Fix an assertion in zpool that causes a crash when running any "zpool add"
command on a spare that contains a replacing vdev with a spare child.
This likely affects Illumos, too.
PR: 225546
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D14138
If a zfs pool contains a replacing vdev (either created manually by "zpool
replace" or by zfsd(8) via autoreplace by physical path) and then new spares
get added to the pool, zfsd shouldn't use one to replace the drive that is
already being replaced. That's a waste of resources that just slows down
the rebuild.
PR: 225547
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
illumos/illumos-gate@e9b7d6e7f7https://www.illumos.org/issues/8972:
'zfs holds -H' does not properly output content in scripted mode. It uses a
tab instead of two spaces, but it still pads column widths with spaces when
it should not.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Allan Jude <allanjude@freebsd.org>
illumos/illumos-gate@4ae5f5f06chttps://www.illumos.org/issues/8652:
Clang and GCC prefer to use unsigned ints to store enums. With Clang, that
causes tautological comparison warnings when comparing a zfs_prop_t or
zpool_prop_t variable to the macro ZPROP_INVAL. It's likely that error
handling code is being silently removed as a result.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Alan Somers <asomers@gmail.com>
8641 "zpool clear" and "zinject" don't work on "spare" or "replacing" vdevs
illumos/illumos-gate@2ba5f978a4https://www.illumos.org/issues/8641:
"zpool clear" and "zinject -d" can both operate on specific vdevs, either
leaf or interior. However, due to an oversight, neither works on a "spare"
or "replacing" vdev. For example:
sudo zpool create foo raidz1 c1t5000CCA000081D61d0 c1t5000CCA000186235d0 spare c
1t5000CCA000094115d0
sudo zpool replace foo c1t5000CCA000186235d0 c1t5000CCA000094115d0
$ zpool status foo pool: foo
state: ONLINE
scan: resilvered 81.5K in 0h0m with 0 errors on Fri Sep 8 10:53:03 2017
config:
NAME STATE READ WRITE CKSUM
foo ONLINE 0 0 0
raidz1-0 ONLINE 0 0 0
c1t5000CCA000081D61d0 ONLINE 0 0 0
spare-1 ONLINE 0 0 0
c1t5000CCA000186235d0 ONLINE 0 0 0
c1t5000CCA000094115d0 ONLINE 0 0 0
spares
c1t5000CCA000094115d0 INUSE currently in use
$ sudo zinject -d spare-1 -A degrade foo
cannot find device 'spare-1' in pool 'foo'
$ sudo zpool clear foo spare-1
cannot clear errors for spare-1: no such device in pool
Even though there was nothing to clear, those commands shouldn't have
reported an error. by contrast, trying to clear "raidz1-0" works just fine:
$ sudo zpool clear foo raidz1-0
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Alan Somers <asomers@gmail.com>
8898 creating fs with checksum=skein on the boot pools fails ungracefully
illumos/illumos-gate@9fa2266d9ahttps://www.illumos.org/issues/8898:
# zfs create -o checksum=skein rpool/test
internal error: Result too large
Abort (core dumped)
Not a big deal per se, but should be handled correctly.
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
PR: 222199
illumos/illumos-gate@9a551dd645https://www.illumos.org/issues/8897:
# zpool online -e test mirror-1
Assertion failed: nvlist_lookup_string(tgt, "path", &pathname) == 0, file ../common/libzfs_pool.c, line 2558, function zpool_vdev_online
Abort (core dumped)
Not a big deal per se, but should be handled gracefully, same way as 'offline' and 'online' without '-e'.
Also reported as: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=221408
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
illumos/illumos-gate@a3b2868063https://www.illumos.org/issues/8677
We want to be able to run channel programs outside of synching context.
This would greatly improve performance of channel program that just gather
information, as we won't have to wait for synching context anymore.
This feature should introduce the following:
- A new command line flag in "zfs program" to specify our intention to
run in open context.
- A new flag/option within the channel program ioctl which selects the
context.
- Appropriate error handling whenever we try a channel program in
open-context that contains zfs.sync* expressions.
- Documentation for the new feature in the manual pages.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
These return the jail ID and jail name for the traced process,
respectively, and are analogous to "zonename" on Solaris/illumos.
"zonename" is now aliased to "jailname".
Also add some stress tests for the new variables.
Submitted by: Domagoj Stolfa <domagoj.stolfa@gmail.com>
Reviewed by: dteske (previous version)
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D13877
The bug would cause incorrect behaviour when attempting to override
an already set environment variable with -x setenv, as long as the
variable is not the last one in the array.
Reported by: Samuel Lepetit <slepetit@apple.com>
MFC after: 2 weeks
This allows one to override the environment for processes created with
dtrace -c. By default, the environment is inherited.
This support was originally merged from illumos in r249367 but was lost
when the commit was later reverted and then brought back piecemeal.
Reported by: Samuel Lepetit <slepetit@apple.com>
MFC after: 2 weeks
Add basic command line parsing test coverage for these utilities. The tests
were automatically generated based on their man pages. These tests can be
expanded by hand for more thorough coverage. The aim is to generate very
basic amount of test coverage for all the utilities in the base system.
Tests generated via: https://github.com/shivansh/smoketestsuite/
Submitted by: shivansh
Reviewed by: asomers
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D12424
We can't link an executable using -m32 until the lib32 phase of a
buildworld, though the build works fine when executing make from
cddl/usr.sbin/dtrace/tests. Some other solution will need to be found.
SPA_MAXBLOCKSIZE is 16 MB and having such a large object on the stack is
not nice in general and it could cause some confusing failures in the
single-user mode where the default stack size of 8 MB is used.
I expect that the upstream would make the same change.
MFC after: 1 week
The test creates a D library with a "depends_on library" pragma
referencing a non-existent library, and expects compilation to fail.
However, as far as I can tell, libdtrace is supposed simply abort
compilation of the library in this case, and continue. This behaviour
is desirable when adding libraries which depend on optional KLDs, for
example.
MFC after: 1 week
When we encounter a USDT probe in a weak symbol, we emit an alias for
the probe function symbol. Such aliases are named differently from the
aliases we emit for probes in local functions, so make sure to take that
difference into account when resizing the output object file's string
table. Otherwise, we underrun the string table buffer.
PR: 223680
Previously some unimplemented libdtrace routines printed the function,
file and line number, followed by "DOODAD." That is not particularly
informative, so replace it with a message reporting the actual issue.
Sponsored by: The FreeBSD Foundation
illumos/illumos-gate@0a0551200e0a0551200ehttps://www.illumos.org/issues/640
du(1), df(1m), ls(1), and swap(1m) all include a copy (it appears literally
copied) of the 'number_to_scaled_string' function in their source. This should
be moved to a shared library and all 4 commands should use this instead.
FreeBSD note: of all libcmdutils functionality ZFS (and other illumos
contrib code) currently uses only nicenum() function (which is similar
to humanize_number but has some formatting differences). For this
reason I decided to not port the whole library. As a result, nicenum.c
from libcmdutils is compiled into libzfs and libzpool. This is a bit
ugly, but works. If one day we are forced to create libillumos, then
the file should be moved to that library.
Reviewed by: Sebastian Wiedenroth <wiedi@frubar.net>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Yuri Pankov <yuripv@gmx.com>
Approved by: Dan McDonald <danmcd@joyent.com>
Author: Jason King <jason.brian.king@gmail.com>
MFC after: 2 weeks
Previously, this didn't work because L2ARC devices' labels don't contain
pool GUIDs. Modify zfsd so that the pool GUID won't be required:
lib/libdevdctl/guid.h
Change INVALID_GUID from a uint64_t constant to a function that
returns an invalid Guid object. Remove the void constructor.
Nothing uses it, and it violates RAII.
cddl/usr.sbin/zfsd/case_file.h
cddl/usr.sbin/zfsd/case_file.cc
Allow CaseFile::Find to match a CaseFile based on Vdev GUID alone.
In CaseFile::ReEvaluate, attempt to online devices even if the newly
arrived device has no pool GUID.
cddl/usr.sbin/zfsd/vdev_iterator.cc
Iterate through a pool's cache devices as well as its regular
devices.
Reported by: avg
Reviewed by: avg
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D12791
Previously, zpool_read_all_labels was trying to do 256KB reads, which are
greater than the default MAXPHYS and therefore must go through the slow,
unsafe AIO path. Shrink these reads to 112KB so they can use the safe, fast
AIO path instead.
MFC after: 1 week
X-MFC-With: 324568
Sponsored by: Spectra Logic Corp
- Fix a number of typos.
- Replace some illumos-specific references.
- Note that a type definition of kind CTF_K_FUNCTION may be followed by
a null type identifier in order to provide 4-byte alignment for the
next type definition.
MFC after: 2 weeks
illumos/illumos-gate@72d3dbb9ab72d3dbb9abhttps://www.illumos.org/issues/8300
Prior to integrating the mdocml update to 1.14.1, fix issues found by
new version, especially the "new sentence, new line" style rule.
FreeBSD note: this revision merges only the changes to the CTF manual
page. The changes to the ZFS pages cannot be applied directly.
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Approved by: Gordon Ross <gwr@nexenta.com>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
Discussed with: avg
MFC after: 2 weeks
The upstream has converted their manual page to the same format as we
have, so we can use the upstream version with minimal modifications.
The current modifications are:
- different zpool.cache path
- different manual sections for zdb, zfs, zpool commands
igor reports a few minor issues, it would be nice to fix them both in
FreeBSD and in the upstream.
MFC after: 3 weeks
illumos/illumos-gate@4923c69fdd4923c69fdd
FreeBSD note: the manual page is to be updated separately.
https://www.illumos.org/issues/8067
Add an option to zdb to print a literal embedded block pointer supplied on the
command line:
zdb -E [-A] word0:word1:...:word15
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@ed4e7a6a5ced4e7a6a5chttps://www.illumos.org/issues/7340
When -o origin=<snapshot> is specified as part of a ZFS receive, that origin
should override the automatic detection in libzfs.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Paul Dagnelie <pcd@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@d5f26ad812d5f26ad812https://www.illumos.org/issues/5142
the current libzfs only allows simple disk and mirror setup for boot pool, as
loader does support booting from raidz, this feature will remove raidz
restriction from boot pool setup.
FreeBSD note: we have long supported this feature, this commit only
removes a small difference in libzfs.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Andrew Stormont <andyjstormont@gmail.com>
Reviewed by: Albert Lee <trisk@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Toomas Soome <tsoome@me.com>
MFC after: 3 weeks
illumos/illumos-gate@aab04418a7aab04418a7https://www.illumos.org/issues/6268
The zfs diff command presents a description of the changes that have occurred
to files within a filesystem between two snapshots. If a file is renamed, the
tool is capable of reporting this, e.g.:
cd /some/zfs/dataset/subdir
mv file0 file1
Will result in a diff record like:
R /some/zfs/dataset/subdir/file0 -> /some/zfs/dataset/subdir/file1
Unfortunately, it seems that rename detection only uses the base filename to
determine if a file has been renamed or simply modified. This leads to
misreporting only the original filename, omitting the more relevant destination
filename entirely. For example:
cd /some/zfs/dataset/subdir
mv file0 ../otherdir/file0
Will result in a diff entry:
M /some/zfs/dataset/subdir/file0
But it should really emit:
R /some/zfs/dataset/subdir/file0 -> /some/zfs/dataset/otherdir/file0
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Justin Gibbs <gibbs@scsiguy.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Joshua M. Clulow <josh@sysmgr.org>
MFC after: 3 weeks
illumos/illumos-gate@ad2760acbdad2760acbdhttps://www.illumos.org/issues/7571
ZFS displays the default value for non-present readonly numeric (and index)
properties. However, these properties default values are not meaningful.
Instead, we should display a "-", indicating that they are not present. For
example, on a version-12 pool, the usedby* properties are not available, but
they show up as the incorrect value "0":
1. zfs get all test12
...
test12 usedbysnapshots 0 -
test12 usedbydataset 0 -
test12 usedbychildren 0 -
test12 usedbyrefreservation 0 -
We will be introducing more sometimes-present numeric readonly properties, so
it would be nice to fix this.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@dfd5965f7edfd5965f7e
FreeBSD note: the manual page is to be updated separately.
https://www.illumos.org/issues/6392
When given a pool name via -e, zdb would attempt an import. If it
failed, then it would attempt a verbatim import. This behavior is
not always desirable so a -V switch is added to zdb to control the
behavior. When specified, a verbatim import is done. Otherwise,
the behavior is as it was previously, except no verbatim import
is done on failure.
a5778ea242
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Richard Yao <ryao@gentoo.org>
MFC after: 3 weeks
illumos/illumos-gate@ed61ec1da9ed61ec1da9
FreeBSD note: this commit does not update the manual page.
The original change includes conversion of the manual page from *roff format
to mandoc format. So, it is hard to extract the content change from
that. I am going to replace our zdb manual page, which is an earlier
independent conversion, with a slighly modified version of the upstream page.
https://www.illumos.org/issues/6410
This is primarily intended to ease debugging & testing ZFS when one is only
interested in things like the on-disk location of a specific object's blocks,
but doesn't know their object id. This allows doing things like the following
(FreeBSD-based example):
# zpool create -f foo da0
# dd if=/dev/zero of=/foo/1 bs=1M count=4 >/dev/null 2>&1
# zpool export foo
# zdb -vvvvv -o "ZFS plain file" foo /1
Object lvl iblk dblk dsize lsize %full type
8 2 16K 128K 3.99M 4M 100.00 ZFS plain file (K=inherit) (Z=inherit)
168 bonus System attributes
dnode flags: USED_BYTES USERUSED_ACCOUNTED
dnode maxblkid: 31
path /1
uid 0
gid 0
atime Thu Apr 23 22:45:32 2015
mtime Thu Apr 23 22:45:32 2015
ctime Thu Apr 23 22:45:32 2015
crtime Thu Apr 23 22:45:32 2015
gen 7
mode 100644
size 4194304
parent 4
links 1
pflags 40800000004
Indirect blocks:
0 L1 DVA[0]=<0:c19200:600> DVA[1]=<0:10800019200:600> [L1 ZFS
plain file] fletcher4 lz4 LE contiguous unique double size=4000L/200P birth=7L/
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
MFC after: 3 weeks
illumos/illumos-gate@de05b58863de05b58863https://www.illumos.org/issues/3871
GCC 4.5.3 on Gentoo Linux did not like a few of the changes made in the issue
3604 patch. It printed an error and a couple of warnings:
../../cmd/zdb/zdb.c: In function 'dump_bpobj':
../../cmd/zdb/zdb.c:1257:3: error: 'for' loop initial declarations are only
allowed in C99 mode
../../cmd/zdb/zdb.c:1257:3: note: use option -std=c99 or -std=gnu99 to compile
your code
../../cmd/zdb/zdb.c: In function 'dump_deadlist':
../../cmd/zdb/zdb.c:1323:8: warning: too many arguments for format
../../cmd/zdb/zdb.c:1323:8: warning: too many arguments for format
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Richard Yao <ryao@gentoo.org>
MFC after: 3 weeks
illumos/illumos-gate@64723e361164723e3611https://www.illumos.org/issues/6866
Need this for #6865.
To be generally more scripting-friendly, overload this issue with adding '-q'
option which should skip printing any label information.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Yuri Pankov <yuri.pankov@nexenta.com>
MFC after: 3 weeks
7280 Allow changing global libzpool variables in zdb and ztest through command line
illumos/illumos-gate@0e60744c980e60744c98https://www.illumos.org/issues/7280
zdb is very handy for diagnosing problems with a pool in a safe and
quick way. When a pool is in a bad shape, we often want to disable some
fail-safes, or adjust some tunables in order to open them. In the
kernel, this is done by changing public variables in mdb. The goal of
this feature is to add the same capability to zdb and ztest, so that
they can change libzpool tuneables from the command line.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Pavel Zakharov <pavel.zakharov@delphix.com>
MFC after: 3 weeks
