Without HID_IGNORE quirk enabled these models appear in the system as a uhid
devices while NUT (Network UPS Tool) expects them to be ugen.
PR: 131521
Submitted by: Naoyuki Tai <ntai@smartfruit.com>, John Bayly <john.bayly@tipstrade.net>
MFC after: 1 week
src could potentially be installed under the based dir
and not under the root or vice versa.
PR: 224048
Submitted by: Gerald Aryeetey <aryeeteygerald_rogers.com>
Reviewed by: delphij
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18849
If i386 has more than 4G of memory, allow the same number of busdma
bounce pages as for amd64. In fact, in this case bouncing sometimes
is much heavier than on amd64.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18854
Right now bus_addr_t and vm_paddr_t are always aliased to the same
underlying integer type on x86, which makes the interchange hard to
detect. Shortly, i386 kernel would use uint64_t for vm_paddr_t to
enable automatic use of PAE paging structures if hardware allows it,
while bus_addr_t would be extended to 64bit only when PAE option is
specified.
Fix all places that were identified as using bus_addr_t while page
address was assumed. This was performed by testing the complete PAE
merging patch on machine with > 4G of RAM enabled.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18854
In order to allow single kernel to use PAE pagetables on i386 if
hardware supports it, and fall back to classic two-level paging
structures if not, superpage code should be able to adopt to either 2M
or 4M superpages size. There I make MI VM structures large enough to
track the biggest possible superpage, by allowing architecture to
define VM_NFREEORDER_MAX and VM_LEVEL_0_ORDER_MAX constants.
Corresponding VM_NFREEORDER and VM_LEVEL_0_ORDER symbols can be
defined as runtime values and must be less than the _MAX constants.
If architecture does not define _MAXs, it is assumed that _MAX ==
normal constant.
Reviewed by: markj
Tested by: pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18853
The SPA ids are published numbers, so it's safe (if not a bit
annoying) to copy them into a source file.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Sponsored by: Intel Corporation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18733
The NVDIMM root device is parent to the individual ACPI NVDIMM
devices. Add a driver for the NVDIMM root device that can own
enumeration of NVDIMM devices as well as NVDIMM SPA ranges that the
system has.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Sponsored by: Intel Corporation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18346
Fix missing initialisation of sc_flags into a valid sync state on clone which
breaks carp in pfsync.
This regression was introduce by r342051.
PR: 235005
Submitted by: smh@FreeBSD.org
Pointy hat to: kp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18882
- Add ADA_Q_NO_TRIM quirk to be used with the device that falsely advertise TRIM support
- Add ADA_Q_NO_TRIM entry for KingDian S200 SSD
PR: 222802
Submitted by: Bertrand Petit <bsdpr@phoe.frmug.org>
MFC after: 1 week
This is mostly a style fix since the code in question is not called multiple
times and doesn't have cummulative effect.
PR: 204953
Submitted by: David Binderman <dcb314@hotmail.com>
MFC after: 1 week
Even M_WAITOK callers must check for failure. For example, if the device is
quiescing, either due to automatic error-recovery induced reset, or due to
administrative detach, the routine will return ENXIO and the acquire
reference will not be held. So, there is no mode in which it is safe to
assume the routine succeeds without checking.
Sponsored by: Dell EMC Isilon
Since the loader zfs reader does not need to read the dump zvol, we can
just enable the feature.
illumos issue #9051https://www.illumos.org/issues/9051
MFC after: 2 weeks
Notify users that upgrading from -CURRENT or -STABLE is unsupported by
freebsd-update.
Also ensure --currently-running provides a correctly formatted release
(as done by -r).
PR: 234771
Submitted by: Gerald Aryeetey <aryeeteygerald_rogers.com>
Reported by: yuri
Reviewed by: bcran
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18803
It fixes a case where eg a 2KB group entry would take several seconds
to complete with cache enabled in nsswitch.conf.
MFC after: 2 weeks
Sponsored by: Chalmers University of Technology
Differential Revision: https://reviews.freebsd.org/D18392
This was intended to fix the soft reset timeout on boot for OrangePi One/R1
with internal PHY, but seems to cause other problems later on due to soft
resetting around some state changes that may or may not make the NIC
non-functional.
Reverting this for now while a better solution is sought out.
on devices using wear-leveling algorithms as a few weeks passed
after review and discussion of trim(8) ceased and
we still have no utility to perform the job.
Reviewed by: hackers@
MFC after: 2 weeks
- Limit rights on stdio before opening input files. Otherwise, open()
may return one of the standard descriptors and we end up limiting
rights such that we cannot read from one of the input files.
- Use caph_limit_stdio(), which suppresses EBADF, to ensure that
we don't emit an error if one of the stdio streams is closed.
- Don't bother further limiting rights on stdin when stdin isn't going
to be used. Doing so correctly requires checking for a number of
edge cases, and it doesn't provide any significant benefit.
PR: 234885
Reviewed by: oshogbo
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18860
while processing not entirely correct jail.conf(5) file
having something like "ip4.addr = 127.0.0.1;" and no "ip4 = ...;"
so extrap variable stays NULL.
Reported by: marck
MFC after: 1 month
An integrity check such as a check-hash or a cross-correlation failed.
The integrity error falls between EINVAL that identifies errors in
parameters to a system call and EIO that identifies errors with the
underlying storage media. EINTEGRITY is typically raised by intermediate
kernel layers such as a filesystem or an in-kernel GEOM subsystem when
they detect inconsistencies. Uses include allowing the mount(8) command
to return a different exit value to automate the running of fsck(8)
during a system boot.
These changes make no use of the new error, they just add it. Later
commits will be made for the use of the new error number and it will
be added to additional manual pages as appropriate.
Reviewed by: gnn, dim, brueffer, imp
Discussed with: kib, cem, emaste, ed, jilles
Differential Revision: https://reviews.freebsd.org/D18765
Add all the files under /usr/share/examples to the MK_EXAMPLES
section. OLD_DIRS entries are not removed if they're not empty so
prior to this change WITHOUT_EXAMPLES didn't have significant effect
on the updated system.
PR: 228484
Submitted by: Dmitry Wagin <dmitry.wagin@ya.ru> (original patch)
MFC after: 1 week
Add two more entries for WITHOUT_SENDMAIL install. The /var/spool/clientmqueue
entry would be deleted only if there are no files/dirs in it, so the
content generated during previous lifecycle of the system is safe
PR: 228484
Submitted by: Dmitry Wagin <dmitry.wagin@ya.ru>
MFC after: 1 week
This is CVS revision 1.31 from NetBSD lib/libedit/chartype.c:
Make sure that argv is NULL terminated since functions like tty_stty rely
on it to be so (Gerry Swinslow)
This broke when the wide-character support was enabled in libedit. The
conversion from multibyte to wide-character did not supply the apparently
expected terminating NULL in the new argv array.
PR: 233343
Submitted by: Yuichiro NAITO
Obtained from: NetBSD
MFC after: 1 week
Add parentheses to perform assignment before comparison. The prior
condition worked because fdt_parent_addr_cells returns 1 for the DTB
on which fdt_fixup_ranges is called and accidentally par_addr_cells
ends up to be set to the same value.
PR: 210705
Submitted by: David Binderman <dcb314@hotmail.com>
MFC after: 1 week
From NetBSD: Since the MAC can get stuck in reset state with no link, ignore
reset timeouts and continue with initializing the device.
Fixes "soft reset timeout" issue at boot with no network cable plugged in.
awg_init may be called multiple times throughout normal interface usage, so
the tx/rx descriptor base address registers must be written after each MAC
reset and are moved as such.
This problem has been observed on FreeBSD, H3/H2+ devices with an internal
PHY (includes OrangePi R1, OrangePi One at least).
Reviewed by: manu, ganbold
Obtained from: NetBSD
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18844
Generic Tx stats fixes:
- do not try to parse "aggregation status" for single frames; send them
to iwn_tx_done() instead;
- try to attach mbuf / node reference pair to reported BA events;
allows to fix reported status for ieee80211_tx_complete() and ifnet counters
(previously all A-MPDU frames were counted as failed - see PR 210211);
requires few more firmware bug workarounds;
- preserve short / long retry counters for wlan_amrr(4)
(disabled for now - causes significant performance degradation).
- Add new IWN_DEBUG_AMPDU debug category.
- Add one more check into iwn_tx_data() to prevent aggregation ring
overflow.
- Workaround 'seqno % 256' != 'current Tx slot' case (until D9195 is not
in the tree).
- Improve watchdog timer updates (previously watchdog check was omitted
when at least one frame was transmitted).
- Stop Tx when memory leak in currently used ring was detected (unlikely
to happen).
- Few other minor fixes.
Was previously tested with:
- Intel 6205, STA mode (Tx aggregation behaves much better now).
- Intel 4965AGN, STA mode (still unstable).
PR: 192641, 210211
Reviewed by: adrian, dhw
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D10728
Rate tables have this bit set to indicate minimal set of basic rates;
however, it overlappes with MCS bit, so rate2ridx() will treat them as
an 11n rate.
Due to the current rates setup the issue can be reproduced only
in 5GHz band with 11n / protection enabled.
Tested with RTL8821AU, HOSTAP mode.
MFC after: 5 days
- Specify BUS_DMA_NOWAIT for bus_dmamap_load() on rx refill, since
callbacks are not supposed to be used.
- Match tso/non-tso tags to corresponding tx map operations. Create
separate tso maps for tx descriptors. In particular, do not use
non-tso tag to load, unload, or destroy a map created with tso tag.
- Add missed bus_dmamap_sync() calls.
Submitted by: marius.
Reported and tested by: pho
Reviewed by: marius
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Based on the description in Linux man page.
Reviewed by: markj, ngie (previous version)
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18837
