_BIG error code.
Add fields for exporting the configured, logical, and
physical ashift to the vdev_stat_t structure.
Add VDEV_STAT_VALID() macro which can be used to verify the
presence of required vdev_stat_t fields in nvlist data.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c:
Provide a SYSCTL_PROC handler for "max_auto_ashift". Since
the limit is only referenced long after boot when a create
operation occurs, there's no compelling need for it to be
a boot time configurable tunable. This also allows the
validation code for the max_auto_ashift value to be contained
within the sysctl handler.
Populate the new fields in the vdev_stat_t structure.
Fail vdev opens if the vdev reports an ashift larger than
SPA_MAXASHIFT.
Propogate vdev_logical_ashift and vdev_physical_ashift between
child and parent vdevs as is done for vdev_ashift.
In vdev_open(), restore code that fails opens for devices
where vdev_ashift grows. This can only happen now if the
device's logical ashift grows, which means it really isn't
safe to use the device.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/vdev_impl.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_file.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_geom.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_mirror.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_missing.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_raidz.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev_root.c:
Update the vdev_open() API so that both logical (what was
just ashift before) and physical ashift are reported.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/vdev_impl.h:
Add two new fields, vdev_physical_ashift and vdev_logical_ashift,
to vdev_t.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/vdev.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/spa_config.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/spa.c:
Add vdev_ashift_optimize(). Call it anytime a new top-level
vdev is allocated.
cddl/contrib/opensolaris/cmd/zpool/zpool_main.c:
Add text for the VDEV_AUX_ASHIFT_TOO_BIG error.
For each sub-optimally configured leaf vdev, report configured
and native block sizes.
cddl/contrib/opensolaris/cmd/zpool/zpool_main.c:
cddl/contrib/opensolaris/lib/libzfs/common/libzfs.h:
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_status.c:
Introduce a new zpool status: ZPOOL_STATUS_NON_NATIVE_ASHIFT.
This status is reported on healthy pools containing vdevs
configured to use a block size smaller than their reported
physical block size.
cddl/contrib/opensolaris/lib/libzfs/common/libzfs_status.c:
Update find_vdev_problem() and supporting functions to
provide the full vdev_stat_t structure to problem checking
routines, and to allow decent into replacing vdevs.
Add a vdev_non_native_ashift() validator which is used on
the full vdev tree to check for ZPOOL_STATUS_NON_NATIVE_ASHIFT.
cddl/contrib/opensolaris/lib/libzpool/common/kernel.c:
cddl/contrib/opensolaris/lib/libzpool/common/sys/zfs_context.h:
Enhance sysctl userland stubs now that a SYSCTL_PROC handler
is used in vdev.c.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/metaslab.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/metaslab_impl.h:
When the group membership of a metaslab class changes (i.e.
when a vdev is added or removed from a pool), walk the group
list to determine the smallest block size currently available
and record this in the metaslab class.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/metaslab.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/metaslab.c:
Add the metaslab_class_get_minblocksize() accessor.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/sys/zio_compress.h:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zio_compress.c:
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/arc.c:
In zio_compress_data(), take the minimum blocksize as an
input parameter instead of assuming SPA_MINBLOCKSIZE.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/arc.c:
In l2arc_compress_buf(), pass SPA_MINBLOCKSIZE as the minimum
blocksize of the device. The l2arc code performs has it's own
code for deciding if compression is worth while, so this
effectively disables zio_compress_data() from second guessing
the original decision.
sys/cddl/contrib/opensolaris/uts/common/fs/zfs/zio.c:
In zio_write_bp_init(), use the minimum blocksize of the
normal metaslab class when compressing data.
device compatible with multiple drivers matches the more specific driver
first and doesn't overwrite it later with the more generic. Move the
generic ns16550 to the end of the list.
Fix handling of braced-init-list as reference initializer within
aggregate initialization. Previously we would incorrectly require an
extra set of braces around such initializers.
Pull in r188718 from upstream clang trunk:
Handle init lists and _Atomic fields.
Fixes PR16931.
These fixes are needed for the atomic_flag type to work correctly in our
stdatomic.h.
Requested by: theraven
PR16727: don't try to evaluate a potentially value-dependent
expression when checking for missing parens in &&/|| expressions.
This fixes an assertion encountered when building the lang/sdcc port.
Reported by: kwm
The MMCHS hardware is pretty much a standard SDHCI v2.0 controller with a
couple quirks, which are now supported by sdhci(4) as of r254507.
This should work for all TI SoCs that use the MMCHS hardware, but it has
only been tested on AM335x right now, so this enables it on those platforms
but leaves the existing ti_mmchs driver in place for other OMAP variants
until they can be tested.
This initial incarnation lacks DMA support (coming soon). Even without it
this improves performance pretty noticibly over the ti_mmchs driver,
primarily because it now does multiblock IO.
This is a workaround to hide the fact that we do not have any code to
demote a superpage mapping before we unmap a single page that is part
of the superpage.
r254466 increased the KVA from 512GB to 2TB which requires 4 PDP pages as
opposed to a single one before the change. This broke minidumpsys() since
it assumed that the entire KVA could be addressed via a single PDP page.
Fix this by obtaining the address of the PDP page from the PML4 entry
associated with the KVA being dumped.
Reported by: pho
Submitted by: kib
Pointy hat to: neel
shown to negatively impact some workloads and the goal is only to
eliminate worst case behaviors for very long periods of paging
inactivity. Eventually we should determine a more complex scaling
factor for this feature.
- Rate limit low memory callback handlers to limit thrashing. Set the
default to 10 seconds.
Sponsored by: EMC / Isilon Storage Division
that don't support superpages. This keeps the number of spans and internal
fragmentation lower.
- When the user asks for alignment from vmem_xalloc adjust the imported size
by 2*align to be certain we can satisfy the allocation. This comes at
the expense of potential failures when the backend can't supply enough
memory but could supply the requested size and alignment.
Sponsored by: EMC / Isilon Storage Division
There is no need for calling vm_page_dirty() when clearing "modified" flag as
it is already set for that page in pmap_fault_fixup() or pmap_enter() thanks
to "modified" bit emulation.
Also, there is no need for checking PTE "referenced" or "writeable" flags. If
there is a request to clear a particular flag we should just do it.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: gber
Sponsored by: The FreeBSD Foundation, Semihalf
Last input argument in pmap_modify_pv() should be a mask of flags to be set.
In pmap_change_wiring() however, the straight wired status was used, which
does not represent valid flags (and is of type boolean).
This commit fixes the issue so that wired flag is passed to pmap_modify_pv()
properly.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: gber
Sponsored by: The FreeBSD Foundation, Semihalf
Revise L2_S_PROT_MASK to include all of the protection bits. Notice that
clearing these bits does not always take away the corresponding permissions
(for example, permission is granted when the bit is cleared). The bits are
cleared but are to be set or left cleared accordingly in pmap_set_prot(),
pmap_enter_locked(), etc.
Clear L2_XN along with L2_S_PROT_MASK in pmap_set_prot() so that all
permissions related bits are cleared before actual configuration.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: gber
Sponsored by: The FreeBSD Foundation, Semihalf
- PGA_WRITEABLE indicates that there *might be* a writable mapping for the
particular page, so to avoid frequent sweeping of the pv_entries whenever
pmap_nuke_pv(), pmap_modify_pv(), etc. is called, it is sufficient to
clear that flag if there are no managed mappings for that page anymore
(notice that only pmap_enter is authorized to set this flag).
- Avoid redundant checking for PVF_WIRED flag when this flag cannot be set
anyway.
- Clear PGA_WRITEABLE only once for each vm_page instead of multiple,
redundant clearing it in loop when there are no writeable mappings
to that page anymore.
Submitted by: Zbigniew Bodek <zbb@semihalf.com>
Reviewed by: gber
Sponsored by: The FreeBSD Foundation, Semihalf
