Commit Graph

183165 Commits

Author SHA1 Message Date
Ian Lepore
df736d55a1 During card identification, run the bus at 400KHz, not the minimum
speed the bus claims to be capable of.  The 400KHz speed is dictated
by the SD and MMC standards.
2013-08-16 20:32:56 +00:00
Jilles Tjoelker
9bb8ccd642 sh: Remove unnecessary reset functions.
These are already handled by exception handlers.
2013-08-16 20:24:41 +00:00
Ian Lepore
65f63c73cb Print the card relative address in hex, because that's what all the
other debugging output does (when it appears in command arguments,
for example).
2013-08-16 20:22:57 +00:00
Ian Lepore
54c665855d Add named constants for 8-bit bus support. The sdhci and mmc drivers
don't have support for this yet, but some low-level hardware is ready
for it when the higher layers catch up.
2013-08-16 19:44:49 +00:00
Ian Lepore
ceb9e9f70d When the timeout clock is based on the SD clock, the timeout counter
has to be recalculated every time the SD clock frequency changes.

Also, tidy up the counter calculation... it makes no sense to calculate
a value one larger than the limit, then whine that it's too large and
truncate it to the limit.  If the BROKEN_TIMEOUT quirk is set, don't
calculate the counter at all, just set it to the limit value.
2013-08-16 19:40:00 +00:00
Simon J. Gerraty
9a4bc556be Add .MAKE.ALWAYS_PASS_JOB_QUEUE knob (default yes)
for backwards compatability.
2013-08-16 18:47:18 +00:00
Simon J. Gerraty
a6822ce859 When we need to build using the in-tree make,
switch at the earliest opportunity.
In the case of fmake vs bmake, this helps ensure correct load handling.

Reviewed by: obrien
2013-08-16 16:26:23 +00:00
Kenneth D. Merry
aeb681d798 Add unmapped I/O and larger I/O support to the sa(4) driver.
We now pay attention to the maxio field in the XPT_PATH_INQ CCB,
and if it is set, propagate it up to physio via the si_iosize_max
field in the cdev structure.

We also now pay attention to the PIM_UNMAPPED capability bit in the
XPT_PATH_INQ CCB, and set the new SI_UNMAPPED cdev flag when the
underlying SIM supports unmapped I/O.

scsi_sa.c:	Add unmapped I/O support and propagate the SIM's
		maximum I/O size up.

		Adjust scsi_tape_read_write() in the same way that
		scsi_read_write() was changed to support unmapped
		I/O.  We overload the readop parameter with bits
		that tell us whether it's an unmapped I/O, and we
		need to set the CAM_DATA_BIO CCB flag.  This change
		should be backwards compatible in source and
		binary forms.

MFC after:	1 week
Sponsored by:	Spectra Logic
2013-08-16 16:14:32 +00:00
Konstantin Belousov
b1dd38f408 Restore the previous sendfile(2) behaviour on the block devices.
Provide valid .fo_sendfile method for several missed struct fileops.

Reviewed by:	glebius
Sponsored by:	The FreeBSD Foundation
2013-08-16 14:22:20 +00:00
Jilles Tjoelker
fdafa7840f pselect(2): Add xref to sigsuspend(2). 2013-08-16 14:06:29 +00:00
Jilles Tjoelker
f0ef49bbf4 sh: Recognize "--" as end of options in bg/fg/jobid builtins. 2013-08-16 13:56:43 +00:00
Jilles Tjoelker
4fe1afd789 sh: Add test for the non-standard jobid builtin. 2013-08-16 13:48:11 +00:00
Jilles Tjoelker
fcaac274c0 Add tests for dup3(). 2013-08-16 13:16:55 +00:00
Jilles Tjoelker
5219e2caba Add man page dup3(3). 2013-08-16 13:16:27 +00:00
Jilles Tjoelker
67560dcfb5 Add dup3(), based on F_DUP2FD and F_DUP2FD_CLOEXEC fcntls.
I removed functionality not proposed for POSIX in Austin group issue #411.
A man page (my own) and test cases will follow in later commits.

PR:		176233
Submitted by:	Jukka Ukkonen
2013-08-16 13:10:30 +00:00
Dag-Erling Smørgrav
d06cb0764e GC unused source file. 2013-08-16 10:53:36 +00:00
Kevin Lo
612cf1ca01 Bring datasheet URL up to date. 2013-08-16 07:42:06 +00:00
Gleb Smirnoff
2c32df4489 Provide UTF-8 version of russian calendars. 2013-08-16 07:02:17 +00:00
Glen Barber
9ab90e8a58 Mark the makefs(8) '-p' flag as deprecated in preference for
the '-Z' flag for compatibility with NetBSD.

Submitted by:	Eric van Gyzen (via stable@)
MFC after:	3 days
2013-08-16 05:30:13 +00:00
Mark Johnston
196f2f42eb Use strdup(9) instead of reimplementing it. 2013-08-16 03:41:41 +00:00
Peter Grehan
50dc0db3f0 Fix ordering of legacy IRQ reservations.
Submitted by:	Jeremiah Lott   jlott at averesystems dot com
2013-08-16 00:35:20 +00:00
Kenneth D. Merry
ce625ec719 Change the way that unmapped I/O capability is advertised.
The previous method was to set the D_UNMAPPED_IO flag in the cdevsw
for the driver.  The problem with this is that in many cases (e.g.
sa(4)) there may be some instances of the driver that can handle
unmapped I/O and some that can't.  The isp(4) driver can handle
unmapped I/O, but the esp(4) driver currently cannot.  The cdevsw
is shared among all driver instances.

So instead of setting a flag on the cdevsw, set a flag on the cdev.
This allows drivers to indicate support for unmapped I/O on a
per-instance basis.

sys/conf.h:	Remove the D_UNMAPPED_IO cdevsw flag and replace it
		with an SI_UNMAPPED cdev flag.

kern_physio.c:	Look at the cdev SI_UNMAPPED flag to determine
		whether or not a particular driver can handle
		unmapped I/O.

geom_dev.c:	Set the SI_UNMAPPED flag for all GEOM cdevs.
		Since GEOM will create a temporary mapping when
		needed, setting SI_UNMAPPED unconditionally will
		work.

		Remove the D_UNMAPPED_IO flag.

nvme_ns.c:	Set the SI_UNMAPPED flag on cdevs created here
		if NVME_UNMAPPED_BIO_SUPPORT is enabled.

vfs_aio.c:	In aio_qphysio(), check the SI_UNMAPPED flag on a
		cdev instead of the D_UNMAPPED_IO flag on the cdevsw.

sys/param.h:	Bump __FreeBSD_version to 1000045 for the switch from
		setting the D_UNMAPPED_IO flag in the cdevsw to setting
		SI_UNMAPPED in the cdev.

Reviewed by:	kib, jimharris
MFC after:	1 week
Sponsored by:	Spectra Logic
2013-08-15 22:52:39 +00:00
Jilles Tjoelker
f57087b21c sigsuspend(2): Add xrefs to pselect(2) and sigwait-alikes. 2013-08-15 22:33:27 +00:00
Jeff Roberson
114f62c6df - Fix bug in r254304. Use the ACTIVE pq count for the active list
processing, not inactive.  This was the result of a bad merge.

Reported by:	pho
Sponsored by:	EMC / Isilon Storage Division
2013-08-15 22:29:49 +00:00
Jung-uk Kim
5772203b17 Simplify check for CMPXCHG8B instruction. Note CMPXCHG8B instruction is
always available for Rise mP6 processors although it is not set by CPUID.
2013-08-15 21:09:05 +00:00
Colin Percival
2bb93f2d18 Change the queue of locks in kern_rangelock.c from holding lock requests in
the order that they arrive, to holding
(a) granted write lock requests, followed by
(b) granted read lock requests, followed by
(c) ungranted requests, in order of arrival.

This changes the stopping condition for iterating through granted locks to
see if a new request can be granted: When considering a read lock request,
we can stop iterating as soon as we see a read lock request, since anything
after that point is either a granted read lock request or a request which
has not yet been granted.  (For write lock requests, we must still compare
against all granted lock requests.)

For workloads with R parallel reads and W parallel writes, this improves
the time spent from O((R+W)^2) to O(W*(R+W)); i.e., heavy parallel-read
workloads become significantly more scalable.

No statistically significant change in buildworld time has been measured,
but synthetic tests of parallel 'dd > /dev/null' and 'openssl enc >/dev/null'
with the input file cached yield dramatic (up to 10x) improvement with high
(up to 128 processes) levels of parallelism.

Reviewed by:	kib
2013-08-15 20:19:17 +00:00
Jung-uk Kim
bd00cfe2c8 Avoid potential redefinition of the macro. 2013-08-15 20:03:22 +00:00
Edward Tomasz Napierala
da4757e06b Turn comments about locking into actual lock assertions.
Reviewed by:	ken
Tested by:	ken
MFC after:	1 month
2013-08-15 20:00:32 +00:00
Brooks Davis
cd234300d3 Use an ANSI C definition of initializecpucache() to match the declaration
and the rest of the file.
2013-08-15 17:44:44 +00:00
Brooks Davis
cb261f4315 Call set_i8254_freq with MODE_STOP (0) rather than a magic number of 0. 2013-08-15 17:21:06 +00:00
Kenneth D. Merry
7bf825d1d3 Export the maxio field in the CAM XPT_PATH_INQ CCB in the isp(4)
driver.

This tells consumers up the stack the maximum I/O size that the
controller can handle.

The I/O size is bounded by the number of scatter/gather segments
the controller can handle and the page size.  For an amd64 system,
it works out to around 5MB.

Reviewed by:	mjacob
MFC after:	3 days
Sponsored by:	Spectra Logic
2013-08-15 16:41:27 +00:00
Rusmir Dusko
d1c64a6d1d - Add myself in committers-ports.dot
Approved by:	miwi/wxs/wg (mentors)
2013-08-15 16:03:09 +00:00
Attilio Rao
a834cbaec8 On the recovery path for vm_page_alloc(), if a page had been requested
wired, unwind back the wiring bits otherwise we can end up freeing a
page that is considered wired.

Sponsored by:	EMC / Isilon storage division
Reported by:	alc
2013-08-15 11:01:25 +00:00
Jeremie Le Hen
2c7cd47838 Belatedly bump __FreeBSD_version for libc being an ld script.
This should have been done in r251668, on June 12, 2013.

This will have no practical consequences, besides having -lssp_nonshared
appearing twice on the command-line for systems built in this time frame.
2013-08-15 08:21:00 +00:00
Gleb Smirnoff
ca04d21d5f Make sendfile() a method in the struct fileops. Currently only
vnode backed file descriptors have this method implemented.

Reviewed by:	kib
Sponsored by:	Nginx, Inc.
Sponsored by:	Netflix
2013-08-15 07:54:31 +00:00
Mark Johnston
f0e6364ef8 Fix a typo.
MFC after:	3 days
2013-08-15 04:10:15 +00:00
Mark Johnston
7b77e1fe0f Specify SDT probe argument types in the probe definition itself rather than
using SDT_PROBE_ARGTYPE(). This will make it easy to extend the SDT(9) API
to allow probes with dynamically-translated types.

There is no functional change.

MFC after:	2 weeks
2013-08-15 04:08:55 +00:00
Simon J. Gerraty
3d2bc9e872 Some objects - such as *_genassym.o are not hooked into
SRCS OBJS or anything else, yet have a dependency on symlinks
such as machine/

Reviewed by: obrien
2013-08-14 22:19:29 +00:00
Jilles Tjoelker
056fd329b9 sh: Recognize "--" as end of options in local builtin. 2013-08-14 21:59:48 +00:00
Michael Tuexen
0e05fbded9 Don't send uninitialized memory (two instances of 4 bytes) in
every cookie on the wire. This bug was reported in
https://bugzilla.mozilla.org/show_bug.cgi?id=905080

MFC after: 3 days
2013-08-14 21:51:32 +00:00
Rick Macklem
93c5875b24 Fix several performance related issues in the new NFS server's
DRC for NFS over TCP.
- Increase the size of the hash tables.
- Create a separate mutex for each hash list of the TCP hash table.
- Single thread the code that deletes stale cache entries.
- Add a tunable called vfs.nfsd.tcphighwater, which can be increased
  to allow the cache to grow larger, avoiding the overhead of frequent
  scans to delete stale cache entries.
  (The default value will result in frequent scans to delete stale cache
   entries, analagous to what the pre-patched code does.)
- Add a tunable called vfs.nfsd.cachetcp that can be used to disable
  DRC caching for NFS over TCP, since the old NFS server didn't DRC cache TCP.
It also adjusts the size of nfsrc_floodlevel dynamically, so that it is
always greater than vfs.nfsd.tcphighwater.

For UDP the algorithm remains the same as the pre-patched code, but the
tunable vfs.nfsd.udphighwater can be used to allow the cache to grow
larger and reduce the overhead caused by frequent scans for stale entries.
UDP also uses a larger hash table size than the pre-patched code.

Reported by:	wollman
Tested by:	wollman (earlier version of patch)
Submitted by:	ivoras (earlier patch)
Reviewed by:	jhb (earlier version of patch)
MFC after:	1 month
2013-08-14 21:11:26 +00:00
Jilles Tjoelker
adc2e8dfb4 sh: Allow a lone redirection before '|', ';;' or ';&'.
Example: </dev/null | :

PR:		181240
MFC after:	1 week
2013-08-14 19:34:13 +00:00
Sean Bruno
a2bc8a1d0c If sys/param.h MAXPHYS has been tuned to exceed MFI_MAXPHYS, the mfi(4)
real JBOD mode (SYS PD) would fail fairly reliably during I/O.

Steal the mfi_disk.c check for this condition (indirectly) when establishing
d_maxsize.

Reviewed by:	ambrisko@
MFC after:	4 weeks
Sponsored by:	Yahoo! Inc.
2013-08-14 15:50:34 +00:00
Steven Hartland
dce643c85f Added 4K quirks for:-
* OCZ Agility 2 SSDs
* Marvell SSDs
* Intel X25-M Series SSDs
2013-08-14 15:18:28 +00:00
Glen Barber
bda5988364 Remove the {SRC,DOC,PORT}REVISION variables from release(7), and
update the default {SRC,DOC,PORT}BRANCH defaults.

Submitted by:	nwhitehorn
X-MFC-With:	r254224, r254294
X-MFC-To:	stable/9, releng/9.2
2013-08-14 14:45:47 +00:00
David Chisnall
8d9c809950 Make carets line up in dtc diagnostics if the line starts with a tab. 2013-08-14 14:34:02 +00:00
Pedro F. Giffuni
4a62545173 ext2fs: update format specifiers for ext4 type.
Previous bandaid was not appropriate and didn't really work for
all platforms. While here, cleanup the surrounding code to match
ffs_checkoverlap()

Reported by:	dim, jmallet and bde
MFC after:	3 weeks
2013-08-14 14:22:46 +00:00
Ulrich Spörlein
85981e9950 Belatedly add my birthday and fix a typo. 2013-08-14 08:10:54 +00:00
Ulrich Spörlein
f1fe1d39e1 Fix make depend 2013-08-14 08:03:57 +00:00
Rui Paulo
a3e08d6f4c Replace the homegrown implementation of nitems() with calls to nitems()
(param.h).

Operating systems that don't have nitems() can easily define it on their own
net80211 OS-specific header file.

Discussed with:		adrian
2013-08-14 04:24:25 +00:00