Commit Graph

65145 Commits

Author SHA1 Message Date
green
e990e27894 Modify a "You don't exist" message, pretty rude for transient YP failures. 2001-09-27 18:54:42 +00:00
bmah
6b8ebdf52a MFCs noted: ancontrol(8) -M, nl(1). 2001-09-27 18:06:22 +00:00
wpaul
1fa857a10f Fix typo: BGGPHY -> BRGPHY in one of the #defines I added the other day. 2001-09-27 17:32:49 +00:00
gad
1053a31527 Basically rewrite the sortq() routine which is used by 'lpc clean' and
'lpc tclean'.  In some obscure cases, the previous version could cause a
valid user job to be removed (by 'clean'), due to invalid assumptions in
the sort routine.  This was a rare problem, unless ctlinfo.c is compiled
with 'LEAVE_TMPCF_FILES' turned on (to check what that rtn was doing).

Reviewed by:	Lack of outcry on -audit and freebsd-print@bostonradio.org
MFC after:	10 days
2001-09-27 17:16:53 +00:00
obrien
fe8d76fb16 We need to build ``.depend'' early in the "build-tools" for the GCC
"build-tools".  If we do not do this, the "depend" stage of
"buildworld" will build ``.depend'' and it will record the wrong
library and header dependencies (DESTDIR=${WORLDTMP}).  Even worse,
the "all" stage may clobber build-architecture-format build tools
built in the "build-tools" stage with target-architecture-format ones.

Submitted by:	ru
2001-09-27 17:14:33 +00:00
jlemon
9bbfbca6ee Gate low level console output on mtx_lock_spin(&sio_lock), if the
sio_lock has been initialized.  This prevents the low level console
output (kernel printf) from clobbering the sio settings if the system
happens to be in the middle of comstart().
2001-09-27 17:00:25 +00:00
luigi
0886aa51b6 Add entries for vmware interfaces. 2001-09-27 16:48:13 +00:00
luigi
244185f005 Enable the use of wildcards in the #ethertable section of
/etc/hosts to map MAC addresses to hostnames.

Main use is to get addresses for vmware interfaces.
2001-09-27 16:47:45 +00:00
imp
0523beb4c1 Add note about buildworld being fixed. 2001-09-27 15:43:04 +00:00
luigi
c3c6ae5ea7 Fix typo in a comment.
MFC-after: 3 days
2001-09-27 12:01:57 +00:00
luigi
af2cc9a068 Remove unused (and duplicate) struct ip_opts which is never used,
not referenced in Stevens, and does not compile with g++.
There is an equivalent structure, struct ipoption in ip_var.h
which is actually used in various parts of the kernel, and also referenced
in Stevens.

Bill Fenner also says:
... if you want the trivia, struct ip_opts was introduced
in in.h SCCS revision 7.9, on 6/28/1990, by Mike Karels.
struct ipoption was introduced in ip_var.h SCCS revision 6.5,
on 9/16/1985, by... Mike Karels.

MFC-after: 3 days
2001-09-27 11:53:22 +00:00
murray
ed54ab2f19 Update a comment to reflect the param.c -> subr_param.c move.
PR:		kern/30766
Submitted by:	Kevin Way <kevin.way@overtone.org>
2001-09-27 09:58:30 +00:00
julian
3176497499 Quick hack to print out the non-standard pppoe used by 3com 2001-09-27 08:02:27 +00:00
murray
2f621db662 Be consistent with the way we talk about sysctl values.
PR:		docs/30343
Submitted by:	Giorgos Keramidas <charon@labs.gr>
2001-09-27 07:26:16 +00:00
alfred
2e676e5bfc This driver can talk to the Rio600 as well, make it happen.
Hardware (and patience) provided by: Andrew J Caines <A.J.Caines@halplant.com>
2001-09-27 06:01:20 +00:00
brooks
5b9d7b1bce NULL commit due to misunderstanding "cvs commit -m <blah>". The
previous log message "/home/brooks/ng_gif.message" should have read:

Add a pair of new netgraph nodes.  The ng_gif node is like ng_ether
except that it works on gif interfaces.  The ng_gif_demux node attaches
to an ng_gif node to allow separate processing or discarding of
different types of encapsulated traffic.
2001-09-27 03:14:17 +00:00
jlemon
ebe90110b6 Return EINVAL if the passed intr is out of bounds.
PR: 30857
Submitted by: David Xu <davidx@viasoft.com.cn>
MFC: 1 week
2001-09-27 02:46:47 +00:00
peter
bc122022f9 Tidy up nfsm_build usage. This is only partially finished. 2001-09-27 02:33:36 +00:00
murray
422ba83d3c Tip Correction : s/seconds/minutes/
PR:		docs/30844
Submitted by:	Andrew <andrew@ugh.net.au>
2001-09-27 00:43:28 +00:00
brooks
33cc1da19c The initial commit contained an error in the license, this is the
correct one.
2001-09-27 00:04:29 +00:00
peter
95b45b12da Oops, forgot to rm this last time. 2001-09-26 23:57:25 +00:00
brooks
375454f578 /home/brooks/ng_gif.message 2001-09-26 23:50:17 +00:00
brooks
e8d737fac9 Use LIST_ macros instead of TAILQ_ macros to be more like NetBSD.
Obtained from:	NetBSD
2001-09-26 23:37:15 +00:00
brooks
b1392c6a3c The number of ccd(4) devices is no longer set at compile time so stop
trying to do it in the examples and config files.
2001-09-26 22:41:02 +00:00
brooks
2a6102d3e8 Call securelevel_gt with a credential. Also, s/p/td->td_proc/.
Submitted by:	LINT
2001-09-26 22:02:01 +00:00
brooks
b9f9861d89 Include sys/proc.h for the definition of securelevel_ge().
Submitted by:	LINT
2001-09-26 21:53:20 +00:00
obrien
f047e940b4 Unconditionally use basename.c source vs. only doing this if the libc we
are linking against does not have basename().  There is a buffer overflow
bug in lib/libc/gen/basename.c rev 1.1.  There is no way for us to test
what revision of basename() we have in libc, thus this change.

Requested by:	ru
2001-09-26 20:51:51 +00:00
rwatson
9eed33b643 o Re-enable support of system file flags in jail() by adding back the
PRISON_ROOT to the suser_xxx() check.  Since securelevels may now
  be raised in specific jails, use of system flags can still be
  restricted in jail(), but in a more configurable way.
o Users of jail() expecting system flags (such as schg) to restrict
  jail()'s should be sure to set the securelevel appropriately in
  jail()'s.
o This fixes activities involving automated system flag removal in
  jail(), including installkernel and friends.

Obtained from:	TrustedBSD Project
2001-09-26 20:44:41 +00:00
rwatson
c3b8575001 o When performing a securelevel check as part of securelevel_ge() or
securelevel_gt(), determine first if a local securelevel exists --
  if so, perform the check based on imax(local, global).  Otherwise,
  simply use the global value.
o Note: even though local securelevels might lag below the global one,
  if the global value is updated to higher than local values, maximum
  will still be used, making the global dominant even if there is local
  lag.

Obtained from:	TrustedBSD Project
2001-09-26 20:41:48 +00:00
rwatson
90600b5b23 o Modify kern.securelevel MIB entry to return a local securelevel, if
one is present in the current jail, otherwise, to return the global
  securelevel.
o If the securelevel is being updated, require that it be greater than
  the maximum of local and global, if a local securelevel exists,
  otherwise, just maximum of the global.  If there is a local
  securelevel, update the local one instead of the global one.
o Note: this does allow local securelevels to lag behind the global one
  as long as the local one is not updated following a global increase.

Obtained from:	TrustedBSD Project
2001-09-26 20:39:48 +00:00
rwatson
96b0d9e4f3 o Initialize per-jail securelevel from global securelevel as part of
jail creation.

Obtained from:	TrustedBSD Project
2001-09-26 20:37:15 +00:00
rwatson
e4e5df5075 o Introduce pr_securelevel, which holds a per-jail securelevel.
Obtained from:	TrustedBSD Project
2001-09-26 20:36:08 +00:00
rwatson
4e4d85b5d1 o Modify ufs_setattr() so that it uses securelevel_gt() instead of
direct variable access.

Obtained from:	TrustedBSD Project
2001-09-26 20:31:37 +00:00
rwatson
a8da1b45a2 o Modify access control checks in mmap() to use securelevel_gt() instead
of direct variable access.

Obtained from:	TrustedBSD Project
2001-09-26 20:29:39 +00:00
rwatson
3ac68ecf7b o securelevel_gt() patches came from pre-KSE alpha -- this revision
fixes the compile and uses td->td_proc instead of p.

Obtained from:	TrustedBSD Project
2001-09-26 20:27:23 +00:00
rwatson
fe36bed05d o Modify pc98 syscons code to use securelevel_gt() instead of
direct variable checks.  (Yet another API to perform direct hardware I/O).

Obtained from:	TrustedBSD Project
2001-09-26 20:26:32 +00:00
rwatson
1a997efe57 o Modify the access control checks for the ia64 /dev/mem (and friends)
to use securelevel_gt() instead of direct variable checks.

Obtained from:	TrustedBSD Project
2001-09-26 20:24:23 +00:00
asmodai
1036376e73 Add ERRORS section.
Mention thread safety and async-cancel safety status [not].
Add standards compliancy references.
Note strtol() is preferred over atoi().

MFC after:	2 weeks
2001-09-26 20:22:44 +00:00
rwatson
d2bcf9062d o Modify access control checks in linux_iopl() to use securelevel_gt()
rather than direct variable checks.  (Yet another API to perform
  direct hardware I/O.)

Obtained from:	TrustedBSD Project
2001-09-26 20:22:38 +00:00
rwatson
ec4feb1e54 o Modify pcvt ioctl() security checks to use securelevel_gt() instead
of direct securelevel variable checks.  (Yet another API to perform
  direct hardware I/O using KDENABIO.)

Obtained from:	TrustedBSD Project
2001-09-26 20:21:28 +00:00
rwatson
53363e1502 o Modify spigot_open() to use securelevel_gt() instead of direct
securelevel variable checks.

Obtained from:	TrustedBSD Project
2001-09-26 20:20:05 +00:00
rwatson
c9c82b43c3 o Modify generic specfs device open access control checks to use
securelevel_ge() instead of direct securelevel variable checks.

Obtained from:	TrustedBSD Project
2001-09-26 20:18:26 +00:00
rwatson
20f61b8442 o Modify syscons ioctl securelevel checks to use securelevel_gt() (oh look,
yet another API to do direct hardware I/O access.)

Obtained from:	TrustedBSD Project
2001-09-26 20:17:15 +00:00
rwatson
6f5b301241 o Modify open() and close() for /dev/random to use securelevel_gt() instead
of direct securelevel variable checks.

Obtained from:	TrustedBSD Project
2001-09-26 20:15:42 +00:00
rwatson
9da4982eda o Modify access control code for /dev/pci device to use securelevel_gt()
instead of direct securelevel variable test.

Obtained from:	TrustedBSD Project
2001-09-26 20:14:03 +00:00
rwatson
5918c1e495 o Modify access control code for the CAM SCSI pass-through device to
use securelevel_gt() instead of direct securelevel variable test.

Obtained from:	TrustedBSD Project
2001-09-26 20:13:16 +00:00
asmodai
176ff42ed5 Be explicit about the POSIX version it conforms to [in this case 1990].
Put the error comment under the more appropriate ERRORS section.
2001-09-26 20:10:10 +00:00
rwatson
82b4fa83fc o Modify i386_set_ioperm() to use securelevel_gt() instead of
direct securelevel variable checks.

Obtained from:	TrustedBSD Project
2001-09-26 20:08:15 +00:00
rwatson
955613d62b o Modify device open access control for /dev/mem and friends to use
securelevel_gt() instead of direct securelevel variable checks.

Obtained from:	TrustedBSD Project
2001-09-26 20:08:02 +00:00
rwatson
823d828036 o Modify IPFW and DUMMYNET administrative setsockopt() calls to use
securelevel_gt() to check the securelevel, rather than direct access
  to the securelevel variable.

Obtained from:	TrustedBSD Project
2001-09-26 19:58:29 +00:00