Since r276367 added the virtio_mmio support vtnet_modevent() gets called twice.
This resulted in a memory leak during load and a panic on unload.
Count the loads so we only initialise once (just like cxgbe(4)), and only clean
up in the final unload.
PR: 209428
Submitted by: novel@FreeBSD.org
MFC after: 1 week
Move legacy privilege masks near to their only user.
Move Huntington definitions to the top of hunt_impl.h to prepare
for moving the remaining EF10 definitions to ef10_impl.h.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6343
Falcon support has been removed, so this code only supports Siena.
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6342
The "- 1" is there specifically to enable checking for NUL termination.
I should also admit the rest change was mostly cosmetic and the
overruns can't occur in practice: still I leave them to pacify
static analyzers.
Pointed out by: bde
- By definition, `enum snmp_tc` can't be false (the implied starting sequence
index for the enum is 0). Don't test for it being < 0.
- Staticize `struct snmp_text_conv` to mute a -Wmissing-variable-declarations
warning from clang.
- Remove set but unused variable, ptr, in parse_bridge_id(..) and
parse_bport_id(..) to mute warning from gcc 4.9+.
- Mark value and string unused in snmp_inetaddr2oct(..) and parse_inetaddr(..)
as they're just stub functions.
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
convname and dst are guaranteed to be non-NULL by iconv_open(3).
src is an array. Remove these tests for NULL pointers.
While I'm here, eliminate a strlcpy with a correct but suspicious-looking
calculation for the third parameter (i.e. not a simple sizeof).
Compare the strings in-place instead of copying.
Found by: bdrewery
Found by: Coverity
CID: 1130050, 1130056
MFC after: 3 days
Sponsored by: Dell Inc.
Differential Revision: https://reviews.freebsd.org/D6338
It was used in bsnmpmap.c but was stored in bsnmptools.c; moving the extern
to the header allows us to cover all of our bases for the variable, and allows
_bsnmptools_debug to be used in the future elsewhere -- not just bsnmpmap.c.
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
This has been compiling without warnings with clang/gcc for a while now
Tested with: clang 3.8.0, gcc 4.2.x, gcc 5.x
MFC after: 3 weeks
Sponsored by: EMC / Isilon Storage Division
* Add the siba bus phy/mac/bandwidth clock definitions (TGSLOW*)
* Add the PHY-N register gateway (BWN_PHY_N())
* Add the PHY-N TX phystat1 register - we need to actually fill out
more of the PHY encoding information when we assemble a frame.
* Various ancillary stuff
Nothing uses this yet, but I do have CCK/OFDM somewhat working
in 2GHz mode on a PHY-N device.
Obtained from: b43 (definitions)
may make Coverity think that other negative values of cmd (used
as an index) are possible. Testing < 0 is a more common idiom
in any case.
Reported by: Coverity
CID: 1305629
These firmwares were obtained from the "Chelsio T5/T4 Unified Wire
v2.12.0.3 for Linux" release. Changes since 1.14.4.0 (which is the
firmware in -STABLE branches) are in the "Release Notes" accompanying
the Unified Wire release and are copy-pasted here as well.
22.1. T5 Firmware
+++++++++++++++++++++++++++++++++
Version : 1.15.37.0
Date : 04/27/2016
================================================================================
FIXES
-----
BASE:
- Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where the default ingress
queue was ignored.
- Fixed an issue where adapter failed to load fw by adjusting DRAM frequency.
- Fixed an issue in watchdog which was causing VM bring-up failure after reboot.
- Fixed 40G link failures with some switches when auto-negotiation enabled.
- Fixed to improve on link bring-up time.
- Per port buffer groups size doubled to improve performance.
- Fixed an issue where bogus d3hot bits were set causing traffic stall.
- Fixed an issue where sometimes adapter was not seen after reboot.
- Fixed an issue where iWARP was crashing in conjunction with traffic management.
- Fixed an issue where link failed to come up after removing twinax cable and
inserting optical module.
ETH
- Fixed a link flap issue on T580-CR.
OFLD
- Fixed a potential iSCSI data corruption issue by disabling RxFragEn flag.
FOiSCSI
- Fixed an issue in recovery path where connection was getting closed before
recovery processing was done.
- Fixed an issue in TCP port reuse.
- Fixed an issue in recovery path when large number (>64) of iSCSI connections
were in use.
- Returned ENETUNREACH if IP was not been provisioned yet and driver tried to
use given inerface.
- Fixed an issue where fw was sending ENETUNREACH event for normal tcp
disconnection.
DCBX
- Fixed an issue where iscsi tlv is sent incorrectly to host. (DCBX CEE)
- Fixed an issue where apply bit set for APP id was affecting the ETS and PFC
settings.(DCBX IEEE)
- Fixed an issue where app priority values are not handled correctly in fw.
(DCBX IEEE)
- Fixed an issue where enable/disable dcbx can cause crash. (DCBX CEE,DCBX IEEE)
FOFCoE
- Removed BB6 support.
ENHANCEMENTS
------------
BASE:
- Added new interface to program DCA settings in SGE contexts; allow 32-byte
IQE size
- Added PTP interface fw_ptp_ts to support PTP Frequeny and Offset adjustment.
- Added MPS raw interface.
ETH:
- New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.
OFLD:
- WR opcode is returned to host in cqe error response.
22.2. T4 Firmware
+++++++++++++++++
Version : 1.15.37.0
Date : 04/27/2016
================================================================================
FIXES
-----
BASE:
- Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where default ingress queue
was ignored.
- Fixed an issue in watchdog which was causing VM bring-up failure after reboot.
- Per port buffer groups size doubled to improve performance.
- Fixed an issue where iWARP was crashing in conjunction with traffic management.
FOiSCSI:
- Fixed an issue in recovery path where connection was getting closed before
recovery processing was done.
- Fixed an issue in TCP port reuse.
- Fixed an issue in recovery path when large number (>64) of iSCSI connections
were in use.
- Returned ENETUNREACH if IP had not been provisioned yet and driver tried to
use given inerface.
DCBX
- Fixed an issue where iscsi tlv is sent incorrectly to host.(DCBX CEE)
- Fixed an issue where enable/disable dcbx can cause crash in firmware.(DCBX CEE)
FOiSCSI
- Fixes an issue where fw was sending ENETUNREACH event for normal tcp
disconnection.
FOFCoE
- Removed BB6 support.
ENHANCEMENTS
------------
BASE:
- Added MPS raw interface.
ETH:
- New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.
================================================================================
Obtained from: Chelsio Communications
MFC after: 6 weeks
Relnotes: yes
Sponsored by: Chelsio Communications
disabled, however when we enable it it will default to assume memory is
not cache-coherent, unless either the tag was created or the parent was
marked as cache-coherent.
Obtained from: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
if specific CPU features are not present.
Some simulation environments, e.g. gem5, have been found to require more
TLB management from the kernel in certain setups. It is currently unclear why.
Turning on the workaround_erratum383 seems to help and make problems (panics)
go away.
Given this is a fairly uncommon environment so far, allowing the workaround
to be manually enabled from loader in order to make debugging and comparing
traces easier, but also to allow gem5 run FreeBSD in X86 timing mode, seems
to be the least intrusive option for now until the issue if fully understood.
Sponsored by: DARPA/AFRL
Reviewed by: kib, alc (earlier)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D6206
