17h supports MCA thresholding in the same way as 16h and earlier.
Supposedly a ScalableMca feature bit in CPUID 8000_0007:EBX must be set, but
that was not true for earlier models, so be careful about relying on it.
While here, document a missing bit in LS MCA MISC0.
Reviewed by: truckman
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12237
It doesn't seem necessary to busy the CPU while waiting to transition
into a different p-state.
PR: 221621 (related, but does not completely address)
Reviewed by: truckman
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12260
Fix from fallout introduced in r322348 that moved the cpus array to a
dynamic allocation without zeroing the area.
Reported by: mjg
MFC with: r322348
Reviewed by: mjg
Differential revision: https://reviews.freebsd.org/D12220
Not enabling FSGSBASE in %cr4 does not prevent reporting of the
feature by the CPUID instruction (blame Int*l). As result, kernels
which were run under monitors pretended that usermode cannot modify
TLS base without the syscall, while libc noted right combination of
capable CPU and the new kernel version, trying to use the WRFSBASE
instruction.
Really old hypervisors that cannot handle enablement of these features
in %cr4 would require the manual configuration, by setting the loader
tunable hw.cpu_stdext_disable=0x81
Reported by: lwhsu, mjoras
Sponsored by: The FreeBSD Foundation
MFC after: 18 days
Rather than repeatedly nesting loops, separate concerns with a single loop
per call stack level. Use a table to drive the recursive routine. Handle
missing topology layers more gracefully (infer a single unit).
Analyze some additional optional layers which may be present on e.g. AMD Zen
systems (groups, aka dies, per package; and cachegroups, aka CCXes, per
group).
Display that additional information in the boot-time topology information,
when it is relevent (non-one).
Reviewed by: markj@, mjoras@ (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12019
This information is normally available via acpi_perf, but in case it is not,
add support for fetching the information via MSRs on AMD family 17h (Zen)
processors. Zen uses a slightly different formula than previous generation
AMD CPUs.
This was inspired by, but does not fix, PR 221621.
Reported by: Sean P. R. <seanpr AT swbell.net>
Reviewed by: mjoras@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12082
The Nodes per Processor topology information determines how many bits of the
APIC ID represent the Node (Zeppelin die, on Zen systems) ID. Documented in
Ryzen and Epyc Processor Programming Reference (PPR).
Correct topology information enables the scheduler to make better decisions
on this hardware.
Reviewed by: kib@
Tested by: jeff@ (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11801
Fallout from r322588. I'm not sure why !SMP is a knob we have, but, we have
it.
Reported by: Michael Butler <imb AT protected-networks.net>
Sponsored by: Dell EMC Isilon
Add an option to dynamically rebalance interrupts across cores
(hw.intrbalance); off by default.
The goal is to minimize preemption. By placing interrupt sources on distinct
CPUs, ithreads get preferentially scheduled on distinct CPUs. Overall
preemption is reduced and latency is reduced. In our workflow it reduced
"fighting" between two high-frequency interrupt sources. Reduced latency
was proven by, e.g., SPEC2008.
Submitted by: jeff@ (earlier version)
Reviewed by: kib@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D10435
removes the only reference to atrtc_set() from outside of atrtc.c, so make
it static.
The xen timer driver registers as a realtime clock with 1us resolution. In
the past that resulted in only the xen timer's clock_settime() getting
called, so it would call atrtc_set() to set the hardware clock as well. As
of r32090, the clock_settime() method of all registered realtime clocks gets
called, so the xen driver no longer needs to chain-call the lower-resolution
driver.
Thanks to royger@ for talking me through the xen stuff, and for testing.
Introduce a new define to take int account the xAPIC ID limit, for
systems where x2APIC is not available/reliable.
Also change some of the usages of the APIC ID to use an unsigned int
(which is the correct storage type to deal with x2APIC IDs as found in
x2APIC MADT entries).
This allows booting FreeBSD on a box with 256 CPUs and APIC IDs up to
295:
FreeBSD/SMP: Multiprocessor System Detected: 256 CPUs
FreeBSD/SMP: 1 package(s) x 64 core(s) x 4 hardware threads
Package HW ID = 0
Core HW ID = 0
CPU0 (BSP): APIC ID: 0
CPU1 (AP/HT): APIC ID: 1
CPU2 (AP/HT): APIC ID: 2
CPU3 (AP/HT): APIC ID: 3
[...]
Core HW ID = 73
CPU252 (AP): APIC ID: 292
CPU253 (AP/HT): APIC ID: 293
CPU254 (AP/HT): APIC ID: 294
CPU255 (AP/HT): APIC ID: 295
Submitted by: kib (previous version)
Relnotes: yes
MFC after: 1 month
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D11913
So that MAX_APIC_ID can be bumped without wasting memory.
Note that the usage of MAX_APIC_ID in the SRAT parsing forces the
parser to allocate memory directly from the phys_avail physical memory
array, which is not the best approach probably, but I haven't found
any other way to allocate memory so early in boot. This memory is not
returned to the system afterwards, but at least it's sized according
to the maximum APIC ID found in the MADT table.
Sponsored by: Citrix Systems R&D
MFC after: 1 month
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D11912
Populate the lapics arrays and call cpu_add/lapic_create in the setup
phase instead. Also store the max APIC ID found in the newly
introduced max_apic_id global variable.
This is a requirement in order to make the static arrays currently
using MAX_LAPIC_ID dynamic.
Sponsored by: Citrix Systems R&D
MFC after: 1 month
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D11911
reduces diff between amd64 and i386. Also, it fixes a regression introduced
in r322076, i.e., identify_hypervisor() failed to identify some hypervisors.
This function assumes cpu_feature2 is already initialized.
Reported by: dexuan
Tested by: dexuan
but it was broken since r273800 (and r278522, its MFC to stable/10) because
identify_cpu() is called too late, i.e., after init_param1().
MFC after: 3 days
In this case we shouldn't assume that the thread has a valid frame pointer.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11787
Pollution from counter.h made __pcpu visible in amd64/pmap.c. Delete
the existing extern decl of __pcpu in amd64/pmap.c and avoid referring
to that symbol, instead accessing the pcpu region via PCPU_SET macros.
Also delete an unused extern decl of __pcpu from mp_x86.c.
Reviewed by: kib
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11666
The mutex protecting access to the registered realtime clock should not be
overloaded to protect access to the atrtc hardware, which might not even be
the registered rtc. More importantly, the resettodr mutex needs to be
eliminated to remove locking/sleeping restrictions on clock drivers, and
that can't happen if MD code for amd64 depends on it. This change moves the
protection into what's really being protected: access to the atrtc date and
time registers.
This change also adds protection when the clock is accessed from
xentimer_settime(), which bypasses the resettodr locking.
Differential Revision: https://reviews.freebsd.org/D11483
--Remove special-case handling of sparc64 bus_dmamap* functions.
Replace with a more generic mechanism that allows MD busdma
implementations to generate inline mapping functions by
defining WANT_INLINE_DMAMAP in <machine/bus_dma.h>. This
is currently useful for sparc64, x86, and arm64, which all
implement non-load dmamap operations as simple wrappers
around map objects which may be bus- or device-specific.
--Remove NULL-checked bus_dmamap macros. Implement the
equivalent NULL checks in the inlined x86 implementation.
For non-x86 platforms, these checks are a minor pessimization
as those platforms do not currently allow NULL maps. NULL
maps were originally allowed on arm64, which appears to have
been the motivation behind adding arm[64]-specific barriers
to bus_dma.h, but that support was removed in r299463.
--Simplify the internal interface used by the bus_dmamap_load*
variants and move it to bus_dma_internal.h
--Fix some drivers that directly include sys/bus_dma.h
despite the recommendations of bus_dma(9)
Reviewed by: kib (previous revision), marius
Differential Revision: https://reviews.freebsd.org/D10729
Do not queue dmar_map_entries with zeroed gseq to
dmar_qi_invalidate_locked(). Zero gseq stops the processing in the qi
task. Do not assign possibly uninitialized on-stack gseq to map
entries when requeuing them on unit tlb_flush queue. Random garbage
in gsec is interpreted as too high invalidation sequence number and
again stop the processing in the task.
Make the sequence numbers generation completely contained in
dmar_qi_invalidate_locked() and dmar_qi_emit_wait_seq(). Upper code
directly passes boolean requesting emiting wait command instead of
trying to provide hint to avoid it by passing NULL gseq pointer.
Microoptimize the requeueing to tlb_flush queue by doing it for the
whole queue.
Diagnosed and tested by: Brett Gutstein <bgutstein@rice.edu>
Discussed with: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
All interrupts are routed to the sole CPU in that case implicitly.
This is a regression in EARLY_AP_STARTUP. Previously the 'assign_cpu'
variable was only set when a multi-CPU system finished booting, so
it's value both meant that interrupts could be assigned and that
there was more than one CPU.
PR: 219882
Reported by: ota@j.email.ne.jp
MFC after: 3 days
Do not try to set LMA bit while CPU is still in legacy mode.
Apparently Intel CPUs ignore non-id writes to LMA, while AMD's
(over-)react with #GP.
Reported and tested by: danfe
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
An extra copy of the system call gate was added to the default LDT back
in 1996 (r18513 / r18514). However, the ability to run BSD/OS 2.1
i386 binaries under FreeBSD's native ABI is most likely no longer
needed.
Discussed with: kib
This patch improves the boundary checks in busdma to allow more cases
using the regular page based kernel memory allocator. Especially in
the case of having a non-zero boundary in the parent DMA tag. For
example AMD64 based platforms set the PCI DMA tag boundary to
PCI_DMA_BOUNDARY, 4GB, which before this patch caused contiguous
memory allocations to be preferred when allocating more than PAGE_SIZE
bytes. Even if the required alignment was less than PAGE_SIZE bytes.
This patch also fixes the nsegments check for using kmem_alloc_attr()
when the maximum segment size is less than PAGE_SIZE bytes.
Updated some comments describing the code in question.
Differential Revision: https://reviews.freebsd.org/D10645
Reviewed by: kib, jhb, gallatin, scottl
MFC after: 1 week
Sponsored by: Mellanox Technologies
operation after processor is configured to allow all required
features.
In particular, NX must be enabled in EFER, otherwise load of page
table element with nx bit set causes reserved bit page fault. Since
malloc uses direct mapping for small allocations, in particular for
the suspension pcbs, and DMAP is nx after r316767, this commit tripped
fault on resume path.
Restore complete state of EFER while wakeup code is still executing
with custom page table, before calling resumectx, instead of trying to
guess which features might be needed before resumectx restored EFER on
its own.
Bisected and tested by: trasz
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
In exceptional circumstances, an MCA exception will trigger when the
freelist is exhausted. In such a case, no error will be logged on the list
and 'mca_count' will not be incremented.
Prior to this patch, all CPUs that received the exception would spin
forever.
With this change, the CPU that detects the error but finds the freelist
empty will proceed to panic the machine, ending the deadlock.
A follow-up to r260457.
Reported by: Ryan Libby <rlibby at gmail.com>
Reviewed by: jhb@
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D10536
in place. To do per-cpu stats, convert all fields that previously were
maintained in the vmmeters that sit in pcpus to counter(9).
- Since some vmmeter stats may be touched at very early stages of boot,
before we have set up UMA and we can do counter_u64_alloc(), provide an
early counter mechanism:
o Leave one spare uint64_t in struct pcpu, named pc_early_dummy_counter.
o Point counter(9) fields of vmmeter to pcpu[0].pc_early_dummy_counter,
so that at early stages of boot, before counters are allocated we already
point to a counter that can be safely written to.
o For sparc64 that required a whole dummy pcpu[MAXCPU] array.
Further related changes:
- Don't include vmmeter.h into pcpu.h.
- vm.stats.vm.v_swappgsout and vm.stats.vm.v_swappgsin changed to 64-bit,
to match kernel representation.
- struct vmmeter hidden under _KERNEL, and only vmstat(1) is an exclusion.
This is based on benno@'s 4-year old patch:
https://lists.freebsd.org/pipermail/freebsd-arch/2013-July/014471.html
Reviewed by: kib, gallatin, marius, lidl
Differential Revision: https://reviews.freebsd.org/D10156
The MFC will include a compat definition of smp_no_rendevous_barrier()
that calls smp_no_rendezvous_barrier().
Reviewed by: gnn, kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D10313
This is applicable only to the older processors that do not have the AMD
Topology extension.
Opteron 6100-series "Magny-Cours" processors had multiple nodes within a
package and didn't have the Topology extension. Without this change
FreeBSD would assume that those processors have a single L3 cache shared
by all cores while, in fact, each node has its own L3 cache.
Many thanks to Freddie Cash <fjwcash@gmail.com> for providing valuable
hardware information.
MFC after: 2 weeks
The change introduced a dependency between genassym.c and header files
generated from .m files, but that dependency is not specified in the
make files.
Also, the change could be not as useful as I thought it was.
Reported by: dchagin, Manfred Antar <null@pozo.com>, and many others
The change seems to be more in the nomenclature than in the way the
topology is advertised by the hardware.
Tested by: truckman (earlier version of the change)
MFC after: 2 weeks
Implement timeouts for register-based DMAR commands. Tunable/sysctl
hw.dmar.timeout specifies the timeout in nanoseconds, set it to zero
to allow infinite wait. Default is 1ms.
Runtime modification of the sysctl is not safe, it is allowed for
debugging.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Kernel environment variable hw.busdma.default can take values 'bounce'
and 'dmar' and selects corresponding busdma backend as default.
Per-device environment variable hw.busdma.pci<domain>.<bus>.<slot>.<func>
takes the same values and overrides hw.busdma.default for the given device.
Note that even with hw.busdma.default=bounce, DMA translation engines
are still started if DMARs are enabled, to disable them use
hw.dmar.dma tunable, as before.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
