In my attempt to limit the commit in r331936 to only the gets_s()
commit and not include unrelated patches in my tree, this patch
was missed.
Reported by: pfg
MFC after: 2 weeks
X-MFC with: r331936
Differential Revision: https://reviews.freebsd.org/D12785
While I'm at it correct the update date in the man page.
Reported by: ed@
MFC after: 2 weeks
X-MFC with: r331936
Differential Revision: https://reviews.freebsd.org/D12785
x86/cpu_machdep.c now needs to include elan_mmcr.h when CPU_ELAN is set.
While here, also remove the now unneeded inclusion of isareg.h in i386
and amd64 vm_machdep.c.
Reported by: lwhsu
MFC after: 14 days
X-MFC with: r331878
captured and reported the highest window advertisement with the same
SEQ/ACK. However, the window comparison uses modulo 2**16 math, rather
than directly comparing the absolute values. Because windows use
absolute values and not modulo 2**16 math (i.e. they don't wrap), we
need to compare the absolute values.
Reviewed by: gallatin
MFC after: 3 days
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D14937
When I moved these functions from i386 and amd64 to x86 I dropped their
prototype declarations (that were correct) and left only their definitions
that became incorrect.
Reported by: bde
MFC after: 15 days
X-MFC with: r331878
The Zynq/Zedboard GPIO driver attempts to tri-state all GPIO pins on
boot up but the order in which I reset the hardware can cause the pins
to be briefly held low before being tri-stated. This is a problem on
boards that use GPIO pins to reset devices.
In particular, the Zybo and ZC-706 boards use a GPIO pin as a USB PHY
reset. If U-boot enables the USB port before booting the kernel, the
GPIO driver attach causes a glitch on the USB PHY reset and the USB
port loses power. My fix is to have the GPIO driver leave the pins in
whatever configuration U-boot placed them.
PR: 225713
Submitted by: Thomas Skibo <thoma555-bsd@yahoo.com>
MFC after: 1 week
Effectively disabling the mode changing bits in the loader. No matter which
way we go with it, it seems to be wrong- either the firmware doesn't change
the resolution and reports the resolution we requested, or the firmware
changes the resolution and doesn't report the resolution we requested. It
some cases, it does the right thing, but the bad cases outweight those.
Interested individuals can still set efi_max_resolution to 1080p or whatnot
in loader.conf(5) to restore the new behavior, but the new behavior does not
work out well for many cases.
Discussed with: imp
The TCB is read using a memory window right now. A better alternate to
get self-consistent, uncached information would be to use a GET_TCB
request but waiting for a reply from hw while holding non-sleepable
locks is quite inconvenient.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D14817
As with AIM64, map the DMAP at the beginning of the fourth "quadrant" of
memory, and move the KERNBASE to the the start of KVA.
Eventually we may run the kernel out of the DMAP, but for now, continue
booting as it has been.
It should fix ck_pr_[load|store]_ptr on mips and riscv, make sure no
*fence instructions are used on i386, as older cpus don't support it, and
make sure we don't rely on gcc builtins that can lead to calls to
libatomic when linked with -O0.
MFC after: 1 week
The division added in r331732 meant that we wouldn't attempt a
background laundering until at least v_free_target - v_free_min clean
pages had been freed by the page daemon since the last laundering. If
the inactive queue is depleted but not completely empty (e.g., because
it contains busy pages), it can thus take a long time to meet this
threshold. Restore the pre-r331732 behaviour of using a non-zero
background laundering threshold if at least one inactive queue scan has
elapsed since the last attempt at background laundering.
Submitted by: tijl (original version)
Because I didn't see any reason not too.
I've been making some changes to the code and couldn't help but notice
that the i386 and am64 code was nearly identical.
MFC after: 17 days
If cpu_reset() is called on an AP and if it somehow fails to wake the
BSP, then it's better to attempt the reset on the AP than just sit there
spinning on an unusable and undebuggable system.
MFC after: 16 days
The processor is "parked" in a spin-loop already and that's sufficient
for the reset. There is nothing that stop_cpus() would add here, only
extra complexity and fragility.
The original processor does not need to enable interrupts now, in fact,
it must not do that.
MFC after: 2 weeks
single slab, but with alignment adjustment it won't. Again, when
there is only one item in a slab alignment can be ignored. See
previous revision of this file for more info.
PR: 227116
and zone has a large alignment. With alignment taken into
account uk_rsize will be greater than space in a slab. However,
since we have only one item per slab, it is always naturally
aligned.
Code that will panic before this change with 4k page:
z = uma_zcreate("test", 3984, NULL, NULL, NULL, NULL, 31, 0);
uma_zalloc(z, M_WAITOK);
A practical scenario to hit the panic is a machine with 56 CPUs
and 2 NUMA domains, which yields in zone size of 3984.
PR: 227116
MFC after: 2 weeks
per-cpu alloc and free of pages. The cache is filled with as few trips
to the phys allocator as possible by the use of a new
vm_phys_alloc_npages() function which allocates as many as N pages.
This code was originally by markj with the import function rewritten by
me.
Reviewed by: markj, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
Differential Revision: https://reviews.freebsd.org/D14905
a cache of fully populated buckets. This will be used in a follow-on
commit.
The flag idea was originally from markj.
Reviewed by: markj, kib
Tested by: pho
Sponsored by: Netflix, Dell/EMC Isilon
This commit splits all of the logodefs/graphics out into their own own files
and provides a method for these files to register their logodefs with the
drawer. Graphics are now loaded on demand if they don't exist in the current
set of logodefs.
The drawer module becomes a little easier to navigate through without all of
the graphics mixed in. It's also easy to do one-off graphics like the
9.2 Die Hard tribute by dteske@ without adding even more to our memory
requirements.
- No need for a 'goto' when our entire loop body is then wrapped in a
conditional.
- No need to leave commented out prints laying around
- If an expression is clearly going to be either nil or an expression that
isn't likely to be a boolean, we might as well use `or` to specify a
default value for the expression. e.g. `loader.getenv(...) or "no"`
The previous iteration of this assumed that {module}_load was set. In the
old world order of default loader.conf(5), this was probably a safe
assumption given that we had almost every module explicitly not-loaded in
it.
In the new world order, this is no longer the case, so one could delete a
_load line inadvertently while leaving a _name, _type, _flags, _before,
_after, or _error. This would have caused a confusing Lua error and borked
module loading.
When I implemented my EFI support I failed to check if the upstream version
of makefs in NetBSD had done the same. Override my version with theirs to
make it easier to stay in sync with them in the future.
Reviewed by: imp, mav
Obtained from: NetBSD
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D14913
This fixes a failure to resolve object file paths seen when buildkernel
(which sets MK_AUTO_OBJ=yes) and installkernel (which sets MK_AUTO_OBJ=no)
are run as separate steps. r329232 partially fixed this scenario by removing
MAKEOBJDIR, but it seems the AUTO_OBJ setting also needs to be on the same
page for the build and install steps.
Reviewed by: bdrewery
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D14143
- The two types must be type-punnable for shared members of ifr_ifru.
This allows compatibility accessors to be shared.
- There must be no padding gap between ifr_name and ifr_ifru. This is
assumed in tcpdump's use of SIOCGIFFLAGS output which attempts to be
broadly portable. This is true for all current architectures, but very
large (256-bit) fat-pointers could violate this invariant.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14910
We intend to remove support before FreeBSD 12 is branched.
Reviewed by: imp, emaste
MFC after: 3 days
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14890
The common pratice in ethernet device drivers is to fall back to
ether_ioctl() to implement generic ioctls not implemented by the driver
and to fail if no handler exists.
Convert these drivers to follow that practice rather than calling
ether_ioctl() for specific cases.
vxge(4) aready had the default case, but it was only called on failure
to match.
Reviewed by: imp
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14895
- Make sure Giant is locked when calling PCI device methods.
Newbus currently requires this.
- Avoid unlocking Giant right before aquiring the sleepqueue lock.
This can save a task switch.
MFC after: 1 week
Sponsored by: Mellanox Technologies
