required in such a case). But don't prevent the user from pointing the
gun at his/her foot -- you can disable 4k alignment after enabling geli).
MFC after: 3 days
and subsequent headaches caused by multiple pools with the same name.
Specifically, blast away any labels on the designated swap partition.
Problem was when you install to a given layout *with* swap and then turn
around and re-install the same layout *without* swap (we weren't doing a
labelclear for the swap device, so would end up with an "UNAVAIL" status
zroot pool that may only exist in the pool cache).
MFC after: 3 days
+ For GPT, always provision zfs# partition after swap [for resizability]
+ For MBR, always use a boot pool to relialy place root vdevs at EOD
NB: Fixes edge-cases where MBR combination failed boot (e.g. swap-less)
+ Generalize boot pool logic so it can be used for any scheme (namely MBR)
+ Update existing comments and some whitespace fixes
+ Change some variable names to make reading/debugging the code easier
in zfs_create_boot() (namely prepend zroot_ or bootpool_ to property)
+ Because zroot vdevs are at EOD, no longer need to calculate partsize
(vdev consumes remaining space after allocating swap)
+ Optimize processing of disks -- no reason to loop over the disks 3-4
separate times when we can logically use a single loop to do everything
Discussed on: -stable
MFC after: 3 days
+ De-obfuscate debugging to show actual values
+ Change graid(8) syntax; s/destroy/delete/ [destroy is not invalid syntax]
+ Log commands that were previously quiet
+ Added some new comemnts and updated some existing ones
+ Add missing local for `disk' used in zfs_create_boot()
+ Use $disks instead of multiply-expanding $* in zfs_create_boot()
+ Pedantically unset variable holding geli(8) passphrase after use
+ Pedantically add double-quotes around zpool names and zfs datasets
+ Fix quotation expansion for zpool_cache entries of loader.conf(5)
+ Some limited whitespace changes
MFC after: 3 days
https://communities.vmware.com/thread/107230https://communities.vmware.com/docs/DOC-11677
Basically, ignore the ``function 62'' and ``function 63'' interpretations
of the left/right command key when we're in the lengthiest portion of the
installation (initiated by the `auto' module).
The net effect is that you can now (once you've started the installer from
the media) escape the VM without prematurely terminating the current action
due to spurious escape sequence.
MFC after: 3 days
===
DEBUG: Running installation step: services
local: Not in a function
/usr/libexec/bsdinstall/services: cannot create : Read-only file system
/usr/libexec/bsdinstall/services: /tmp/bsdinstall/etc/rc.conf.services: \
Permission denied
===
The `local: Not in a function' is obvious, and was introduced by myself in
SVN revision 256348.
The latter two are caused by the attempt to use "\" to continue the line
after using the ">>" redirect. This appears to attempt to write a file with
the name " " in the current directory and subsequently attempts to execute
the file that was originally intended for writing (which is not executable;
hence the `Permission denied'). That was introduced in SVN r228192 about
2 years ago, apparently unnoticed until I started going over the debug
outputs very carefully.
MFC after: 3 days
after attempting to install to encrypted ZFS root (caused by a typo in a
variable name -- ZFSBOOT_BOOT_FSNAME -> ZFSBOOT_BOOTFS_NAME).
MFC after: 3 days
The effects of this patch would only be noticeable if you were purposefully
setting a bad value and trying to see what happens; and leaving the disks
intact if a bad value has been set seems fair.
+ Add a `-D FILE" command-line option for overriding the path to the
bsdinstall log file (BSDINSTALL_LOG env var).
+ Document new `-D FILE' in the man page for bsdinstall.
+ If FILE in `-D FILE' begins with a +, debug output goes to stdout
(interleaved between dialog(1) invocations/output) as well as to FILE
(minus the leading + of course).
+ If BSDINSTALL_LOG cannot be written, then debugging is disabled (except in
the case of a leading + in the pathname, wherein debug will still be
printed to stdout).
+ Update source code formatting style.
+ Fix a dangling participle ("Begun ..." -> "Began ...")
+ Rewrite the docsinstall script (was necessary to abate direct dependency
on BSDINSTALL_LOG (instead, use fault-tolerant bsdconfig framework which
displays appropriate errors for package management).
NB: docsinstall is still using pkg(8) after this change.
+ Add additional debug output for dhclient/rtsol/wpa_cliscan
+ Display script errors in a textbox rather than just on stdout
+ Update many coments.
+ Add new f_show_err() API call (like f_show_msg but changes the dialog
title to "Error")(see bsdconfig's `common.subr').
+ Add new f_eval_catch() API call for executing a command via eval but not
before logging the command to debug. Several example cases documented in
API header for function in bsdconfig's `common.subr'.
+ Fix dialog auto-sizing when launched as an rvalue to a pipe for indirected
scripts (previously would default to 24x80 sizing in this case, now it can
autosize to full size even when in a pipe chain).
+ Fix bug in f_snprintf if $format argument began with "-"; printf would
misinterpret as a flag. (this is in bsdcofig's `strings.subr').
+ Add accompanying f_sprintf() and f_vsprintf() to go along with already
existing f_snprintf() and f_vsnprintf() (see bsdconfig's `strings.subr').
+ Remove some unnecessary default ZFS datasets from the automatic "zfsboot"
script. Such as: /usr/ports/distfiles /usr/ports/packages /usr/obj /var/db
/var/empty /var/mail and /var/run (these can all be created as-needed once
the system is installed).
+ Remove setuid=off for /usr/home (as discussed from last round of CFT).
+ Fix some i18n string violations in "zfsboot".
+ Bolster debugging output in "zfsboot".
+ Fix some string quoting issues in "zfsboot".
+ Fix some variable scope issues in "zfsboot".
+ Change "Create" to "Install" in "zfsboot" main menu.
+ Increase error checking in "zfsboot" (type-check arguments and such).
+ Add call to "graid destroy" killing automatic metadata (part of the series
of pedantic destructions we do when bootstrapping a new/naked disk).
+ Make judicious use of new f_eval_catch() in "zfsboot".
+ Fixup some variable names for consistency (zfsboot).
+ Fix an underride syntax parameter expansion folly (zfsboot).
+ Confirm layout if not explicitly chosen when blindly proceeding (no
longer have to touch anything on the ZFS menu if it scares you, just
choose the omnibus "Install" option at the top and you'll be prompted to
select vdev type and disks in the layout confirmation dialog).
+ Change numbered menu items to alphabetic for more efficient navigation.
+ Consolidate vdev selection and disk selection into a single stateful
menu which performs validation and allows backing out to each previous
menu as you go deeper.
+ Redesign the ``Last Chance'' dialog (still using the same colors, but
make it conform to a tolerable width and make disks appear in a block-
quote style indented region).
+ Fix a bug wherein we used the a lowercase variable name by accident
(actual variable name declared as all-uppercase) at the time of
initializing fstab(5) (not believed to cause any issues though).
+ Update the geli setup infobox for each provider being initialized
(not just at the onset -- since each ``geli init'' causes kernel messages
to push our infobox off-screen).
Reviewed by: Allan Jude <freebsd@allanjude.com>
Discussed on: -current
MFC after: 3 days
and OpenSolaris/Illumos beadm use.
Remove /usr/local and /var/db/pkg datasets. Andriy Gapon writes:
I want to note that a good implementation of BEs should support a dependent
datasets feature. Unfortunately, it seems that we do not have any good BE
implementation for FreeBSD right now. If we had, personally I'd prefer to
have /usr/local in separate filesystem.
NOTE: Until then, remove these datasets.
Discussed on: src-committers
Submitted by: Bryan Drewery <bryan@shatow.net>
Reviewed by: Allan Jude <freebsd@allanjude.com>
MFC after: 3 days
so bootpool is imported after boot:
zpool_cache_load="YES"
zpool_cache_type="/boot/zfs/zpool.cache"
zpool_cache_name="/boot/zfs/zpool.cache"
otherwise /boot is a broken symlink after the system is up.
http://lists.freebsd.org/pipermail/freebsd-fs/2013-July/017891.html
NOTE: Fix a comment while here.
Reviewed by: gjb
services configuration and enable it by default. Committed with
slight change to menu text for length and content.
Submitted by: Allan Jude <freebsd@allanjude.com>
Approved by: re (glebius)
Patch from PR modified slightly for whitespace and style.
PR: bin/161547
Submitted by: Warren Block <wblock@wonkity.com>
Reviewed by: Allan Jude <freebsd@allanjude.com>
Approved by: re (glebius)
keymaps *and* provide a mechanism for testing the selection. With
this commit, bsdinstall is no longer dependent on kbdmap(1). The
keymap test menu was originally submitted by Warren Block but was
modified).
Submitted by: Warren Block <wblock@wonkity.com>
Reviewed by: Allan Jude <freebsd@allanjude.com>
Approved by: re (glebius)
to run interactively but it can be scripted too (optinally completely
non-interactive). Currently supports GELI and all ZFS vdev types. Also
performs validation on selections/settings providing error messages if
necessary, explaining (in plain language) what the issue is. Currently
the auto partitioning of naked disks only supports GPT and MBR (VTOC8
pending for sparc64), so is only available for i386/amd64 install.
Submitted by: Allan Jude <freebsd@allanjude.com>, myself
Reviewed by: Allan Jude <freebsd@allanjude.com>
Approved by: re (glebius)
newly installed system. This should greatly increase the amount of
entropy available when SSH host keys are generated during first boot.
Reviewed by: markm, nathanw
Approved by: re (gjb)
directory on the FTP mirrors to fetch distributions, since
these are always pushed to releases/ during the release cycle.
MFC after: 3 days
X-MFC-To: stable/9, releng/9.2
This is a workaround, as for unknown yet reason the keys binded on the Partition Edition window are the one from partlist instead of the one from standard "formfield"
Reported by: alfred, nwhitehorn
media has one already, copy it in lieu of leaving things blank. This
reduces the foot-shooting potential for PXE installs that immediately
add packages.
type. GEOM provider names can't duplicate (or shouldn't -- devfs will either
break or only use the first one if they do) so using the first provider
by that name is a sufficient check. This also lets the scripted partitioner
install onto gmirror and geli and such things.
Scripts take the form:
------------------------------------
PARTITIONS=ada0
DISTRIBUTIONS="kernel.txz base.txz ports.txz"
#!/bin/sh
echo "sshd_enable=YES" >> /etc/rc.conf
pkg add puppet
echo "System setup complete"
------------------------------------
The second part of the script (beginning with #!) is run in the newly
installed system after the installation onto ada0 (with default partitioning,
see scriptedpart for more complicated scenarios) is complete.
will come soon. This lets the install process have a line like:
bsdinstall scriptedpart 'ada0 GPT {1.5G freebsd-ufs /, 10G freebsd-swap,
auto freebsd-ufs /usr}'
to set up a system with a 1.5GB /, some swap space, and a /usr using the
rest of ada0.
MFC after: 1 month
being run to set BSDINSTALL_DISTSITE accordingly. This change allows
non-RELEASE branches to use the FTP snapshots directory for bootonly.iso
installations.
Approved by: simon
containing whitespace. Also make other changes to support multi-word
arguments.
PR: bin/170759
Submitted by: dteske
Reviewed by: emaste (mentor)
Approved by: emaste (mentor)
MFC after: 3 days
any installer-provided configuration files have been copied. This allows
users to edit their fstab, if desired, and to see what the installer has
placed in rc.conf.
Requested by: phk
MFC after: 1 day
giving them a very brief description of the trade-offs. Whether the
user opts in or out add an entry to what will become /etc/rc.conf
explaining what dumpdev is and how to turn on/off crash dumps. The folks
who handle interacting with users submitting PRs have asked for this.
Reviewed by: nwhitehorn
MFC after: 1 day
the text of the menu selections doesn't get displayed properly and it
makes the installer appear to lock up for no obvious reason.
Reviewed by: nwhitehorn
creating new ones by destroying any geom that may have come into
existence immediately after adding a partition. The EBR partition scheme
is particularly enthusiastic about false positives in this case.
MFC after: 3 days
container partitions, which didn't do anything anyway, and check for
an existing freebsd-boot partition before bothering the user to make one.
PR: bin/160931
MFC after: 3 days
order to make every operation of the partition editor fully revertable.
Under *no circumstances* will it any longer touch the disks until the user
presses Finish and confirms it.
MFC after: 3 days
not configure the host's networking if netbooted [1]. Also fix FTP
installations behind some firewalls [2].
PR: bin/159583 [2]
Reported by: stas [1]
Approved by: re (kib)
wpa_supplicant.conf(5). Up to now, the PSK was truncated
to 15 characters (the length of the input field).
PR: 159559
Submitted by: Gavin Chappell <gavin.chappell@gmail.com>
Approved by: re (kib)
1) if no default gateway is given the route command will fail
and the script will abort with an error leading to an endless
loop unless configuration is cancelled or changed. [1]
2) In the IPv6 case add -inet6 to not alter the legacy IP default
route.
Reported by: Oleg Ginzburg (olevole olevole.ru) [1]
Tested by: Oleg Ginzburg (olevole olevole.ru) [1]
Approved by: re (kib)
This follows what the output of make targets looks like, and reduces the
number of directories needed on the FTP server, since we now have only one
architecture with multiple machine types (i386, which has i386 and pc98),
but 3 machines with 9 architectures between them (powerpc, mips, and arm).
Requested by: kensmith, bz
Approved by: re(kensmith)
you were stuck in an endless loop.
Reported by: kensmith
Approved by: re (kib) for BETA1
Pointy hat to: bz - wonder why I had not tested legacy IP thoroughly..
the normal distfile mechanism. Thanks to Marc Fonvieille for the patch and
for putting up with me taking entirely too long to commit this!
Submitted by: blackend
1) do not print out an empty "search ", things do not like it.
2) the search list is not comma separated.
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
to the final name if netconfig was completely finished. This fixes
reentrance problems even better than r222611.
Suggested by: nwhitehorn
Reviewed by: nwhitehorn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
interface. Otherwise an accidental start of the netowrk configuration
and immediate cancel after the install has finished removes the previously
configured settings.
Discussed with: nwhitehorn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
- netconfig - what auto will call which in turn will check for
IPv4 and IPv6 to be available and ask the user to configure it
by calling
- netconfig_ipv4 doing DHCP and static IPv4 addresses, and
- netconfig_ipv6 doing rtsol and static IPv6 addresses,
and then checking, querying and updating resolv.conf upon return.
Both DHCP and rtsol (in the future) might update resolv.conf already so
we seed ourselves from that file if available.
Reviewed by: nwhitehorn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
Some files keep the SUN4V tags as a code reference, for the future,
if any rewamped sun4v support wants to be added again.
Reviewed by: marius
Tested by: sbruno
Approved by: re
does. The rc.local wrapper script will also soon grow an option to use the
live environment after installation, so an immediate reboot isn't even
necessarily implied.
(e.g. powerpc64), this looks in a slightly different default path than now,
specifying both $MACHINE and $MACHINE_ARCH:
MIRROR/pub/FreeBSD/releases/`uname -p`/`uname -m`/`uname -r`
How to handle TBEMD properly probably merits some more discussion, but,
since no such 9.0-CURRENT distfiles exist at the moment, all existing
mirrors presently fail anyway.
in the archive instead of spinning through it to get a file count for the
progress bar. This speeds up installation a lot on systems with slow
CD drives.
pc-sysinstall) a replacement for sysinstall in the 9.0 release and beyond.
Currently supported platforms are sparc64, pc98, i386, amd64, powerpc, and
powerpc64. Integration into the build system will occur in the coming
weeks.
Merging with pc-sysinstall will use this code as a frontend, while
temporarily retaining the interactive partition editor here. This work
will be done in parallel with improvements on this code and release
integration.
Thanks to all who have provided testing and comments!