* don't poke ath_hal_txstart() if nothing was pushed into the FIFO during
the refill process;
* shuffle around the TX debugging output a little so it's logged at
TX hardware enqueue;
* Add logging of the TX status processing.
The copies of initarm used on platforms with FDT support were almost
identical. The differences were pulled out into separate functions that
were called by initarm.
This change merges the, now identical, copies of initarm and a few of it's
support functions. This is a step towards a common kernel on ARMv6.
Although sufficient memory is available for a longer string in cmdname,
this is undefined behaviour anyway.
Side effect: for alignment reasons, an additional byte of memory is
allocated per hashed command.
of small (< 256 byte) aggregate frames.
This needs to be done or 11n aggregation TX just simply doesn't work
on these NICs.
Whilst here, extend some debug printing; I was using this whilst
debugging the TX power setup in the TX descriptor(s) on the AR9380.
programmed on the BSP during (early) boot. This makes sure
that the APs get configured the same as the BSP, irrspective
of how FreeBSD was loaded.
2. Make sure to flush the dcache after writing the TLB1 entries
to the boot page. The APs aren't part of the coherency domain
just yet.
3. Set pmap_bootstrapped after calling pmap_bootstrap(). The
FDT code now maps the devices (like OF), and this resulted
in a panic.
4. Since we pre-wire the CCSR, make sure not to map chunks of
it in pmap_mapdev().
The automation can set TARGET_ARCH and TARGET and then make various
top-level targets, including buildLINT and buildkernel (with
KERNCONF=LINT). Previously there was no way to generate the LINT
kernel configuration without having to do something exceptionally
painful.
(implemented by ffs_reallocblks_ufs[12]) relocates the file's blocks
so as to cluster them together into a contiguous set of blocks on
the disk.
When the cluster crosses the boundary into the first indirect block,
the first indirect block is initially allocated in a position
immediately following the last direct block. Block reallocation
would usually destroy locality by moving the indirect block out of
the way to keep the data blocks contiguous. This change compensates
for this problem by noting that the first indirect block should be
left immediately following the last direct block. It then tries
to start a new cluster of contiguous blocks (referenced by the
indirect block) immediately following the indirect block.
We should also do this for other indirect block boundaries, but it
is only important for the first one.
Suggested by: Bruce Evans
MFC: 2 weeks
give rwlock(9) the ability to crunch different type of structures, with
the only constraint that they have a lock cookie named rw_lock.
This name, then, becames reserved from the struct that wants to use
the rwlock(9) KPI and other locking primitives cannot reuse it for
their members.
Namely such structs are the current struct rwlock and the new struct
rwlock_padalign. The new structure will define an object which has the
same layout of a struct rwlock but will be allocated in areas aligned
to the cache line size and will be as big as a cache line.
For further details check comments on above mentioned revisions.
Reviewed by: jimharris, jeff
Since I've committed this I've receieved roughly an equal
amount of email thanking me for making this change
and asking me to revert it.
I've resisted making this change because
new users tend to prefer less over more
and these users are the least likely to know
how to change the PAGER on their own.
Requested by: many
Objected to: just as many
Decision made by: core
Approved by: cperciva
MFC after: 3 days
* introduce a new HAL API method to pull out the TX status descriptor
contents.
* Add num_delims to the 11n first aggr method. This isn't used by the
driver at the moment so it won't affect anything.
command properly. Without this change, mfi(4) always sends 10 byte READ
and WRITE commands, which will cause data corruption when device is
larger than 2^32 sectors.
PR: kern/173291
Submitted by: Steven Hartland <steven.hartland multiplay.co.uk>
Reviewed by: mav
MFC after: 2 weeks
the previous diradd had already finished it could have been reclaimed
already. This would only happen under heavy dependency pressure.
Reported by: Andrey Zonov <zont@FreeBSD.org>
Discussed with: mckusick
MFC after: 1 week
was still possible to open for write from the lower filesystem. There
is a symmetric situation where the binary could already has file
descriptors opened for write, but it can be executed from the nullfs
overlay.
Handle the issue by passing one v_writecount reference to the lower
vnode if nullfs vnode has non-zero v_writecount. Note that only one
write reference can be donated, since nullfs only keeps one use
reference on the lower vnode. Always use the lower vnode v_writecount
for the checks.
Introduce the VOP_GET_WRITECOUNT to read v_writecount, which is
currently always bypassed to the lower vnode, and VOP_ADD_WRITECOUNT
to manipulate the v_writecount value, which manages a single bypass
reference to the lower vnode. Caling the VOPs instead of directly
accessing v_writecount provide the fix described in the previous
paragraph.
Tested by: pho
MFC after: 3 weeks
provide this information along with messages documentation,
like this done in manual pages for other netgraph nodes.
Submitted by: Mamontov Roman <mr.xanto gmail.com>
