jail(8) would try to use strcpy to remove the interface from the start of
an IP address. This is undefined, and on arm64 will result in unexpected
IPv6 addresses.
Fix this by using memmove top move the string.
PR: 245102
Reported by: sbruno
MFC after: 2 weeks
Sponsored by: Innovate UK
According to the SMBIOS specification (revision 2.7 or newer), the
extended module size field should only be used for sizes that can't
fit in the older size field.
Reviewed by: rgrimes, grehan, jhb
Differential Revision: https://reviews.freebsd.org/D24107
As a followup to the use of login.conf environment vars (other than PATH) in
cron, this patch adds PATH (and HOME) to the list of login.conf settings
respected.
The new logic is as follows:
1. SHELL is always _PATH_BSHELL unless explicitly overridden in the crontab
file itself; no other settings are respected. This is unchanged.
2. PATH is taken from the first of: crontab file, login.conf, _PATH_DEFPATH
3. HOME is taken from the first of: crontab file, login.conf, passwd entry,
unset
4. The current directory for invoking the command is taken from the crontab
file's value of HOME (existing behavior), or the passwd entry, but not
anywhere else (so it might not equal HOME if that was set in login.conf).
Submitted by: Andrew Gierth <andrew_tao173.riddles.org.uk>
Reviewed by: sigsys_gmail.com
Differential Revision: https://reviews.freebsd.org/D23597
Move this handful of definitions into main.c, properly declare these as
extern in config.h. This fixes the config(8) build with -fno-common.
Unexplained in my previous commit to gas, -fno-common will become the
default in GCC10 and LLVM11, so it's worth addressing these in advance.
MFC after: 3 days
The SQHD field of a Completion Queue entry indicates the current
Submission Queue head pointer value. The head pointer represents the
next entry to be consumed and is updated after consuming the current
entry.
In the Admin queue processing, the current code updates the head pointer
after reporting the value to the host via the SQHD. This gives the
impression that the Controller is perpetually one command behind in its
processing of the Admin SQ. And while this doesn't appear to bother some
initiators, it is wrong.
Fix is to update the SQ head pointer prior to writing the SQHD value in
the completion.
While here, fix missed update of dword 0 (cdw0) in the completion
message.
Reported by: khng300
Reviewed by: jhb, imp
Approved by: jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24083
The bhyve NVMe emulation has a race in the logic which generates command
completion interrupts. On FreeBSD guests, this manifests as kernel log
messages similar to:
nvme0: Missing interrupt
The NVMe emulation code sets a per-submission queue "busy" flag while
processing the submission queue, and only generates an interrupt when
the submission queue is not busy.
Aside from being counter to the NVMe design (i.e. interrupt properties
are tied to the completion queue) and adding complexity (e.g. exceptions
to not generating an interrupt when "busy"), it causes a race condition
under the following conditions:
- guest OS has no outstanding interrupts
- guest OS submits a single NVMe IO command
- bhyve emulation processes the SQ and sets the "busy" flag
- bhyve emulation submits the asynchronous IO to the backing storage
- IO request to the backing storage completes before the SQ processing
loop exits and doesn't generate an interrupt because the SQ is "busy"
- bhyve emulation finishes processing the SQ and clears the "busy" flag
Fix is to remove the "busy" flag and generate an interrupt when the CQ
head and tail pointers do not match.
Reported by: khng300
Reviewed by: jhb, imp
Approved by: jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D24082
This adds support for the Dataset Management (DSM) command to the NVMe
emulation in general, and more specifically, for the deallocate
attribute (a.k.a. trim in the ATA protocol). If the backing storage for
the namespace supports delete (i.e. deallocate), setting the deallocate
attribute in a DSM will trim/delete the requested LBA ranges in the
underlying storage.
Reviewed by: jhb, araujo, imp
Approved by: jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21839
Pass the struct pci_nvme_blockstore pointer for this namespace to the
namespace initialization function instead of only the desired eui64
value.
Minor functional change in that the code updates the eui64 value in the
blockstore.
Reviewed by: jhb, araujo
Approved by: jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21838
Add a "copy direction" parameter to nvme_prp_memcpy such that data can
be copied to the memory specified by the PRP entries (current behavior)
or copied from the PRP entries (new behavior). The upcoming deallocate
functionality will use the copy from capability.
Reviewed by: jhb, araujo
Approved by: jhb (maintainer)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21837
Property-based filters allow substring and regular expressions
(see re_format(7)) matching against various message attributes.
Filter specification starts with '#:' or ':' followed by three
comma-separated fields property, operator, "value". Value must be
double-quoted. A double quote and backslash must be escaped by a
blackslash.
Following properties are supported as test value:
o msg - body of the message received;
o programname - program name sent the message;
o hostname - hostname of message's originator;
o source - an alias for hostname.
Supported operators:
o contains - true if filter value is found as a substring of property;
o isequal - true if filter value is equal to property;
o startswith - true if property starts with filter value;
o regex - true if property matches basic regular expression defined
in filter value;
o ereregex - true if property matches extended regular expression
defined in filter value;
Operator may be prefixed by '!' to invert compare logic or by
'icase_' to make comparison function case insensitive.
Submitted by: Boris N. Lytochkin <lytboris at gmail com>
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D23468
We need a valid st_dev, st_ino and st_mtime
to correctly track which files have been verified
and to update our notion of time.
ve_utc_set(): ignore utc if it would jump our current time
by more than VE_UTC_MAX_JUMP (20 years).
Allow testing of install command via userboot.
Need to fix its stat implementation too.
bhyveload also needs stat fixed - due to change to userboot.h
Call ve_error_get() from vectx_close() when hash is wrong.
Track the names of files we have hashed into pcr
For the purposes of measured boot, it is important
to be able to reproduce the hash reflected in
loader.ve.pcr
so loader.ve.hashed provides a list of names in the order they
were added.
Reviewed by: imp
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org//D24027
While here do a bit of cleanup:
- declare local variables as such,
- make tmpdir_create() clean up logfile directories, to handle a
previously interrupt test run more gracefully.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This happens when compressing a previously uncompressed already-rotated
file, as happens when handling the 'p' flag in newsyslog.conf. The file
name is stored in a flexible array member, so these structures cannot be
stack allocated.
Also make sure that we call change_attrs() and do_zipwork() in dry-run
mode; they handle this properly, contrary to the commit log message for
r327451.
CID: 1008168
Github PR: https://github.com/freebsd/freebsd/pull/427
MFC after: 2 weeks
Submitted by: Radek Brich (original version)
When deleting a user, if its home directory does not belong to it, it should
not be removed. This is the promise that the manpage makes, the tool should
ensure that it respects that promise.
Add a regression test about it
PR: 244967
Submitted by: Eric Hanneken <eric@erichanneken.com>
MFC after: 3 days
headers. Device documentation often times give offsets relative to the
start of the entire VSEC, not just the post-header data area, so this
change makes it easier to correlate offsets.
Modules from ports/pkg are commonly installed to /boot/modules rather than to
the same directory the kernel resides in. Look there if a module is not found
next to the kernel.
Submitted by: mmacy
Reported by: Nick Principe <nap@iXsystems.com>
Approved by: mmacy (mentor)
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
autofs was introduced with FreeBSD 10.1 and is the supported method for
automounting filesystems. As of r296194 the amd man page claimed that it
is deprecated. Remove it from base now; the sysutils/am-utils port is
still available if necessary.
Discussed with: cy
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
- Sort options.
- Do not use macros (like .Ar) to specify width for Bl (macros within that
string are not expanded).
- Use Cm instead of Ar for mode names.
- Fix some typos reported by mandoc.
- Move the documentation of the PID file from the -P flag description to
the FILES section.
Approved by: bcr (mentor)
Differential Revision: https://reviews.freebsd.org/D23941
It does extremely useful things like execute sendmail and spew dubiously
accurate factoids.
From the feedback, it seems like it is an essential utility in a modern unix
and not at all a useless bikeshed. How do those Linux people live without it?
Reverts r358561.
With powerd_flags="-N", this makes powerd(8) exclude "nice" time when
computing the CPU utilization. This makes it possible to prevent
CPU-intensive "background" processes from spinning up the CPU.
Note that only *userland* CPU usage belonging to "nice" processes is
excluded; we do not track whether time spent in the kernel is on behalf
of nice or non-nice processes, so kernel-intensive nice processes can
still result in the CPU being sped up.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23868
This is the result of splitting r358153 in two, in order to avoid a build
system bug and being able to merge the change to previous releases..
Document better this file, updating the URL to the IANA registry and closely
match the official services.
For system ports (0 to 1023) we now try to follow the registry closely, noting
some historical differences where applicable.
As a side effect: drop references to unofficial Kerberos IV which was EOL'ed
on Oct 2006[1]. While it is conceivable some people may still use it in some
very old FreeBSD machines that can't be replaced easily, the use of it is
considered a security risk. Also drop the unofficial netatalk, which we
supported long ago in the kernel but was dropped long ago.
Leave for now smtps, even though it conflicts with IANA's submissions.
The change should have very little visibility, if any, but should be a
step closer to the current IANA database.
[1] https://web.mit.edu/kerberos/krb4-end-of-life.html
MFC after: 2 weeks
read() can return a short read, whereas stream_read() waits until the
full version string is read.
Submitted by: Ka Ho Ng <khng300_gmail.com>
Reviewed by: grehan
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23591
Give up the battle to keep extra files in $MACHINE/compile to keep the file in
the tree. Instead, create CDIR (usually ../compile) if it doesn't exist when
we're using a default build location (eg, not using -d). If it does, we do
nothing. This only affects people that do old-school builds, but it's bit me a
dozen times since last summer so time to fix the bug.
This change reflects the ability to change machine_arch in a config file. This
is useful for including one config in another and changing the machine_arch
in the second one.
Currently, you can have multiple machine directives if they are otherwise
identical. Relax this so that only the machinename part is the same. This allows
one to change the machine arch in a different config file you've included easily.
Currently, the size of the swap device is unconditionally reported using
blocks, even if -h has been used.
- While here, switch to CONVERT_BLOCKS() instead of CONVERT() which will
avoid overflowing size counters (in human readable form see: r196244)
- Update the column headers to reflect that a size is being reported instead
of the block size units being used
Before:
$ swapinfo
Device 1K-blocks Used Avail Capacity
/dev/gpt/swapfs 1048576 0 1048576 0%
$
After:
$ swapinfo -h
Device Size Used Avail Capacity
/dev/gpt/swapfs 1.0G 0B 1.0G 0%
$
Differential Revision: https://reviews.freebsd.org/D23758
Reviewed by: kevans
MFC after: 3 weeks
This patch adds a new netbe_peek_recvlen() function to the net
backend API. The new function allows the virtio-net receive code
to know in advance how many virtio descriptors chains will be
needed to receive the next packet. As a result, the implementation
of the virtio-net mergeable rx buffers feature becomes efficient,
so that we can enable it also with the tap(4) backend. For the
tap(4) backend, a bounce buffer is introduced to implement the
peeck_recvlen() callback, which implies an additional packet copy
on the receive datapath. In the future, it should be possible to
remove the bounce buffer (and so the additional copy), by
obtaining the length of the next packet from kevent data.
Reviewed by: grehan, aleksandr.fedorov@itglobal.com
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23472
Document better this file, updating the URL to the IANA registry and closely
match the official services.
For system ports (0 to 1023) we now try to follow the registry closely, noting
some historical differences where applicable.
For the User ports (1024 - 49151) we try to keep some sensible balance only
of services that are likely to be found on FreeBSD/UNIX systems. This attempts
to strike a balance between complexity and usefulness.
As a side effect: drop references to unofficial Kerberos IV which was EOL'ed
on Oct 2006[1]. While it is conceivable some people may still use it in some
very old FreeBSD machines that can't be replaced easily, the use of it is
considered a security risk. Also drop the unofficial netatalk, which we
supported long ago in the kernel but was dropped long ago.
[1] https://web.mit.edu/kerberos/krb4-end-of-life.html
MFC after: 3 weeks (likely to 12-stable only)
Differential Revision: https://reviews.freebsd.org/D23621
environ(7) was in AT&T Version 7
ac(8): Add a HISTORY section
sa(8): Add a HISTORY section
sqrt(3): Add the actual sqrt function to the HISTORY section
Obtained from: OpenBSD
Submitted by: gbergling@gmail.com
Approved by: bcr@(mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23693
ACPI Control Method Batteries have a _BIF and/or _BIX object which
provide static properties of the battery. FreeBSD acpi_cmbat module
supported _BIF object only, which was deprecated as of ACPI 4.0.
_BIX is an extended version of _BIF defined in ACPI 4.0 or later.
As of writing, _BIX has two revisions. One is in ACPI 4.0 (rev.0) and
another is in ACPI 6.0 (rev.1). It seems that hardware vendors still
stick to _BIF only or _BIX rev.0 + _BIF for the maximum compatibility.
Microsoft requires _BIX rev.0 for Windows machines, so there are some
laptop machines with _BIX rev.0 only. In this case, FreeBSD does not
recognize the battery information.
After this change, the acpi_cmbat module gets battery information from
_BIX or _BIF object and internally uses _BIX rev.1 data structure as
the primary information store in the kernel. ACPIIO_BATT_GET_BI[FX]
returns an acpi_bi[fx] structure built by using information obtained
from a _BIF or a _BIX object found on the system. The revision number
field can be used to check which field is available. The acpiconf(8)
utility will show additional information if _BIX is available.
Although ABIs of ACPIIO_BATT_* were changed, the existing APIs for
userland utilities are not changed and the backward-compatible ABIs
are provided. This means that older versions of acpiconf(8) can also
work with the new kernel. The (union acpi_battery_ioctl_arg) was
padded to 256 byte long to avoid another ABI change in the future.
A _BIX object with its revision number >1 will be treated as
compatible with the rev.1 _BIX format.
Reviewed by: takawata
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23728
"Oops" - ln(1) is fine and dandy, but when you're using DESTDIR...it's not-
the path will almost certainly be invalid once the root you've just
installed to is relocated, perhaps to /.
Switch to install(1) using `-l rs` to calculate the relative symlink between
the two, which should work just fine in all cases.
MFC after: 1 week
Some ids are redundand because the list_ecaps() function decodes them
by explicit switch case. But listing them all makes it easier to not
miss ecaps, while not changing the functionality.
Initial submission by: Dmitry Luhtionov <dmitryluhtionov@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
services: Add PROFInet and EtherCAT.
Both are admitedly very niche features and no known users exist currently.
I am doing a further review/update of the services file (see D23621) and
both of these are not likely to be considered.
This patch cleans up the API between the net frontends (e1000,
virtio-net) and the net backends (tap and netmap).
We move the virtio-net header stripping/prepending to the
virtio-net code, where this functionality belongs.
In this way, the netbe_send() and netbe_recv() signatures
can have const struct iov * rather than struct iov *.
Reviewed by: grehan, bcr, aleksandr.fedorov@itglobal.com
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D23342
For historical reasons the "remote magtape protocol module" rmt gets
invoked as /etc/rmt, which is a symlink to /usr/sbin/rmt. Put it in the
utilities package, as /usr/sbin/rmt is.
Sponsored by: The FreeBSD Foundation
The previous expression borked if a username had a plus or hyphen in it.
This is needlessly restrictive- at leSt a hyphen in the middle is valid.
Instead of playing this game, let's just assume the username can't contain a
colon and mask out the second field.
Submitted by: sigsys gmail com
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D23548
This command was only ever for sparc64, so remove it. Remove
usr.sbin/Makeiile.sparc64 as well since it only references ofwdump
(cross platform) and eeprom.
Reivewed by: cy@, bcr@
Differential Revision: https://reviews.freebsd.org/D23593
Now we default to setting the hardware clock to UTC
everywhere. sparc64 was the old odd-man out before.
Reivewed by: cy@, bcr@
Differential Revision: https://reviews.freebsd.org/D23593
vfork() is error-prone, and the usage here definitely grew to not be
clearly OK given vfork-semantics; e.g. setusercontext(3) within the child.
Rip out vfork() and the rest of the references to it. fork is heavier, but
it's unclear that the difference will be all that obvious.
Reported by: Andrew Gierth and sigsys@gmail.com
in the sysctl block for the driver. mpsutil/mprutil needs this so it can
know how big of a buffer to allocate when requesting the IOCFacts from the
controller. This eliminates the kernel console messages about wrong
allocation sizes.
Reported by: imp
- Mention bootconfig target in TARGETS section.
- Document PARTITIONS variable, which is only mentioned in the examples,
but doesn't have its own point.
Submitted by: arrowd@
Reviewed by: bcr
Approved by: bcr (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22927
The set_empty_value test has a cleanup function, but is not called.
Fix it
Reviewed by: 0mp
Approved by: kp
Differential Revision: https://reviews.freebsd.org/D23498
Prior to processing environment variable set in the crontab file as those
should be of higher precedent, pull in the user or login class environment.
This is another supporting feature for allowing one to configure system-wide
settings that may affect both regular cron jobs as well as services.
This is the final part of D21481.
Submitted by: Andrew Gierth <andrew_tao173.riddles.org.uk>
As mentioned in r357562, this gives the user a single place to configure
environment variables that need to be used for various services -- the
"daemon" class -- for, e.g., configuring a system-wide HTTP proxy.
This is a part of D21481.
Submitted by: Andrew Gierth <andrew_tao173.riddles.org.uk>
simple_httpd was granted a reprieve from the picobsd removal based on having
some reported user; it turns out this user isn't actually using the version
in base and merging their changes would be difficult at this point, so the
version in base will simply continue to rot. Retire it now, it may make a
comeback to ports with the improved version.
No notice issued because its current visibility has only been for ~3
months, and a notice has been previously issued about picobsd removal.
Fix the following -Werror warning from clang 10.0.0 in bsnmpd:
usr.sbin/bsnmpd/modules/snmp_pf/pf_snmp.c:1661:4: error: misleading indentation; statement is not part of the previous 'else' [-Werror,-Wmisleading-indentation]
return (-1);
^
usr.sbin/bsnmpd/modules/snmp_pf/pf_snmp.c:1658:5: note: previous statement is here
} else
^
The intent was to group the return statement with the previous syslog()
call.
MFC after: 3 days
Fix the following -Werror warning from clang 10.0.0 in bsnmpd:
usr.sbin/bsnmpd/modules/snmp_bridge/bridge_port.c:1235:43: error: overlapping comparisons always evaluate to true [-Werror,-Wtautological-overlap-compare]
begemotBridgeStpPortEnable_enabled ||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~
Work around it by casting the enum values to the type of val->v.integer.
MFC after: 3 days
In this path, we used va_start() without pairing it with va_end(). Add the
va_end(). (va_start() without paired va_end() is undefined behavior per the C
standard.)
"In many implementations, [va_end] is a do-nothing operation; but those
implementations that need it probably need it badly." - Rationale for the ANSI
C Programming Language, § 4.8.1.3.
Reported by: Coverity
CID: 1340539
Includes commentary of when ZFS works well by default (>= 8GB RAM),
and where to go for information on ZFS tuning if required.
Also hoist the options text to the top of script as variables
(will help with future international translations).
Reviewed by: philip, dteske, karels, imp, emaste
Approved by: rgrimes
Differential Revision: https://reviews.freebsd.org/D23224
In order to do so we need to install the msdosfs headers to the bootstrap
sysroot and avoid includes of kernel headers that may not exist on every
host (e.g. sys/lockmgr.h). This change should allow bootstrapping of makefs
on FreeBSD 11+ as well as Linux and macOS.
We also have to avoid using the IO_SYNC macro since that may not be
available. In makefs it is only used to switch between calling
bwrite() and bdwrite() which both call the same function. Therefore we
can simply always call bwrite().
For our CheriBSD builds we always bootstrap makefs by setting
LOCAL_XTOOL_DIRS='lib/libnetbsd usr.sbin/makefs' and use the makefs binary
from the build tree to create a bootable disk image.
Reviewed By: brooks
Differential Revision: https://reviews.freebsd.org/D23201
Most of ntpd still handles MK_OPENSSL ok, but the libevent import brought
in the SSL bufferevent routines without checking MK_OPENSSL.
This doesn't completely fix WITHOUT_CRYPTO=YES building, but hey, it's one
less broken thing.
The build failure was discoved by Michael Dexter's recent Build Options
Survey run, at https://callfortesting.org/results/bos-2020-01-16/\
WITHOUT_WPA_SUPPLICANT_EAPOL-small.txt.
Reported by: Michael Dexter <editor@callfortesting.org> via emaste
MFC after: 2 weeks
This resulted in the partitioning step failing if either of the
"Auto (UFS)" or "Manual" options were selected.
Reason: partedit was attempting to open a directory (TMPDIR) read/write,
which resulted in errno(2) 21 - EISDIR - Is a directory.
Reported by: Clay Daniels <clay.daniels.jr@gmail.com>
Reviewed by: Ryan Moeller <ryan@freqlabs.com>
Approved by: emaste, bcran
Differential Revision: https://reviews.freebsd.org/D23232
When _a is empty we end up with an invalid invocation of pfctl, and no output.
We must add quotes to make it clear to pfctl that we're passing an empty anchor
name.
PR: 224415
Submitted by: sigsys AT gmail.com
MFC after: 2 weeks
Extended attribute values can potentially be quite large. One test for ZFS
is supposed to set a 200MB xattr. However, the buffer size for reading
values from stdin with setextattr -i is so small that the test times out
waiting for tiny chunks of data to be buffered and appended to an sbuf.
Increasing the buffer size should help alleviate some of the burden of
reallocating larger sbufs when writing large extended attributes.
Submitted by: Ryan Moeller <ryan@freqlabs.com>
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D23211
Use strlcpy to guarantee NUL termination. Due to this, there is
no need for strncmp; simply use strcmp.
Reported by: Coverity
CID: 1412242
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D23159
config.h as a guide. In practice contributed software maintains a copy
of config.h within its build directory tree containing its Makefile.
usr.sbin/unbound is the home for its config.h.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22983
GCC9 points out that devs may be used initialized after the bailout label;
in-fact, if num_io_opts != 2 then it is. Move the initialization up a little
bit.
Reviewed by: ken
MFC after: 3 days
If inetd is compiled without inet6 support, we need to error out on
rpc+inet6 services rather than attempting to call into rpc bits with an
uninitialized netid.
v4bind is only used with INET6 support, so move it under the proper #ifdefs
with v6bind.
Reported by: Pavel Timofeev <timp87 gmail com>
MFC after: 3 days
Add printf() wrapper to use CR/CRLF terminators depending on whether
stdio is mapped to a tty open in raw mode.
Try to use the wrapper everywhere.
For now we leave the custom DPRINTF/WPRINTF defined by device
models, but we may remove them in the future.
Reviewed by: grehan, jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D22657
After increasing WARNS, building WITHOUT_TCP_WRAPPERS failed because of
some unused variables.
Reported by: Cirrus-CI (against my WIP branch)
MFC with: r356248
Sponsored by: The FreeBSD Foundation
command line option. Thanks to the removal of unnecessary information and
the organization into columns, this helps the output be more legible on
both 80 column displays and non-80 column displays. imp@ provided the
idea on this.
Highlights:
- Use MAX() for maxsock raising; small readability improvement IMO
- malloc(3) + memset(3) -> calloc(3) where appropriate
- stop casting the return value of malloc(3)
- mallloc(3) -> reallocarray(3) where appropriate
A future change may enter capability mode when forking for some of the
built-in handlers.
This change is purely in the name of noise reduction from static analyzers
that want to complain that bzero(3) is obsolete in favor of memset(3).
With this, clang-analyze at least is now noise free. WARNS= 6 also appears
to have been OK for some time now, so drop the current setting and opt for
the default.
Currently, child pids are only tracked if maxchildren is specified. As a
consequence, without a maxchild limit we do not get a notice in syslog on
children aborting abnormally. This turns out to be a great debugging aide at
times.
Children are now tracked in a LIST; the management interface is decidedly
less painful when there's no upper bound on the number of entries we may
have at the cost of one small allocation per connection.
PR: 70335
The main point here is capturing the maxchild > 0 check. A future change to
inetd will start tracking all of the child pids so that it can give proper
and consistent notification of process exit/signalling.
chargen_dg: clang-analyze is convinced that endring could be non-NULL at
entry, and thus wants to assume that rs == NULL. Just independently
initialize rs if it's NULL to appease the analyzer.
getconfigent: policy leaks on return
free_connlist: reorganize the loop to make it clear that we're not going to
access `conn` after it's been freed.
cpmip/hashval: left-shifts performed will result in UB as we take
signed 0xABC3D20F and left shift it by 5.
sep->se_policy gets a strdup'd version of policy, so we don't need it to
stick around afterwards.
While here, remove a couple of NULL checks prior to free(policy).
CID: 1006865
MFC after: 3 days
While the mailer is normally opened/set if the mailto is set, this is not
the case if the grandchild actually didn't produce any output. This change
corrects the situation to only attempt to kill/close the mail process if it
was actually opened in the first place.
The reporter initially stumbled on the -n (suppress mail on success) flag
leading to a SIGKILL of the process group, but simultaneously
discovered/reported the behavior with !-n jobs if MAILTO was set and no
output happened.
All of these places that are checking mailto should actually be checking
whether mail is set, so do that for consistency+correctness.
This set of bugs were introduced by r352668.
Submitted by: sigsys@gmail.com
Reported by: sigsys@gmail.com
This is based on DragonFly's implementation from about 2019-09-13. It
only contains the basic code and header information to identify the
disks.
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D13369
exfat is fundamentally the same design as fat32. The superblock differs
marginally, and there are some additional optional features irrelevant to
fstype(8); the structure of dirents has changed slightly to enable, among
other things, larger files; the directory entries are no longer DOS 8.3
ASCII or local 8-bit encoding, but instead explicitly UCS-2-LE.
(As a result, this change uses iconv to convert a found exfat volume label
to the user's locale.)
Locating the volume label is identical to FAT32: locate the root directory
and walk through dirents until you find a volume label. Like FAT32, follow
the FAT chain between root directory clusters as necessary.
PR: 242225
Reported by: Victor Sudakov <vas AT sibptus.ru>
Update all the references to NFSv4.1, so that they apply to NFSv4.1 and
NFSv4.2. Also, change the MDS->DS mounts to use NFSv4.2, so that both
versions of the protocol can be used against the server with pNFS enabled.
This is a content change.
Include references to NFSv4.2 and Flexible File layout, plus clarify
when vfs.nfsd.flexlinuxhack needs to be set for Linux pNFS clients.
Also update the man page to reflect the addition of SpaceUsed to the
attributes stored in the extended attribute on the MDS (r354158).
This is a content change.
Include references to NFSv4.2 and associated RFCs.
Also clarify when a Linux client needs to set vfs.nfsd.flexlinuxhack if
a pNFS server is in use.
This is a content change.
Parse out the VSEC. If the user invokes a second -c command line option,
do a hex dump of the vendor data.
Reviewed by: imp
MFC after: 3 days
Sponsored by: Intel
Differential Revision: http://reviews.freebsd.org/D22808
- Allow the userland hypervisor to intercept breakpoint exceptions
(BP#) in the guest. A new capability (VM_CAP_BPT_EXIT) is used to
enable this feature. These exceptions are reported to userland via
a new VM_EXITCODE_BPT that includes the length of the original
breakpoint instruction. If userland wishes to pass the exception
through to the guest, it must be explicitly re-injected via
vm_inject_exception().
- Export VMCS_ENTRY_INST_LENGTH as a VM_REG_GUEST_ENTRY_INST_LENGTH
pseudo-register. Injecting a BP# on Intel requires setting this to
the length of the breakpoint instruction. AMD SVM currently ignores
writes to this register (but reports success) and fails to read it.
- Rework the per-vCPU state tracked by the debug server. Rather than
a single 'stepping_vcpu' global, add a structure for each vCPU that
tracks state about that vCPU ('stepping', 'stepped', and
'hit_swbreak'). A global 'stopped_vcpu' tracks which vCPU is
currently reporting an event. Event handlers for MTRAP and
breakpoint exits loop until the associated event is reported to the
debugger.
Breakpoint events are discarded if the breakpoint is not present
when a vCPU resumes in the breakpoint handler to retry submitting
the breakpoint event.
- Maintain a linked-list of active breakpoints in response to the GDB
'Z0' and 'z0' packets.
Reviewed by: markj (earlier version)
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D20309
The !USE_OPENSSL_CRYPTO_RAND path uses arc4random_buf() correctly.
In general, we should prefer to avoid things OpenSSL does poorly when a good
alternative exists in libc.
This doesn't appear to have some active upstream (and it's a steaming pile of
bad 90s crypto design). Rip out the completely horrible bits and leave the
only mildly less horrible bits. The whole thing should probably be deleted; to
the extent it purports to provide a security feature: it doesn't.
<sys.mk> defines ECHO=echo when not using make -s, and ECHO=true when using
make -s.
export ECHO for ntp products and use it in the mkver script to echo the
version. This suppresses the output as appropriate. ECHO is given a default
value to make sure things still work as expected for anyone that isn't
redefining ECHO.
Reviewed by: cy
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22101
VFs return zero for the memory enable bit even if it has been set by a
prior write. After r348779 this caused the annoying behavior that a
guest OS would unintentionally disable memory decoding on a future
read-modify-write operation on the command register. Instead, return
the shadow value of the command register for reads. This ensures that
the guest will only toggle the state of the memory enable bit when it
specifically intends to do so.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Update a bunch of Makefile.depend files as
a result of adding Makefile.depend.options files
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22494
Leaf directories that have dependencies impacted
by options need a Makefile.depend.options file
to avoid churn in Makefile.depend
DIRDEPS for cases such as OPENSSL, TCP_WRAPPERS etc
can be set in local.dirdeps-options.mk
which can add to those set in Makefile.depend.options
See share/mk/dirdeps-options.mk
Reviewed by: bdrewery
MFC after: 1 week
Sponsored by: Juniper Networks
Differential Revision: https://reviews.freebsd.org/D22469
Previously kbdmap had a localized menu heading ("Choose your keyboard
layout") but not the dialog title ("Keyboard Menu").
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
Some of the printf statements only use LF to get a newline. However, a CR character is also required for the serial console to print debug logs in a nice way.
Fix those code locations that only use LF, by adding a CR character.
Reviewed by: markj, aleksandr.fedorov@itglobal.com
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22552
When using sysrc to modify a file, the file should be created silently.
However, with the introduction of SVN r335280, an error of "No such file
or directory" would appear despite everything else working as-expected.
The nature of this spurious error is that SVN r335280 did not check if
the file exists first, before trying to fixup the line-endings in the
file just prior to modification.
PR: bin/240875
Reported by: Jose Luis Duran
MFC after: 3 days
foreground.
This allows a separate process to monitor when and how those programs exit.
That process can then restart them if needed.
Submitted by: Alex Burlyga
Reviewed by: bcr, imp
MFC after: 1 week
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D22474
This reapplies the RISC-V GNU ld workaround from r354896, r354899, and
354900, along with a fix for the build failure during cleandir.
LINKER_TYPE was not being set during cleandir, resulting in
Malformed conditional (${LINKER_TYPE} == "bfd" && ${MACHINE} == "riscv")
from Cirrus-CI.
PR: 242109
Sponsored by: The FreeBSD Foundation
Add code to decode the BootCurrent and BootXXXX variable it points at
to deduce the ESP used to boot the system. By default, it prints the
path to that device. With --unix-path (-p) it will instead print the
current mount point for the ESP, if any (or an error). With
--device-path (-d) it wil print the UEFI device path for the ESP.
Note: This is the best guess based on the UEFI variables. If the ESP
is part of a gmirror, etc, that won't be reported. If by some weird
chance there was a complicated series of chain boots, this may not be
what you want. For setups that don't add layers on top of the raw
devices, it is accurate.
Differential Revision: https://reviews.freebsd.org/D22432
This patch fixes a race condition where the receive callback is called
while the device is being reset. Since the rx_merge variable may change
during reset, the receive callback may operate inconsistently with what
the guest expects.
Also, get rid of the unused rx_vhdrlen variable.
PR: 242023
Reported by: aleksandr.fedorov@itglobal.com
Reviewed by: markj, jhb
MFC with: r354552
Differential Revision: https://reviews.freebsd.org/D22440
error: operator '?:' has lower precedence than '|'; '|' will be evaluated first
I discovered this in CheriBSD after updating our fork of clang to the latest
upstream master.
Reviewed By: ian
Differential Revision: https://reviews.freebsd.org/D22433
Since st_birthtime doesn't exists on Linux (unless you use statx(2)), we
instead populate it with the st_ctime value.
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D22386
Instead of providing ioctl cmd value, which has no meaning to user,
print MSR number. The later is what the user expects in this place
even.
Reported by: pstef
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Instead of calloc()ing (and forgetting to free) in a tight loop, just put
this small array on the stack.
Reported by: Coverity
Coverity CID: 1331665
MFC after: 2 weeks
Sponsored by: Axcient
sesutil would allow the user to toggle an LED that was one past the maximum
element. If he tried, ENCIOC_GETELMSTAT would return EINVAL.
Reported by: Coverity
Coverity CID: 1398940
MFC after: 2 weeks
Sponsored by: Axcient
At the end of both mevent_add() and mevent_update(), mevent_notify()
is called to wakeup the I/O thread, that will call kevent(changelist)
to update the kernel.
A race condition is possible where the client calls mevent_add() and
mevent_update(EV_ENABLE) before the I/O thread has the chance to wake
up and call mevent_build()+kevent(changelist) in response to mevent_add().
The mevent_add() is therefore ignored by the I/O thread, and
kevent(fd, EV_ENABLE) is called before kevent(fd, EV_ADD), resuliting
in a failure of the kevent(fd, EV_ENABLE) call.
PR: 241808
Reviewed by: jhb, markj
MFC with: r354288
Differential Revision: https://reviews.freebsd.org/D22286
via 'diskinfo -v'. This avoids the need to track it down via CAM,
and should also work for disks that don't use CAM. And since it's
inherited thru the GEOM hierarchy, in most cases one doesn't need
to walk the GEOM graph either, eg you can use it on a partition
instead of disk itself.
Reviewed by: allanjude, imp
Sponsored by: Klara Inc
Differential Revision: https://reviews.freebsd.org/D22249
Mergeable rx buffers is a virtio-net feature that allows the hypervisor
to use multiple RX descriptor chains to receive a single receive packet.
Without this feature, a TSO-enabled guest is compelled to publish only
64K (or 32K) long chains, and each of these large buffers is consumed
to receive a single packet, even a very short one. This is a waste of
memory, as a RX queue has room for 256 chains, which means up to 16MB
of buffer memory for each (single-queue) vtnet device.
With the feature on, the guest can publish 2K long chains, and the
hypervisor will merge them as needed.
This change also enables the feature in the netmap backend, which
supports virtio-net offloads. We plan to add support for the
tap backend too.
Note that differently from QEMU/KVM, here we implement one-copy receive,
while QEMU uses two copies.
Reviewed by: jhb
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D21007
If a VM is flooded with more ingress packets than the guest OS
can handle, the current virtio-net code will keep reading those
packets and drop most of them as no space is available in the
receive queue. This is an undesirable receive livelock, which
is a waste of CPU and memory resources and potentially opens to
DoS attacks.
With this change, virtio-net uses the new netbe_rx_disable()
function to disable ingress operation in the backend while the
guest is short on RX buffers. Once the guest makes more buffers
available to the RX virtqueue, ingress operation is enabled again
by calling netbe_rx_enable().
Reviewed by: bryanv, jhb
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D20987
The valectl(4) program is used to manage vale(4) switches.
Add it to the system commands so that it can be used right away.
This program was previously called vale-ctl, and stored in
tools/tools/netmap
Reviewed by: hrs, bcr, lwhsu, kevans
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22146
whitespace, and also reorder the fields so they are easier to read on
an 80 column display (the lines wrapped even before these changes).
Also fix non-standard nomenclature in the Caps code, and update the
man page.
Reported by: rpokala
standard nomenclature of "device" and "vendor" with the "sub" variants.
This changes the printed format, so anything that scrapes and parses
this will need to be adapted. No compatibility shims are provided,
but this will not be MFC'd.
Reviewed by: jhb, emaste, gtetlow
Approved by: jhb, emaste, gtetlow
Pass the list of user selected disks from zfsboot to bootconfig so that
the latter doesn't rely on ESP autodetection that apparently fails for
some cases, e.g. memstick installation with nvme (boot) and sata drives.
While here, fix printing of debug messages in bootconfig.
Reviewed by: bcran, imp, tsoome
Differential Revision: https://reviews.freebsd.org/D21930
This warning (comparing a pointer against a zero character literal
rather than NULL) has existed since GCC 7.1.0, and was recently added to
Clang trunk.
Almost all of these are harmless, except for fwcontrol's str2node, which
needs to both guard against dereferencing a NULL pointer (though in
practice it appears none of the callers will ever pass one in), as well
as ensure it doesn't parse the empty string as node 0 due to strtol's
awkward interface.
Submitted by: James Clarke <jtrc27@jrtc27.com>
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D21914
'quarterly' package sets do not exist for head, so explicitly
install the 'latest' configuration file there. Otherwise,
fall back to the original conditional evaluation to determine
if the 'latest' or 'quarterly' configuration file should be
installed.
Reported by: manu
Reviewed by: manu
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
It seems reasonable to allow, for instance:
$ certctl list
# reviews output -- ah, yeah, I don't trust that one
$ certctl blacklist ce5e74ef.0
$ certctl rehash
We can unambiguously determine what cert "ce5e74ef.0" refers to, and we've
described it to them in `certctl list` output -- I see little sense in
forcing another level of filesystem inspection to determien what cert file
this physically corresponds to.
This change allows to specify a watchdog(9) timeout for a system
shutdown. The timeout is activated when the watchdogd daemon is
stopped. The idea is to a prevent any indefinite hang during late
stages of the shutdown. The feature is implemented in rc.d/watchdogd,
it builds upon watchdogd -x option.
Note that the shutdown timeout is not actiavted when the watchdogd
service is individually stopped by an operator. It is also not
activated for the 'shutdown' to the single-user mode. In those cases it
is assumed that the operator knows what they are doing and they have
means to recover the system should it hang.
Significant subchanges and implementation details:
- the argument to rc.shutdown, completely unused before, is assigned to
rc_shutdown variable that can be inspected by rc scripts
- init(8) passes "single" or "reboot" as the argument, this is not
changed
- the argument is not mandatory and if it is not set then rc_shutdown is
set to "unspecified"
- however, the default jail management scripts and jail configuration
examples have been updated to pass "jail" to rc.shutdown, just in case
- the new timeout can be set via watchdogd_shutdown_timeout rc option
- for consistency, the regular timeout can now be set via
watchdogd_timeout rc option
- watchdogd_shutdown_timeout and watchdogd_timeout override timeout
specifications in watchdogd_flags
- existing configurations, where the new rc options are not set, should
keep working as before
I am not particularly wed to any of the implementation specifics.
I am open to changing or removing any of them as long as the provided
functionality is the same (or very close) to the proposed one.
For example, I think it can be implemented without using watchdogd -x,
by means of watchdog(1) alone. In that case there would be a small
window between stopping watchdogd and running watchdog, but I think that
that is acceptable.
Reviewed by: bcr (man page changes)
MFC after: 5 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D21221
installer when installing the system on a ZFS root filesystem.
For arm64, zfs_load="YES" does not add opensolaris.ko as a kld
dependency, so add it explicitly to prevent boot-time failures
out-of-box.
PR: 240478
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
This commit add support for certctl in mergemaster and etcupdate. Both will
either rehash or prompt for rehash as new certificates are
trusted/blacklisted.
This work was done primarily by allanjude@, with minor contributions by
myself.
No objection from: secteam
Differential Revision: https://reviews.freebsd.org/D17389
This is a simple utility to hash all trusted on the system into
/etc/ssl/certs. It also allows the user to blacklist certificates they do
not trust.
This work was done primarily by allanjude@, with minor contributions by
myself.
No objection from: secteam
Differential Revision: https://reviews.freebsd.org/D16857
This avoids PATH conflicts with a real httpd, as a user will likely almost
always prefer the more fully-featured httpd. This also lines up with the
historical name of the program.
picobsd/tinyware has had this compact HTTPD server for a long time, and some
people do use it. Move it out into usr.sbin well in advance of any action
being taken on picobsd.
This has been gated behind an HTTPD option defaulted to *off*, primarily for
two reasons:
1.) This code likely needs a good audit, as it's been living off in picobsd
land for a long time, and
2.) We don't currently ship an httpd and this may not be a welcome surprise.
Reviewed by: eugen
Differential Revision: https://reviews.freebsd.org/D21724
Extend the net backend interface with two functions, namely netbe_rx_disable()
and netbe_rx_enable(), which can be used by the net device emulators to stop
the backend from invoking the receive callback. This is useful for device
emulators, i.e., on hardware resets or to implement receive backpressure.
The mevent module has been extendede to support the addition of a disabled
event. To prevent race conditions, the net backends will start with receive
operation disabled. A follow-up patch will use the new functionalities in
the virtio-net device.
Reviewed by: jhb, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20973
- split synopsis into separate options that can't be used together
- sort options
- fix (style) issues reported by mandoc lint
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D21710
This commit adds two new extensions to crontab, ported from OpenBSD:
- -n: suppress mail on succesful run
- -q: suppress logging of command execution
The -q option appears decades old, but -n is relatively new. The
original proposal by Job Snijder can be found here [1], and gives very
convincing reasons for inclusion in base.
This patch is a nearly identical port of OpenBSD cron for -q and -n
features. It is written to follow existing conventions and style of the
existing codebase.
Example usage:
# should only send email, but won't show up in log
* * * * * -q date
# should not send email
* * * * * -n date
# should not send email or log
* * * * * -n -q date
# should send email because of ping failure
* * * * * -n -q ping -c 1 5.5.5.5
[1]: https://marc.info/?l=openbsd-tech&m=152874866117948&w=2
PR: 237538
Submitted by: Naveen Nathan <freebsd_t.lastninja.net>
Reviewed by: bcr (manpages)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D20046
`freebsd-update updatesready' can be used to check if there are any pending
fetched updates that can be installed.
`freebsd-update showconfig' writes freebsd-update's configuration to
stdout.
This also changes the exit code of `freebsd-update install' to 2 in case
there are no updates pending to be installed and there wasn't a fetch phase
in the same invocation. This allows scripts to tell apart these error
conditions without breaking existing jail managers.
See freebsd-update(8) for details.
PR: 240757, 240177, 229346
Reviewed by: manpages (bcr), sectam (emaste), yuripv
Differential Revision: https://reviews.freebsd.org/D21473
message:
On non-x86 systems, use "quarterly" packages.
x86 architectures have "latest" package builds on stable/*, so keep using
those (they'll get switched over to "quarterly" during releases).
The original commit was a direct commit to stable/12, as at the time it
was presumed it would not be necessary for head. However, when it is time
to create a releng branch or switch from PRERELEASE/STABLE to BETA/RC, the
pkg(7) Makefile needs further adjusting. This commit includes those
further adjustments, evaluating the BRANCH variable from release/Makefile
to determine the pkg(7) repository to use.
MFC after: immediate (if possible)
Sponsored by: Rubicon Communications, LLC (Netgate)
igor follows American style guides in the belief that abbreviations i.e.
and e.g. are always followed by a comma. Make that change now so that
future updates to freebsd-update.8 do not complain about this.
Submitted by: grembo
Event: EuroBSDCon Norway FreeBSD DevSummit
log daemon facility now that daemon(8) has syslog support which defaults to
daemon facility, info priority
Reviewed by: bapt
Approved by: bapt
Differential Revision: https://reviews.freebsd.org/D21561
pages to page as necessary.
To restore historic BSD behaviour add the following to ntp.conf:
rlimit memlock 32
Discussed on: freebsd-current@ between Sept 6-9, 2019
Reported by: Users using ASLR with stack gap != 0
Reviewed by: ian, kib, rgrimes (all previous versions)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21581
This commit fixes bug: command "jail -r" didn't trigger pre/post stop
commands (and others) defined in config file if jid is specified insted of
name. Also it adds basic tests for usr.sbin/jail to avoid regression.
Reviewed by: jamie, kevans, ray
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D21328
This only lists the changed type and not other attributes so that it
matches the behavior of -C as done in r66747 for fmtree. The NetBSD
-ff implementation was copied from fmtree.
Reviewed by: imp
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D21623
location.
With newer import of libedit, the path to be able to access readline/readline.h
will also include header which name will conflict with some expected by ntp in
another path and end up breaking the build.
Setting the B_INVALONERR flag before a synchronous write causes the buf
cache to forcibly invalidate contents if the write fails (BIO_ERROR).
This is intended to be used to allow layers above the buffer cache to make
more informed decisions about when discarding dirty buffers without
successful write is acceptable.
As a proof of concept, use in msdosfs to handle failures to mark the on-disk
'dirty' bit during rw mount or ro->rw update.
Extending this to other filesystems is left as future work.
PR: 210316
Reviewed by: kib (with objections)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21539
All of them are needed to be able to boot to single user and be able
to repair a existing FreeBSD installation so put them directly into
FreeBSD-runtime.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21503
This code has been written as a proof of concept, but I think that it
can be useful in general. It allows to set the status of an enclosure
slot. Practically, this means controlling whatever slot status LEDs the
enclosure provides. At present, the new command does not have sanity
checks or any conveniences. That means that it is possible to issue the
command for an invalid slot and an enclosure. But the worst I have seen
happening is either the command failing or simply being ignored. Also,
at the moment, the status has to be specified as a numeric bit mask.
The bit definitions can be found in sys/dev/mps/mpi/mpi2_init.h, they
are prefixed with MPI2_SEP_REQ_SLOTSTATUS_. The only way to address a
slot is by the enclosure handle and the slot number. Both are readily
available from mpsutil show commands.
So, future enhancements could include alternative ways to address a slot
(e.g., by a disk handle or a disk device name) and human friendly names
for slot statuses.
The new command is useful alternative to 'sas2ircu locate' command.
First, sas2ircu is a proprietary blob. Second, it supports setting only
locate / identify status bit.
Tested on HP H220 running LSI IT firmware 20.x.
Reviewed by: bapt
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D20535
This patch fixes a bug that made the mixer command enter
an infinite loop when instructed to set the value of a device
to an empty string (e.g., `mixer vol ""`).
Additionally, some tests for mixer(8) are being added.
PR: 240039
Reviewed by: hselasky, mav
Approved by: src (hselasky, mav)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21409
After populating the filesystem, write a FSInfo block with
proper information.
Reviewed by: emaste, cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21363
There is no need to duplicate this file when it can be trivially
shared (just exposing sections previously under #ifdef _KERNEL).
MFC with: r351273
Differential Revision: The FreeBSD Foundation
There is no reason to duplicate this file when it can be trivially
shared (just exposing one section previously under #ifdef _KERNEL).
Reviewed by: imp, cem
MFC with: r351273
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21346
(The kernel uses caddr_t.)
Suggested by: cem
Reviewed by: cem
MFC with: r351273
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21348
Add FAT support to makefs by copying some files from sys/fs/msdosfs/ and
updating others with changes from NetBSD.
The six files copied from sys/fs/msdosfs at r348251 and modified are:
denode.h direntry.h fat.h msdosfs_fat.c msdosfs_lookup.c msdosfsmount.h
I would prefer to avoid the duplication, but reluctance to doing so was
expressed in a previous review (D11197); for now copy the files and
revisit in the future.
Submitted by: Siva Mahadevan
Discussed with: cem, imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16438
Apparently using tty for this purpose has been deprecated since 4.4 Lite.
Reviewed by: cy
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D21318
