There are no in-kernel consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24775
The opencrypto ioctl code has very useful probe points at the various exit
points. These allow us to figure out exactly why a request failed. However, a
few paths did not have these probe points. Add them here.
Reviewed by: jhb
It no longer has any in-kernel consumers via OCF. smbfs still uses
single DES directly, so sys/crypto/des remains for that use case.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24773
It no longer has any in-kernel consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24772
Back out the IPv6 portion of r360903, as the stamp_tag param
is apparently not supported in upstream FreeBSD.
Sponsored by: Netflix
Pointy hat to: gallatin
There are no longer any in-kernel consumers. The software
implementation was also a non-functional stub.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24771
They no longer have any in-tree consumers. Note that these are a
different from MD5-HMAC and SHA1-HMAC and were only used with IPsec.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24770
This was removed from IPsec in r286100 and no longer has any in-tree
consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24769
It no longer has any in-tree consumers.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24768
Although a few drivers supported this algorithm, there were never any
in-kernel consumers. cryptosoft and cryptodev never supported it,
and there was not a software xform auth_hash for it.
Reviewed by: cem
Relnotes: yes
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24767
Summary:
In r209294 kib added -fno-asynchronous-unwind-tables to the compile
flags for the GNU C startup components. This was done to work around a
BFD ld assertion, "no .eh_frame_hdr table will be created", which is
produced because of the layout of the startup objects.
Add the same flag to lib/csu too, for the same reason. And similarly to
r209294, also add -fno-omit-frame-pointer.
This is primarily meant to quickly MFC to stable/11, so it can end up in
the 11.4 release, as a fix for https://bugs.freebsd.org/246322.
PR: 246322
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D24797
The newer RACK and BBR TCP stacks have added a mechanism
to disable hardware packet pacing for TCP retransmits.
This mechanism works by skipping the send-tag stamp
on rate-limited connections when the TCP stack calls
ip_output() with the IP_NO_SND_TAG_RL flag set.
When doing NIC TLS, we must ignore this flag, as
NIC TLS packets must always be stamped. Failure
to stamp a NIC TLS packet will result in crypto
issues.
Reviewed by: hselasky, rrs
Sponsored by: Netflix, Mellanox
The test makefiles will handle setting mode bits during install. Also,
Phabricator gets upset when uploading an executable plain-text file
without a shebang.
MFC after: 1 week
pf by default does not do per-table address accounting unless the
"counters" keyword is specified in the corresponding pf.conf table
definition. Yet, we always allocate 12 per-CPU counters per table. For
large tables this carries a lot of overhead, so only allocate counters
when they will actually be used.
A further enhancement might be to use a dedicated UMA zone to allocate
counter arrays for table entries, since close to half of the structure
size comes from counter pointers. A related issue is the cost of
zeroing counters, since counter_u64_zero() calls smp_rendezvous() on
some architectures.
Reported by: loos, Jim Pingle <jimp@netgate.com>
Reviewed by: kp
MFC after: 2 weeks
Sponsored by: Rubicon Communications, LLC (Netgate)
Differential Revision: https://reviews.freebsd.org/D24803
Pursuant to r360398, implement driver-specific versions of the
ifdi_needs_restart iflib device method.
Some (if not most?) Intel network cards don't need reinitializing when a
VLAN is added or removed from the device hardware, so these implement
ifdi_needs_restart in a way that tell iflib not to bring the interface
up or down when a VLAN is added or removed, regardless of whether the
VLAN_HWFILTER interface capability flag is set or not.
This could potentially solve several PRs relating to link flaps that
occur when VLANs are added/removed to devices.
Signed-off-by: Eric Joyner <erj@freebsd.org>
PR: 240818, 241785
Reviewed by: gallatin@, olivier@
MFC after: 3 days
MFC with: r360398
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D24659
We know the value must be greater than 0 and less than MAXSECFLAVORS.
Reject values outside this range in the initial check in vfs_export and add KASSERTs
in the later consumers.
Also check that we are called with one of either MNT_DELEXPORT or MNT_EXPORTED set.
Reviewed by: rmacklem
Approved by: mav (mentor)
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D24753
The same thing can be achieved using the bs=$SIZE and conv=sync options.
Unlike conv=osync, conv=sync is support on both Linux and macOS.
Reviewed By: imp, jhb (earlier version)
Obtained from: CheriBSD
Differential Revision: https://reviews.freebsd.org/D24788
rnh_close callbackes was used by the in[6]_clsroute() handlers,
doing cleanup in the route cloning code. Route cloning was eliminated
somewhere around r186119. Last callback user was eliminated in r186215,
11 years ago.
Differential Revision: https://reviews.freebsd.org/D24793
Ok, yeah, the commit title is a bit misleading.
This has to do with CDD (cyclic delay diversity) - how this and later
wifi hardware transmits lower rates over more antennas. Eg, if you're
transmitting legacy 11abg rates on 2 or 3 antennas, you COULD just
send them all at the same time or you could delay each by tens/hundreds
of nanoseconds to try and get some better diversity characteristics.
However, this has a fun side effect - the antenna pattern is no longer
a bunch of interacting dipoles, but are a bunch of interacting dipoles
plus a bunch of changing phases. And it's frequency dependent - 50-200nS
is not exactly the same fraction of a wavelength across all of 2GHz or 5GHz!
Thus the power spectral density and maximum directional gain that you're
effectively getting is not .. well, as flat as it once was.
For more information, look up FCC/OET 13TR1003 in the FCC technical report
database. It has pretty graphics and everything.
Anyway, the problem lies thusly - the CDD code just subtracts another 3dB
or 5dB for the lower rates based on transmit antenna configuration.
However, it's not done based on operating configuration and it doesn't
take into account how far from any regulatory limits the hardware is at.
It also doesn't let us do things like transmit legacy rates and frames
on a single antenna without losing up to 5dB when we absolutely don't
need to in that case (there's no CDD used when one antenna is used!)
This shows up as the hardware behaving even worse for longer distance links
at 20MHz because, well, those are the exact rates losing a bunch more
transmit power.
* For lower power NICs (ie the majority of what is out there!) it's highly
unlikely we're going to hit anywhere near the PSD limits.
* It's doing it based on the existing limits from the CTL table (conformance
testing limits) - this isn't the regulatory max! It's what the NIC is
allowed to put out in each frequency and rate configuration! So things like
band edges, power amplifier behaviour and maximum current draw apply here.
Blindly subtracting 3 to 5dB from /this/ value is /very/ conservative..
* /and/ ath9k just plainly doesn't do any of this at all.
So, for now disable it and get the TX power back, thus matching what ath9k
in Linux is doing. If/once I get some more cycles I'll look at making it
a bit more adaptive and really only kick in if we're a few dB away from
hard regulatory limits.
Tested:
* AR9344 (2GHz + SoC, 2x2 configuration) - AP and STA modes
* QCA9580 (5GHz 2x2 and 3x3 configurations) - AP and STA modes
Summary:
POWER9 supports two MMU formats: traditional hashed page tables, and Radix
page tables, similar to what's presesnt on most other architectures. The
PowerISA also specifies a process table -- a table of page table pointers--
which on the POWER9 is only available with the Radix MMU, so we can take
advantage of it with the Radix MMU driver.
Written by Matt Macy.
Differential Revision: https://reviews.freebsd.org/D19516
if foo; then blah else blah; fi has a drastically different meaning than
if foo; then blah; else blah; fi. Fix it.
Reported by: 0mp
X-MFC-With: r360833
Summary:
Some machine checks are process-recoverable, others are not. Let a
CPU-specific handler decide what to do.
This works around a machine check error hit while building www/firefox
and mail/thunderbird, which would otherwise cause the build to fail.
More work is needed to handle all possible machine check conditions, but
this is sufficient to unblock some ports building.
Differential Revision: https://reviews.freebsd.org/D23731
`metalog.lua` is a script that reads METALOG file created by pkgbase
(make packages) and generates reports about the installed system
and issues.
This was developed as part of Yang's W2020 University of Waterloo co-
operative education term with the FreeBSD Foundation. kevans provided
some initial review; we will iterate on it in the tree.
Submitted by: Yang Wang <2333@outlook.jp>
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24563
r360870 added linux/slab.h into liunx/bitmap.h and this include linux/types.h
The qlnx driver is redefining some of those types so remove them and add an
explicit linux/types.h include.
Pointy hat: manu
Reported by: Austin Shafer <ashafer@badland.io>
This is a simple call to kmallock_array/kfree, therefore include linux/slab.h as
this is where the kmalloc_array/kfree definition is.
Sponsored-by: The FreeBSD Foundation
Reviewed by: hselsasky
Differential Revision: https://reviews.freebsd.org/D24794
Last user of rtalloc1() KPI has been eliminated in rS360631.
As kernel is now fully switched to use new routing KPI defined in
rS359823, remove old lookup functions.
Differential Revision: https://reviews.freebsd.org/D24776
This is stuff I've been running for a couple years. It's inspired by changes
I found in the linux ag71xx ethernet driver.
* Delay between stopping DMA and checking to see if it's stopped; this gives
the hardware time to do its thing.
* Non-final frames in the chain need to be a multiple of 4 bytes in size.
Ensure this is the case when assembling a TX DMA list.
* Add counters for tx/rx underflow and too-short packets.
* Log if TX/RX DMA couldn't be stopped when resetting the MAC.
* Add some more debugging / logging around TX/RX ring bits.
Tested:
* AR7240, AR7241
* AR9344 (TL-WDR3600/TL-WDR4300 APs)
* AR9331 (Carambola 2)
bitmap_copy simply copy the bitmaps, no idea why it exists.
bitmap_andnot is similar to bitmap_and but uses !src2.
Sponsored-by: The FreeBSD Foundation
Reviewed by: hselasky
Differential Revision: https://reviews.freebsd.org/D24782
It can be dangerous and there is no need for it in the kernel.
Inspired by Kees Cook's change in Linux, and later OpenBSD.
Reviewed by: cem, gordon, philip
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D24760
