This change is similar to the one done in r286171 for
tst.ipv4localtcp.ksh. This not only reduces the requirements on the
system used for testing but results also in a graceful teardown of
the TCP connection.
Reviewed by: gnn@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16276
The code imported from opensolaris was depending on ping supporting
UDP for sending probes. Since this is not supported by ping on FreeBSD
use a perl script instead.
The remote test requires the usage of ksh93, so state that in the
sheband.
Enable the local test, but keep the remote test disabled, since it
requires a remote machine on the LAN.
Reviewed by: markj@, gnn@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16268
so that a reference from a concurrently destroyed mapping is observed
during the current scan.
Reviewed by: kib, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16277
- Ever since the workaround for the silicon bug of TSO4 causing MAC hangs
was committed in r295133, CSUM_TSO always got disabled unconditionally
by em(4) on the first invocation of em_init_locked(). However, even with
that problem fixed, it turned out that for at least e. g. 82579 not all
necessary TSO workarounds are in place, still causing MAC hangs even at
Gigabit speed. Thus, for stable/11, TSO usage was deliberately disabled
in r323292 (r323293 for stable/10) for the EM-class by default, allowing
users to turn it on if it happens to work with their particular EM MAC
in a Gigabit-only environment.
In head, the TSO workaround for speeds other than Gigabit was lost with
the conversion to iflib(9) in r311849 (possibly along with another one
or two TSO workarounds). Yet at the same time, for EM-class MACs TSO4
got enabled by default again, causing device hangs. Therefore, change the
default for this hardware class back to have TSO4 off, allowing users
to turn it on manually if it happens to work in their environment as
we do in stable/{10,11}. An alternative would be to add a whitelist of
EM-class devices where TSO4 actually is reliable with the workarounds in
place, but given that the advantage of TSO at Gigabit speed is rather
limited - especially with the overhead of these workarounds -, that's
really not worth it. [1]
This change includes the addition of an isc_capabilities to struct
if_softc_ctx so iflib(9) can also handle interface capabilities that
shouldn't be enabled by default which is used to handle the default-off
capabilities of e1000 as suggested by shurd@ and moving their handling
from em_setup_interface() to em_if_attach_pre() accordingly.
- Although 82543 support TSO4 in theory, the former lem(4) didn't have
support for TSO4, presumably because TSO4 is even more broken in the
LEM-class of MACs than the later EM ones. Still, TSO4 for LEM-class
devices was enabled as part of the conversion to iflib(9) in r311849,
causing device hangs. So revert back to the pre-r311849 behavior of
not supporting TSO4 for LEM-class at all, which includes not creating
a TSO DMA tag in iflib(9) for devices not having IFCAP_TSO4 set. [2]
- In fact, the FreeBSD TCP stack can handle a TSO size of IP_MAXPACKET
(65535) rather than FREEBSD_TSO_SIZE_MAX (65518). However, the TSO
DMA must have a maxsize of the maximum TSO size plus the size of a
VLAN header for software VLAN tagging. The iflib(9) converted em(4),
thus, first correctly sets scctx->isc_tx_tso_size_max to EM_TSO_SIZE
in em_if_attach_pre(), but later on overrides it with IP_MAXPACKET
in em_setup_interface() (apparently, left-over from pre-iflib(9)
times). So remove the later and correct iflib(9) to correctly cap
the maximum TSO size reported to the stack at IP_MAXPACKET. While at
it, let iflib(9) use if_sethwtsomax*().
This change includes the addition of isc_tso_max{seg,}size DMA engine
constraints for the TSO DMA tag to struct if_shared_ctx and letting
iflib_txsd_alloc() automatically adjust the maxsize of that tag in case
IFCAP_VLAN_MTU is supported as requested by shurd@.
- Move the if_setifheaderlen(9) call for adjusting the maximum Ethernet
header length from {ixgbe,ixl,ixlv,ixv,em}_setup_interface() to iflib(9)
so adjustment is automatically done in case IFCAP_VLAN_MTU is supported.
As a consequence, this adjustment now is also done in case of bnxt(4)
which missed it previously.
- Move the reduction of the maximum TSO segment count reported to the
stack by the number of m_pullup(9) calls (which in the worst case,
can add another mbuf and, thus, the requirement for another DMA
segment each) in the transmit path for performance reasons from
em_setup_interface() to iflib_txsd_alloc() as these pull-ups are now
done in iflib_parse_header() rather than in the no longer existing
em_xmit(). Moreover, this optimization applies to all drivers using
iflib(9) and not just em(4); all in-tree iflib(9) consumers still
have enough room to handle full size TSO packets. Also, reduce the
adjustment to the maximum number of m_pullup(9)'s now performed in
iflib_parse_header().
- Prior to the conversion of em(4)/igb(4)/lem(4) and ixl(4) to iflib(9)
in r311849 and r335338 respectively, these drivers didn't enable
IFCAP_VLAN_HWFILTER by default due to VLAN events not being passed
through by lagg(4). With iflib(9), IFCAP_VLAN_HWFILTER was turned on
by default but also lagg(4) was fixed in that regard in r203548. So
just remove the now redundant and defunct IFCAP_VLAN_HWFILTER handling
in {em,ixl,ixlv}_setup_interface().
- Nuke other redundant IFCAP_* setting in {em,ixl,ixlv}_setup_interface()
which is (more completely) already done in {em,ixl,ixlv}_if_attach_pre()
now.
- Remove some redundant/dead setting of scctx->isc_tx_csum_flags in
em_if_attach_pre().
- Remove some IFCAP_* duplicated either directly or indirectly (e. g.
via IFCAP_HWCSUM) in {EM,IGB,IXL}_CAPS.
- Don't bother to fiddle with IFCAP_HWSTATS in ixgbe(4)/ixgbev(4) as
iflib(9) adds that capability unconditionally.
- Remove some unused macros from em(4).
- Bump __FreeBSD_version as some of the above changes require the modules
of drivers using iflib(9) to be recompiled.
Okayed by: sbruno@ at 201806 DevSummit Transport Working Group [1]
Reviewed by: sbruno (earlier version), erj
PR: 219428 (part of; comment #10) [1], 220997 (part of; comment #3) [2]
Differential Revision: https://reviews.freebsd.org/D15720
When a NFSv4.1 client mount using pNFS detects a failure trying to do a
Renew (actually just a Sequence operation), the code would simply try
again and again and again every 30sec.
This would tie up the "nfscl" thread, which should also be doing other
things like Renews on other DSs and the MDS.
This patch adds code which closes down the TCP connection and marks it
defunct when Renew detects an failure to communicate with the DS, so
further Renews will not be attempted until a new working TCP connection to
the DS is established.
It also makes the call to nfscl_cancelreqs() unconditional, since
nfscl_cancelreqs() checks the NFSCLDS_SAMECONN flag and does so while holding
the lock.
This fix only applies to the NFSv4.1 client whne using pNFS and without it
the only effect would have been an "nfscl" thread busy doing Renew attempts
on an unresponsive DS.
MFC after: 2 weeks
events are passed through by lagg(4) ever since r203548. Deactivation of
this capability by default due to lagg(4) was already not done for ixgbev(4)
and has been - although inadvertently - broken when em(4)/igb(4)/lem(4) and
ixl(4) were converted to iflib(9) in r311849 and r335338 respectively.
Reviewed by: erj
Differential Revision: https://reviews.freebsd.org/D15720 (part of)
Using padvance() requires undoing its append of '/' and prevents adjusting
its '%' logic to allow most directories with '%' in PATH.
No functional change is intended.
Normally, we can get away with just reading the 1k buffer for the
string, since the placement of the data is generally no where near the
end of the file. However, it's possible that the string is within the
last 1k of the file, in which case the read will fail, and we'll not
produce the proper records needed for devmatch to work. By reading
using EF_SEG_READ_STRING, we automatically work around these problems
while still retaining safety.
This fix a problem with devmatch where we wouldn't load certain
modules (like ums). This didn't always happen (my tree didn't exhibit
it, while nathan's did because his optimization options were more
agressive).
Reported by: nathanw@
Simple fix to address panics relating to setting IPV6_TCLASS
with setsockopt(). The premise of this change is that it is
ok to call malloc with M_NOWAIT while holding a lock on the
in6p.
If it later turns out that it is not ok, then major surgery
will be required, as ip6_setpktopt() will have to be fixed
(as it also calls malloc with M_NOWAIT) which pulls in the
ip6_pcbopts(), ip6_setpktopts(), ip6_setpktopt() call chain.
Submitted by: Jason Eggnet
Reviewed by: rrs, transport, sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16201
This corresponds to the latest status (hasn't changed in 9+
years) from openbsd of ld80/ld128 powl, and source cpowf, cpow,
cpowl (the complex power functions for float complex, double
complex, and long double complex) which are required for C99
compliance and were missing from FreeBSD. Also required for
some numerical codes using complex numbered Hamiltonians.
Thanks to jhb for tracking down the issue with making
weak_reference compile on powerpc.
When asked to review, bde said "I don't like it" - but
provided no actionable feedback or superior implementations.
Discussed with: jhb
Submitted by: jmd
Differential Revision: https://reviews.freebsd.org/D15919
Doing so ensures that all threads sharing the pmap have a consistent
view of the mapping. This fixes the problem described in the commit
log message for r329254 without the overhead of an extra page fault
in the common case. (Now that all pmap_enter() implementations are
similarly modified, the workaround added in r329254 can be removed,
reducing the overhead of COW faults.)
With this change we can reuse the PV entry from the old mapping,
potentially avoiding a call to reclaim_pv_chunk(). Otherwise, there is
nothing preventing the old PV entry from being reclaimed. In rare
cases this could result in the PTE's page table page being freed,
leading to a use-after-free of the page when the updated PTE is written
following the allocation of the PV entry for the new mapping.
Reviewed by: br, markj
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D16261
Without this patch, the client side NFSv4.1 pNFS code erroneously did writes
and commits to both DS mirrors using the TCP connection of the first one.
For my test setup this worked, since I have both DSs running on the same
machine, but it would have failed when the DSs are on separate machines.
This patch fixes the code to use the correct TCP connection for each DS.
This patch should only affect the NFSv4.1 client when using "pnfs" mounts
to mirrored DSs.
MFC after: 2 weeks
Since we don't have /usr/bin/ksh, use a generic way of specifying
ksh. Some of the tests only run with ksh93, so use this shell
for these tests. Two of the tests don't have the execute bit set,
so fix this, too.
Reviewed by: markj@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16270
add support for explicitly requesting that pmap_enter() create a 2 or 4 MB
page mapping. (Essentially, this feature allows the machine-independent
layer to create superpage mappings preemptively, and not wait for automatic
promotion to occur.)
Export pmap_ps_enabled() to the machine-independent layer.
Add a flag to pmap_pv_insert_pde() that specifies whether it should fail or
reclaim a PV entry when one is not available.
Refactor pmap_enter_pde() into two functions, one by the same name, that is
a general-purpose function for creating PDE PG_PS mappings, and another,
pmap_enter_4mpage(), that is used to prefault 2 or 4 MB read- and/or
execute-only mappings for execve(2), mmap(2), and shmat(2).
Reviewed by: kib
Tested by: pho
Differential Revision: https://reviews.freebsd.org/D16246
In some cases it seems that the PHY mode can only be identified by
matching against the corresponding device node name in the FDT. r334880
broke this for the case where the node name contains a unit address.
Fix the problem by allowing a match in that case.
Reviewed by: andrew, sbruno
Tested by: sbruno
Differential Revision: https://reviews.freebsd.org/D16259
It can occur during ordinary use of softupdates, or perhaps if writes to the
underlying media fail (causing bufs to be redirtied). Either way, it is not
particularly actionable.
Reviewed by: imp, kib
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D16258
Synproxy was accidentally broken by r335569. The 'return (action)' must be
executed for every non-PF_PASS result, but the error packet (TCP RST or ICMP
error) should only be sent if the packet was dropped (i.e. PF_DROP) and the
return flag is set.
PR: 229477
Submitted by: Andre Albsmeier <mail AT fbsd.e4m.org>
MFC after: 1 week
The issue found with gcc6 build (originally on illumos, confirmed on FreeBSD).
Mark it __unused.
Differential Revision: https://reviews.freebsd.org/D13109
When shutting down a vnet jail pf_shutdown() clears the remaining states, which
through pf_clear_states() calls pf_unlink_state().
For synproxy states pf_unlink_state() will send a TCP RST, which eventually
tries to schedule the pf swi in pf_send(). This means we can't remove the
software interrupt until after pf_shutdown().
MFC after: 1 week
o Fix the parsing of the device path. a last minute change terminated
it too soon.
o Kill setting LINES. We don't need to do it, and even if we did hard
coding it to 24 is wrong.
o Now that the console is working again for the loader, adjust the
printfs to be more in line with other platforms.
note that r336270's commit message was slightly incorrect. It changed
the default setting of the console to honor the ConOut
variable. Overrides via the command line are still possible, and we
use the devices in ConOut to set the proper console. If, for example,
serial cosnole is specified, we'll set console to "efi" if ConOut has
a serial port list and to either "efi comconsole" or "comconsole efi"
if not depending on whether -D or -D -h was specified.
RelNotes: Yes
Sponsored by: Netflix
For server machines, ComOut is set to the set of devices that the efi
console suppots. Parse it to see if we have serial, video or both.
Make that take precidence over the command line args. boot1.efi parses
them, but loader.efi doesn't. It's not clear where to read boot.conf
from, so we don't do that. The command line args can still be set via
efibootmgr, which is more inline with the UEFI boot manager to replace
that. These args are typically used only to set serial vs video and
the com speed line. We can infer that from ComOut, so do so.
Remember the com speed and hw.uart.console to match.
RelNotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D15917
So long as the TCP connection to a pNFS DS isn't shared with other DSs,
it can be closed down when the DS is being disabled in the pNFS client.
This causes any RPCs in progress to fail.
This patch only affects the NFSv4.1 pNFS client when errors occur
while doing I/O on a DS.
MFC after: 2 weeks
Xilinx Ultrascale+ are based on Cortex-A53 and use existing
UART driver (uart_dev_cdnc). Enable it in arm64 GENERIC config.
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
