configuration from the FDT data, then set the pins into the requested
state. As part of this the gpio controller now reports the correct number
of pins instead of returning the number of bank * 32.
To allow for a future consolidated kernel we add the SOC_ALLWINNER_A10 and
SOC_ALLWINNER_A20 kernel options. These need to be set as appropriate for
the SoC the kernel will boot on.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D5177
are not utilized there. Only domain #0 is used and there is no reference
to it in the whole pmap-v6.c. Thus initialize domain access register in
locore-v6.c without reference too.
Before this change all mappings done by this function were executable
as pte entries have NOT EXECUTABLE bit.
The function is used only for static device mappings at present. Thus
this is also a fix as DEVICE memory should not be mapped as executable.
will allow for code that uses the old fdt_get_range and fdt_regsize
functions to find a range, map it, access, then unmap to replace this, up
to and including the map, with a call to OF_decode_addr.
As this function should only be used in the early boot code the unmap is
mostly do document we no longer need the mapping as it's a no-op, at least
on arm.
Reviewed by: jhibbits
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5258
am335x_prcm driver which uses it. Used BUS_PASS_BUS is a quick pick
for now and may be revised when other drivers start using multipass
feature.
This is needed after an update of Linux dts files done in r295436.
(1) The channel mask is get from "brcm,dma-channel-mask" property of
dma node, and if not provided, from "broadcom,channels" property.
(2) Consequently, sdhci driver does not allocate any specific channel.
(3) Use CS_RESET bit for initial channel reset.
Differential Revision: https://reviews.freebsd.org/D4303
A10/A20 SoC. Based loosely on the submitters NetBSD driver, tested on
Cubieboard 2. Playback and capture are supported.
Submitted by: Jared McNeill <jmcneill@invisible.ca>
Differential Revision: https://reviews.freebsd.org/D5202
least the audio codec driver currently in review.
Submitted by: Jared McNeill <jmcneill@invisible.ca>
Differential Revision: https://reviews.freebsd.org/D5050
with this and an Allwinner SoC to power off.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D4954
Marvell twsi part, however uses different register locations, as such split
the existing driver into Marvell and Allwinner attachments.
While here clean a few style issues.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D4846
* Use the Linux compat string
* Use EARLY_DRIVER_MODULE to attach at the right time
* Add a generic A10 kernel config file
* A20 now use generic_timer
* Add two new dts files for Olimex boards
* Update our custom DTS file for A10 and A20 to use the same compatible
property names as the vendor ones.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D4792
which return -1 as well as on tier 1 archs. Remove block_userspace_access
used only in these implementations.
(1) These functions may be called in interrupt context and pcb_onfault
can be already set in this time. Thus, prior pcb_onfault must be saved
and restored afterwards.
(2) The check that an abort came either from nested interrupt or while
in critical section or holding not sleepable lock must be avoided for
this case.
These functions are called only for profiling reason, so there will be
only small gain by making the code more complex.
(1) Move cnt.v_trap increment to the beginning. There is cnt.v_vm_faults
counter in vm_fault(), so a number of hardware emulation aborts may be
get roughly as difference.
(2) Move kdb_reenter() up to not be ignored if pmap_fault() has failed.
(3) Update comments.
