As part of the 8.0-RELEASE cycle this was done in stable/8 (r199112)
but was left alone in head so people could work on fixing an issue that
caused boot failure on some motherboards. Apparently nobody has worked
on it and we are getting reports of boot failure with the 9.0 test builds.
So this time I'll comment out the driver in head (still hoping someone
will work on it) and MFC to stable/9.
Submitted by: Alberto Villa <avilla at FreeBSD dot org>
the text of the menu selections doesn't get displayed properly and it
makes the installer appear to lock up for no obvious reason.
Reviewed by: nwhitehorn
- In the argc == 0 case, just populate the mount list as before, but
do not calculate widths, update totals or print anything.
- In the argv > 0 case, collect information about the requested file
systems and store it in the mount list, but do not calculate
widths, update totals or print anything.
- In either case, once all the information has been collected,
iterate once through the mount list to calculate widths and totals,
then once more to print everything.
This also fixes two bugs: firstly, column widths were not calculated
correctly if more than one file system was specified on the command
line; and secondly, file systems with MNT_IGNORE were included in the
totals even if -a was not specified.
Noticed by: Paul Schenkeveld
MFC after: 3 weeks
- update xlp_machdep.c to read arguments from FDT if FDT support is
compiled in.
- define rmi_uart_bus_space, and use it as fdtbus_bs_tag
- update conf files for FDT support
- add default dts file xlp-basic.dts
It seems the D_PSEUDO flag was meant to allow make_dev() to return NULL.
Nowadays we have a different interface for that; make_dev_p(). There's
no need to keep it there.
While there, remove an unneeded D_NEEDMINOR from the gpio driver.
Discussed with: gonzo@ (gpio)
only logged instances where an operation on a file descriptor required
capabilities which the file descriptor did not have. By adding a type enum
to struct ktr_cap_fail, we can catch other types of capability failures as
well, such as disallowed system calls or attempts to wrap a file descriptor
with more capabilities than it had to begin with.
Some earlier series (~AR5212?) play badly with BIOSes.
In these instances, they may require a forced reset (by transitioning
the NIC through D0 -> D3 -> D0) before they probe/attach correctly.
This is currently disabled because:
* I haven't figured out the "right" code to ensure this only happens
for PCI NICs (not PCIe or Cardbus);
* I haven't at all done wide scale testing for this, and I'm not yet
ready for said wide-scale testing.
I'm documenting this primarily so users with misbehaving NICs have
something to tinker with.
Obtained from: Atheros
The final missing bit here is enabling the PCI configuration register
read, but there's currently no glue available for the HAL to read (and
write) PCI configuration space registers.
Obtained from: Atheros
The AR5008/AR9001 series NICs have a bug where BB register reads
will occasionally be corrupted. This could cause issues with things
such as ANI, which adjust operational parameters based on the
BB radio register reads. This was introduced in the AR5008 chip
and fixed with the first released AR9002 series NIC (AR9280v2.)
A followup commit will implement the acutal WAR when reading
BB registers. I'm still not sure how I'll implement it - whether
it should be done in the osdep layer, or whether it should just
live in the AR5416 HAL. Either way, they can use this capability
bit to determine whether to implement the WAR or not.
Thankyou to various sources inside Atheros who have helped me track
down what this particular issue is.
Obtained from: Atheros
There are HAL methods which are actually direct register
access, rather than simply HAL calls. Because of this, these
register accesses would use the non-debug path in ah_osdep.h
as opt_ah.h isn't included.
With this, the correct register access methods are used,
so debugging traces show things such as TXDP checking and
TSF32 access.
When calculating space needed for SA_BONUS buffers,
hdrsize is always rounded up to next 8-aligned boundary.
However, in two places the round up was done against
sum of 'total' plus hdrsize. On the other hand,
hdrsize increments by 4 each time, which means in
certain conditions, we would end up returning with
will_spill == 0 and (total + hdrsize) larger than
full_space, leading to a failed assertion because
it's invalid for dmu_set_bonus.
Sponsored by: iXsystems, Inc.
Reviewed by: mm
MFC after: 3 days
Because driver is accessing a common MII structure in
mii_pollstat(), updating user supplied structure should be done
before dropping a driver lock.
Reported by: Karim (fodillemlinkarimi <> gmail dot com)
Because driver is accessing a common MII structure in
mii_pollstat(), updating user supplied structure should be done
before dropping a driver lock.
Reported by: Karim (fodillemlinkarimi <> gmail dot com)
That way the radar errors aren't enabled prematurely.
A DFS tester has reported that radar events are reported
during channel scanning, before DFS is actually enabled.
Use the offset into the device tree from fdtp as the phandle instead
of using pointer into the device tree. This will make sure that the
phandle fits into a uint32_t type, even when compiled for 64bit.
Reviewed by: raj, nathanw, marcel
on the largest multi-write size.
From the submitter:
==
I looked further into the magic 88-byte threshold after which the bug
occurs. It turns out that figure included the 24-byte tx_desc, and up
to 64 bytes of beacon frame (header+data).
rum_write_multi doesn't seem happy with writing >64 bytes at a time to
the MAC register. If I break it up into separate calls (e.g. bytes
0-63, then bytes 64-65, written at the appropriate offset) I see the
proper beacon frames being transmitted now.
==
Submitted by: Steven Chamberlain <steven@pyro.eu.org>
MFC after: 3 days
for interfaces which were not configured for DHCP *unless* rc_force was set;
the correct logic is to run dhclient for those interfaces *only if* rc_force
is set.
Broken by: des@
Noticed by: everybody and his dog
Submitted by: rea@
PR: bin/161733
library," since complex.h, tgmath.h, and fenv.h are also part of the
math library. Replace the outdated sentence with some references to
the other parts.
Reading /dev/mem in 64 bit kernel crashes. This is because the page
used to call uiomove_fromphys() from memrw() does not have md.pv_list
initialized correctly.
The fix is to call pmap_page_init() on the page to initialize it.
separation rewrite changes. r196865 was committed to fix a scope
violation problem in the following test scenario:
box-1# ifconfig em0 inet6 2001:db8:1:: prefixlen 64 anycast
box-1# ifconfig em1 inet6 2001:db8:2::1 prefixlen 64
box-2# ifconfig re0 inet6 2001:db8:1::6 prefixlen 64
em0 and re0 are on the same link.
box-2# ping6 2001:db8:1::
PING6(56=40+8+8 bytes) 2001:db8:1::6 --> 2001:db8:1::
the ICMPv6 response should have a source address of em1, which
is 2001:db8:2::1, not the link-local address of em0.
That code is no longer necessary and breaks the IPv6-Ready logo
testing, so revert it now.
Reviewed by: hrs
MFC after: 3 days
and the caller requested other process' PID by passing non-NULL pidptr
argument, we will wait at most 100ms for the PID to show up in the file and if
it won't, we will store -1 in *pidptr.
From now on, pidfile_open() function never sets errno to EAGAIN on failure.
In collaboration with: des
MFC after: 1 week
