that recorded allocated blocks numbers match the physical block
numbers of dandling buffers which are released.
When finally freeing the blocks during unwind, assert that dandling
buffers where not re-allocated. They shouldn't, because the vnode lock
is owned exclusive.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
have SU enabled, there is no point in calling softdep_request_cleanup().
The call cannot produce free blocks, but we unecessarily lock ufsmount
and do inode block write. Usual point of not doing optimizations for
the corner case of the full volume is not applicable there, the work
is easily avoidable, and the addition CPU and disk io load do not lead
to succeeding retry.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
overflow local arrays. This is not immediately obvious from the
static code inspection, due to retry logic.
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
before UFS_BALLOC() is called. I do not believe that this caused any
real issue on FreeBSD because the exclusive vnode lock is held over
the balloc/resize, the change is to make formally correct KPI use.
Based on: the Matthew Dillon' patch from DragonFly BSD
PR: 93942
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
volumes. Treat the field as a semaphore protecting availability of
the device for mounting. Do no access devvp->v_rdev without the vnode
lock owned.
Protect change of the devvp->v_bufobj bo_ops vector with the vnode
lock.
Reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
opened in O_SYNC mode, at least for UFS. This also handles
truncation, done due to the O_SYNC | O_TRUNC flags combination to
open(2), in synchronous way.
Noted by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
remounted to writeable after initial read-only. Assign to
dev->si_mountpt earlier to account the accesses done at the mount
time.
Based on submission by: bde
MFC after: 1 week
rounddown2 tends to produce longer lines than the original code
and when the code has a high indentation level it was not really
advantageous to do the replacement.
This tries to strike a balance between readability using the macros
and flexibility of having the expressions, so not everything is
converted.
for limiting disk (actually filesystem) IO.
Note that in some cases these limits are not quite precise. It's ok,
as long as it's within some reasonable bounds.
Testing - and review of the code, in particular the VFS and VM parts - is
very welcome.
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5080
into per-mount taskqueue with the private taskqueue processing thread.
This allows to drain the taskqueue on unmount, to ensure that all
TRIMs are finished before mount structures are freed.
But just draining the taskqueue where TRIM biodone geom-up completions
are processed is not enough, since ffs_blkfree(), called by the task,
might result in more writes. Count inflight delayed blkfree's and
pause() unmount until the counter drains as well.
Reported by: Nick Evans <nevans@talkpoint.com>
Tested by: Nick Evans <nevans@talkpoint.com>, pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
expects that the loop is always exited with the SU lock owned, even on
error.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
allocated. When shortening the length of a file in which the new end
of the file contains a hole, the hole must have a block allocated.
Reported by: Maxim Sobolev
Reviewed by: kib
Tested by: Peter Holm
crash a server that has exported UFS2 by presenting a filehandle
with an inode number that references an uninitialized inode in a
cylinder group. The problem is that UFS2 only initializes blocks
of inodes as they are first allocated and ffs_fhtovp() does not
validate that the inode is in a range of inodes that have been
initialized. Attempting to read an uninitialized inode gets random
data from the disk. When the kernel tries to interpret it as an
inode, panics often arise.
Reported by: Christos Zoulas (from NetBSD)
Reviewed by: kib
a buffer pointer in the event of an error (for some errors it would
return a buffer pointer and for other errors it would not return a
buffer pointer). The cluster_read() function was similarly inconsistent.
Clients of these functions were inconsistent in handling errors.
Some would assume that no buffer was returned after an error and
would thus lose buffers under certain error conditions. Others would
assume that brelse() should always be called after an error and
would thus panic the system under certain error conditions.
To correct both of these problems with minimal code churn, bread()
and cluster_write() now always free the buffer when returning an
error thus ensuring that buffers will never be lost. The brelse()
routine checks for being passed a NULL buffer pointer and silently
returns to avoid panics. Thus both approaches to handling error
returns from bread() and cluster_read() will work correctly.
Future code should be written assuming that bread() and cluster_read()
will never return a buffer with an error, so should not attempt to
brelse() the buffer when an error is returned.
Reviewed by: kib
ast was rescheduled during VFS_SYNC(). It is possible that enough
parallel writes or slow/hung volume result in VFS_SYNC() deferring to
the ast flushing of workqueue.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Cleanup setting of ctime/mtime/birthtime: do not set IN_ACCESS or
IN_UPDATE, then clear them with ufs_itimes(), making transient
(possibly inconsistent) change to the times, and then copy
user-supplied times into the inode. Instead, directly clear IN_ACCESS
or IN_UPDATE when user supplied the time, and copy the value into the
inode.
Minor inconsistency left is that the inode ctime is updated even when
birthtime update attempt is performed on a UFS1 volume.
Submitted by: bde
MFC after: 2 weeks
the name of a filesystem when setting it as the first parameter to the
getnewvnode() function. Most filesystems call getnewvnode from just one
place so can use a literal string as the first parameter. However, NFS
calls getnewvnode from two places, so we create a global constant string
that can be used by the two instances. This change also collapses two
instances of getnewvnode() in the UFS filesystem to a single call.
Reviewed by: kib
Tested by: Peter Holm
deletions. Ability to do deletions is a strong indication that this
optimization will not help performance. It will only generate extra write
traffic. These devices are typically flash based and have a limited number of
write cycles. In addition, making the file contiguous in LBA space doesn't
improve the access times from flash devices because they have no seek time.
Reviewed by: mckusick@
of the D_NEWBLK kinds of dependencies (i.e. D_ALLOCDIRECT and
D_ALLOCINDIR), which can exhaust kmem.
Handle excess of D_NEWBLK in the same way as excess of D_INODEDEP and
D_DIRREM, by scheduling ast to flush dependencies, after the thread,
which created new dep, left the VFS/FFS innards. For D_NEWBLK, the
only way to get rid of them is to do full sync, since items are
attached to data blocks of arbitrary vnodes. The check for D_NEWBLK
excess in softdep_ast_cleanup_proc() is unlocked.
For 32bit arches, reduce the total amount of allowed dependencies by
two. It could be considered increasing the limit for 64 bit platforms
with direct maps.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
'buf' is inconvenient and has lead me to some irritating to discover
bugs over the years. It also makes it more challenging to refactor
the buf allocation system.
- Move swbuf and declare it as an extern in vfs_bio.c. This is still
not perfect but better than it was before.
- Eliminate the unused ffs function that relied on knowledge of the buf
array.
- Move the shutdown code that iterates over the buf array into vfs_bio.c.
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
- Use pointer assignment rather than a combination of pointers and
flags to switch buffers between unmapped and mapped. This eliminates
multiple flags and generally simplifies the logic.
- Eliminate b_saveaddr since it is only used with pager bufs which have
their b_data re-initialized on each allocation.
- Gather up some convenience routines in the buffer cache for
manipulating buf space and buf malloc space.
- Add an inline, buf_mapped(), to standardize checks around unmapped
buffers.
In collaboration with: mlaier
Reviewed by: kib
Tested by: pho (many small revisions ago)
Sponsored by: EMC / Isilon Storage Division
This obviates the need for a MNTK_SUSPENDABLE flag, since passthrough
filesystems like nullfs and unionfs no longer need to inherit this
information from their lower layer(s). This change also restores the
pre-r273336 behaviour of using the presence of a susp_clean VFS method to
request suspension support.
Reviewed by: kib, mjg
Differential Revision: https://reviews.freebsd.org/D2937
* GENERAL
- Update copyright.
- Make kernel options for RANDOM_YARROW and RANDOM_DUMMY. Set
neither to ON, which means we want Fortuna
- If there is no 'device random' in the kernel, there will be NO
random(4) device in the kernel, and the KERN_ARND sysctl will
return nothing. With RANDOM_DUMMY there will be a random(4) that
always blocks.
- Repair kern.arandom (KERN_ARND sysctl). The old version went
through arc4random(9) and was a bit weird.
- Adjust arc4random stirring a bit - the existing code looks a little
suspect.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Redo read_random(9) so as to duplicate random(4)'s read internals.
This makes it a first-class citizen rather than a hack.
- Move stuff out of locked regions when it does not need to be
there.
- Trim RANDOM_DEBUG printfs. Some are excess to requirement, some
behind boot verbose.
- Use SYSINIT to sequence the startup.
- Fix init/deinit sysctl stuff.
- Make relevant sysctls also tunables.
- Add different harvesting "styles" to allow for different requirements
(direct, queue, fast).
- Add harvesting of FFS atime events. This needs to be checked for
weighing down the FS code.
- Add harvesting of slab allocator events. This needs to be checked for
weighing down the allocator code.
- Fix the random(9) manpage.
- Loadable modules are not present for now. These will be re-engineered
when the dust settles.
- Use macros for locks.
- Fix comments.
* src/share/man/...
- Update the man pages.
* src/etc/...
- The startup/shutdown work is done in D2924.
* src/UPDATING
- Add UPDATING announcement.
* src/sys/dev/random/build.sh
- Add copyright.
- Add libz for unit tests.
* src/sys/dev/random/dummy.c
- Remove; no longer needed. Functionality incorporated into randomdev.*.
* live_entropy_sources.c live_entropy_sources.h
- Remove; content moved.
- move content to randomdev.[ch] and optimise.
* src/sys/dev/random/random_adaptors.c src/sys/dev/random/random_adaptors.h
- Remove; plugability is no longer used. Compile-time algorithm
selection is the way to go.
* src/sys/dev/random/random_harvestq.c src/sys/dev/random/random_harvestq.h
- Add early (re)boot-time randomness caching.
* src/sys/dev/random/randomdev_soft.c src/sys/dev/random/randomdev_soft.h
- Remove; no longer needed.
* src/sys/dev/random/uint128.h
- Provide a fake uint128_t; if a real one ever arrived, we can use
that instead. All that is needed here is N=0, N++, N==0, and some
localised trickery is used to manufacture a 128-bit 0ULLL.
* src/sys/dev/random/unit_test.c src/sys/dev/random/unit_test.h
- Improve unit tests; previously the testing human needed clairvoyance;
now the test will do a basic check of compressibility. Clairvoyant
talent is still a good idea.
- This is still a long way off a proper unit test.
* src/sys/dev/random/fortuna.c src/sys/dev/random/fortuna.h
- Improve messy union to just uint128_t.
- Remove unneeded 'static struct fortuna_start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
* src/sys/dev/random/yarrow.c src/sys/dev/random/yarrow.h
- Improve messy union to just uint128_t.
- Remove unneeded 'staic struct start_cache'.
- Tighten up up arithmetic.
- Provide a method to allow eternal junk to be introduced; harden
it against blatant by compress/hashing.
- Assert that locks are held correctly.
- Fix the nasty pre- and post-read overloading by providing explictit
functions to do these tasks.
- Turn into self-sufficient module (no longer requires randomdev_soft.[ch])
- Fix some magic numbers elsewhere used as FAST and SLOW.
Differential Revision: https://reviews.freebsd.org/D2025
Reviewed by: vsevolod,delphij,rwatson,trasz,jmg
Approved by: so (delphij)
First, on the write error, bufdone() call from ffs_backgroundwrite()
panics because pbrelvp() cleared bp->b_bufobj, while brelse() would
try to re-dirty the copy of the cg buffer. Handle this by setting
B_INVAL for the case of BIO_ERROR.
Second, we must re-dirty the real buffer containing the cylinder group
block data when background write failed. Real cg buffer was already
marked clean in ffs_bufwrite(). After the BV_BKGRDINPROG flag is
cleared on the real cg buffer in ffs_backgroundwrite(), buffer scan
may reuse the buffer at any moment. The result is lost write, and if
the write error was only transient, we get corrupted bitmaps.
We cannot re-dirty the original cg buffer in the
ffs_backgroundwritedone(), since the context is not sleepable,
preventing us from sleeping for origbp' lock. Add BV_BKGDERR flag
(protected by the buffer object lock), which is converted into delayed
write by brelse(), bqrelse() and buffer scan.
In collaboration with: Conrad Meyer <cse.cem@gmail.com>
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation (kib),
EMC/Isilon storage division (Conrad)
MFC after: 2 weeks
the active vnode list for the given mount point, with the assumption
that vnodes with dirty pages are active. This is enforced by
vinactive() doing vm_object_page_clean() pass over the vnode pages.
The issue is, if vinactive() cannot be called during vput() due to the
vnode being only shared-locked, we might end up with the dirty pages
for the vnode on the free list. Such vnode is invisible to syncer,
and pages are only cleaned on the vnode reactivation. In other words,
the race results in the broken guarantee that user data, written
through the mmap(2), is written to the disk not later than in 30
seconds after the write.
Fix this by keeping the vnode which is freed but still owing
inactivation, on the active list. When syncer loops find such vnode,
it is deactivated and cleaned by the final vput() call.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
softdep_sync() similarly to the regular vnode sync. Allow retry for
both vnode types.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
When deallocate_dependencies() is performed,
softdep_journal_freeblocks() already called cancel_allocdirect() which
should have eliminated direct dependencies for all truncated full
blocks. The indirect dependencies are allowed above, since second-
and third-level dependencies are only dealt with by the code which
frees indirect block, which happens after the inode write.
Discussed with: mckusick, jeff
Reviewed by: jeff
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
buildkernel run.
Some of them were write-only under some kernel options, e.g. variables
keeping values only used by CTR() macros. It costs nothing to the
code readability and correctness to eliminate the warnings in those
cases too by removing the local cached values used only for
single-access.
Review: https://reviews.freebsd.org/D2665
Reviewed by: rodrigc
Looked at by: bjk
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Eliminate it, and simplify code by removing the local dflags variable
always initialized to DEPALLOC.
Noted by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
limits in the code which is deep in the call stack, and owns several
critical system resources, like vnode locks. Attempt to wait while
the per-mount softupdate thread cleans up the backlog may deadlock,
because the thread might need to lock the same vnode which is owned by
the waiting thread.
Instead of synchronously waiting for the worker, perform the worker'
tickle and pause until the backlog is cleaned, at the safe point
during return from kernel to usermode. A new ast request to call
softdep_ast_cleanup() is created, the SU code now only checks the size
of queue and schedules ast.
There is no ast delivery for the kernel threads, so they are exempted
from the mechanism, except NFS daemon threads. NFS server loop
explicitely checks for the request, and informs the schedule_cleanup()
that it is capable of handling the requests by the process P2_AST_SU
flag. This is needed because nfsd may be the sole cause of the SU
workqueue overflow. But, to not cause nsfd to spawn additional
threads just because we slow down existing workers, only tickle su
threads, without waiting for the backlog cleanup.
Reviewed by: jhb, mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
trying to build a cluster. The limit is tunable using the sysctl
vfs.ffs.maxclustersearch. The current limit is 10 cylinder groups
per block allocation. It was previously limited to the number of
cylinder groups in the filesystem per block allocation. When there
were no clusters of the needed size left, it repeatedly searched
the whole filesystem for a non-existent cluster on every block
allocation. The result was very slow filesystem allocation with
100% CPU utilization. The old behavior can be had by setting
vfs.ffs.maxclustersearch to a huge number (1,000,000).
This change affects only the layout policy routines so is not able
to interfere with the integrity of the filesystem.
Reported by: Dmitry Sivachenko (demon@)
Tested by: Dmitry Sivachenko (demon@)
MFC after: 2 weeks
use VOP_FSYNC() to perform the NFS server's Commit operation.
This patch adds a mnt_kern_flag called MNTK_USES_BCACHE which
is set by file systems that use the buffer cache. If this flag
is not set, the NFS server always does a VOP_FSYNC().
This should be ok for old file system modules that do not set
MNTK_USES_BCACHE, since calling VOP_FSYNC() is correct, although
it might not be optimal for file systems that use the buffer cache.
Reviewed by: kib
MFC after: 2 weeks
sequence is performed on UFS SU+J rootfs:
cp -Rp /sbin/init /sbin/init.old
mv -f /sbin/init.old /sbin/init
Hang occurs on the rootfs unmount. There are two issues:
1. Removed init binary, which is still mapped, creates a reference to
the removed vnode. The inodeblock for such vnode must have active
inodedep, which is (eventually) linked through the unlinked list. This
means that ffs_sync(MNT_SUSPEND) cannot succeed, because number of
softdep workitems for the mp is always > 0. FFS is suspended during
unmount, so unmount just hangs.
2. As noted above, the inodedep is linked eventually. It is not
linked until the superblock is written. But at the vfs_unmountall()
time, when the rootfs is unmounted, the call is made to
ffs_unmount()->ffs_sync() before vflush(), and ffs_sync() only calls
ffs_sbupdate() after all workitems are flushed. It is masked for
normal system operations, because syncer works in parallel and
eventually flushes superblock. Syncer is stopped when rootfs
unmounted, so ffs_sync() must do sb update on its own.
Correct the issues listed above. For MNT_SUSPEND, count the number of
linked unlinked inodedeps (this is not a typo) and substract the count
of such workitems from the total. For the second issue, the
ffs_sbupdate() is called right after device sync in ffs_sync() loop.
There is third problem, occuring with both SU and SU+J. The
softdep_waitidle() loop, which waits for softdep_flush() thread to
clear the worklist, only waits 20ms max. It seems that the 1 tick,
specified for msleep(9), was a typo.
Add fsync(devvp, MNT_WAIT) call to softdep_waitidle(), which seems to
significantly help the softdep thread, and change the MNT_LAZY update
at the reboot time to MNT_WAIT for similar reasons. Note that
userspace cannot create more work while devvp is flushed, since the
mount point is always suspended before the call to softdep_waitidle()
in unmount or remount path.
PR: 195458
In collaboration with: gjb, pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
instead of waiting for the FLUSH_* flags. Also, when requesting
flush, do the wakeups unconditionally even when FLUSH_CLEANUP flag was
already set.
Reported and tested by: dim,
"Lundberg, Johannes" <johannes@brilliantservice.co.jp>
Bisected by: dim
MFC after: 2 weeks
thread started and incremented the stat_flush_threads [1].
Unconditionally wakeup softdep_flush threads when needed, do not try
to check wchan, which is racy and breaks abstraction.
Reported by and discussed with: glebius, neel
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
into namecache, to avoid cache trashing when doing large operations.
E.g., tar archive extraction is not usually followed by access to many
of the files created.
Right now, each VOP_LOOKUP() implementation explicitely knowns about
this quirk and tests for both MAKEENTRY flag presence and op != CREATE
to make the call to cache_enter(). Centralize the handling of the
quirk into VFS, by deciding to cache only by MAKEENTRY flag in VOP.
VFS now sets NOCACHE flag for CREATE namei() calls.
Note that the change in semantic is backward-compatible and could be
merged to the stable branch, and is compatible with non-changed
third-party filesystems which correctly handle MAKEENTRY.
Suggested by: Chris Torek <torek@pi-coral.com>
Reviewed by: mckusick
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
o Provide a new VOP_GETPAGES_ASYNC(), which works like VOP_GETPAGES(), but
doesn't sleep. It returns immediately, and will execute the I/O done handler
function that must be supplied as argument.
o Provide VOP_GETPAGES_ASYNC() for the FFS, which uses vnode_pager.
o Extend pagertab to support pgo_getpages_async method, and implement this
method for vnode_pager.
Reviewed by: kib
Tested by: pho
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
rename it to ufs_dirhashreclaimpercent, as suggested
by jhb@. As an added bonus this avoids divide-by-zero
errors.
Requested by: jhb, markj
Reviewied by: jhb, markj
are not suspended. In particular, on the SU-enabled vulumes, there is
no reason why, between the call to softdep_flushfiles() and
softdep_waitidle(), SU work items cannot be queued.
Correct the condition to trigger the panic by only checking when
forced operation is done. Convert direct panic() call into KASSERT(),
there is no invalid on-disk data structures directly involved, so
follow the usual debugging vs. non-debugging approach.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
two.
nullfs and unionfs need to request suspension if underlying filesystem(s)
use it. Utilize mnt_kern_flag for this purpose.
This is a fixup for 273271.
No strong objections from: kib
Pointy hat to: mjg
MFC after: 2 weeks
survives remount in rw, also it is set for vnodes on rootfs before
noatime can be set or clock is adjusted. All conditions result in
wrong atime for accessed vnodes.
Submitted by: bde
MFC after: 1 week
by ffs and ext2fs. Remove duplicated call to vm_page_zero_invalid(),
done by VOP and by vm_pager_getpages(). Use vm_pager_free_nonreq().
Reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 6 weeks (after r271596)
conflict with the quota metadata access. Mark quota vnode lock as
recursive and always exclusive to avoid the problem.
Reported by: hrs
Tested by: hrs, pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
for dirhash cache, setting a target percent to reclaim (exposed via
SYSCTL). This allows to always make some amount of progress keeping the maximum
reclaim age dynamic.
Tested by: pho
Reviewed by: jhb
kern_renameat() already starts write on the mp, which prevents
parallel unmount from proceed. Busying mp after vn_start_write()
deadlocks the unmount.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
unmount. There is no need to suspend read-only filesystem, while we
need suspension on modificable mount point.
Reported by: rwatson
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
r269533, which was tested before r269457 was committed, implicitely
relied on the Giant to protect the manipulations of the softdepmounts
list. Use softdep global lock consistently to guarantee the list
structure now.
Insert the new struct mount_softdeps into the softdepmounts only after
it is sufficiently initialized, to prevent softdep_speedup() from
accessing bare memory. Similarly, remove struct mount_softdeps for
the unmounted filesystem from the tailq before destroying structure
rwlock.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
have to adjust freeblk records to reflect the change to a full-size block.
For example, suppose we have a block made up of fragments 8-15 and
want to free its last two fragments. We are given a request that says:
FREEBLK ino=5, blkno=14, lbn=0, frags=2, oldfrags=0
where frags are the number of fragments to free and oldfrags are the
number of fragments to keep. To block align it, we have to change it to
have a valid full-size blkno, so it becomes:
FREEBLK ino=5, blkno=8, lbn=0, frags=2, oldfrags=6
Submitted by: Mikihito Takehara
Tested by: Mikihito Takehara
Reviewed by: Jeff Roberson
MFC after: 1 week
Replace a single soft updates thread with a thread per FFS-filesystem
mount point. The threads are associated with the bufdaemon process.
Reviewed by: kib
Tested by: Peter Holm and Scott Long
MFC after: 2 weeks
Sponsored by: Netflix
forcing filesystem VOP_LINK() methods to repeat the code. In
tmpfs_link(), remove redundand check for the type of the source,
already done by VFS.
Note that NFS server already performs this check before calling
VOP_LINK().
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
unmount time) in the helper vfs_write_suspend_umnt(). Use it instead
of two inline copies in FFS.
Fix the bug in the FFS unmount, when suspension failed, the ufs
extattrs were not reinitialized.
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
permissions test, forgotten in r164033.
Refactor the permission checks for utimes(2) into vnode helper
function vn_utimes_perm(9), and simplify its code comparing with the
UFS origin, by writing the call to VOP_ACCESSX only once. Use the
helper for UFS(5), tmpfs(5), devfs(5) and msdosfs(5).
Reported by: bde
Reviewed by: bde, trasz
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
using a direct hook called from kern_vfs_bio_buffer_alloc().
Mark ffs_rawread.c as requiring both ffs and directio options to be
compiled into the kernel. Add ffs_rawread.c to the list of ufs.ko
module' sources.
In addition to stopping breaking the layering violation, it also
allows to link kernel when FFS is configured as module and DIRECTIO is
enabled.
One consequence of the change is that ffs_rawread.o is always linked
into the module regardless of the DIRECTIO option. This is similar to
the option QUOTA and ufs_quota.c.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
If you had a UFS2 FS that didn't have it's super block at SBLOCK_UFS2,
you'll end up corrupting your FS as the superblock is updated and written
to a different location...
makefs used to put the superblock at SBLOCK_UFS1 for UFS 2 FS's causing
this issue...
Reviewed by: silience from mckusick
MFC after: 1 week
a journal block even when there are no journal entries to be written.
Until the root cause is found, handle this case by ensuring that a
valid journal segment is always written.
Second, the data buffer used for writing journal entries was never
being scrubbed of old data. Fix this.
Submitted by: Takehara Mikihito
Obtained from: Netflix, Inc.
MFC after: 3 days
further refinement is required as some device drivers intended to be
portable over FreeBSD versions rely on __FreeBSD_version to decide whether
to include capability.h.
MFC after: 3 weeks
waiting sync pass we need to do a blocking acquire and restart.
Another thread, typically the buf daemon, may have this buf locked and
if we don't wait we can fail to sync the file. This lead to a great
variety of softdep panics because we rely on all dependencies being
flushed before proceeding in several cases.
Reported by: pho
Discussed with: mckusick
Sponsored by: EMC / Isilon Storage Division
MFC after: 2 weeks
This could cause dirhash panics since the dirhash state would be
successfully truncated while the directory was not.
Reported by: pho
Discussed with: mckusick
Sponsored by: EMC / Isilon Storage Division
MFC after: 2 weeks
We had previously tried to flush all MKDIR_PARENT dependencies (and
all the NEWBLOCK pagedeps) by calling ffs_update(). However this will
only resolve these dependencies in direct blocks. So very large
directories with MKDIR_PARENT dependencies in indirect blocks had
not yet gotten flushed. As the directory is in the midst of doing a
complete sync, we simply defer the checking of the MKDIR_PARENT
dependencies until the indirect blocks have been sync'ed.
Reported by: Shawn Wallbridge of imaginaryforces.com
Tested by: John-Mark Gurney <jmg@funkthat.com>
PR: 183424
MFC after: 2 weeks
di_extsize is the EA size and as such it should be unsigned.
Adjust related types for consistency.
Reviewed by: mckusick (previous version)
MFC after: 3 weeks
single kernel-wide soft update lock can be replaced with a
per-filesystem soft-updates lock. This per-filesystem lock will
allow each filesystem to have its own soft-updates flushing thread
rather than being limited to a single soft-updates flushing thread
for the entire kernel.
Move soft update variables out of the ufsmount structure and into
their own mount_softdeps structure referenced by ufsmount field
um_softdep. Eventually the per-filesystem lock will be in this
structure. For now there is simply a pointer to the kernel-wide
soft updates lock.
Change all instances of ACQUIRE_LOCK and FREE_LOCK to pass the lock
pointer in the mount_softdeps structure instead of a pointer to the
kernel-wide soft-updates lock.
Replace the five hash tables used by soft updates with per-filesystem
copies of these tables allocated in the mount_softdeps structure.
Several functions that flush dependencies when too many are allocated
in the kernel used to operate across all filesystems. They are now
parameterized to flush dependencies from a specified filesystem.
For now, we stick with the round-robin flushing strategy when the
kernel as a whole has too many dependencies allocated.
While there are many lines of changes, there should be no functional
change in the operation of soft updates.
Tested by: Peter Holm and Scott Long
Sponsored by: Netflix
Add KASSERTS that soft dependency functions only get called
for filesystems running with soft dependencies. Calling these
functions when soft updates are not compiled into the system
become panic's.
No functional change.
Tested by: Peter Holm and Scott Long
Sponsored by: Netflix
Ensure that softdep_unmount() and softdep_setup_sbupdate()
only get called for filesystems running with soft dependencies.
No functional change.
Tested by: Peter Holm and Scott Long
Sponsored by: Netflix
Convert three functions exported from ffs_softdep.c to static
functions as they are not used outside of ffs_softdep.c.
No functional change.
Tested by: Peter Holm and Scott Long
Sponsored by: Netflix
Most of the code between UFS1 and UFS2 is shared so this change
is pretty safe. Not only this makes UFS1 and 2 consistent but it
also matches what NetBSD and MacOS X have for some years now.
Reviewed by: mckusick
MFC after: 1 month
in the future in a backward compatible (API and ABI) way.
The cap_rights_t represents capability rights. We used to use one bit to
represent one right, but we are running out of spare bits. Currently the new
structure provides place for 114 rights (so 50 more than the previous
cap_rights_t), but it is possible to grow the structure to hold at least 285
rights, although we can make it even larger if 285 rights won't be enough.
The structure definition looks like this:
struct cap_rights {
uint64_t cr_rights[CAP_RIGHTS_VERSION + 2];
};
The initial CAP_RIGHTS_VERSION is 0.
The top two bits in the first element of the cr_rights[] array contain total
number of elements in the array - 2. This means if those two bits are equal to
0, we have 2 array elements.
The top two bits in all remaining array elements should be 0.
The next five bits in all array elements contain array index. Only one bit is
used and bit position in this five-bits range defines array index. This means
there can be at most five array elements in the future.
To define new right the CAPRIGHT() macro must be used. The macro takes two
arguments - an array index and a bit to set, eg.
#define CAP_PDKILL CAPRIGHT(1, 0x0000000000000800ULL)
We still support aliases that combine few rights, but the rights have to belong
to the same array element, eg:
#define CAP_LOOKUP CAPRIGHT(0, 0x0000000000000400ULL)
#define CAP_FCHMOD CAPRIGHT(0, 0x0000000000002000ULL)
#define CAP_FCHMODAT (CAP_FCHMOD | CAP_LOOKUP)
There is new API to manage the new cap_rights_t structure:
cap_rights_t *cap_rights_init(cap_rights_t *rights, ...);
void cap_rights_set(cap_rights_t *rights, ...);
void cap_rights_clear(cap_rights_t *rights, ...);
bool cap_rights_is_set(const cap_rights_t *rights, ...);
bool cap_rights_is_valid(const cap_rights_t *rights);
void cap_rights_merge(cap_rights_t *dst, const cap_rights_t *src);
void cap_rights_remove(cap_rights_t *dst, const cap_rights_t *src);
bool cap_rights_contains(const cap_rights_t *big, const cap_rights_t *little);
Capability rights to the cap_rights_init(), cap_rights_set(),
cap_rights_clear() and cap_rights_is_set() functions are provided by
separating them with commas, eg:
cap_rights_t rights;
cap_rights_init(&rights, CAP_READ, CAP_WRITE, CAP_FSTAT);
There is no need to terminate the list of rights, as those functions are
actually macros that take care of the termination, eg:
#define cap_rights_set(rights, ...) \
__cap_rights_set((rights), __VA_ARGS__, 0ULL)
void __cap_rights_set(cap_rights_t *rights, ...);
Thanks to using one bit as an array index we can assert in those functions that
there are no two rights belonging to different array elements provided
together. For example this is illegal and will be detected, because CAP_LOOKUP
belongs to element 0 and CAP_PDKILL to element 1:
cap_rights_init(&rights, CAP_LOOKUP | CAP_PDKILL);
Providing several rights that belongs to the same array's element this way is
correct, but is not advised. It should only be used for aliases definition.
This commit also breaks compatibility with some existing Capsicum system calls,
but I see no other way to do that. This should be fine as Capsicum is still
experimental and this change is not going to 9.x.
Sponsored by: The FreeBSD Foundation
allocations under low free-space conditions (-r254995), determine
that old block-preference search order used before -r249782 worked
a bit better. This change reverts to that block-preference search order.
MFC after: 2 weeks
I have 25TB Dell PERC 6 RAID5 array. When it becomes almost
full (10-20GB free), processes which write data to it start
eating 100% CPU and write speed drops below 1MB/sec (normally
to gives 400MB/sec). The revision at which it first became
apparent was http://svnweb.freebsd.org/changeset/base/249782.
The offending change reserved an area in each cylinder group to
store metadata. The new algorithm attempts to save this area for
metadata and allows its use for non-metadata only after all the
data areas have been exhausted. The size of the reserved area
defaults to half of minfree, so the filesystem reports full before
the data area can completely fill. However, in this report, the
filesystem has had minfree reduced to 1% thus forcing the metadata
area to be used for data. As the filesystem approached full, it
had only metadata areas left to allocate. The result was that
every block allocation had to scan summary data for 30,000 cylinder
groups before falling back to searching up to 30,000 metadata areas.
The fix is to give up on saving the metadata areas once the free
space reserve drops below 2%. The effect of this change is to use
the old algorithm of just accepting the first available block that
we find. Since most filesystems use the default 5% minfree, this
will have no effect on their operation. For those that want to push
to the limit, they will get their crappy block placements quickly.
Submitted by: Dmitry Sivachenko
Fix Tested by: Dmitry Sivachenko
PR: kern/181226
MFC after: 2 weeks
and CIFS file attributes as BSD stat(2) flags.
This work is intended to be compatible with ZFS, the Solaris CIFS
server's interaction with ZFS, somewhat compatible with MacOS X,
and of course compatible with Windows.
The Windows attributes that are implemented were chosen based on
the attributes that ZFS already supports.
The summary of the flags is as follows:
UF_SYSTEM: Command line name: "system" or "usystem"
ZFS name: XAT_SYSTEM, ZFS_SYSTEM
Windows: FILE_ATTRIBUTE_SYSTEM
This flag means that the file is used by the
operating system. FreeBSD does not enforce any
special handling when this flag is set.
UF_SPARSE: Command line name: "sparse" or "usparse"
ZFS name: XAT_SPARSE, ZFS_SPARSE
Windows: FILE_ATTRIBUTE_SPARSE_FILE
This flag means that the file is sparse. Although
ZFS may modify this in some situations, there is
not generally any special handling for this flag.
UF_OFFLINE: Command line name: "offline" or "uoffline"
ZFS name: XAT_OFFLINE, ZFS_OFFLINE
Windows: FILE_ATTRIBUTE_OFFLINE
This flag means that the file has been moved to
offline storage. FreeBSD does not have any special
handling for this flag.
UF_REPARSE: Command line name: "reparse" or "ureparse"
ZFS name: XAT_REPARSE, ZFS_REPARSE
Windows: FILE_ATTRIBUTE_REPARSE_POINT
This flag means that the file is a Windows reparse
point. ZFS has special handling code for reparse
points, but we don't currently have the other
supporting infrastructure for them.
UF_HIDDEN: Command line name: "hidden" or "uhidden"
ZFS name: XAT_HIDDEN, ZFS_HIDDEN
Windows: FILE_ATTRIBUTE_HIDDEN
This flag means that the file may be excluded from
a directory listing if the application honors it.
FreeBSD has no special handling for this flag.
The name and bit definition for UF_HIDDEN are
identical to the definition in MacOS X.
UF_READONLY: Command line name: "urdonly", "rdonly", "readonly"
ZFS name: XAT_READONLY, ZFS_READONLY
Windows: FILE_ATTRIBUTE_READONLY
This flag means that the file may not written or
appended, but its attributes may be changed.
ZFS currently enforces this flag, but Illumos
developers have discussed disabling enforcement.
The behavior of this flag is different than MacOS X.
MacOS X uses UF_IMMUTABLE to represent the DOS
readonly permission, but that flag has a stronger
meaning than the semantics of DOS readonly permissions.
UF_ARCHIVE: Command line name: "uarch", "uarchive"
ZFS_NAME: XAT_ARCHIVE, ZFS_ARCHIVE
Windows name: FILE_ATTRIBUTE_ARCHIVE
The UF_ARCHIVED flag means that the file has changed and
needs to be archived. The meaning is same as
the Windows FILE_ATTRIBUTE_ARCHIVE attribute, and
the ZFS XAT_ARCHIVE and ZFS_ARCHIVE attribute.
msdosfs and ZFS have special handling for this flag.
i.e. they will set it when the file changes.
sys/param.h: Bump __FreeBSD_version to 1000047 for the
addition of new stat(2) flags.
chflags.1: Document the new command line flag names
(e.g. "system", "hidden") available to the
user.
ls.1: Reference chflags(1) for a list of file flags
and their meanings.
strtofflags.c: Implement the mapping between the new
command line flag names and new stat(2)
flags.
chflags.2: Document all of the new stat(2) flags, and
explain the intended behavior in a little
more detail. Explain how they map to
Windows file attributes.
Different filesystems behave differently
with respect to flags, so warn the
application developer to take care when
using them.
zfs_vnops.c: Add support for getting and setting the
UF_ARCHIVE, UF_READONLY, UF_SYSTEM, UF_HIDDEN,
UF_REPARSE, UF_OFFLINE, and UF_SPARSE flags.
All of these flags are implemented using
attributes that ZFS already supports, so
the on-disk format has not changed.
ZFS currently doesn't allow setting the
UF_REPARSE flag, and we don't really have
the other infrastructure to support reparse
points.
msdosfs_denode.c,
msdosfs_vnops.c: Add support for getting and setting
UF_HIDDEN, UF_SYSTEM and UF_READONLY
in MSDOSFS.
It supported SF_ARCHIVED, but this has been
changed to be UF_ARCHIVE, which has the same
semantics as the DOS archive attribute instead
of inverse semantics like SF_ARCHIVED.
After discussion with Bruce Evans, change
several things in the msdosfs behavior:
Use UF_READONLY to indicate whether a file
is writeable instead of file permissions, but
don't actually enforce it.
Refuse to change attributes on the root
directory, because it is special in FAT
filesystems, but allow most other attribute
changes on directories.
Don't set the archive attribute on a directory
when its modification time is updated.
Windows and DOS don't set the archive attribute
in that scenario, so we are now bug-for-bug
compatible.
smbfs_node.c,
smbfs_vnops.c: Add support for UF_HIDDEN, UF_SYSTEM,
UF_READONLY and UF_ARCHIVE in SMBFS.
This is similar to changes that Apple has
made in their version of SMBFS (as of
smb-583.8, posted on opensource.apple.com),
but not quite the same.
We map SMB_FA_READONLY to UF_READONLY,
because UF_READONLY is intended to match
the semantics of the DOS readonly flag.
The MacOS X code maps both UF_IMMUTABLE
and SF_IMMUTABLE to SMB_FA_READONLY, but
the immutable flags have stronger meaning
than the DOS readonly bit.
stat.h: Add definitions for UF_SYSTEM, UF_SPARSE,
UF_OFFLINE, UF_REPARSE, UF_ARCHIVE, UF_READONLY
and UF_HIDDEN.
The definition of UF_HIDDEN is the same as
the MacOS X definition.
Add commented-out definitions of
UF_COMPRESSED and UF_TRACKED. They are
defined in MacOS X (as of 10.8.2), but we
do not implement them (yet).
ufs_vnops.c: Add support for getting and setting
UF_ARCHIVE, UF_HIDDEN, UF_OFFLINE, UF_READONLY,
UF_REPARSE, UF_SPARSE, and UF_SYSTEM in UFS.
Alphabetize the flags that are supported.
These new flags are only stored, UFS does
not take any action if the flag is set.
Sponsored by: Spectra Logic
Reviewed by: bde (earlier version)
collision between a rename and an open system call for the same
target file. Here, rename releases its vnode references, waits for
the open to finish, and then restarts by reacquiring its needed
vnode locks. In this case, rename was unlocking but failing to
release its reference to one of its held vnodes. The effect was
that even after all the actual references to the vnode had gone,
the vnode still showed active references. For files that had been
removed, their space was not reclaimed until the filesystem was
forcibly unmounted.
This bug manifested itself in the Postgres server which would
leak/lose hundreds of files per day amounting to many gigabytes of
disk space. This bug required shutting down Postgres, forcibly
unmounting its filesystem, remounting its filesystem and restarting
Postgres every few days to recover the lost space.
Reported by: Dan Thomas and Palle Girgensohn
Bug-fix by: kib
Tested by: Dan Thomas and Palle Girgensohn
MFC after: 2 weeks
persist much longer than previously. Historically we had at most 100
entries; now the count may reach a million. With the increased count
we spent far too much time looking them up in the grossly undersized
newblk hash table. Configure the newblk hash table to accurately reflect
the number of entries that it must index.
Reviewed by: kib
Tested by: Peter Holm
MFC after: 2 weeks
we need to collect the highest level of allocation for each of the
different soft update dependency structures. This change collects these
statistics and makes them available using `sysctl debug.softdep.highuse'.
Reviewed by: kib
Tested by: Peter Holm
MFC after: 2 weeks
block copy, when copying the superblock into the snapshot. UFS1 does
not align superblock on the block boundary, and bcopy runs off the end
of the buffer.
Reported by: Andre Albsmeier <Andre.Albsmeier@siemens.com>
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
vfs_busy(mp);
vfs_write_suspend(mp);
which are problematic if other thread starts unmount between two
calls. The unmount starts a write, while vfs_write_suspend() drain
writers. On the other hand, unmount drains busy references, causing
the deadlock.
Add a flag argument to vfs_write_suspend and require the callers of it
to specify VS_SKIP_UNMOUNT flag, when the call is performed not in the
mount path, i.e. the covered vnode is not locked. The suspension is
not attempted if VS_SKIP_UNMOUNT is specified and unmount is in
progress.
Reported and tested by: Andreas Longwitz <longwitz@incore.de>
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Revert the simplification of the i_gen calculation.
It is still a good idea to avoid zero values and for the case
of old filesystems there is probably no advantage in using
the complete 32 bits anyways.
Discussed with: bde
MFC after: 4 weeks
Further simplify the i_gen calculation for older disks.
Having a zero here is not really a problem and this is more
similar to what is done in newfs_random().
Reported by: Xin Li
MFC after: 4 weeks
defined by <sys/dirent.h>
Always start parsing at DIRBLKSIZ aligned offset, skip first entries if
uio_offset is not DIRBLKSIZ aligned. Return EINVAL if buffer is too
small for single entry.
Preallocate buffer for cookies. Cookies will be replaced with d_off
field in struct dirent at later point.
Skip entries with zero inode number.
Stop mangling dirent in ufs_extattr_iterate_directory().
Reviewed by: kib
Sponsored by: Google Summer Of Code 2011
In UFS, i_gen is a random generated value and there is not way for
it to be negative. Actually, the value of i_gen is just used to
match bit patterns and it is of not consequence if the values are
signed or not.
Following other filesystems, set it to unsigned and use it as such,
Discussed by: mckusick
Reviewed by: mckusick (previous version)
MFC after: 4 weeks
- Use a shared bufobj lock in getblk() and inmem().
- Convert softdep's lk to rwlock to match the bufobj lock.
- Move INFREECNT to b_flags and protect it with the buf lock.
- Remove unnecessary locking around bremfree() and BKGRDINPROG.
Sponsored by: EMC / Isilon Storage Division
Discussed with: mckusick, kib, mdf
an error. One could argue that returning a buffer even when it is
not valid is incorrect, but bread has always returned a buffer
valid or not.
Reviewed by: kib
MFC after: 2 weeks
the return value is NULL. Based on the returned flags, the
return value should never be inspected in the case where NULL
is returned, but it is good coding practice not to return a
pointer to freed memory.
Found by: Coverity Scan, CID 1006096
Reviewed by: kib
MFC after: 2 weeks
- Don't insert BKGRDMARKER bufs into the splay or dirty/clean buf lists.
No consumers need to find them there and it complicates the tree.
These flags are all FFS specific and could be moved out of the buf
cache.
- Use pbgetvp() and pbrelvp() to associate the background and journal
bufs with the vp. Not only is this much cheaper it makes more sense
for these transient bufs.
- Fix the assertions in pbget* and pbrel*. It's not safe to check list
pointers which were never initialized. Use the BX flags instead. We
also check B_PAGING in reassignbuf() so this should cover all cases.
Discussed with: kib, mckusick, attilio
Sponsored by: EMC / Isilon Storage Division
in the pagedep and inodedep hash tables. An entry in the table is
skipped because 'pagedep_hash' and 'inodedep_hash' hold the size
of the hash tables - 1.
The chance that this would have any operational failure is extremely
unlikely. These funtions only need to find a single entry and are
only called when there are too many entries. The chance that they
would fail because all the entries are on the single skipped hash
chain are remote.
Submitted by: Pedro Martelletto
Reviewed by: kib
MFC after: 2 weeks
running time for a full fsck. It also reduces the random access time
for large files and speeds the traversal time for directory tree walks.
The key idea is to reserve a small area in each cylinder group
immediately following the inode blocks for the use of metadata,
specifically indirect blocks and directory contents. The new policy
is to preferentially place metadata in the metadata area and
everything else in the blocks that follow the metadata area.
The size of this area can be set when creating a filesystem using
newfs(8) or changed in an existing filesystem using tunefs(8).
Both utilities use the `-k held-for-metadata-blocks' option to
specify the amount of space to be held for metadata blocks in each
cylinder group. By default, newfs(8) sets this area to half of
minfree (typically 4% of the data area).
This work was inspired by a paper presented at Usenix's FAST '13:
www.usenix.org/conference/fast13/ffsck-fast-file-system-checker
Details of this implementation appears in the April 2013 of ;login:
www.usenix.org/publications/login/april-2013-volume-38-number-2.
A copy of the April 2013 ;login: paper can also be downloaded
from: www.mckusick.com/publications/faster_fsck.pdf.
Reviewed by: kib
Tested by: Peter Holm
MFC after: 4 weeks
we need to call ufs_checkpath() to walk from our new location to
the root of the filesystem to ensure that we do not encounter
ourselves along the way. Until now, we accomplished this by reading
the ".." entries of each directory in our path until we reached
the root (or encountered an error). This change tries to avoid the
I/O of reading the ".." entries by first looking them up in the
name cache and only doing the I/O when the name cache lookup fails.
Reviewed by: kib
Tested by: Peter Holm
MFC after: 4 weeks
cluster_write() and cluster_wbuild() functions. The flags to be
allowed are a subset of the GB_* flags for getblk().
Sponsored by: The FreeBSD Foundation
Tested by: pho
* VM_OBJECT_LOCK and VM_OBJECT_UNLOCK are mapped to write operations
* VM_OBJECT_SLEEP() is introduced as a general purpose primitve to
get a sleep operation using a VM_OBJECT_LOCK() as protection
* The approach must bear with vm_pager.h namespace pollution so many
files require including directly rwlock.h
When a cylinder group runs short of inodes, a new block for inodes is
allocated, zero'ed, and written to the disk. The zero'ed inodes must
be on the disk before the cylinder group can be updated to claim them.
If the cylinder group claiming the new inodes were written before the
zero'ed block of inodes, the system could crash with the filesystem in
an unrecoverable state.
Rather than adding a soft updates dependency to ensure that the new
inode block is written before it is claimed by the cylinder group
map, we just do a barrier write of the zero'ed inode block to ensure
that it will get written before the updated cylinder group map can
be written. This change should only slow down bulk loading of newly
created filesystems since that is the primary time that new inode
blocks need to be created.
Reported by: Robert Watson
Reviewed by: kib
Tested by: Peter Holm
function, implementing the sysctl vfs.ffs.set_bufoutput (not used in
the tree yet).
- The current directory vnode dereference is unsafe since fd_cdir
could be changed and unreferenced, lock the filedesc around and vref
the fd_cdir.
- The VTOI() conversion of the fd_cdir is unsafe without first
checking that the vnode is indeed from an FFS mount, otherwise
the code dereferences a random memory.
- The cdir could be reclaimed from under us, lock it around the
checks.
- The type of the fp vnode might be not a disk, or it might have
changed while the thread was in flight, check the type.
Reviewed and tested by: mckusick
MFC after: 2 weeks
has gone below zero after the blocks in its inode are freed is a
no-op which the compiler fails to warn about because of the use of
the DIP macro. Change the sanity check to compare the number of
blocks being freed against the value i_blocks. If the number of
blocks being freed exceeds i_blocks, just set i_blocks to zero.
Reported by: Pedro Giffuni (pfg@)
MFC after: 2 weeks
mount, which means that is must not be called while the snaplock is
owned. The vfs_write_resume(9) does call the function as the
VFS_SUSP_CLEAN() method, which is too early and falls into the region
still protected by snaplock.
Add yet another flag for the vfs_write_resume_flags() to avoid calling
suspension cleanup handler after the suspend is lifted, and use it in
the ffs_snapshot() call to vfs_write_resume.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
the write start, by adding a variation of the vfs_write_resume(9)
which accepts flags.
Use the new function to prevent a deadlock between parallel suspension
and snapshotting a UFS mount. The ffs_snapshot() code performed
vfs_write_resume() followed by vn_start_write() while owning the
snaplock. If the suspension intervene between resume and
vn_start_write(), the deadlock occured after the suspending thread
tried to lock the snaplock, most typically during the write in the
ffs_copyonwrite().
Reported and tested by: Andreas Longwitz <longwitz@incore.de>
Reviewed by: mckusick
MFC after: 2 weeks
X-MFC-note: make the vfs_write_resume(9) function a macro after the MFC,
in HEAD
When kern_yield() was introduced with the possibility to specify
a new priority, the behaviour changed by not lowering priority at all
in the consumers, making the yielding mechanism highly ineffective for
high priority kthreads like bufdaemon, syncer, vlrudaemon, etc.
There are no evidences that consumers could bear with such change in
semantic and this situation could finally lead to bugs similar to the
ones fixed in r244240.
Re-specify userland pri for kthreads involved.
Tested by: pho
Reviewed by: kib, mdf
MFC after: 1 week
received granular locking) but the comment present in UFS has been
copied all over other filesystems code incorrectly for several times.
Removes comments that makes no sense now.
Reviewed by: kib
MFC after: 3 days
crash. When truncating a file that never made it to disk we use the
canceled allocation dependencies to hold the journal records until
the truncation completes. Previously allocdirect dependencies on
the id_bufwait list were not considered and their journal space
could expire before the bitmaps were written. Cancel them and attach
them to the freeblks as we do for other allocdirects.
- Add KTR traces that were used to debug this problem.
- When adding jsegdeps, always use jwork_insert() so we don't have more
than one segdep on a given jwork list.
Sponsored by: EMC / Isilon Storage Division
When a background copy of a cg is written we complete any work associated
with that bmsafemap. If new work has been added to the non-background
copy of the buffer it will be completed before the next write happens.
The solution is to do the rollbacks when we make the copy so only those
dependencies that were present at the time of writing will be completed
when the background write completes. This would've resulted in various
bitmap related corruptions and panics. It also would've expired journal
entries early causing journal replay to miss some records.
MFC after: 2 weeks
solve power loss problems with dishonest write caches. However, it
should improve the situation and force a full fsck when it is unable
to resolve with the journal.
- Resolve a case where the journal could wrap in an unsafe way causing
us to prematurely lose journal entries in very specific scenarios.
Discussed with: mckusick
MFC after: 1 month
(implemented by ffs_reallocblks_ufs[12]) relocates the file's blocks
so as to cluster them together into a contiguous set of blocks on
the disk.
When the cluster crosses the boundary into the first indirect block,
the first indirect block is initially allocated in a position
immediately following the last direct block. Block reallocation
would usually destroy locality by moving the indirect block out of
the way to keep the data blocks contiguous. This change compensates
for this problem by noting that the first indirect block should be
left immediately following the last direct block. It then tries
to start a new cluster of contiguous blocks (referenced by the
indirect block) immediately following the indirect block.
We should also do this for other indirect block boundaries, but it
is only important for the first one.
Suggested by: Bruce Evans
MFC: 2 weeks
the previous diradd had already finished it could have been reclaimed
already. This would only happen under heavy dependency pressure.
Reported by: Andrey Zonov <zont@FreeBSD.org>
Discussed with: mckusick
MFC after: 1 week
was still possible to open for write from the lower filesystem. There
is a symmetric situation where the binary could already has file
descriptors opened for write, but it can be executed from the nullfs
overlay.
Handle the issue by passing one v_writecount reference to the lower
vnode if nullfs vnode has non-zero v_writecount. Note that only one
write reference can be donated, since nullfs only keeps one use
reference on the lower vnode. Always use the lower vnode v_writecount
for the checks.
Introduce the VOP_GET_WRITECOUNT to read v_writecount, which is
currently always bypassed to the lower vnode, and VOP_ADD_WRITECOUNT
to manipulate the v_writecount value, which manages a single bypass
reference to the lower vnode. Caling the VOPs instead of directly
accessing v_writecount provide the fix described in the previous
paragraph.
Tested by: pho
MFC after: 3 weeks
extended using growfs(8). The problem here is that geom_label checks if
the filesystem size recorded in UFS superblock is equal to the provider
(i.e. device) size. This check cannot be removed due to backward
compatibility. On the other hand, in most cases growfs(8) cannot set
fs_size in the superblock to match the provider size, because, differently
from newfs(8), it cannot recompute cylinder group sizes.
To fix this problem, add another superblock field, fs_providersize, used
only for this purpose. The geom_label(4) will attach if either fs_size
(filesystem created with newfs(8)) or fs_providersize (filesystem expanded
using growfs(8)) matches the device size.
PR: kern/165962
Reviewed by: mckusick
Sponsored by: FreeBSD Foundation
with softupdates went away. Note that this does not fix the problem
entirely; I'm committing it now to make it easier for someone to pick
up the work.
Reviewed by: mckusick
In particular, do not lock Giant conditionally when calling into the
filesystem module, remove the VFS_LOCK_GIANT() and related
macros. Stop handling buffers belonging to non-mpsafe filesystems.
The VFS_VERSION is bumped to indicate the interface change which does
not result in the interface signatures changes.
Conducted and reviewed by: attilio
Tested by: pho
to pull vm_param.h was removed. Other big dependency of vm_page.h on
vm_param.h are PA_LOCK* definitions, which are only needed for
in-kernel code, because modules use KBI-safe functions to lock the
pages.
Stop including vm_param.h into vm_page.h. Include vm_param.h
explicitely for the kernel code which needs it.
Suggested and reviewed by: alc
MFC after: 2 weeks
now fully encapsulates all accesses to f_offset, and extends f_offset
locking to other consumers that need it, in particular, to lseek() and
variants of getdirentries().
Ensure that on 32bit architectures f_offset, which is 64bit quantity,
always read and written under the mtxpool protection. This fixes
apparently easy to trigger race when parallel lseek()s or lseek() and
read/write could destroy file offset.
The already broken ABI emulations, including iBCS and SysV, are not
converted (yet).
Tested by: pho
No objections from: jhb
MFC after: 3 weeks
is performed before exact size of the buffer is calculated, but the
buffer cannot have size greater then the total space allocated for
extended attributes. The existing check is executing with precise
size, but it is too late, since buffer needs to be allocated in
advance.
Also, adapt to uio_resid being of ssize_t type. Use lblktosize instead of
multiplying by fs block size by hand as well.
Reported and tested by: pho
MFC after: 1 week
and bmsafemap dependency structures in inodedep_lookup() and
bmsafemap_lookup() respectively. The setup of these structures must
be done while holding the soft-dependency mutex. If the inodedep is
allocated first, it may be freed in the I/O completion callback when
the mutex is released to allocate the bmsafemap. If the bmsafemap is
allocated first, it may be freed in the I/O completion callback when
the mutex is released to allocate the inodedep.
To resolve this problem, bmsafemap_lookup has had a parameter added
that allows a pre-malloc'ed bmsafemap to be passed in so that it does
not need to release the mutex to create a new bmsafemap. The
softdep_setup_inomapdep() routine pre-malloc's a bmsafemap dependency
before acquiring the mutex and starting to build the inodedep with a
call to inodedep_lookup(). The subsequent call to bmsafemap_lookup()
is passed this pre-allocated bmsafemap entry so that it need not
release the mutex if it needs to create a new one.
Reported by: Peter Holm
Tested by: Peter Holm
MFC after: 1 week
over just the active vnodes associated with a mount point to replace
MNT_VNODE_FOREACH_ALL in the vfs_msync, ffs_sync_lazy, and qsync
routines.
The vfs_msync routine is run every 30 seconds for every writably
mounted filesystem. It ensures that any files mmap'ed from the
filesystem with modified pages have those pages queued to be
written back to the file from which they are mapped.
The ffs_lazy_sync and qsync routines are run every 30 seconds for
every writably mounted UFS/FFS filesystem. The ffs_lazy_sync routine
ensures that any files that have been accessed in the previous
30 seconds have had their access times queued for updating in the
filesystem. The qsync routine ensures that any files with modified
quotas have those quotas queued to be written back to their
associated quota file.
In a system configured with 250,000 vnodes, less than 1000 are
typically active at any point in time. Prior to this change all
250,000 vnodes would be locked and inspected twice every minute
by the syncer. For UFS/FFS filesystems they would be locked and
inspected six times every minute (twice by each of these three
routines since each of these routines does its own pass over the
vnodes associated with a mount point). With this change the syncer
now locks and inspects only the tiny set of vnodes that are active.
Reviewed by: kib
Tested by: Peter Holm
MFC after: 2 weeks
The primary changes are that the user of the interface no longer
needs to manage the mount-mutex locking and that the vnode that
is returned has its mutex locked (thus avoiding the need to check
to see if its is DOOMED or other possible end of life senarios).
To minimize compatibility issues for third-party developers, the
old MNT_VNODE_FOREACH interface will remain available so that this
change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH
will be removed in head.
The reason for this update is to prepare for the addition of the
MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the
active vnodes associated with a mount point (typically less than
1% of the vnodes associated with the mount point).
Reviewed by: kib
Tested by: Peter Holm
MFC after: 2 weeks
static and declare its prototype in sys/vnode.h) so that it can be
called from process_deferred_inactive() (in ufs/ffs/ffs_snapshot.c)
instead of the body of vinactive() being cut and pasted into
process_deferred_inactive().
Reviewed by: kib
MFC after: 2 weeks
privilege attempts to toggle SF_SETTABLE flags.
- Use the '^' operator in the SF_SNAPSHOT anti-toggling check.
Flags are now stored to ip->i_flags in one place after all checks.
Submitted by: bde
and it is no longer referenced by a user process. The inode for a
file whose name has been removed, but is still referenced at the
time of a crash will still be allocated in the filesystem, but will
have no references (e.g., they will have no names referencing them
from any directory).
With traditional soft updates these unreferenced inodes will be
found and reclaimed when the background fsck is run. When using
journaled soft updates, the kernel must keep track of these inodes
so that it can find and reclaim them during the cleanup process.
Their existence cannot be stored in the journal as the journal only
handles short-term events, and they may persist for days. So, they
are tracked by keeping them in a linked list whose head pointer is
stored in the superblock. The journal tracks them only until their
linked list pointers have been commited to disk. Part of the cleanup
process involves traversing the list of unreferenced inodes and
reclaiming them.
This bug was triggered when confusion arose in the commit steps
of keeping the unreferenced-inode linked list coherent on disk.
Notably, a race between the link() system call adding a link-count
to a file and the unlink() system call removing a link-count to
the file. Here if the unlink() ran after link() had looked up
the file but before link() had incremented the link-count of the
file, the file's link-count would drop to zero before the link()
incremented it back up to one. If the file was referenced by a
user process, the first transition through zero made it appear
that it should be added to the unreferenced-inode list when in
fact it should not have been added. If the new name created by
link() was deleted within a few seconds (with the file still
referenced by a user process) it would legitimately be a candidate
for addition to the unreferenced-inode list. The result was that
there were two attempts to add the same inode to the unreferenced-inode
list which scrambled the unreferenced-inode list's pointers leading
to a panic. The fix is to detect and avoid the false attempt at
adding it to the unreferenced-inode list by having the link()
system call check to see if the link count is zero before it
increments it. If it is, the link() fails with ENOENT (showing that
it has failed the link()/unlink() race).
While tracking down this bug, we have added additional assertions
to detect the problem sooner and also simplified some of the code.
Reported by: Kirk Russell
Fix submitted by: Jeff Roberson
Tested by: Peter Holm
PR: kern/159971
MFC (to 9 only): 2 weeks
flags check.
- Add a comment for the immutable/append check done after handling of
the flags.
- Style improvements.
No functional change intended.
Submitted by: bde
MFC after: 2 weeks
While we have a snapshot vnode unlocked to avoid a deadlock with another
inode in the same inode block being updated, the filesystem containing
it may be forcibly unmounted. When that happens the snapshot vnode is
revoked. We need to check for that condition and fail appropriately.
This change will be included along with 232351 when it is MFC'ed to 9.
Spotted by: kib
Reviewed by: kib
