This driver was for an early and uncommon legacy PCI 10GbE for a single
ASIC, Intel 82597EX. Intel quickly shifted to the long lived ixgbe family.
Submitted by: kbowling
Reviewed by: brooks imp jeffrey.e.pieper@intel.com
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15234
This driver supports legacy, 32-bit PCI devices, and had an ambiguous
license. Supported devices were already reported to be rare in 2003
(when an earlier version of the driver was removed in r123201).
Reviewed by: rgrimes
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15245
This is a prequisite before we remove the driver from -current.
Reviewed by: emaste kbowling imp
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D15244
Previously it was possible to connect a socket (which had the
CAP_CONNECT right) by calling "connectat(AT_FDCWD, ...)" even in
capabilties mode. This combination should be treated the same as a call
to connect (i.e. forbidden in capabilities mode). Similarly for bindat.
Disable connectat/bindat with AT_FDCWD in capabilities mode, fix up the
documentation and add tests.
PR: 222632
Submitted by: Jan Kokemüller <jan.kokemueller@gmail.com>
Reviewed by: Domagoj Stolfa
MFC after: 1 week
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D15221
Add a driver that match on 'rockchip,gpio-bank', this compatible
string is found on almost all RockChip SoC so this driver is compatible
with almost all of the RockChip SoCs.
The only features missing for this driver are :
- Interrupts support
- Debouncing
Add pinctrl driver for RockChip SoCs. This device manage which function
to set on which pin and some other properties like pull up/down, drive
strength etc ...
For now the driver only support RK3328 but it is versatile enough to
add support for other RockChip SoC in the future.
RockChip GRF (General Register Files) is present on almost all RockChip
SoC and is used to control some area of the system like iomuxing, gpio
or usb phy.
We need it to be probed and attached early in the boot process so
subclass syscon_generic and set the pass to BUS_PASS_BUS + BUS_PASS_ORDER_MIDDLE.
- Microsemi SCSI driver for PQI controllers.
- Found on newer model HP servers.
- Restrict to AMD64 only as per developer request.
The driver provides support for the new generation of PQI controllers
from Microsemi. This driver is the first SCSI driver to implement the PQI
queuing model and it will replace the aacraid driver for Adaptec Series 9
controllers. HARDWARE Controllers supported by the driver include:
HPE Gen10 Smart Array Controller Family
OEM Controllers based on the Microsemi Chipset.
Submitted by: deepak.ukey@microsemi.com
Relnotes: yes
Sponsored by: Microsemi
Differential Revision: https://reviews.freebsd.org/D14514
device-side (and only device-side) "virtual USB serial adapters" - the
ones you can get with an OTG-capable board - as consoles. It boils down
to adding the device name to kern.console sysctl, although doing that
requires jumping through some hoops. It doesn't change the actual
operation of those virtual devices. The point is to make it possible
for init(8) to recognize them as console devices and to launch getty(8)
for them, when configured as "onifconsole" in ttys(5). The point of
that, in turn, is to add such entries to the default ttys(5), so that
init(8) will launch gettys for device-side "virtual serial adapters",
but not for actual USB serial dongles.
Reviewed by: hselasky@
No objections: imp@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
We intend to remove support before FreeBSD 12 is branched. These are
available only as 32-bit PCI devices. The driver has an ambiguous
license and I have not been successful in contacting the driver's author
in order to address this.
The planned deprecation has been announced on -current and -stable; if
we receive feedback that the driver is still useful and we are able to
resolve the license issue this deprecation notice can be reverted.
Reviewed by: bapt, brooks, imp, rgrimes
MFC after: 2 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15182
Half of implementations always failed (returned (-1)) and they were
previously used in only one place.
Reviewed by: kib, andrew
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15102
Also remove the commented out documentation. The documentation arrived
with the import of the copy.9 manpage. I suspect the implementations
came from NetBSD while bootstrapping the Arm and MIPS ports.
Reviewed by: andrew, jmallett
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15108
While Arcnet has some continued deployment in industrial controls, the
lack of drivers for any of the PCI, USB, or PCIe NICs on the market
suggests such users aren't running FreeBSD.
Evidence in the PR database suggests that the cm(4) driver (our sole
Arcnet NIC) was broken in 5.0 and has not worked since.
PR: 182297
Reviewed by: jhibbits, vangyzen
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15057
Defines in net/if_media.h remain in case code copied from ifconfig is in
use elsewere (supporting non-existant media type is harmless).
Reviewed by: kib, jhb
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15017
It's had a good life, but it's not really configurable and not really used.
Obtained from: opBSD (with some changes)
Differential Revision: https://reviews.freebsd.org/D14991
and VMware legal:
- Add a dual BSD-2 Clause/GPLv2 LICENSE file in the VMCI directory
- Remove the use of "All Rights Reserved"
- Per best practice, remove copyright/license info from Makefile
Reviewed by: imp, emaste, jhb, Vishnu Dasa <vdasa@vmware.com>
Approved by: VMware legal via Mark Peek <markpeek@vmware.com>
Differential Revision: https://reviews.freebsd.org/D14979
We intend to remove support before FreeBSD 12 is branched.
Reviewed by: imp, emaste
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14890
The ocs_fc(4) driver supports the following hardware:
Emulex 16/8G FC GEN 5 HBAS
LPe15004 FC Host Bus Adapters
LPe160XX FC Host Bus Adapters
Emulex 32/16G FC GEN 6 HBAS
LPe3100X FC Host Bus Adapters
LPe3200X FC Host Bus Adapters
The driver supports target and initiator mode, and also supports FC-Tape.
Note that the driver only currently works on little endian platforms. It
is only included in the module build for amd64 and i386, and in GENERIC
on amd64 only.
Submitted by: Ram Kishore Vegesna <ram.vegesna@broadcom.com>
Reviewed by: mav
MFC after: 5 days
Relnotes: yes
Sponsored by: Broadcom
Differential Revision: https://reviews.freebsd.org/D11423
Add a new "interleave" allocation policy which stripes pages across
domains with a stride or width keeping contiguity within a multi-page
region.
Move the kernel to the dedicated numbered cpuset #2 making it possible
to assign kernel threads and memory policy separately from user. This
also eliminates the need for the complicated interrupt binding code.
Add a sysctl API for viewing and manipulating domainsets. Refactor some
of the cpuset_t manipulation code using the generic bitset type so that
it can be used for both. This probably belongs in a dedicated subr file.
Attempt to improve the include situation.
Reviewed by: kib
Discussed with: jhb (cpuset parts)
Tested by: pho (before review feedback)
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14839
For some reason, the other link - https://lists.FreeBSD.org/ - needs
the trailing slash, otherwise man(8) renders it in a weird way. No
idea why's that. At least try to be consistent. Revert it when the
other link gets fixed.
MFC after: 2 weeks
