Commit Graph

12287 Commits

Author SHA1 Message Date
wosch
e52fdfe1fa A manpage. May be the file nologin.5 should located in
src/share/man/man5.
1996-01-28 23:49:05 +00:00
wosch
1f24c85f7b Read from standard input if file name "-" is given. 1996-01-28 23:43:37 +00:00
dyson
2e58df0ad2 Added sys_pipe into files. 1996-01-28 23:43:06 +00:00
dyson
894b801eee Enable the new fast pipe code. The old pipes can be used with the
"OLD_PIPE" config option.
1996-01-28 23:41:40 +00:00
dyson
026024aadd Added new files to support the new fast pipes. After the follow-on
commits, pipe performance should increase significantly.  The pipe(2)
system call is currently supported, while fifofs will be added later.
1996-01-28 23:38:26 +00:00
joerg
72b11e691f Make worm.c compile with -Wall -Werror again.
. remove some unused variables
. declare worminit() right this time, it's actually extern (?)
. use wormminphys(), now that it's already there (hope i've got this right)
1996-01-28 23:33:23 +00:00
julian
65e9defd06 Submitted by: rich (which one?)
Another special case for probing multi-CD cdrom drives.

2nd try at this patch.
1996-01-28 22:41:44 +00:00
wollman
c02be74f05 Implement a prototype interface to bus-master IDE DMA on the Triton
chipset.  This does not attempt to do anything special with the timing
on the hope that the BIOS will have done the right thing already.  The
actual interface from the wd driver to the new facility is not
implemented yet (this commit being an attempt at prodding someone else
to do it because looking at the wd driver always confuses the h*** out of me).
1996-01-28 22:16:20 +00:00
jkh
fbcc7783ad Back out the previous change. It's not correct for -current. 1996-01-28 21:51:57 +00:00
jkh
fabcee231e Add an entry for the "MBR-7", whatever that is.
Submitted by:	rich
1996-01-28 20:43:49 +00:00
jkh
f294136eec Man page for the vx driver.
Submitted by:	Frederick Earl Gray <fgray@owlnet.rice.edu>
1996-01-28 20:33:44 +00:00
jkh
da1e719a0f 3c590 driver for FreeBSD
Submitted by:	Frederick Earl Gray <fgray@owlnet.rice.edu>
1996-01-28 20:31:11 +00:00
bde
3a9c20a29c Use umask disk_umask=037 for all (writable) disks. Use umask
tape_umask=017 for all tapes.  This has a significant effect only
for ft and st (they were created with the wrong umask 002 and then
chmod'ed to mode 640; now they are created with mode 660).

Chmod the st control devices (mode 3) to 600.  These need to be
more secure than the st i/o devices, but were less secure.

Use the default umask of 077 for joy0.  002 gave mode 664, which
is insecure.

Use umask 037 for ch*.  Cosmetic.

Removed redundant chmod's.

Sorted case lists for disks.
1996-01-28 19:10:37 +00:00
dyson
b3020b7bf5 An earlier modification had decreased CPU usage, but also
decreased performance.  This essentially undoes that change.
1996-01-28 18:25:54 +00:00
jfieber
dd58a234ad Formatting tweak. 1996-01-28 16:59:05 +00:00
jfieber
8e3db52b37 Add info about distinguishing freebsd versions.
Submitted by:	obrien@cs.ucdavis.edu
1996-01-28 16:36:24 +00:00
phk
fd7d88027b make devfs_add_devswf a little smarter about '/'; 1996-01-28 10:07:55 +00:00
phk
571dda46ed Fix DEVFS, remove unused vars. 1996-01-28 10:02:38 +00:00
joerg
71d56aaf50 Minor but fatal spelling error when merging my code into -current.
Also declared worminit() to avoid a compiler warning.  Seems that the
other SCSI drivers don't declare XXinit() yet, so perhaps we'd also
create a typedef for these func's.
1996-01-28 09:56:04 +00:00
bde
05e0fabe88 Fixed dangling pointer bugs in DIOCSDINFO.
Enabled DEVFS support.  It doesn't work while devfs is mounted
(add_devfs_devsw() doesn't work then), but seems to be safe.
1996-01-28 08:15:44 +00:00
gpalmer
639086d7c7 Add (at long last) an option to say if you want to run the printer
daemon (lpd) or not. Set to run it by default.
1996-01-28 08:08:37 +00:00
rgrimes
cfeedcc0b6 Add missing ${DESTDIR} to afterinstall: target. 1996-01-27 23:57:06 +00:00
wollman
3ebe21e07b Decode configuration for the IDE part of the Triton chipset. This
includes a hack in the probe code: the 82371FB is a multifuction
device, but doesn't properly set the configuration bit which
indicates this.  So, we just hard-wire all 82371FBs as multifunction
devices.

This does not actually make the bus-master IDE stuff work, although
if anyone wants to work on that, I have the databooks that tell
how to use it.
1996-01-27 20:14:32 +00:00
joerg
47d30a2ecf Add wormcontrol. Nope, i didn't forget it this time. :) 1996-01-27 17:57:15 +00:00
joerg
67402d8df8 Totally revamp the man page. (Gack, i didn't even know Peter
had already written one. :)
1996-01-27 17:55:54 +00:00
joerg
20e2709b29 This commit was generated by cvs2svn to compensate for changes in r13652,
which included commits to RCS files with non-trunk default branches.
1996-01-27 17:52:20 +00:00
joerg
a20e1af289 Add a wormcontrol(8) utility. This is needed in order to prepare
worm(4) for actual work.

See the EXAMPLES section in the man page.
1996-01-27 17:52:20 +00:00
joerg
643a8f4acd Add <sys/wormio.h>, containing the declarations that are shared between
kernel and userland.
1996-01-27 17:49:47 +00:00
joerg
21e93e2a9f The Great Merge.
The worm driver is alpha-usable!  I've stuffed everything that is
needed into the kernel driver, including the logic to select
between different vendor's quirks.

Disclaimer: this has by now _only_ been tested on a heavily tweaked
2.0.5R system.  I've done my best to retrofit it into -current, but
i don't have a chance yet to test it in a -current environment.
1996-01-27 17:48:12 +00:00
roberto
9b4e26a129 Add a few questions including where to find the 2.1.0 CD inAustralia,
the fact that 2.1.0 will not install with 4 MB and a few others.
1996-01-27 15:57:07 +00:00
bde
b5ea338f46 [Oops, forgot to commit this together with things that depend on it.]
First attempt at creating devfs entries for sliced devices.  Doesn't
quite work yet, so the heart of it is disabled.

Added bdev and cdev args to dsopen().

Create devfs entries in dsopen() and (unsuccessfully) attempt to make
them go away at the right times.  DEVFS is #undefed at the start so
that this shouldn't cause problems.
1996-01-27 09:34:21 +00:00
bde
4cf50d85ee First attempt at creating devfs entries for sliced devices. Doesn't
quite work yet, so the heart of it is disabled.

Added bdev and cdev args to dsopen().

drivers:
Fixed device names, links, minor numbers and modes.

wd.c:
Started actually supporting devfs.

diskslice.h:
Added devfs tokens to structs (currently 576 of them per disk! :-().

subr_diskslice.c:
Create devfs entries in dsopen() and (unsuccessfully) attempt to make
them go away at the right times.  DEVFS is #undefed at the start so
that this shouldn't cause problems.
1996-01-27 04:18:15 +00:00
bde
b367666afd Allocate DMA bounce buffers only when requested by drivers. Only the
fd and wt drivers need bounce buffers, so this normally saves 32K-1K
of kernel memory.

Keep track of which DMA channels are busy.  isa_dmadone() must now be
called when DMA has finished or been aborted.

Panic for unallocated and too-small (required) bounce buffers.

fd.c:
There will be new warnings about isa_dmadone() not being called after
DMA has been aborted.

sound/dmabuf.c:
isa_dmadone() needs more parameters than are available, so temporarily
use a new interface isa_dmadone_nobounce() to avoid having to worry
about panics for fake parameters.  Untested.
1996-01-27 02:33:48 +00:00
bde
ae64a265a8 Declared new functions isa_dmainit() and isa_dmadone_nobounce().
Sorted and KNFised declarations.
1996-01-27 01:57:02 +00:00
bde
1cdb5a951c Cleaned up unused #includes and some other historical cruft.
Sorted and KNFised declarations.
1996-01-27 01:56:30 +00:00
bde
24c35ad108 Fixed allocation of DMA buffers. The DMA bounce buffers were sometimes
overrun by 2 pages.

Fixed the (unused) values returned from device attach functions.

Fixed checking of unit number in device open functions - don't load bad
pointers or print error messages about the contents of bad pointers.

Removed unused #includes.

asc.c:
Fixed premature setting of flags in ascopen() - copied the better order
in gscopen().

gsc.c:
Fixed conflict handling for drq:
- fail the probe if the configured drq doesn't match the actual drq.
- set the configured drq to match the actual drq in the autoconfig case.

Reviewed by:	Nobody; authors didn't respond to mail.
1996-01-27 00:53:58 +00:00
bde
0f99c673dc Added a `boundary' arg to vm_alloc_page_contig(). Previously the only
way to avoid crossing a 64K DMA boundary was to specify an alignment
greater than the size even when the alignment didn't matter, and for
sizes larger than a page, this reduced the chance of finding enough
contiguous pages.  E.g., allocations of 8K not crossing a 64K boundary
previously had to be allocated on 8K boundaries; now they can be
allocated on any 4K boundary except (64 * n + 60)K.

Fixed bugs in vm_alloc_page_contig():
- the last page wasn't allocated for sizes smaller than a page.
- failures of kmem_alloc_pageable() weren't handled.

Mutated vm_page_alloc_contig() to create a more convenient interface
named contigmalloc().  This is the same as the one in 1.1.5 except
it has `low' and `high' args, and the `alignment' and `boundary'
args are multipliers instead of masks.
1996-01-27 00:13:33 +00:00
wollman
ae614ac290 Delete the if_private[] array in struct ifnet; this turned out to be
of limited utility.  In their place, add bunch of pointers
which will eventually be needed by the polled-interrupt scheme we're working
here.  (It will probably be a while before the code is written and
committed here.)  At the same time, a `void *if_softc' field
was added to the beginning of the structure to make certain driver
writers happier.

The practical upshot of all this is that you need to
recompile utilities such as netstat which manipulate struct ifnet.
1996-01-26 22:09:54 +00:00
wpaul
4e8cc969b8 Change private version of verr() to __verr() and make it static to
avoid potential clash with library function of the same name.
1996-01-26 18:20:56 +00:00
phk
eca1779166 Fix a bug I made in the devfs. 1996-01-26 12:42:39 +00:00
phk
2dd896405c The last part of the ether_sprint -> %6D change.
Sorry for the delay.
(%D is for hexdumping.)
1996-01-26 09:29:29 +00:00
joerg
8b13b00640 Make the numbers for the "superblock backups" fit nicely on the screen,
even for larger partitions.  Until now, partition sizes > 500 MB messed
up the screen.
1996-01-25 23:44:32 +00:00
joerg
a628d85b60 Correctly initialize the `btprobing' variable. It's always been 0,
causing a bogus error message to appear if no board has been fond.
1996-01-25 23:03:07 +00:00
joerg
a00d9f26ca Remove the "no board found at" message, ia rather similar message with
the same information is printed one line below by the generic isa code
anyway.
1996-01-25 23:00:42 +00:00
wollman
6fd0c86ccc Correctly identify the various parts of the Triton chipset. 1996-01-25 20:38:31 +00:00
se
45ff9914bf Add support for multi-function devices. 1996-01-25 18:32:00 +00:00
ache
e764e499b9 Change RUKEYMAP sligtly 1996-01-25 16:37:20 +00:00
ache
3cddd44424 Change mapping slightly 1996-01-25 16:29:41 +00:00
phk
8891fd7f8c Avoid local sprintfs and other printf'isms. 1996-01-25 07:21:50 +00:00
phk
395d897625 Make devfs_add_devfsf() which takes printf style args. 1996-01-25 07:17:31 +00:00