emulated or when the vcpu incurs an exception. This matches the CPU behavior.
Remove special case code in HLT processing that was clearing the interrupt
shadow. This is now redundant because the interrupt shadow is always cleared
when the vcpu is resumed after an instruction is emulated.
Reported by: David Reed (david.reed@tidalscale.com)
MFC after: 2 weeks
CARP devices are created with advskew set to '0' and once you set it to
any other value in the valid range (0..254) you can't set it back to zero.
The code in question is also used to prevent that zeroed values overwrite
the CARP defaults when a new CARP device is created. Since advskew already
defaults to '0' for newly created devices and the new value is guaranteed
to be within the valid range, it is safe to overwrite it here.
PR: 194672
Reported by: cmb@pfsense.org
In collaboration with: garga
Tested by: garga
MFC after: 2 weeks
socket-buffer implementations, introduce a return value for MCLGET()
(and m_cljget() that underlies it) to allow the caller to avoid testing
M_EXT itself. Update all callers to use the return value.
With this change, very few network device drivers remain aware of
M_EXT; the primary exceptions lie in mbuf-chain pretty printers for
debugging, and in a few cases, custom mbuf and cluster allocation
implementations.
NB: This is a difficult-to-test change as it touches many drivers for
which I don't have physical devices. Instead we've gone for intensive
review, but further post-commit review would definitely be appreciated
to spot errors where changes could not easily be made mechanically,
but were largely mechanical in nature.
Differential Revision: https://reviews.freebsd.org/D1440
Reviewed by: adrian, bz, gnn
Sponsored by: EMC / Isilon Storage Division
- Remove unsupported "bus" field from "struct pci_dev".
- Fix logic inside "pci_enable_msix()" when the number of allocated
interrupts are less than the number of available interrupts.
- Update header files included from "list.h".
- Ensure that "idr_destroy()" removes all entries before destroying
the IDR root node(s).
- Set the "device->release" function so that we don't leak memory at
device destruction.
- Use FreeBSD's "log()" function for certain debug printouts.
- Put parenthesis around arguments inside the min, max, min_t and max_t macros.
- Make sure we don't leak file descriptors by dropping the extra file
reference counts done by the FreeBSD kernel when calling falloc()
and fget_unlocked().
MFC after: 1 week
Sponsored by: Mellanox Technologies
Split functions that initialize various pf parts into their
vimage parts and global parts.
Since global parts appeared to be only mutex initializations, just
abandon them and use MTX_SYSINIT() instead.
Kill my incorrect VNET_FOREACH() iterator and instead use correct
approach with VNET_SYSINIT().
PR: 194515
Differential Revision: D1309
Submitted by: glebius, Nikos Vassiliadis <nvass@gmx.com>
Reviewed by: trociny, zec, gnn
The QCA955x has more mux interrupts going on - and the AR934x actually does,
but I cheated and assigned wlan and pcie to the same interrupt line.
They are, there's just a status register mux that I should've been using.
Luckily this isn't too bad a change in itself - almost all of the
Atheros MIPS configurations use a _BASE file to inherit from.
Except PB92, which I should really fix up at some point.
The AR934x will use the legacy apb for now until I write its replacement.
The QCA955x SoC I'm doing bring-up on will have a separate qca955x_apb.c
implementation that includes hooking into IP2/IP3 and doing further
interrupt demuxing as appropriate.
APB mux.
It's larger than the AR71xx because it needs to replace the nexus
for some devices (notably wifi) and the wifi driver (if_ath_ahb.c)
reads the SPI data directly at early boot whilst it's memory mapped
in.
I'm eventually going to rip it out and replace it with a firmware
interface similar to what exists for the if_ath_pci.c path -
something early on (likely something new that I'll write) will
suck in the calibration data into a firmware API blob and that'll
be accessed from if_ath_ahb.c.
But, one thing at a time.
Tested:
* QCA955x SoC, AP135 development board
Avoid use of register variables, which some compilers (e.g. clang)
don't like. It makes the code a little clearer as well.
This allows a clang 3.5 built powerpc world to run (tested in a jail).
MFC after: 1 week
of the scan API.
The eventual aim is to have 'ieee80211_scan.c' have the net80211 and
driver facing scan API to start, finish and continue doing scanning
while 'ieee80211_swscan.c' implements the software scanner that
runs the scan task, handles probe request/reply bits, configures
the VAP off-channel, changes channel and does the scanning bits.
For NICs that do no scanning at all, the existing code is needed.
ath(4) and most of the other NICs (dumb USB ones in particular)
do little to no scan offload - it's all done in software.
Some NICs may do single channel at a time scanning; I haven't really
checked them out in detail.
iwn(4), the upcoming 7260 driver stuff, the new Qualcomm Atheros
11ac chipsets and the Atheros mobile/USB full-offload chips all
have complete scan engines in firmware. We don't have to drive
any of it at all - the firmware just needs to be told what to scan,
when to scan, how long to scan. It'll take care of going off
channel, pausing TX/RX appropriately, sending sleep notification
to the AP, sending probe requests and handling probe responses.
It'll do passive/active scan itself. It's almost completely
transparent to the network stack - all we see are scan notifications
when it finishes scanning each channel and beacons/probe responses
when it does its thing. Once it's done we get a final notification
that the scan is complete, with some scan results in the message.
The iwn(4) NICs handle doing active scanning too as an option
and will handle waiting appropriately on 5GHz passive channels
before active scanning.
There's some more refactoring, tidying up and lock assertions to
sprinkle around to tidy this whole thing up before I turn swscan.c
into another set of ic methods to override by the driver or
alternate scan module. So in theory this is all one big no-op
commit. In theory.
Tested:
* iwn(4) 5200, STA mode
* ath(4) 6205, STA mode
* ath(4) - various NICs, AP mode
may perform a blocking memory allocation, which is unsafe when holding a
mutex.
Differential Revision: https://reviews.freebsd.org/D1443
Reviewed by: rwatson
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
may also halt in C2 and not just C3 (it seems that in some cases the BIOS
advertises its C3 state as a C2 state in _CST). Just play it safe and
disable both C2 and C3 states if a user forces the use of the TSC as the
timecounter on such CPUs.
PR: 192316
Differential Revision: https://reviews.freebsd.org/D1441
No objection from: jkim
MFC after: 1 week
Previously elftoolchain readelf(1) produced correct description text
only for Linux note types.
Upstream elftoolchain ticket #473
Differential Revision: https://reviews.freebsd.org/D1428
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
has support for the .codeXX directives). However, it is desirable, for
a time, to allow kernels to be built with clang 3.4. Historically, it
has been advantageous to allow stable X-1 to build kernels the old
way (so long as the impact of doing so is small), and this restores
that ability.
Also, centralize the addition of ${ASM_CFLAGS.${.IMPSRC}}, place it in
kern.mk rather than kern.pre.mk so that all modules can benefit, and
give the same treatment to CFLAGS in kern.mk as well.
the knowledge of mbuf layout, and in particular constants such as M_EXT,
MLEN, MHLEN, and so on, in mbuf consumers by unifying various alignment
utility functions (M_ALIGN(), MH_ALIGN(), MEXT_ALIGN() in a single
M_ALIGN() macro, implemented by a now-inlined m_align() function:
- Move m_align() from uipc_mbuf.c to mbuf.h; mark as __inline.
- Reimplement M_ALIGN(), MH_ALIGN(), and MEXT_ALIGN() using m_align().
- Update consumers around the tree to simply use M_ALIGN().
This change eliminates a number of cases where mbuf consumers must be aware
of whether or not mbufs returned by the allocator use external storage, but
also assumptions about the size of the returned mbuf. This will make it
easier to introduce changes in how we use external storage, as well as
features such as variable-size mbufs.
Differential Revision: https://reviews.freebsd.org/D1436
Reviewed by: glebius, trasz, gnn, bz
Sponsored by: EMC / Isilon Storage Division
