imp
e83e1fa0c0
These appear to be necessary for a pci cardbus card, but not for laptops.
...
Ifdef them out until I figure out the right way to configure this.
This solves Nate's hangs as well as Anders Andersson's.
MCF: Soon.
2001-08-21 07:38:13 +00:00
dillon
b158be16ce
Fix bug in physmem_est calculation - the kernel_map size was not being
...
converted into pages.
Fix bug in maxbcache calculation, nbuf must be tested against maxbcache
rather then physmem_est.
Obtained from: bde
2001-08-21 07:20:06 +00:00
sobomax
2e043273c0
STAILQ_LAST() macro takes 3 arguments, not 1.
2001-08-21 06:19:29 +00:00
ken
067f3e7b94
Fix some style inconsistencies introduced in rev 1.10, as well as some
...
other inconsistencies that I missed in my review of rev 1.7. Also fix
a cut-n-paste error from an earlier revision.
2001-08-21 05:23:37 +00:00
peter
a6fa1409cb
Detect a certain type of PCIBIOS brain damage. For some reason,
...
some bios vendors took it apon themselves to "censor" the
host->pci bridges from PCIBIOS callers, even when the caller
explicitly asks for them. This includes certain Compaq machines
(eg: DL360) and some laptops.
If we detect this, shut down pcibios and revert to using IO
port bashing.
Under -current, apcica does a better job anyway.
2001-08-21 03:10:55 +00:00
peter
4694b279a2
Make COMPAT_43 optional again. XXX we need COMPAT_FBSD3 etc for this
...
stuff.
2001-08-21 02:32:59 +00:00
gshapiro
d8dc7487e0
sendmail 8.11.6 has been imported
2001-08-21 01:42:08 +00:00
gshapiro
e6211c8022
Update import information
2001-08-21 01:33:05 +00:00
gshapiro
897671a2e8
Resolve conflicts from sendmail 8.11.6 import
2001-08-21 01:32:34 +00:00
gshapiro
acff40ffd8
This commit was generated by cvs2svn to compensate for changes in r82017,
...
which included commits to RCS files with non-trunk default branches.
2001-08-21 01:31:44 +00:00
gshapiro
289b381b31
Import sendmail 8.11.6
2001-08-21 01:31:44 +00:00
jake
d8a2be30ba
Use register g6 to point to a small stack for svaing alternate globals
...
during trap handlers.
Implement ptrace_set_pc FWIW.
Initialize the pcb window scratch area in setregs(), and setup user
registers as specified by the SCD.
Submitted by: tmm
2001-08-21 00:07:37 +00:00
mjacob
e6e6a6f268
move forward the ability to MAKEDEV zs devices for TurboLaser
2001-08-21 00:03:28 +00:00
jake
5fd36af7c1
Handle the pcb window scratch area in cpu_fork.
...
Implement cpu_exit.
Submitted by: tmm
2001-08-21 00:02:54 +00:00
jake
da861eea01
Save and restore %fprs and %y, which are unused by kernel code, but
...
may be used by 32bit userland code.
Implement cpu_throw().
Submitted by: tmm
2001-08-21 00:01:28 +00:00
jake
e8076017f8
Disable interrupts when calling openfirmware.
2001-08-21 00:00:18 +00:00
jake
56800e0ac6
Rename fp_init_pcb to fp_init_proc. Set the FEF bit in fprs register;
...
according the SCD it should be set if no user trap handler in set.
Submitted by: tmm
2001-08-20 23:56:19 +00:00
jake
eed959d0e2
Add definitions for new assembler code.
2001-08-20 23:53:11 +00:00
jake
45ab2da400
Catch up with new trap entry point names.
2001-08-20 23:51:40 +00:00
jake
48bd94ad31
Add variables needed by hardware watchpoint support.
...
Submitted by: tmm
2001-08-20 23:50:48 +00:00
jake
cf997765b7
Add code for supporting hardware watch points.
...
Submitted by: tmm
2001-08-20 23:50:08 +00:00
jake
c5b148f1dd
Add a system call trap type and syscall() call request handler.
...
Also add support for hardware watch point traps.
Submitted by: tmm
2001-08-20 23:43:43 +00:00
jake
bedeb98a21
Add support for splitting the register windows on entry to the
...
kernel from usermode. The remaining user windows are spilled
to the pcb as necessary. The user land window fault handlers
fill directly from the pcb on return.
Add system call entry points.
Submitted by: tmm
2001-08-20 23:40:31 +00:00
jake
0eadd1a70f
db_expr_t is signed.
2001-08-20 23:35:15 +00:00
jake
df930f49e5
Add definitions for bits in condition code register and the load store
...
unit control registers. Move tstate definitions to their own file.
Submitted by: tmm
2001-08-20 23:34:46 +00:00
jake
ed59961343
Add a definition for the load store unit control register.
2001-08-20 23:31:41 +00:00
brian
bf0ff75162
Make the copyright consistent.
...
Previously approved by: Charles Mott <cmott@scientech.com>
2001-08-20 22:57:33 +00:00
obrien
355b16412a
Sync globals.h up with the other platforms. There is still some cruft in
...
here, but now all the platforms have the same cruft. Consistantly spell
the `struct globaldata *' "globalp".
Reviewed by: peter
2001-08-20 21:29:16 +00:00
obrien
13444b820b
+ do not hard code where a port may be installed to
...
+ uses `mkisofs' rather than `mkhybrid' as the new mkisofs is the merger
of the two
+ checks for `setcdboot's existsance and tries to pkg_add it if needed
+ removes English contraction
Approved by: jkh
2001-08-20 21:22:33 +00:00
obrien
f44504864a
+ back out my `iso' target
...
+ allows one to set _R so one can more easily make an iso after the fact,
in the directory `make release' was issued in
+ changes name from miniboot to miniinst since we make other bootable ISOs
also (and we might confuse someone)
Approved by: jkh
2001-08-20 21:22:01 +00:00
bmah
b262150ceb
New release note: pppd(8) no longer world-executable/readable.
...
Submitted by: kris
2001-08-20 20:45:55 +00:00
iedowse
22613ae234
Avoid sleeping while holding a mutex in dounmount(). This problem
...
has existed for a long time, but I made it worse a few months ago
by by adding calls to VFS_ROOT() and checkdirs() in revision 1.179.
Also, remove the LK_REENABLE flag in the lockmgr() call; this flag
has been ignored by the lockmgr code for 4 years. This was the only
remaining mention of it apart from its definition.
Reviewed by: jhb
2001-08-20 19:16:31 +00:00
brian
5ba6edf189
Handle snprintf() returning < -1.
2001-08-20 18:13:50 +00:00
fenner
1a9e5ae59a
Fix fencepost error causing creation of 0-length mbufs when the boundary
...
between header and data fell on the boundary between two mbufs.
2001-08-20 17:58:46 +00:00
bmah
3c068b84c3
Typo and markup fixes.
...
Submitted by: Alex Kapranoff <kapr@acm.org>
2001-08-20 17:31:47 +00:00
mjacob
38b8e2e37e
Clean up some ways in which we set defaults for SCSI cards
...
that do not have valid NVRAM. In particular, we were leaving
a retry count set (to retry selection timeouts) when thats
not really what we want. Do some constant string additions
so that LOGDEBUG0 info is useful across all cards.
MFC after: 2 weeks
2001-08-20 17:28:32 +00:00
mjacob
24b1b8c5e7
Add MBOX_GET_PCI_PARAMS alias.
...
MFC after: 2 weeks
2001-08-20 17:26:45 +00:00
dillon
d2c2ab2442
Conditionalize VM_SWZONE_SIZE_MAX and VM_BCACHE_SIZE_MAX so MD sections
...
that don't define these constants don't break.
2001-08-20 16:29:13 +00:00
brian
903d158fae
Handle snprintf() returning < 0 (not just -1)
...
MFC after: 2 weeks
2001-08-20 15:44:17 +00:00
brian
f6df81abf7
Better snprintf() handling.
...
Prompted by: bde
2001-08-20 15:43:14 +00:00
ru
ad3a696e29
Even more libss removal.
2001-08-20 15:41:15 +00:00
brian
9e766e7f13
Handle snprintf() returning < 0 (not just -1)
...
MFC after: 2 weeks
2001-08-20 15:09:34 +00:00
brian
894d298c86
Handle ftp_copycommand() and ftp_copyresult() potentially returning < -1.
2001-08-20 15:01:06 +00:00
brian
6820e8fb2d
Handle snprintf() returning < 0 (not just -1)
...
MFC after: 2 weeks
2001-08-20 14:53:05 +00:00
brian
5bd90784a6
Handle snprintf() returning -1.
...
MFC after: 2 weeks
2001-08-20 14:46:40 +00:00
brian
3b24d8f2af
Handle snrintf overflows.
...
Spotted by: bde
2001-08-20 13:44:13 +00:00
brian
d48c427cd5
Handle snprintf() returning -1.
...
MFC after: 2 weeks
2001-08-20 13:24:39 +00:00
brian
016b1a255a
Handle snprintf() returning -1.
...
MFC after: 2 weeks
2001-08-20 12:56:45 +00:00
kris
110fc843a0
Mark some functions as __printflike() and/or taking const char * arguments
...
instead of char *.
MFC after: 2 weeks
2001-08-20 12:53:36 +00:00
nik
0e618921c1
Note that submitted patches are assumed to be under the same license as
...
the file they patch.
2001-08-20 12:52:59 +00:00