to make it consistent with newfs. Document the legality of '_'
in label names in both tunefs(8) and newfs(8).
PR: 235182
Submitted by: darius@dons.net.au
Reviewed by: Conrad Meyer
MFC after: 3 days
Sponsored by: Netflix
Fix dublicate value in what is apparent copypaste mistake. The last value
in mask is supposed to be for counter 7, not counter 3.
PR: 229790
Submitted by: David Binderman <dcb314@hotmail.com>
MFC after: 1 week
cpuid and local cpu variable are unsigned so checking if value is less than zero
always yields false.
PR: 211088
Submitted by: David Binderman <dcb314@hotmail.com>
MFC after: 1 week
This is meant to clarify the fact that the system call will not fail
with -1/EFAULT, as one might expect, when reading the sendfile(2)
manpage today.
While here, pet the mandoc linter, when dealing with the section that
describes valid values for `flags`.
PR: 232210
MFC after: 2 weeks
Approved by: emaste (mentor)
Reviewed by: glebius, 0mp
Differential Revision: https://reviews.freebsd.org/D18949
The rest of this stuff is still to be discussed, but I think at this
point we have the agreement that the aliases should go.
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
This allows the part of the rewrite of TCP reassembly in this
files to be MFCed to stable/11 with manual change.
MFC after: 3 days
Sponsored by: Netflix, Inc.
The new loop to sync and unload descriptors was indexed
by "i", rather than "j". The panic was caused by "i"
being advanced rather than "j", and eventually becoming
out of bounds.
Reviewed by: kib
MFC after: 3 days
Sponsored by: Netflix
FreeBSD previously defaulted to DWARF 2 because several tools (gdb,
ctfconvert, etc.) did not support later versions. These have either
been fixed or are deprecated.
Note that gdb 6 still exists but has been moved out of $PATH into
/usr/libexec and is intended only for use by crashinfo(8). The kernel
build sets the DWARF version explicitly via -gdwarf2, so this should
have no effect there.
PR: 234887 [exp-run]
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17930
When implementing support for IW10, an update in the computation
of the restart window used after an idle phase was missed. To
minimize code duplication, implement the logic in tcp_compute_initwnd()
and call it. This fixes a bug in NewReno, which was not aware of
IW10.
Submitted by: Richard Scheffenegger
Reviewed by: tuexen@
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18940
When cleaning up a vnet we free the counters in V_pf_default_rule and
V_pf_status from shutdown_pf(), but we can still use them later, for example
through pf_purge_expired_src_nodes().
Free them as the very last operation, as they rely on nothing else themselves.
PR: 235097
MFC after: 1 week
Replace in-place implementation with system-wide one; since it
guarantees non-zero result drop all less-than-one checks from
drivers and net80211.
MFC after: 2 weeks
r343407 accidentally introduced a typo (folling -> following). While
reading the change out loud, I realized that the original sentence was
wordy. almost sounding like a run-on sentence.
Improve the flow by splitting up the two thoughts into two distinct sentence
fragments.
PR: 194547, 208497
Reviewed by: emaste
Approved by: emaste (mentor)
MFC after: 1 month
MFC with: r343407
Differential Revision: https://reviews.freebsd.org/D18947
While these warnings are false positives, the use of strdup() instead of
malloc() and strcpy() simplifies and clarifies the code.
While checking the remaining uses of strcpy and strcat I noticed an
assignment of a strlen() to a variable "s", whose value needs to be
preserved for use in later output routines (where it is used to allocate
a buffer). I do not think that the value of "s" will come out lower than
its correct value and thus there is no risk of a buffer overflow, in the
general case, but a specially crafter argument might lead to an overflow.
The bogus assignment to "s" is removed since this value was only used a
single time in the following malloc() call, which has been removed.
MFC after: 2 weeks
Add a bunch of examples on how to use ZFS features like:
- listing available space,
- setting and displaying a userquota,
- displaying pool I/O statistics and pool history,
- displaying the compression ratio for a dataset,
- various list options (sorting, removing headers),
- performing a dry-run of a snapshot delete,
- removing a range of snapshots,
- setting a custom property,
- preventing removal of a snapshot with ZFS holds,
- permission sets for zfs send/receive.
Additionally, clarify the existing examples a bit when
it comes to displaying space by mentioning UFS explicitly.
Other examples include displaying I/O in top(1), querying
sysctl(8) for active CPUs and available RAM. Mention systat(1)
and its options, too.
While here, reformat the example to upload a dmesg(8) a bit
to wrap properly.
Thanks to Allan Jude for his help with some of the ZFS examples.
Reviewed by: dru,allanjude
Approved by: allanjude (earlier version)
MFC after: 3 days
Relnotes: yes (ZFS examples in freebsd-tips)
Differential Revision: https://reviews.freebsd.org/D18541
connectivity.
Looking at past changes in this area like r337866, some refcounting
bugs have been introduced, one by one. For example like calling
in6m_disconnect() and in6m_rele_locked() in mld_v1_process_group_timer()
where previously no disconnect nor refcount decrement was done.
Calling in6m_disconnect() when it shouldn't causes IPv6 solitation to no
longer work, because all the multicast addresses receiving the solitation
messages are now deleted from the network interface.
This patch reverts some recent changes while improving the MLD
refcounting and concurrency model after the MLD code was converted
to using EPOCH(9).
List changes:
- All CK_STAILQ_FOREACH() macros are now properly enclosed into
EPOCH(9) sections. This simplifies assertion of locking inside
in6m_ifmultiaddr_get_inm().
- Corrected bad use of in6m_disconnect() leading to loss of IPv6
connectivity for MLD v1.
- Factored out checks for valid inm structure into
in6m_ifmultiaddr_get_inm().
PR: 233535
Differential Revision: https://reviews.freebsd.org/D18887
Reviewed by: bz (net)
Tested by: ae
MFC after: 1 week
Sponsored by: Mellanox Technologies
because the destructor will access the if_ioctl() callback in the ifnet
pointer which is about to be freed. This prevents use-after-free.
PR: 233535
Differential Revision: https://reviews.freebsd.org/D18887
Reviewed by: bz (net)
Tested by: ae
MFC after: 1 week
Sponsored by: Mellanox Technologies
tinybsd offers two choices when prompting user for MFSROOT: 'YES'
and 'NO'. Script logic only handles 'yes'. Change offered values
to lower case.
PR: 131059
Submitted by: Brock Williams <brock@cotcomsol.com>
MFC after: 1 week
* This hopefully avoids some firmware panics, I was occasionally seeing,
when iwm disconnects upon losing signal to an access point at some point.
* This is synchronizing the if_iwm_time_event.c file a bit more from the
corresponding Linux iwlwifi/mvm/time-event.c.
Taken-From: Linux iwlwifi
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (e8cb71584a6a72232c13151d60e57f7f229220eb)
* This is a mix of the OpenBSD Git 7fd9664469d1b717a307eebd74aeececbd3c41cc
change, and syncing with the Linux iwlwifi code.
Taken-From: Linux iwlwifi, and OpenBSD
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (706a3044afd27c3fecfdf57bec1695310e53e228)
* This avoids firmware resets in all the cases in iwm_newstate(). Instead
iwm_bring_down_firmware() is called, which tears down all the STA
connection state, according to the sc->sc_firmware_state value.
* Improve the behaviour of the LED blinking a bit, so it only blinks when
there really is a wireless scan going on.
* Print the newstate arg in debug output of iwm_newstate(), to help in
debugging.
This is inspired by the firmware state maintaining change in OpenBSD's iwm,
by stsp@openbsd.org (OpenBSD Git 0ddb056fb7370664b1d4b84392697cb17d1a414a).
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (8a41b10ac639d0609878696808387a6799d39b57)
* While there remove unused IWM_UCODE_TLV_CAPA_LMAC_UPLOAD definition,
which isn't defined in iwlwifi.
Taken-From: Linux iwlwifi
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (fd4f9de8bc72ea961e50829b45b59d0549040b7d)
* Remove outdated notifications IWM_SCAN_ABORT_CMD,
IWM_SCAN_START_NOTIFICATION and IWM_SCAN_RESULTS_NOTIFICATION.
* Remove unused enum iwm_scan_complete_status.
* Use the updated FW Api version 3 of struct iwm_scan_results_notif.
* No functional change, since struct iwm_scan_results_notif is never
accessed in iwm at the moment.
Taken-From: Linux iwlwifi commits 1083fd7391e989be52022f0f338e9dadc048b063
and 75118fdb63496e4611ab50380499ddd62b9de69f.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (c947b0b8dc96dabefd63f7b70d53695e36c7b64f)
* Rename some structs and struct members for firmware handling.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (4b1006a6e4d0f61d48c67b46e1f791e30837db67)
